VDP (vCenter Data Protection) flow and data management.
(1) is there any limit on the maximum FC and Ethernet through - was supported by the advanced version of POS?
(2) maximum size of data capacity of 8 TB of VIENNA is combined of all 10 PDV (maximum supported by vCenter) devices, or for a single device?
(3) if 8TB limit is for a single POS device, so is it possible to manage 80 TB (with 10 devices POS) per vCenter server.
Thank you
Sanjeev
Is it mentioned in VMWare document that TB 80 and 80 simultaneous backup of VMs is the limit by vCenter?
Thank you
Sanjeev Shrivastava
Tags: VMware
Similar Questions
-
vCenter Server 4.0 and Update Manager
Hello
Can vCenter Server 4.0 and Update Manager be installed on the same server?
I understand that they both must separate databeses.
Thank you
Euan
Is the same as VI 3.5.
You need two DB, but also on the same SQL instance.
So you can install on the same computer.
See also pages 10 and 11:
http://www.VMware.com/PDF/vSphere4/R40/vsp_compatibility_matrix.PDF
André
-
vCenter Server Virtual Appliance and Update Manager
Hello
Anyone with experience in the present? Documentation says that it is not possible to install the update on a VCSA Manager but you can install the update on a Windows Machine Manager and point it at the VCSA.
Anyone try? It works as recommended by VMware?
Thanks in advance!
elgreco81
As petkom says...
That works, let some customers like that, no problem.
-
List of ESXi host and data managing paths
can someone help me with a script to list the ESXi host name, then their data management of path for each data store that they are connected to?
Thank you
MikeP
Sorry, I thought you ment the other script.
Try it like this
Write-Host "Connecting to vCenter" $VCent = "10.2.160.250" Connect-VIServer $VCent -user user -password passwd $VMHosts = Get-VMHost | Sort-Object Name Disconnect-VIServer -Server $VCent -Confirm:$False $report = @() ForEach ($VMHost in $VMHosts) { $HostName = $VMHost.Name Connect-VIServer $HostName -User root -password passwd $esxcli = Get-EsxCli -VMHost $HostName $esxcli.corestorage.device.list() | where {$_.IsLocal -eq "false" -and $_.DeviceType -eq "Direct-Access" -and $_.MultipathPlugin -eq "NMP"} | %{ $report += ($_ | Select @{N="Host";E={$hostName}},Device, MultipathPlugin) } Disconnect-VIServer -Server $HostName -Confirm:$False} $report | Export-Csv "C:\report.csv" -NoTypeInformation -UseCulture
You can try to change the Where clause to see all the plugins multipath.
where {$_.IsLocal -eq "false" -and $_.DeviceType -eq "Direct-Access"} | %{
-
ADF task flows and parameters WITHOUT data controls
Hello world.
In a previous post, I asked him about the best way to call the workflow "at a distance" by a "local" application Frank Nimphius suggested me to use the JAR ADF libraries between projects for this. I'll apply, but I have a small/big problem:
As I said in my previous post, I exclusively use the EJB 3.0 - JPA technology in all my projects. The components business or data controls are used. Just a lot of Java-based components.
Now, supossed that I have a (based in the HR schema) application with 3 projects:
-L' one with all things EJB: entities from tables, session bean, and an example of a Java client.
-The second as a 'local' point of view, with a JSPX (viewLocations.jspx) page that contains the table of communities (table_locations).
-The third view "at a distance", with a JSPX too (viewCountries.jspx) page that contains the table of countries (table_countries).
I have a button in views the remote, and one to switch from local to remote display and the other for the opposite.
The goal is: pass a location of choice of table of locations for the project where I need to see the country for the selected location.
In the table of locations, I use a variable currentLocation (declared as: private location currentLocation = new Locations() ;) to store the selected location and a SelectionListener process, called selectLocation_listener() with this code in the)
backing.viewLocations.ViewLocations.java:
+ ' public void selectLocation_listener (SelectionEvent selectionEvent) {+
+ / / Add code from the event here... +.
currentLocation = (rentals) table_locations.getSelectedRowData ();
+}+
If the selected location is stored in the variable currentLocation.
Both in projects the and remote, in that I store the task flow JSPX pages. I have the taskLocal.xml as an unlimited workflow with the viewLocations.jspx as the main view and the taskRemote.xml as a workflow bounded with the viewCountries.jspx as the main view.
I have deployed the project remotely in a library JAR ADF and imported to the local project, then I get it as a special activity Flow call.
The question is: How can I pass the variable currentLocation as a workflow setting to my project remotely? I don't have any data control to bind to a workflow parameter.
Should I really have some control of data to store my currentLocation variable and bind it to a parameter? Or there is another way without data controls?
Another fact: local and remote project have a dependency with the EJB project.
What about dependencies? Have a role in call task workflow activities?
Thanks in advance.
If you would like more information or a more detailed explanation please ask me.Hello
a data control is needed for this. If you only want to use ADF task Flow and manage the component UI lie yourself, then you are good to go with this approach. To add parameters to a call from bounded task flows, have a look here
http://download.Oracle.com/docs/CD/E15523_01/Web.1111/b31974/TOC.htm (Chapter 15, activities of view URL using 15.3)
You can make the local variable that is accessible from an accessor method Set/getter bean managed so that you can use EL when you set the value of the parameter.
Frank
-
Purge the concurrent request and/or Manager Data - take long &; end with error completed
Purge the concurrent request and/or Manager Data - take long & end with error completed.
What ever the age values 30,70,1000
****
Select count (*) in the FND_CONCURRENT_PROCESSES;
COUNT (*)
-----
32149
****
Select count (*) from the FND_CONCURRENT_REQUESTS;
COUNT (*)
-----
585499
****
Request of min | Application of Max date | Date
-------------------- --------------------
SEPT. 13.-10 10 OCTOBER 13
My problem is now solved
the cause of the problem was:
After the clone for the new Production Server FND_CONCURRENT_PROCESSES & FND_CONCURRENT_REQUESTS table 'old' lines were still talking to the node that is no longer available in the new production to LOGFILE_NAME and OUTFILE_NAME columns.
And after the removal of these lines, executes the request was very quick and works as it should work now.
Thanks for all the help I get here and with the SR team too
-
Hello
I was wondering what should Foglight for Enterprise Virtualization v. 7.0 and Storage Manager 3.0 available for download
Thank you
Eli
Foglight for virtualization 7.0 is now available on Supportlink here. Storage Management 3.0 is available here.
-
VCloud Director displays do not Vcenter data.
Hi guys,.
I installed VCD 5.5, vsheild Manager and vcenter on a single ESXi 5.5 . I am facing problems with VCloud Director.Although I have attached the Vcenter Sucessfully in VCD, vcenter data not poping upward into Vcd. So the list of hosts is empty. No resouce pool are coming in Vcd.
Here are my questions coming in my mind... I think I might get hurt
1 then I installed VCD 5.5, vsheild Manager and vcenter on a single ESXi 5.5 host?
2. is it a problem with the license... Although all of them are allowed until 2015. ?
3. do I need to manually install the agent Vcd on ESXi... Although I think that this should be done automatically? If yes how to do this.
Please tell me where I can be wrong.
I have attached snapshots of Vcenter and VCD. Please review those and help out me
All responses will be appreciated.
Thank you
Tarun Gupta
You must create a provider vDC for nothing appear. This requires some DRS to be on (if you don't have it already done) and requires usually two hosts in a cluster. This is because you need to spend in maintenance mode to install the agent correctly and can vmotion powerd on the VMS of a host while the other prepares. It's all part of the installation and Administrator's guide.
-
Need a script to a fast line to disable SIOC on all storages attached to a vCenter data
Need a script to a fast line to disable SIOC on all storages attached to a vCenter data
Hello, vmwaredownload-
If you just want quick and dirty and know that all your data warehouses are able IGCS, you can use these few lines (you can join to the same line, separated by semicolons, if you really need a single line):
$viewStorageRM = Get-View -Id "StorageResourceManager-StorageResourceManager" ## get the Storag Resource Manager view$spec = New-Object VMware.Vim.StorageIORMConfigSpec -Property @{"Enabled" = $false} ## create the config specGet-Datastore | %{$viewStorageRM.ConfigureDatastoreIORM_Task($_.Id, $spec)} ## for all datastores, disable SIOC
Which does not check if the data store is capable of IGCS, or if it is already off - he just goes and tries to disable SIOC on all data warehouses.
To learn more, if you're interested, AC talked about allowing people with disabilities/IGCS in his vNugglets.com post earlier.
How these three lines do for you?
-
Unable to activate plugin vCenter data recovery
I installed the plugin for vCenter Data Recovery and I went into the Pugins manage and it is listed as disabled. If I right click it nd select activate, nothing happens. No error, but it does not either. Someone at - there experience this problem?
-Daniel
chiazynloo,
Build numbers seem to be off - unlike the version numbers correct for Beta 2 or RC build recovery of data and vCenter Server 4.0 RC respectively. Where did you got these bits?
-
No more Appleworks in Yosemite. What software do I need to do the simple drawing, spreadsheets, data management?
Yes, it's old enough ;-)
For drawing, how about something like Acorn (on the Mac App Store)? For calculation and processing sheets, there are numbers and Pages available at Apple, the Mac App store.
-
He NEITHER has a recommendation for an effective system of data management product compatible with multisim and ultiboard files?
I'm not sure of a third-party tool, but you can do this by using projects in Multisim. Go to file > project and packaging > new project. You can add all required files related to a single project and then save all together. You can also configure version control and keep track of all the changes. This is a really easy way to archive your files because it records everything in a folder compressed zip with the special extension understood by Multisim.
I hope this helps.
-
Objects monitored by reflecting in data management
Hi all
Need your quick help on this issue.
We uninstalled fglam from one of our monitored hosts and we see not this host under the hosts of the agent, but when we try to remove items permanently from the management of data, its reflection back even after removing objects.
Could someone help me on this issue as soon as POSSIBLE.
-Shiva
Hello
We don't automatically delete data because in some cases people always want to see that the old data.
If you want to remove it, she must be removed from the dashboard after Managment Server > servers > data management
https://support.quest.com/SolutionDetail.aspx?ID=SOL69418&PR=Foglight
You can remove the host from the host model and you can remove the agent manager model Manager agent
Please note that if there is something that is still the existence of this object, it will pop up again once
Hope this helps
Golan
-
Problem: Data Manager has stopped working
"data manager has stopped working" it's the pop-up window that appears everytime I open my laptop. I always click on the solution on the net but nothing happens. How to stop or fix this problem. I use windows7.
Hello
1. What is the number of brand and model of the computer?
2 have you made any changes to the computer before the show?
3. have you installed Data Manager?
Follow the mentioned methods:
Method 1:
Step 1: Check in safe mode
You can also check if the problem persists in safe mode.
Reference:
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
If you are able to see the start icon, then executes the method 2.
Step 2: Perform a clean boot and check.
To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.Method 2: Uninstall and reinstall data manager if it is installed and check
Uninstall or change a program:
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-programI hope that the above information is useful!
-
11.1.2.4 FDMEE: "data management" not visible from the EMP workspace
Hi guys,.
I installed and configured EMP 11.1.2.4 on 64-bit windows computer, I can see all the components work perfectly await FDMEE.
After I have connection in the workspace navigate-> administrator, I do not see "data management."
Tried to access http://localhost:6550/aif/faces/setup/Main.jspx but the error like "you are not authorized to access this page '. " "
Can you please suggest how to solve this problem?
Thank you
Sri.
OK, all components are installed on the same box?
Can you rerun the configuration of the web server & web server bounce him alone and give it a try.
Kind regards
Deker P.
Maybe you are looking for
-
macOS Sierra presents a serious problem that must be dealt with quickly
Hello A couple of days, I installed Mac OS Sierra on my MacBook Air (bought in 2012). Since I installed the new OS, my MacBook is not stop appropriately such that she used with all earlier versions. Shortly after I chose the stop, the screen goes gra
-
I tried to get rid of the annoying pop up on You Tube and in frustration, I chose the refusal full screen and "remember" and now cannot get full screen anywhere or change it back. How do I do that? I read the thread here with the same problem and the
-
Hi, I recently bought an apple ipod touch 6th generation, but the battery seems to be not as advertised. I can't get 9 hours of music at a medium volume, 4 hours of video with youtube and internet radio is 1 to 2 hours at best. My ipod is defective o
-
Satellite 5100 503: HDD upgrade question
Hello I want to upguard the HD beats the new toshiba HD fails in my book. bat in another PC, it works perfectly. If I turn the original HD on a PC it doesen't work, but it works in the laptop can enyone helb me? I think that the original HD have a di
-
I can connect to the WLan, but cannot access the internet on Tecra A8
There is no problem when I use the LAN port.When I use the WiFi (wifi adapter Tecra A8), I can connect to the network, but the status is local, I can't access the internet. I've updated my access point with the latest firmware (D-link DWL-2000AP +).I