VDP: Impossible to attach the disc

Similar Questions

• Impossible to drop the disc?

  env: 11.2.0.2.3
  
  I have a redundancy normal diskgroup (asm/RDBMS compatibility set to 11.2.0.0) containing two discs, it's everyone in own failgroup.
  I've tested the disk_repair_time attribute and took one of the disks in the group offline and waited until the expiration of the timer - to see if the disc - Oracle and test how I can recover from this situation if the drive was missing.
  
  Then I took the LOG2 drive off line and waited...
  
  ASM alerts log, I see:

  Fri Sep 09 09:59:21 2011
  WARNING: Disk (LOG2) will be dropped in: (168) secs on ASM inst: (1)
  Fri Sep 09 10:00:55 2011
  WARNING: Disk (LOG2) will be dropped in: (74) secs on ASM inst: (1)
  Fri Sep 09 10:02:27 2011
  WARNING: PST-initiated drop of 1 disk(s) in group 3(.467124207))
  SQL> alter diskgroup LOG drop disk LOG2 force /* ASM SERVER */
  NOTE: GroupBlock outside rolling migration privileged region
  NOTE: requesting all-instance membership refresh for group=3
  Fri Sep 09 10:02:29 2011
  GMON updating for reconfiguration, group 3 at 30 for pid 33, osid 13932
  NOTE: group LOG: updated PST location: disk 0000 (PST copy 0)
  NOTE: group 3 PST updated.
  Fri Sep 09 10:02:29 2011
  NOTE: membership refresh pending for group 3/0x1bd7bfef (LOG)
  GMON querying group 3 at 31 for pid 18, osid 10302
  SUCCESS: refreshed membership for 3/0x1bd7bfef (LOG)
  SUCCESS: alter diskgroup LOG drop disk LOG2 force /* ASM SERVER */
  SUCCESS: PST-initiated drop disk in group 3(467124207))
  NOTE: Attempting voting file refresh on diskgroup LOG
  NOTE: starting rebalance of group 3/0x1bd7bfef (LOG) at power 1
  Starting background process ARB0
  Fri Sep 09 10:02:34 2011
  ARB0 started with pid=37, OS id=14883
  NOTE: assigning ARB0 to group 3/0x1bd7bfef (LOG) with 1 parallel I/O
  Fri Sep 09 10:02:40 2011
  NOTE: GroupBlock outside rolling migration privileged region
  NOTE: requesting all-instance membership refresh for group=3
  Fri Sep 09 10:02:40 2011
  NOTE: stopping process ARB0
  SUCCESS: rebalance completed for group 3/0x1bd7bfef (LOG)
  Fri Sep 09 10:02:43 2011
  GMON updating for reconfiguration, group 3 at 32 for pid 38, osid 14888
  NOTE: group LOG: updated PST location: disk 0000 (PST copy 0)
  NOTE: group 3 PST updated.
  WARNING: offline disk number 1 has references (904 AUs)
  NOTE: membership refresh pending for group 3/0x1bd7bfef (LOG)
  GMON querying group 3 at 33 for pid 18, osid 10302
  SUCCESS: refreshed membership for 3/0x1bd7bfef (LOG)
  NOTE: Attempting voting file refresh on diskgroup LOG

  And from RDBMS alerts journal:
  

  Fri Sep 09 10:02:32 2011
  SUCCESS: disk LOG2 (1.2526490858) renamed to _DROPPED_0001_LOG in diskgroup LOG

  OK, check in asm v$ asm_disk:
  

  SYS@+ASM1 SQL>r
    1  select a.name "GroupName", a.state "GroupState",b.name,b.mount_status,b.header_status,b.mode_status,b.state "DiskState",b.repair_timer
    2  from v$asm_diskgroup a,v$asm_disk b
    3  where a.group_number = b.group_number
    4* order by a.name,b.name
  
  GroupName                      GroupState  NAME                           MOUNT_S HEADER_STATU MODE_ST DiskStat REPAIR_TIMER
  ------------------------------ ----------- ------------------------------ ------- ------------ ------- -------- ------------
  DATA                           MOUNTED     DATA1                          CACHED  MEMBER       ONLINE  NORMAL              0
  DATA                           MOUNTED     DATA2                          CACHED  MEMBER       ONLINE  NORMAL              0
  GRID                           MOUNTED     GRID3                          CACHED  MEMBER       ONLINE  NORMAL              0
  GRID                           MOUNTED     GRID4                          CACHED  MEMBER       ONLINE  NORMAL              0
  GRID                           MOUNTED     GRID_0001                      CACHED  MEMBER       ONLINE  NORMAL              0
  LOG                            MOUNTED     LOG1                           CACHED  MEMBER       ONLINE  NORMAL              0
  LOG                            MOUNTED     _DROPPED_0001_LOG              MISSING UNKNOWN      OFFLINE FORCING             0
  
  7 rows selected.
  
  
  SYS@+ASM1 SQL>select * from v$asm_operation;
  
  no rows selected

  So, why the disc always showing to v$ asm_disk if it fell? Or is it? I thought that Oracle should drop the disc at the expiration of the timer of the repair, but then why I always see it? I want to add the failed drive to return once again... How can I realize that, if the drive is still a member of the diskgroup of the NEWSPAPER?
  
  Thank you..
  
  Published by: AJ on 09.sep.2011 01:17

  Hello

  the reason behind this, is that a DISC will get status COWARD, if all valid content could be moved to another drive.
  However, in your case your LOG diskgroup consisted only of 2 discs (and 2 failgroups). So when access to a failgroup had disappeared, the whole failgroup was set to offline.
  Now when the repair timer expires the disks to be abandoned. However, it cannot be moved, because the data on the disk can not be moved to other disks.
  So what happens, is that your discs will be defined in the sense of "FORCING", as soon as the data can be rebalanced to another drive (maybe when you add a new drive), the drive really will be abandoned.

  Concerning
  Sebastian

• 'IMPOSSIBLE READ of THE DISC or FILE SOURCE' - trying to select the last WORD Excel documents to copy into the folder for backup.

  I'm trying to manage files.  My strategy was looking for files with specific dates, then to copy to a new folder with the time interest af and backup.

  1. in the folder my documents C: SEARCH > SELECT ALL

  2 > COPY INTO FOLDER

  3 > MAKE NEW FOLDER

  Can I get an impasse with can NOT READ FILE or DISK SOURCE

  Is there a better way to make a new record with docs for a given period of time?

  I don't know if it is 'better', but another way would be to use Robocopy.

  Robocopy: <> http://technet.microsoft.com/en-us/library/cc733145%28WS.10%29.aspx >

  If you don't have robocopy on your machine, you can get it for free as part of theXP Resource Kit

  An example of command for your application can be:
  Robocopy "c:\documents and Settings\nom" outputdirectory / mining: 30 /maxage:60 / s

  HTH,
  JW

• Impossible to attach the file to the message

  Anyone else having problems fixing MMS messages on the Z5? The menu screen will be located under the keyboard, but when minimize you the keyboard, everything disappears.
  Phone is up to date.

  People with disabilities clean master ok now

• Hello! Impossible to attach the style to the paragraph. Try using 'p' in css...

  Hello!

  Having problems with the text on my page of redaction. I'm trying to make different text styles in the different divs... It does not work when I want to exclude for exactly div. And even I try to redact the whole text by the css for 'p' rule doesn't change anything. Where is the error?

  This is the CSS code in your stylesheet_for_contacts.css (do not use spaces in file names).  It causes problems on the server.

  #wrapper #bodyarea #right {}

  Width: 250px;

  float: right;

  do-size: 14px;

  margin: 0px;

  text-align: justify;

  text-align: left;

  make-style: italic;

  }

  There is none

  tag inside this div. And you have CSS that crushes all other inline styles.  Try to remove the inline styles.

  Nancy O.

• Impossible to disassemble the repair disc

  Hey out there - I hope someone can help me with a solution to my problem!

  My drive external DRIVE (WD MY Passport) decide to stop playing on the same team earlier today.

  My Mac recognizes the drive, but won't let me access to his files directory - when you try to check the diskutil drive tells me it needs to be repaired, and in trying to fix it, diskutil says that it is impossible to disassemble the disc... > _ <

  But when accessing the control through the recovery partition I can also check and repair and it will come just by saying "all is * A - OK... When you use the diskutil through the recovery partition I can even access to its files directory, and it shows me all the files without any problems...

  If it becomes increasingly strange...

  Y at - there someone out there who has an idea of what to do with it?

  Best regards

  Stop your Mac. Now start with the SHIFT key is pressed. This will start in Safe Mode, with all extensions turned off. Safe mode is slow to start, so give it time, it checks a lot of staff. If it works fine in Safe Mode, restart normally. If it works now, you are finished.

  If the problem comes back after a reboot, you have an extension conflict. Disable all extensions via system preferences. To isolate which extension is at fault, turn on an extension at the same time, restart in the meantime, until you find the bad Apple.

• Impossible to uninstall and reinstall word 7 indicates the language does not support my system then if I put the disc reinstall anyway it says error installation and a close button...

  Once again microsft 7 uninstall and reinstall problems Impossible to uninstall to reinstall it says error language does not support my system... then if I try to put the disc reinstall it says error during installation and just one button close... help

  Please repost your question in the section group of Office documents Word to: http://www.microsoft.com/office/community/en-us/default.mspx?dg=microsoft.public.word.docmanagement&lang=en&cr=US where issues of speech specialists will be more than happy to help you with your problem.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Trying to get attached with NIKON D 7000 on iMac with El Capitan.  Worked well last time I tried (pre El Capitan).  It is impossible to find the camera but it recognizes for the download of images.

  Trying to get attached with NIKON D 7000 on iMac and Macbook Pro, both with El Capitan.  Worked fine before as the normal shooting form in my studio (pre El Capitan).  It is impossible to find the camera but it recognizes for the download of images.

  Hi jubei.

  Attach cameras Nikon and Leica using Lightroom CC 2015 and Lightroom (also noticed on other versions of Lightroom) 6 is not currently supported on El Capitan. Please see Lightroom and El Capitan | Mac OS 10.11.

  Kind regards

  Assani

• Impossible to attach/group of users assigned the batteries when there is already attached through OR for PCs batteries

  Hello

  Today, I tried to reduce the connection time by assigning appstacks directly to the computer OR. OR work assignments, but then I'm not able to attach the batteries of the assigned user/group. Also writable volumes are not attached.

  Should it?

  KR

  Cristiano

  To my knowledge, it's or / or. So not and and.

  If you attach an appstack to a machine, you cannot join a user on the same computer.

  Accessible volume in writing is not possible at all. The problem is that accessible volume in writing should always be the first disc which is attached because it is the only read/write disk in the machine. If you attach appstacks to a machine accessible volume writable for the user cannot be the first disc attached more and it will not save the changes.

  I don't think that the use of an accessible volume in writing and appstacks for a machine works. Although the settings will be saved for the machine, not the user. Not 100% sure though about this.

• Can I burn a DVD slideshow created in creation of Windows 7 DVD without finalizing the disc to add slideshows later?

  I use a DVD + R DL disc, and the slide show takes a small fraction of the available space. But the disc is ejected in the final State, and, when later reinserted to add additional slide shows, the disc is not recognized as recordable media.

  I was prior to these links. I'm really interested many slide shows on a large drive, such as DVD + R DL of packaging. I want to play on a Sony DVD player attached to a TV. Also, I want a menu of the watch to appear at startup, which allows the Viewer to choose one to play. Is this possible with DVD Maker? I've seen discussions suggesting that Movie Maker can afford that. However, I can not import files .msdvd and would therefore have to use the .jpg image database and redo all the shows in Movie Maker. Is there an easier way?

  ============================================
  Such a great project it is quite possible that you
  will have problems of system resources.

  As stated earlier... a video DVD must be coded
  in one sitting... impossible to add additional files.

  That said... Create slideshows in Movie Maker and save
  each in a folder on your drive hard in the. Film WMV format.

  Once you have all the. Slideshow WMV... How to import them into
  DVD Maker (there is a limit of 18 scenes). Each individual. WMV
  file must be a scene (chapter) on the DVD.

  Good luck...

  Just a thought more... If you had a DVD player which is Xvid
  compatible... you can convert finished slideshows to the
  . AVI format (encoded in Xvid) and then you could burn a data
  DVD with "LOTS" of video clips. Reason to be... Video DVDs are
  coded according to duration and DVD data are based on the size of the file.

• How the batch of photos of change in Version 2.0 of Photos... impossible to find the function.

  How the batch of photos of change in Version 2.0 of Photos... impossible to find the function.  If it has been deleted to "improve" the Photo experience?

  Lot, what exactly will change?

  Titles, Descriptions and capture date - Yes.

  Select the images you want to change the title or the description and to set-up the info (command-i) pane.  Enter the title or the description in the appropriate field and he will be assigned to all selected pictures.

  

  If you want to batch, change the title with sequential use attached many Applescripts provided by users in the Photos for Mac user tips section.

  Batch change/correction of dates is provided by the Image ➙ setting Date and time menu option:

  

  

• How to attach the TC to an existing wi - fi network?

  Is it possible to attach the TC to an existing wi - fi network? In other words, I have a WiFi network with a router (but of course) and everything works perfectly. I want to just connect Time Capsule to the network and use it for backup. How do I do that? There is no option in the time Capsule "to connect to this access point and is the password". So I consider that it is impossible? Connect a cable ethernet for Mac for backup is not an option that I have several devices, all sharing the same Capsule. Andy help would be appreciated. Thank you.

  OK, I did a hard reset on the Time Capsule by unplugging the power cord, press reset with a pen button and reconnect the power cord and wait 5 seconds until what the orange light flashing. When I used the AirPort to start utility to configure the time Capsule, it gave me an option "Add to an existing network", which I did, and that did the trick. The Capsule is a member of the existing wi - fi network and my MacBook can be seen as a backup device.

• eject the disc from the drive USB Super

  Last night I unboxed my new USB Super drive and attached to my MacBookPro. I put in a DVD of registered film and was able to start playing. Then I ejected it by clicking on the disc icon on the desktop, because I was just testing how it connected etc...  Then, I wanted to see if he could save.

  I inserted a blank DVD and he asked me to tell him what to save, but I didn't save. Instead, he presented another option, which was to IGNORE.

  So I clicked on IGNORE. As a result, there was NO ICON ON THE DESKTOP for this drive. And the text to EJECT in menu bar is grey.

  Now I am sitting here with a new USB Super with a blank CD disk stuck in it and am totally IGNORED, I asked, but what I didn't know when I asked to ignore me.

  That's the problem. I disconnected, signed back in, and he has not yet cleared my instructions to ignore. So I can't eject the blank DVD disc.

  Where should I go from here?

  My MacBookPro is the retina, i7, 15 '' running ElCapitan, a model community 2015, I think.  I'm not on it now, but will open it to follow the suggestions for help. I'm a new converted to Apple, computing, coming from Windows, so I need the regular basic directions. Any help is appreciated.

  Five ways to eject a CD or a stuck DVD from the optical drive

  Ejecting the disc stuck can be done in one of the following ways:

  1 restart the computer and after the buzzer, press on and press and hold the

  left button of the mouse until the disc ejects.

  2. press on the button of your keyboard.

  3. click on the button in the menu bar.

  4. press COMMAND-e.

  5. If none of the above works try this: open the Terminal application in

  your Utilities folder. At the prompt enter or paste the following text:

  / usr/bin/drutil eject of

  If this fails, then try this:

  Start the computer in single-user Mode. At the prompt, enter the same command as used above. To restart the computer enter 'reboot' at the prompt without the quotes.

• How can I check the disc for physical integrity on Satellite P305?

  I have P305-S8838.

  I had some freezing problems earlier this month, and on the notice here, I nu start-up and reduced services a little at a time.
  Now, I have a few more crash but don't know if it's a physical disk problem.

  For example... I have run CHKDSK and does many things and happens at the exact same spot and hangs at step 4 file 5 3498 or 421168 processed.

  I tried to run CHKDSK in SafeMode but tells me drive is locked and it will run when I restart. But the restart put back me in normal mode and get the same hang.

  Now, for more suspicion of a physical problem. I tried to make a disk image with ACronis and same problem occurs because he says impossible to reading data 226 964, 072 sector and ask if I want to ignore and continue. I say yes to everything. Log shows he made about three of these attempts and crashes.

  I ran sfc/scannow and it says found problems that he was unable to fix. The newspaper isn't so long and complex course that all means. I could send these log files if someone can help me understand.

  I ran the test of memory OK.

  I if I could put in DVD Toshiba and certain diagnoses, but when I put in the disk I get this big warning I'll crush, etc and I have chicken.

  This didn't stop me to use the computer, but its all irritating.

  How can I check the disc for physical integrity?

  Bob

  Hello

  He idea goo to check the HARD disk and run some diagnostic procedures.
  For this, I recommend the freeware tool called Drive Fitness Test.
  It allows you to check the HARD disk for certain physical defects.

  Google for this tool. You can get it from multiple pages download

• Satellite U400-112: impossible to format the local drive (damaged MFT?)

  Hello!

  I had a pretty serious problem with my HARD drive.
  250 GB HARD drive
  C: 116 GB - NTFS - Windows XP (Vista initially)
  D: 1, 5 GB - NTFS - (Vista Recover?..)
  E: 117 GB - RAW (was NTFS prior to crash)

  Local drive E: MFT have been damaged because of the virus attack (I hope not because of my madness!). It's NTFS, now it's RAW. I got all the necessary data partition with program ZAR, but all my attempts to recover or just the format E: remained unsuccessful.
  None of the defective sectors found on the HARD drive. Standard Windows tool to format the disks fails: 'it's impossible to finish the formatting of E:

  Before this problem with the E: drive, I had several problems with HARD drive. I have never divided re discs, to Partition Magic from the beginning he identified incorrectly. I tried Partition Magic 7 and 8.
  Link: [error screensaver | http://cs1498.vkontakte.ru/u169802/154397/x_3a82b4fb.jpg]

  The problem is that the special programs (I tried "find and Mount") also could not identify partitions to correct the defective MFT. I thought that low-level format can help me, but I heard, that the use of all applications for other producers can probably destroy my HARD drive. Are there only special applications of Toshiba developed for such cases? Or you can advice me something else?

  Thanks for your help!

  P.S. These applications did not help me:
  Find and Mount (can't find the HARD drive)
  Acronis Recovery Expert (does not find the HARD drive)
  OnTrack EasyRecovery Professional (does not resolve the error, but help to recovery data)
  HDD Regenerator

  Thus you get back all your important data?

  I would like to just launch Recovery to restore the HARD drive to its factory condition. If the recovery fails, you can try to delete the partitions with FDISK from a startup MS-DOS disk. Free bootdisks can be found at www.bootdisk.com

  FDISK can also repair a Master Boot Record by running this command: FDISK/MBR
  But it is not 100% reliable, it could cause more harm than good.