VCS and design of Microsoft Interoperability

Similar Questions

• Designer of Microsoft keyboard and mouse

  Thus, all new Mac mini running El Capitan 10.11.2, I am trying to connect via bluetooth, mouse and keyboard from the designer of Microsoft...

  https://www.Microsoft.com/accessories/en-us/products/keyboards/designer-BLUETOOT h-Office/7n9-00001

  The mouse is good to go, but when you try to connect the keyboard, I asks me to enter the digit code 6 on the keyboard to complete the pairing. I tried on the top of the page set of keys, as well as with the right keypad keys, before you press NumLock or after pressing caps lock... NOTHING IS WORKING... I can not connect the keyboard and he finally released pairing mode. The keyboard works fine I have connected via bluetooth to a PC 10 windows and a Surface Pro 2. I know he will have limited functionality on the mac, but I've seen the YouTube comments that people have looked at the keyboard on their mac... I'm a new convert to PC so I'm doing something wrong, or maybe just not compatible with 10.11.2... ?

  Any help would be GREAT!

  Thank you

  Finally, I got mine to pair, but had the same problems as you did for the days. I tried the steps below, and then it paired. In truth, I don't know the exact measurements, but I think this is right, because I can't log to try to pair it again, because it took me a few days to connect this time.

  I have a MacBook Air El Capitan - 10.11.2 running

  But try these steps below. Demarrer start with the keyboard, then hold down the button the keyboard bluetooth and don't let go, then everything continuing to hold it down, then click on the numbers as requested and I think I clicked on enter when I was entering in numbers, then the window numbers disappeared and then returned to the window of bluetooth preferences and then connected immediately. Regardless, the key is to press and hold the Connect button and not let or hold the button for the first by entering the numbers, and then after entering in numbers hold the button down once again, but despite all of this has to do with the key, since the bottom of the keyboard has the possibility to try to connect to the first , and then after clicking on the pair, then it loses its ability to connect to the computer, so you need to hold down and do the steps VERY QUICKLY while the connection process is still active. I hope this helps.

• Cisco VCS and integration Lync2013

  Hello!

  Could you tell me please, when CISCO officially support Lync2013 - free new software for VCS - C and documentation on integration?

  The main interest is the possibility of transferring video between CISCO/MCU and Lync endpoints on the H.264 Protocol, who hails from Lync2013.

  Right now, I've got VCS - C and RTM Lync2013 X7.2. During the video call without AMGW appeal established as audio only.

  When using with Lync2010, it worked on Protocol H.263 and CIF resolution.

  Evgeniy salvation,

  We are currently investigating the possibilities to achieve interoperability between Lync 2013, VCS and video devices on the side of the VCS standards-based, it is a work in progress and at this stage, it is to early to provide any factual information on when interop will be available.

  In contrast to Lync 2010, Lync 2013 does not support H.263 for video and it so that will remove the OCS/Lync integration. I do however think that you should be able to make a two-way video between Lync 2013 and VCS-joined endpoints if you use an AMGW tried that yet?

  Thank you

  Andreas

• What is the difference bewteen MCU, VCS, and SRI (DSP-3)

  Hi all

  We lack CUCM 9.X. I want to integrate Cisco 9971, 8945 with TP Endpoint (EX60 and Tandberg C40). I read this wonderful document (https://supportforums.cisco.com/docs/DOC-30750), but I still have some doubts.

  What is the difference bewteen MCU, VCS, and SRI (DSP-3). For all I know, ISR running DSP3 is the chepaiest option but I don't know if the HD video is supported.

  Thanks regarding

  Remember messages useful rate by clicking on the stars below.
  Favor calificar todos las responses useful dando click in las estrellas mas abajo.
  ___________________________________________
  LinkedIn profile: do.linkedin.com/in/leosalcie

  Hello

  According to the document, you are referring to which I posted previously

  VCS is a call control system call manager but for video end points only, then CUCM is for voice and video, and now it becomes control system of very mature appeal for video communications with native support for video of many recordings of points

  MCU is a material that can be used to host the multi point/party video calls that can be registered to CUCM or VCS according to design

  SRI with DSP/PVDM 3 is the concept of the MCU, but can be used for small multi-point calls and normally remote sites that need local accommodation to a call to reduce the load on the WAN link when most of the participant in the same place for example! and it dose taken support HD but limited features compared to MCU

  for example PVDM3 doe does not support HD when participants are expected to use different video formats

  hope this helps

• I have Windows 7 and the 2007 Microsoft Office Suite Service Pack 1 (SP1) update always fails. Also Microsoft Office Outlook often does not open without having to restart the pc. ___

  I have Windows 7 and the 2007 Microsoft Office Suite Service Pack 1 (SP1) update always fails.  Also Microsoft Office Outlook often does not open without having to restart the pc.

  Hi hound3101,

  Welcome to the Microsoft Answers community.

  a. you are able to install some other updates?
  b. do you receive error messages when you start Microsoft Office Outlook?

  If you have a problem only in the Office Update installation, then I suggest you to report your problem in the Office Discussion groups. If not, try download office update from the link below and install it in clean boot mode.

  Link to the Group Discussion Board: http://www.microsoft.com/office/community/en-us/FlyoutOverview.mspx

  To enter the mode of clean boot of your computer, follow these steps.
  1. click on start, type msconfig in the search box and press ENTER.
   
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
   
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after starting the computer, install the update.

  Hope this information is useful.
  Let me know if it worked.

  Thank you, and in what concerns:
  Umesh P - Microsoft Support
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Always impossible to install updates to security KB2596871 and KB2598041 (2007 Microsoft Office Suites), get error message 0 x 80070658

  I said not able to install security updates KB2596871 and KB2598041 (in Microsoft Office 2007 Suites) for nearly two weeks on my machine, get error message 0 x 80070658.  I saw no solutions to this problem on my machine (running XP Pro x 64), and tried to launch Microsoft Fix It to solve this problem.  What is

  Thanks for any help!

  Walt

  Hi Gekko,

  1 have you made changes to your computer recently?

  2 are you facing this problem with all Windows updates?

  3 have. what Microsoft Fix - it you tried to solve the problem?

  I suggest you to follow the steps and check if it helps.

  Method 1: Perform a clean boot, and then check if it helps.

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure you perform the steps in How to configure Windows to use a Normal startup state from the above link.

  Method 2: Follow the link and run Microsoft Fix - it, and then check if it helps.

  Diagnose and automatically fix common problems with Windows Update

  Method 3: Repair the installation of Microsoft Office 2007 and check if it helps.

  (a) go to Start.

  (b) click on Control Panel and click on Add / Remove Programs.

  (c) select 2007 Microsoft Office and click change.

  (d) click on repair.

  Method 4: Install manually updates, then check if it helps.

  To install updates manually by following the steps mentioned below.

  (a) go to http://www.microsoft.com/download/en/default.aspx

  (b) research updates using the KB number for the update.

  (c) download and install it.

• Uninstall and re install microsoft security essentials

  in the reliability and performance monitor Security Center doesn't monitor the basics of microsoft as my product anti anti-virus security. It is already installed in my computer. now what do I do if I uninstall mse and re install again? would that be good? Please help me on the 'how' to uninstall and re install microsoft security essentials...

  Microsoft Security Essentials questions should be directed to the MSE Forums:

  http://social.answers.Microsoft.com/forums/en-us/msestart/threads

  Installing and upgrading Microsoft Security Essentials program.

  See you soon.

  Mick Murphy - Microsoft partner

• Error: 0x800106ba: is it true and OK that Microsoft Security Essentials disables Windows Defender?

  Is it true and OK that Microsoft Security Essentials turns turn off Windows Defender?

  Yes.

  It's real and OK.

  Read this bit of info:

  If you have Microsoft Security Essentials, AVG, McAfee, Norton, etc. installed, they have a conflict with Windows Defender, or turn it off.

  Microsoft Security Essentials has its own integrated version of the defender and it automatically disables the version of Vista in Windows Defender.

  If it's not:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  Turn Windows Defender on or off the information on the link above of Microsoft.

  Hope the above explains the common compatibility issues with Windows Defender and other security programs.

  See you soon.

  Mick Murphy - Microsoft partner

• I try to install the McGraw Hill software and get an access denied error message. I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  I try to install the McGraw Hill software and get an access denied error message.  I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  Right-click on the setup.exe > run as admin.

  See you soon. Mick Murphy - Microsoft partner

• I want to develop an application Live TV for BlackBerry PlayBook. Please guide where can I find the specifications such as width, height, and icon sizes and design factors etc.

  I want to develop an application Live TV for BlackBerry PlayBook. Please guide where can I find the specifications such as width, height, and icon sizes and design factors etc.

  Guideleines of the user and the specifications on the sizes of icons etc to BlackBerry PlayBook OS Applications

  OK, I downloaed the pdf below for UI guiderlines

  UI_Guidelines_BlackBerry_PlayBook_Tablet_2_1.PDF

  Ok

• Cisco VCS and LDAP for authentication of users

  I have a question about setting up LDAP for authentication of the user on the VCS. I want to have redundancy in my LDAP link. I believe that this is possible by setting a FULL domain name to the address of the LDAP server, then selecting a type of SRV resolution. What I'm not clear on is what the value for the server address would be if I used actually as SRV type of resolution. I should also add that I am looking to use TLS

  To clarify, if my AD domain name is myad.netcraftsmen.net. I have set the field as server address:

  myad.netcraftsmen.NET: assuming that VCS properly interrogate the DNS for the _service._proto correct parameters?

  or would I need to create an SRV record to that effect and set the field server address with the address (including the fields of _service._proto)

  or I need to specify one of the SRV records formats used by MS AD areas (there are several).

  If the latter, then what SRV record for TLS. I don't see records with port 389 (non-secure).

  My intuition tells me that this is probably the first option, but I could be far away.

  Anyway, thanks in advance for any input.

  Kind regards

  Bill

  Hi William,.

  I just checked it on a X6.1 VCS, and it seems that VCS searches SRV _ldap._tcp.domain (where 'domain' has been entered as the server address), both when the encryption is set to 'None' and 'TLS '.

  Hope this helps,

  Andreas

• Windows 7 and Outlook 2007, Microsoft Word won't open

  Windows 7 and Outlook 2007 - Microsoft Word attachments are not open.  Word opens but not the file.  Excel works fine.  Sometimes just Word opens and says not responding do not.  If I erase the data word file in via regedit it solves the problem. Also, whenever I open Word I get the question if I want Word to make changes to my computer.  In addition, I can't open Word files by double-clicking.  I have to open Word first.

  Techie Microsoft asked me to change a setting of compatibility on the winword exe file and it fixed the problem immediately.

• Printer not working, get the error 'Module C:window\system32\spool\drivers\w32x86\3\lxdodatr.dll and dmrclibrary.cpp Microsoft visual C++ runtime '.

  I get following errors: Module C:window\system32\spool\drivers\w32x86\3\lxdodatr.dll and dmrclibrary.cpp Microsoft visual C++ runtime Windows 7

  Please stand out as the answer. What is the number and the model of your printer (Lexmark)? You can try to uninstall and reinstall the printer driver.

• generates keys option for VCS and VCSE cisco

  Hello team,

  How we generate option keys for cisco VCS and example VCSE under keys of the cisco site.

  LIC-VCS-10

  Video server Comm 10 Add Non-traversal network calls

  Thank you

  Renji

  Hi Renji.

  If you have already purchased the license and then click on the following link and re build.

  https://Tools.Cisco.com/swift/LicensingUI/tandbergLicenseLookup

  If it is not purchased then contact your account key to Cisco for new purchase Manager.

  HTH

  Kind regards

  Dharmmesh

• The difference between Photoshop cloud for digital art, photography and Design?

  Hello

  When looking into the purchase of Photoshop on the cloud, I was invited to the question: where your creativity will take you?

  There is then have 3 options: 2 with a price option and a 3rd $ $19.99 9.99.

  -> Design: ""get Photoshop as part of a plan of single-app of creative for just cloud US$ 19.99/mo " "

  -> Photography: "'get Photoshop as part of a plan of single-app of creative for just cloud US$ 9.99/MB" "

  -> Digital art: ""get Photoshop as part of a plan of single-app of creative for just cloud US$ 19.99/mo ' "

  I'm stuck because I want to do all 3!  My question is that if I go with the plan of photography at 50% the cost can I still get the abilities described in digital art and Design services?  For example, the option of digital art says: 'do everything you can imagine. Paint, illustrate, combine images and work with 3D. »

  Thank you so much for clarifying everything you can provide.

  

  Hello

  All this do the same thing, except the 'photography' (including Lightroom) plan is the best deal for the bucks.

  Stone