VCOPS through multiple vCenters not in bound mode

Similar Questions

• Reporting to include custom attributes of Vm and organized through multiple vcenters.

  Hello
  We are just moving our production test vfoglight solution & have you come across a bit of a weird one. We had a report / discovers that would list all virtual machines in our virtual Center and displays the custom attributes in a nice - good for the management report, form etc. However, we are moving to a new instance of virtual center & we have a test instance too - all are present in vfoglight, but our report draws only the custom of the original vcentre attributes. I'm not wcf script guru, but I gave it a good look & can't see a way forward - the hero of any script out there who could take a look and help out?
  Moreover, do you think I could put in a request for support for this one & get any joy?

  Hope someone can help - I'll post all the files needed etc.

  Kind regards

  Jonathan

  Thought of it at the end - on the second vcenter vmware foglight agent did not have the ability to collect custom attributes in the service.config file set to true. After true and restart the collector and the connector, everything was fine.

• Multiple VCenters in one VSphere Client

  Kinda new to this but just curious, can you have multiple VCenters in a single client VSphere? Currently I have 6 VCenters I log in, I have therefore 6 vsphere client running.

  Welcome to the community.

  You can configure in bound mode. According the current scenario of you, you have already configured the vcente. If you need to add them in to a single pane view vcenter.

  Here's a nice blog that help you solve your problem.

  hope you find interesting.

  http://www.VKernel.ro/blog/configuring-VMware-vCenter-Server-linked-mode

  Thank you

• HP g60-125nr notebook pc will not stay in mode 'sleep'

  does anyone know why my laptop of hp g60-125nr will not remain in mode 'sleep' when I'm done using it. It lights itself after 30 minutes

  Hello

  Have you gone through the steps in the documents?
  If you need help on the specific steps it please let me know who and I will try to provide more help. If you try to make a step and it does not please let me know what it was.

• Find all occurrences of a term, through multiple Word documents and examine each instance in its local context (i.e. extracted)

  Hi all

  I'm looking for an easy way to find all occurrences of a term, through multiple Word documents and review of each instance of the word in its local context (i.e. extracted) without having to open each document.

  For example, if I want to search the term "religious atmosphere", the search results would be something like:

  Paper 22: '.. '. but the religious atmosphere had not evolved to the point where... »

  Paper 22: "...". not that the religious atmosphere was still too controversial for a settlement... »

  Document 35: "...". If anything, the religious atmosphere was still little developed for a city... »

  Document 35: "...". it in no way improve the religious atmosphere until the decision was... »

  Paper 42: '.. '. up to - what point, the religious atmosphere was very collegial with all the elements of... »

  Any Microsoft or utility 3 rd-party which can put each instance-by-side and in a context extract would be a real, real help!

  Any ideas?

  Thank you

  Jay

  Ken is perhaps more familiar with the Agent Ransack, I am, but a quick check she finds every instance of a string of text and shows the term in the context of a single line subject to the following:

  • At the end of the search, a list of the files found is accompanied by some statistics.
  • If you select one of the files found, each 'hit' for this file is displayed in the context of a single line.  In other words, you get a list of hits in context as in your original question.  Instead, you get a list of, say, 42 documents and then if you have selected the Document 22, you will see:
    • «.. but the religious atmosphere had not evolved to the point where... »
    • «.. . not that the religious atmosphere was still too controversial for a settlement... »
  • The display of content seems to work with OK * .doc, *.docx and files *.pdf; not so many other types of files - even if it looks for text in all kinds of other files.

  Agent Ransack is free.  Download and try it.  If you don't like, just uninstall.

• vRA: identity device or vSphere SSO when there are multiple vCenters (each with their own SSO) in the environment?

  The installer: We have multiple vCenters each with their own SSO. We must build a minimum install vRA lab 6.1 and used the SSO to the vCenter which is the endpoint lab (and ended up having problems when this vCenter SSO had to be rebuilt and in turn liquid reconstruction vRA). Building on a vRA 6.2 Distributed Lab (based on deployment in the 6.1 reference architecture) to validate our production plan and decided to use the identity.

  Question: For a production buildout there is no reason not to use the device of the identity (scalability, performance, lack of HA)? If you are using vSphere SSO, when there are multiple vCenters one that should be used for SSO of vRA? If that vSphere SSO is never removed (say on the whole things are replaced by a central SSO for all vCenters rather than each on their own, or some issue needs to be rebuilt) is there a clean way to repoint SSO vRA without a reconstruction?

  Post edited by: RebeccaW (removed unrelated to Postgres question)

  What I did in this case is to build a fresh cluster SSO using vCenter SSO and pointing vCAC on this one. It becomes my main source of SSO and I slowly vCenters point and other components to it overtime. You usually put vCAC SSO signed certificates and generally I find people vCenter SSO deployment in this way. To remedy this trying to modify an existing SSO vCenters and risk having to reinstall your VC because you missed the CERT, simply create a new. This also alleviates a changing overtime vCenter and spoil the vCAC SSO. The unit of identity cannot be clustered or joining existing areas of SSO. So if you are looking for HA and scale which probably does not cut it.

• My page display mode live view, but not in design mode.

  In DW CC 2014 and 2015 CC DW, my page display mode live view, but not in design mode. When I switch to Design view, I see only the grid and nothing else. ????

  DW, especially the latest version, requires a clean code and valid for many functions to work correctly. Chances are, there are a few code errors in your HTML view Design of the data warehouse can not handle, but browsers and the Live View can.

  Run the validator at http://validator.w3.org/nu for a list of errors and correct all found your page.

  If you have a clean and valid code, but the problem persists, post a link to your current page, or all of the code and css here in the forum (don't use e-mail, it will not come through) so we can take a look at what's going on.

• Find entities within multiple vCenters

  Well... now that my brain is wrecked near I ask for help

  I'm doing a script to search for an entity as a whole of the Vcenters. I have to put the name of the entity, the Type (I give to make this variable...) and the Vcenter... Only two types of information from different vcenters.

  Example:

  Name	Type
  CL002-01	Cluster
  Vm001-POC	VirtualMachine

  The challenge for this task is to reduce the response time... The old writing back information, but a lot of time is wasted.

  I came here and my brain won't work more... Any help?

  Add: a question... is it possible to connect to multiple Vcenters using 'orders-work' and use the connection information of them somehow?

  #Add-PSSnapin VMware.VimAutomation.Core
  #Add-PSSnapin VMware.VumAutomation
  #. "%programfiles%\VMware\Infrastructure\vSphere PowerCLI\Scripts\Initialize-PowerCLIEnvironment.ps1"
  # Adds the base cmdlets
  Add-PSSnapin VMware.VimAutomation.Core -EA SilentlyContinue
  # Set to multiple VC Mode 
  if(((Get-PowerCLIConfiguration -Scope Session).DefaultVIServerMode) -ne "Multiple") {
      Set-PowerCLIConfiguration -DefaultVIServerMode Multiple -Scope AllUsers -Confirm:$false | Out-Null
      Set-PowerCLIConfiguration -DefaultVIServerMode Multiple -Scope User -Confirm:$false | Out-Null
      Set-PowerCLIConfiguration -DefaultVIServerMode Multiple -Scope Session -Confirm:$false | Out-Null
  }
  $count = 0
  Function Get-INFOS{
      param($dcInfo)
      
      Get-Inventory -Location $dcInfo
      
  }
  Function Find{   
      
      foreach ($info in $finalOUTPUT){
          if($info.Name -match "$typed*"){
          
              $infoFound = $info.Name
              $vcFound = ((($info.uid.split("@"))[1]).split(":"))[0]
          
              Write-host "
              Result Found($count):
                  Nome: $infoFound
                  VCenter: $VCFound
              " -ForegroundColor Green
              $count = $count +1
          }
      }
  }
  Function Load{
  $vCenters= import-csv lista_vcenters.csv -Header("Vcenter")
  $finalOUTPUT = @()
  #$finalOUTPUT = "" | Select-Object VC, EntityType, Entity
   
  Write-Host ("Getting the Inventory info from {0} vCenters." -f $vCenters.Length)
   
  foreach ($vCenter in $vCenters) {
          Start-job -scriptblock{  
      $vc = Connect-VIServer $vCenter.Vcenter -WarningAction SilentlyContinue
        
      if (!$vc) {
    Write-Host "Failure connecting to the vCenter $vCenter."
    exit
   }      
      $dcs = Get-Datacenter -Server $vc
      
      foreach ($dc in $dcs) {
          $vcname = $vCenter.vcenter
          Write-host " "
          Write-Host "Getting info from $vcname" -ForegroundColor Green
            $finalOUTPUT += Get-INFOS $dc
      }
          
      Disconnect-VIServer $vc -Confirm:$false
      } | Wait-Job
  }
  }
  Load
  $typed = Read-Host "Type the name of the Entity you want to find:"
  Find
  while(((Read-Host "Do you want to start a new Search?") -eq "y")){
      
      $count = 0    
      Clear
      
      $typed = Read-Host "Type the name of the Entity you want to find:"
      if($count -lt 1){
          Write-Host "No Results Found!" -ForegroundColor Red
      }
      Find
  }
  
  

  When you run too many jobs in parallel and thus focus on memory and CPU, the total duration of the session, then if you run them in batches.

  With the Invoke-Command cmdlet, you use the ThrottleLimit parameter, which allows better control how much desired parallelism.

  See also example 2 the Start-Job cmdlet.

• Inventory report - multiple vCenters

  Hello group,

  I am trying to run a report of inventory using the script below. When it is executed on a vCenter only the output is great, but when I try to run the same report on multiple vCenters then the output has the values of the first vCenter in the script for others as well... So in this case the script runs first on vcenter01 and prints the output and then runs on vcenter02 but prints only the same values of vcenter01... Pls help...

  $vcenters = "vcenter01", "vcenter02".
  $portvc = "443".

  SE connect-VIServer $vcenters - port $portvc

  $vcreport = @)
  {Foreach ($vcserver to $vcenters)
  $intyhosts = get-VMHost | Name sort
  $intyvms = get - VM | Where {($_.)} PowerState - eq "Receptor")} | Name sort
  $intyds = get-Datastore. where {$_.} Type - eq "VMFS" - and $_. Extensiondata.Summary.MultipleHostAccess}
  $nohosts = $intyhosts. County
  $novms = $intyvms. County
  
  $vcrow = "" | Select 'vCenter Name', 'Center', 'Clusters', 'ESXi Hosts","VMs","VMFS data warehouses.
  $vcrow. "' vCenter name" = $vcserver
  $vcrow. "' Data centers ' = (get-data center |) SELECT name. mesure-objet) .count
  $vcrow. "' Clusters ' = (Get-Cluster |) SELECT name. mesure-objet) .count
  $vcrow. "' ESXi Hosts ' = ($intyhosts). County
  $vcrow. "' Virtual Machines ' = ($intyvms). County
  $vcrow. "" VMFS data warehouses "= .count ($intyds)
  $vcreport += $vcrow
  }

  Kind regards

  VMSavvy

  Hello, VMSavvy-

  The results you see are due to the 'DefaultVIServerMode' of your PowerCLI instance configuration.  When it is "multiple" and make you a Get - VM, it gets for example, VMS in all connected vCenters.

  So you can change your code a couple of different ways in order to get info from both single vCenter.

  One way would be to change the location to connect to vCenter servers give - navigate the script block Foreach Connect-VIServer and have simply plug the $vcserver current in this iteration of the Foreach loop.  Then, at the end of the script Foreach block, add a logout-VIServer-confirm: $false to disconnect.  The next iteration through will connect to the following server vCenter.

  Another way would be to add the server to the GET setting-* cmdlets.  Thus, for example, the line that gets the VMHosts would change something like:

  ...$intyhosts = Get-VMHost -Server $vcserver | Sort Name...
  

  That tells the cmdlet to contact the vSphere server specified in the request.  Preventing counties apparently duplicate that have seen you.

  How does do for you?

• Linking multiple vcenters powercli

  I know that you can connect to multiple vcenters, right to the point.

  If I do

  to connect-VIServer servera, serverb, and serverc (entry of username and passwd)

  the only active vcenter is serverc. (the last in my command "connect-VIServer" line.

  What gives?

  I need to run a script to analyze the vcenters all at the same time. Of course, I can't run against each vcenter but I hope I don't have to.

  Thank you!!!

  When you run $DefaultVIServers , it returns with vCenter all which you are connected.

  If not run Set-PowerCLIConfiguration - multiple DefaultVIServerMode and try to connect multiple vcenter

• Error starting data recovery - "your CPU does not support long mode.

  Hello

  When I turn on the VM data recovery, and after that he begins the boot process, it displays a message "your CPU does not support long mode. Use a 32-bit distribution"

  Data recovery is installed on an ESX 4.0 update1 then the ESX is installed on a VMware Workstation 6.5.2 as a virtual machine in my home test environment.

  My processor is a 64 bit CPU (AMD Phenom 9950 Quad-Core).

  I wonder if this message is because the ESX is running in a virtual machine on the workstation may be that it not only Duke that the processor is a 64-bit?

  Someone at - he of the idea?

  Thank you

  Marcos

  You can run the 64-bit if clients your ESX is a virtual machine. VMware Workstation does not pass through the VT extensions that are necessary for the performance of a 64-bit as VDR host.

• Netflix bought through iTunes does not give me the option 4K

  Netflix bought through iTunes does not give me the option 4K

  What, instead, have you done so far? Netflix Checked site help or a FAQ section? Contacted Netflix? If none of these give a solution contacted iTunes Support (http://reportaproblem.apple.com)?

• can you run two sessions of firefox, in privacy and confidentiality not in a mode

  You can run two Firefox sessions, one in privacy and confidentiality not in a mode.
  Basically, in chrome, I can connect facebook with 2 different account, I opened got chrome FB and login (account1), then I click on ctrl-shift-n and go on FB and login (Account2)
  Here, the question is, is it possible with firefox?

  Use-no.-line switch remote control to open another instance of Firefox with its own profile and to different instances of Firefox running concurrently.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

• Qosmio X 300 - 11W - TouchPad does not work in mode 'sleep'

  TouchPad does not work in mode 'sleep'. I can't wake up my computer using a touchpad. I downloaded and installed a driver for Windows 7 32 bit from a page of the Synaptics driver, but it did not help.

  Can you wake up your Qosmio using the power button / stop?
  You close the lid when the laptop enters the sliding mode?
  After you open the laptop lid should wake up. It work correctly?

• Satellite A300-1HP is not in sleep mode after 30 minutes inactivity

  Satellite A300 1HP is not in sleep mode after 30 minutes inactivity.
  Windows settings are OK (I'm an experienced user).
  He goes to sleep, if I do it manually (by pressing the power button) - but not after inactivity,

  Any idea?

  Norbert.

  Hello, Norbert

  Maybe you should check the settings of Vista power again. I have too many A300 and everything works fine.
  I tested it with all three power plans. Have you done the same?

  Usually, I use the BALANCED power plan and enter mode standby 20 minutes correctly.