VCSA 6.0u1 (updated 6.0 VCSA) vSphere Web Client error

Similar Questions

• vSphere Web Client: Error #1034 when you connect.

  Hello

  Hope someone can help me with this one.

  When I try to connect to the vSphere Web Client I get this error (in Flash format) box:

  An internal error occurred - error #1034

  

  This occurs just after a successful authentication

  I have tried different browsers, the Flash upgrade, etc... No luck.

  Any ideas? It used to work fine, but I don't have any idea what has changed.

  Thank you!

  Thanks for the suggestion of julienvarela.

  Apparently, the error was caused by a limited amount of free disk space on drive (C) of the server. After I added more space, the error disappeared.

• vSphere Web Client error - an internal error occurred - error #1009.

  I'm running a questions accessing the page plug-ins of the client in the Web Client vSphere. The error is in the subject line and an extract from the journal of the vsphere_client_virgo is below. Here is the scenario in which I believe is the origin of the problem, I don't know how to fix it.

  I had a third-party web client-plugin registered (Manager Cisco Nexus 1000v). and I disabled it. I then went through the steps to cancel the webclient plugin which was to remove the extension from the extensions through the CROWD handler. I deleted the extension to go from the CROWD and remove the files from the client web plugin on the server vCenter successfully, but now I get the above error. I think I'm getting this because the web client tries to find a reference to the disabled extension, either vCenter Server binaries or the extension, I removed from the CROWD. Whatever it is, I have no idea how to move forward. All ideas are welcome!

  vCenter Version: 5.5 build 1476327

  Caused by: java.lang.NullPointerException: null

  at com.vmware.vise.extensionfw.ExtensionManager.getDisabledPluginPackageInfos(ExtensionManager.java:618)

  at com.vmware.vise.extensionfw.impl.ExtensionServiceImpl.getDisabledPluginPackageInfos(ExtensionServiceImpl.java:110)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)

  at java.lang.reflect.Method.invoke (unknown Source)

  at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:319)

  at org.eclipse.gemini.blueprint.service.importer.support.internal.aop.ServiceInvoker.doInvoke(ServiceInvoker.java:56)

  at org.eclipse.gemini.blueprint.service.importer.support.internal.aop.ServiceInvoker.invoke(ServiceInvoker.java:60)

  at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172)

  at org.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)

  at org.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)

  at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172)

  at org.eclipse.gemini.blueprint.service.importer.support.LocalBundleContextAdvice.invoke(LocalBundleContextAdvice.java:57)

  at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172)

  at org.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)

  at org.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)

  at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172)

  at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:202)

  to com.sun.proxy. $Proxy223.getDisabledPluginPackageInfos (unknown Source)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)

  at java.lang.reflect.Method.invoke (unknown Source)

  at flex.messaging.services.remoting.adapters.JavaAdapter.invoke(JavaAdapter.java:418)

  ... 53 omitted common images

  I ended up doing a reinstall of the vCenter. Once I uninstalled it, I also had to remove everything from \ProgramData\VMware.

• Store data customized for vSphere web client plugin

  Hello

  I'm working on vSphere Web Client plugin development. We need to store custom data on vCenter server that can be configured by the user only once.

  Plugin service will read the data and use it to connect to our server.

  Currently, we create an XML with encrypted data and store it in the folder/usr/local on vCenter.
  What are the best practices for storing these data?

  Thank you
  Vincent

  Small data files can be stored on the same device running the Web Client (VCSA for Linux) or vCenter for Windows

  In order to make your code compatible with the next vSphere 6.0 5.5 plugin you must use the following directories that will retain the write access:

  -/ Import/Storage on Linux

  -System.getenv ("PROGRAMDATA") under Windows.

  Create a subdirectory of the plugin and write your files.  See the code in the samples/global services/Global Services-service/src/main/java/com/vmware/samples/global services/GlobalServiceImpl.java

• Virtual Storage Manager - can't change instant planning time interval with vSphere Web Client

  Hello

  I try to activate Virtual Storage Manager schedules-model for a data store using vSphere Web Client. Everything works fine, but I can't change the time interval of planning of the snapshot. He remains at 12:00 midnight to 12:00 midnight. I can't change it manually or by dragging the bar.

  I tried with IE9, IE11, newer Chrome browsers. And with Flash versions 15 and 13-. Same mistake.

  I've added the URL of Sites you trust with weaker security settings - no help.

  Y at - it a bug or something else I can try?

  I just talked to Dell support on my problem and this is apparently a known issue with local Europe\UK.  The similarity of our problems might be useful - workaround for me was to settle the Locale\Regional from my PC, where I'm doing it in the United States.  Not the time zone or other settings, to control panel, then "Region and language", then on the first tab, 'Format' box should be set to "English (United States).  Close browsers, start again and it worked for me.

  Might be worth a try if you're not already in US format. (mine was in the United Kingdom).

• vSphere WEB client falha ao try access o Serviço SRM

  Estou logando no vSphere Web client e e quando tento access o SRM appears uma falha atenticacao mensagem e os sites are offline. Very ja alterei a senha da conta do Serviço SRM e mesmo assim nao works.

  A conta pra instalar o e a mesma as esta utilizando atualmente SRM used? Caso afirmativo, o fato ter alterado senha pode ter glass o funcionamento do SRM, uma vez that essa senha armazenado fica na base RS, e para atualiza - e rodar o instalador SRM e again Chipre selecionar o option change.

  O bind a seguir mostra em details o principle: VMware KB: change the account to access the server vCenter Site Recovery Manager

• vSphere Web Client, any who do anything like that?

  I create some specific workflows to be presented for use in the vSphere 6 Web Client. In this workflow, I try to understand how to get the user currently logged in vCenter to fill a requested_by input variable.  the reason for this is all this workflow opens either Incident, the amendment or demand in the CMDB and use this value in the query of the CMDB.  Anyone pulling this info in this way?  FYI, I use an account shared for the vSphere vRO plugin

  Thank you

  Steve

  Steve, by 'user currently connected in vCenter' actually means you the user logged in vSphere Web Client, right?

  When you start a workflow from vRO in vSphere Web Client, he'll call vRO REST API who authenticate with a SAML token that is taken in the name of the current user in vSphere Web Client. VRO side, inside the script code of your workflow, you can use Server.getCurrentLdapUser () script method to retrieve the user associated with the workflow runtime. It returns an object of type LdapUser; for which properties are provided by this object, see vRO API Explorer.

• vRealize Orchestrator - cannot add to vSphere Web Client

  Hello

  I configured the device vRealize Orchestrator and added the vCenter Server to the server via the customer to vRO Orchestrator--> library and can successfully run workflows against objects in vCenter. Then vRO works.

  BUT

  The problem I have is that I can't seem to add the server vRO to vSphere Web Client. I do not see the plugin if and when I go to the Orchestrator plugin I see the vCenter Server in the "House of vCO' tab but"N/A"under"Managed by vCenter Orchestrator Server"." Under the "Lists" section it says "vCO servers: 0".» What Miss me?

  I tried to add the new server to vRO (device) by changing the vCenter object and enter the server IP new vRO. But "Test connection" fails every time.

  In addition, vCO has been installed with vCenter initially but never used and not yet used. But I don't think it would make a difference.

  I don't see the vCenter plugin tab in the left menu when connecting to vRO with the customer and com.vmware.vco isn't showing in /mob .

  Versions:

  vCenter: 5.5u2

  vRO: 6.0.3.0 build 3000579

  Thank you!

  Hello

  I'm a bit confused. It seems you are trying to use the two vCO 5.5.2 and vRO with VC 5.5.2 6.0.3, but plug-ins are different (they have different deployment mechanism, different extensions in MOB, etc.). I recommend you stick to the version of the vCO you got installed with VC - in this case, 5.5.2.

  Then, check the following:

  • Check that the vCO is configured with the SSO authentication, and it is the same instance used by VC/Web Client SSO
  • Check that this instance of vCenter is added as properly to vCO and there is an extension of 5.5.x - style into the CROWD. His name is com.vmware.orchestrator. [some-guid]
  • Check that the extension of the server property contains a record with URL property pointing to the server fine vCO - https:[vco-ip]:8281
  • Make sure that the user you are using to connect to the Web Client has a permission; for example. You should be able to connect to vCO Client Java with this user

  If the foregoing is valid, check the Web Client (vsphere_client_virgo.log) log file for any errors of loading of the vCO and connection at the vRO server plugin.

• Keyboard shortcuts for VMware vSphere Web Client

  Hello

  Can someone give me please the shortcuts keyboard of VMware vSphere Web Client?

  Thank you

  John

  Please follow this: http://www.vmwarearena.com/2014/09/keyboard-shortcuts-of-vmware-vsphere-web-client.html

• the closing force of the vSphere web client session after 10 minutes of inactivity.

  To meet the requirements of security, a user admin with a vCenter Server Appliance must

  the closing force of the vSphere web client session after 10 minutes of inactivity.

  That the administrator must do to meet the requirement?

  This much help

  Edit: var/lib/vmware/vsphere-client/webclient.properties, change session.timeout = 10

• vSphere Web Client 5.5 and Google Chrome

  Is Google Chrome completely broken now for the Web Client? Around Thursday or Friday, it stopped loading on my Chrome installation. Works fine on IE, but I feel dirty using this browser. I know that Google support killing NPAPI (or something like that) and there was a work around for now but not yet that works. If I try to load the Web Client I get a failure just after the VMWARE whitens. VMware is working on a fix, I hope is not support vSphere 6 because Dell is not putting an ESXi Iso approved for the VRTX until the 2nd quarter of 2016.

  If you use Chrome 42, you will need enable support NPAPI.

  Chrome 42 breaks the vSphere Web Client integration Plugin

  Chrome 43 will display the beloved "Aw, Snap!" at the launch of the Web Client vSphere integration Plugin. Try to disable the locking of renderer win32k to work around this problem.

  Chrome 43 breaks the vSphere Web Client integration Plugin... Once again

• vSphere Web Client

  We are short of vSphere 5.5 and I went to change the settings of one of our virtual machines and I get the message, "you cannot use the vSphere client to change the settings of the virtual version 10 or higher machines. Use the vSphere web client to change the settings for this virtual machine. He did this on one server and I don't know when it started or how do I install/use the web client of vSphere.

  If you don't want to use the web client, you can always return the virtual machine to version 9 of material or below. This can be done to turn off the virtual machine and by editing the vmx file:

  virtualHW.version = "10".

  Change this line:

  virtualHW.version = "9".

  Then turn on the virtual computer and you will be able to change the settings without the web client.

• Unable to see vCO in vSphere Web Client

  I am currently using vRealize Orchestrator 6.0.0. I tried to add the name extension to my vSphere Web Client, but it still does not work.

  I have configured authentication SSO, the network, imported SINGLE authentication certificate. I ran the two workflows 'Add an instance of vCenter Server' and "Register as a Server extension vCenter Orchestrator vCetner" in "library / vCenter / Configuration.

  When I try to restart my vSphere Web service Client, I can see the vCO in it, but it goes away after a minute. And I can see, the error message.

  Cannot connect to one or more systems of vCenter server:

  https:// " {vCenterIP}: 443/sdk '

  

  It seems that this is not a combination of supported - vRO 6.0.0 (for customers of vRA 6.2 only) + VC 5.5.0. Also in general is not required to run the workflow extension registry. The extension must be registered automatically with the workflow add vCenter server. You could wait for vSphere 6.0.0 6.0.1and vRO and try with them.

  Kind regards

  Galina

• VSphere Web Client cannot connect to the server vCenter Single Sign On.

  I'm running the virtual appliance of the trial 5.5.0.20400 build 2442330 on ESXi 5.5.0, 2068190

  While I try to log on to the Web Client, I get this error.  VSphere Web Client cannot connect to the server vCenter Single Sign On.

  I put fallow the steps to disable SSO by changing the webclient.properties line add file and ad sso.enabled = false .    Then on the vCenter Server Appliance, restart the vSphere client service by typing service vsphere-client restart .

  I enclose the reference files.

  All ideas will be useful

  
  

  This answer was simple, all I had to do was remove the # in front of the statement in the file.   and SSO has been disabled after the restart of the service.

• VSphere Web Client impossible to deploy OVF,

  I want to use WebClient deploy the ovf of POS, but every time, it appears that: customer integration plugin must be installed to activate click on function of ovf the link below to download the insstaller.

  The I click on it and install it, of course I disable the IE protected mode and restart it.

  but next time when I open it, it will prompt me again and again.

  I have try it on firefox. It's the same question.

  My version of IE is: 11.0

  Help, please.

  What version is your vCenter Server? Anyway Internet Explorer 11 has some compatibility issues with the plugin for integration, see the release notes follow-up note:

  • Integration of client plug-ins can not work as expected if you log the vSphere Web Client using Internet Explorer 11 *.
    If you log the Web Client using Internet Explorer 11 vSphere, the following problems may occur when you perform tasks related to the Client plugin integration:
    Solution: use Mozilla Firefox, Google Chrome, or earlier versions of Internet Explorer to access the Web Client vSphere. You can also use vSphere Client instead of vSphere Web Client to work around this problem.
  • • Even if the Client integration plugin is installed, the following message appears when you try to import or to export a model from the FVO:
      Download the plugin Client integration
    • File browser does not download or download a file from the data store.
    • You can't get images of the CD/DVD drive.
    • The console of the virtual machine you may see a black screen with the following error message:
      Remote console is not properly installed