vCenter Server 4.0 and Update Manager

Similar Questions

• vCenter Server Virtual Appliance and Update Manager

  Hello

  Anyone with experience in the present? Documentation says that it is not possible to install the update on a VCSA Manager but you can install the update on a Windows Machine Manager and point it at the VCSA.

  Anyone try? It works as recommended by VMware?

  Thanks in advance!

  elgreco81

  As petkom says...

  That works, let some customers like that, no problem.

• 5 and update manager vCenter

  Hello

  I installed vcenter and update manager as a virtual machine host.

  Now when I want to use the update patch of the host Manager, it takes all the vm to stop.

  Obviosly if I stop the VM guests, this includes the vm vcenter himself who then stops updates.

  I tried to connect directly to the host without vcenter but then there is no Update Manager.

  Any way around this?

  Thank you

  Chris

  I would start by setting up the vmware in your main site environment - Essentials you are able to use the vmotion and HA - vmotion you will deal with the current issue - would you be able to vmotion virtual machines on a host and update without havomg yp sjut down virtual machines. With HA you will be covered in the event of hardware failure - if an ESXi host to crash the system VMs automatiically will restart on the remaining hosts.

  Bit please be aware vmotion and HA require shared storage - either SAN (iSCSI and storage FC0 or NAS/NFS -

• While add ESXi 6 existing hosts, vcenter server 5 std and esxi host 6 cann't add to AD

  Hello

  Greetings. !

  We have seen vCloude 5 Enterprise edition and vCenter Server Standard 5.5

  at the moment all my existing hosts ESXi 5.1 are managing through vCenter Server Standard 5, now recently we buy vCloude 6 Enterprise edition

  (1) I found the following problems all add ESXi 6 hosts (VMware ESXi - 6.0.0 - Update1-3380124- HPE) to AD sales thru of sphere, it is read error.

  

  I have already set up network, DNS, make sure firewall ports, Ping - are all OK.

  (2) Moreover, while trying to create new CD, add the cluster, then add hosts, is giving following error.

  

  I can add new Hosts 06 ESXi Existing vCenter Server 5.5 Standard or I have to buy updated additional license for vcenter server 5 std vcenter 6 standard / enterprise.

  Thanks in advance.

  ESXi 6 cannot be managed by vCenter 5.5 or earlier.

  He needs a same version or higher of vCenter server.

• VCenter Server Appliance 5.5 update w/o VUM

  I'm Manager my first vmware environment. We are a small company and using the Essentials package. I have two hosts upward with a vCenter Server Appliance 5.5 Build 2063318. I'm looking for a way to update the device for security patches. I have not been able to find how to do that when we don't have a Manager Update server configuration. I downloaded the .iso file but have not been able to find all the commands that will allow me to manually install the package. Any help is greatly appreciated.

  Note that you must connect vCenter Server Appliance Web Console (VAMI) address: https://vCenterServerIPAddress:5480/ NOT the vSphere Web Client that listens on a different port.

• vCenter - status hang long + Vmware Update Manager does not properly

  Hello

  I had the problem of the tqo on a new VC and ESX Server. (esx 3.5U4 and VC 2.5 U4)

  -Update Manager started successfully, but crashes at 'In progress' for more than two hours! (Vmware Update Manager Update download), it was initiated by com.vmware.vcintegrity

  -J' I right click on the task and then cancel now, I had two process hangs for several hours.

  How can I get rid of them and why this has happened?

  Thank you

  PS: How can I open SR with VMware?

  try restarting your vCenter Server Service.

  .. .but do not forget if you download updates on VMware website to complete your update repository, this can take some time.

  To open an SR, go to

  http://support.VMware.com/selfsupport/

• VDP (vCenter Data Protection) flow and data management.

  (1) is there any limit on the maximum FC and Ethernet through - was supported by the advanced version of POS?

  (2) maximum size of data capacity of 8 TB of VIENNA is combined of all 10 PDV (maximum supported by vCenter) devices, or for a single device?

  (3) if 8TB limit is for a single POS device, so is it possible to manage 80 TB (with 10 devices POS) per vCenter server.

  Thank you

  Sanjeev

  Is it mentioned in VMWare document that TB 80 and 80 simultaneous backup of VMs is the limit by vCenter?

  Thank you

  Sanjeev Shrivastava

• vCenter server is down and esxi server db server hosting is due

  Hello vmware experts,

  I hope that you will be able to help me with this problem. Suddenly our vcenter server fails. I discovered that the vcenter Server database server is down. When I look back, the esxi itself host is having a problem.

  I already rebooted the esxi. I tried to connect to this host again via vsphere client and at first, he says that it takes too much time to respond (this is the reason for the way I know that the host has a problem) then I restarted the console management officer. This time I was able to connect to the client via vsphere esxi host. Unfortunately, all virtual machines are showing unknown.

  assuming that you have shared stored, you can always make a note of what the VCDB VM runs on (even if the guests are unkknow).  To connect to a different host, browse the shared data store and find the VCDB VM, there right click on the .vmx file and add to the inventory.  Then turn the VCDB VM.  You can do the same if your vCenter host is a virtual computer.  Once you get the two VM added to the inventory and power, you will find that things are a little easier to troubleshoot.

• Yellow triangle in vCenter Server after the complete update 4.1 2

  After the upgrade of my host ESXi 4.1 with full update 2 (via the Update Manager), I see a yellow warning by this host triangle in vCenter. Has tried to look in the logs and events, but found nothing suspicious.

  Thanks for any help.

  HM

  Take a look at the contents tab of the host with the yellow triangle.  Configuration problems is displayed at the top.

  It could be that syslog is not configured.  Update 2 checks for that while the previous version are not.

  If this is the case you can simply assign the syslog by default for ESXi location, go to the Configuration tab, under the software, select Advanced settings, down to syslog, the syslog.local.datastorepath enter [] / scratch/log/messages as shown below.

  

• license and Update Manager

  All, I have 2 questions

  (1) I have a host esx 3.5 in a vCenter. I used the LM Manager for the license for this 3.5. Is - the truth is that I will not see licensing in vCenter EPG Manager? Otherwise, what I do to see the 3.5 license in vCenter

  (2) my attempt to use inside of vCenter Update Manager updated the 3.5-4.0 has failed several times. Is there any file temp temporary on the server vCenter or ESX 3.5 host that I need to remove before trying to use the Update Manager again? The reason why it fails? the error message, it is my place of storage may be full, or the patch is already there

  Thank you

  Take a look at the license for vCenter Server 4.0 Server Configuration. Connect section vCenter Server 4.0 to a license server explains how to connect to your LM License Manager (I assume that you installed on your virtual Center 2.5 server).

  André

• vCenter Server 5.5 and Oracle 10g DB

  Anyone know if any problem of operation of vCenter Server 5.5 on a DB Oracle 10 g?

  The support matrix shows no support, however, I find that there is also no support for Oracle 12 c matrix, but I find that the vCenter Server 5.5 Update 2 Release Notes indicates that it supports Oracle 12 c.

  There is a problem of execution of vCenter Server 5.5 on an Oralce DB 10 g?  Thank you.

  The support matrix shows no support, however, I find that there is also no support for Oracle 12 c matrix, but I find that the vCenter Server 5.5 Update 2 Release Notes indicates that it supports Oracle 12 c.

  The database support matrix VMware shows in fact that Oracle 12 c is supported for the database of U2 vCenter 5.5:

  VMware product interoperability matrices

  

  10g, however, is not supported. It can work if you follow the same instructions (see the documentation for vCenter 5.0 where it has supported), but it is not supported by VMware.

• ESXi 5.1 and Update Manager

  Hi all

  As I'm sure many of you are well aware, ESXi 5.1 is the latest version with a .NET VI Client is a separate installation. In the future, we want to use the Web Interface to manage ESXi hosts.

  My question is with the Update Manager. Anyone know if you can use the Update Manager in the web interface? I see where use in the VI Client.

  If you know the discussions or documents on how to use it in the web interface, please report it. Or if you know any information on the ability (or for that matter, cannot) use it in the web interface, I'd love to hear it.

  -Ed

  Hello Ed,

  Yes, I work in VMware. In future releases it will not .net / c# and only web client. In this release VMware wanted users to use vSphere client and the web client, users can become comfortable with the web Client.

  I am sure that in future versions, the MU plugin will be integrated.

  Hope that answers your questions.

• VCSA and update Manager

  Update Manager updates the vCSA device?   I swore that I read that he cannot for the time being, but I don't remember the documentation nor do I find.  If anyone knows, please let me know or point me to the documentation saying it is or is not possible.

  I know VUM does not come with the vCSA and I also know that it is always necessary to use Windows to run stand-alone.  You don't know everything just not if the autonomous will update the device.

  THX.

  Hi Larry,

  Good question. As far as I know, the update/upgrade of the VCSA is build-in the camera and you need to update/upgrade from there. Check that this upgrade procedure document.

  Kind regards.

• Snapshot and update Manager

  HI guys

  I'm new to the VM world, and slowly picking up his songs, I want to understand the Update Manager and snapshot in VMware infrastructure.

  Could someone provide me with the link to load a few good documents relating to the object above and it would be wonderful if there is no CBT/video?

  Thank you

  to VMware Update manager, please see the following document:

  http://www.VMware.com/PDF/vi3_vum_10u2_admin_guide.PDF

• HTTP server with authentication and session management

  Hello!
  
  I'm looking for an implementation of HTTP server as [Server HTTP JavaSE6 | http://download.oracle.com/javase/6/docs/jre/api/net/httpserver/spec/index.html] or NanoHTTPD, but with simple authentication per session and session management.
  
  Google was not really useful here, cause most links are on JSP/Servlet, but I need a full Java Server code. Is there already something out there that could match my needs? When not, can someone give me a useful link to the coding session management?
  
  Welcome, itschoma

  Focus on the pier. It is integrable if I remember correctly.