Verclsid.exe taking 30 seconds to complete

Similar Questions

• I have a subscription to adobe for the cc 5.5 and rebuilt my computer to the low load the .exe and the second file. I have windows and after clicking on the .exe has nothing happened?

  I have a subscription to adobe for the cc 5.5 and rebuilt my computer to the low load the .exe and the second file. I have windows and after clicking on the .exe has nothing happened?

  If you have downloaded from here: Download CS5.5 products, please see the instructions to extract the files and install your product.

  Alternatively, you can download it here:

  http://prodesigntools.com/Adobe-CS5-5-direct-download-links.html

  Guinot

• DLLHOST.exe taking up all the RAM random instance.

  I have Windows 7 Ultimate and 4 GB of RAM on a Dell Inspiron 530 computer. A few minutes ago I was watching YouTube and I clicked on the Start button, because I wanted to do something. The computer then nuts. The flashed repeatedly start button then has frozen, Firefox froze and the screen went black and white for a few seconds. I opened the Task Manager and kill everything, but it was still extremely slow. CPU and memory were at an all time high, (I think 60 CPU, Mem was about 100). I then checked the show all option process and discovered that DLLHOST.exe was using 4 000 000 KB of memory. What the heck is DLLHOST.exe, why should I use as much memory, and is it essential? Can I get rid of him? Why it opens so randomly?

  Hello

  You could also deal with this issue because of any third-party application. I suggest you to start your computer in a clean boot state, and check if it helps.

  Clean boot: To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: Please refer to the section: how to reset the computer to start normally after a boot minimum troubleshooting section of Kb to start the computer in normal startup after having solved the problem.

  I suggest you to start the online virus scan. Follow the steps in the link below.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Let us know the status of the issue. We would be happy to help you.

• Fusion that used to run quickly, taking too long to complete

  Dear Experts,

  I have two tables-

  CREATE THE TABLE XXVDB. XXVDB_TMST_WEEKLY_T

  (

  EMPLOYEE_NUMBER NUMBER (10),

  NUMBER OF BASE_HOURS

  NUMBER OF BILLABLE_HOURS

  NON_BILLABLE_HOURS NUMBER DEFAULT 0,

  VBU VARCHAR2 (50 BYTE),

  VBU_MANAGER VARCHAR2 (50 BYTE),

  SDF_HOURS NUMBER DEFAULT 0,

  QIP_HOURS NUMBER DEFAULT 0,

  PIP_HOURS NUMBER DEFAULT 0,

  TED_HOURS NUMBER DEFAULT 0,

  SVP_GA_HOURS NUMBER DEFAULT 0,

  QBP_HOURS NUMBER DEFAULT 0,

  VACATION_HOURS NUMBER DEFAULT 0,

  LUNCH_TIME NUMBER DEFAULT 0,

  WEEK_NUMBER VARCHAR2 (50 BYTE),

  DATE OF WEEK_ENDING_DATE,

  DATE OF YEAR_START_DATE,

  VARCHAR2 (50 BYTE) SUPERVISOR,

  DL_OR_IL VARCHAR2 (10 BYTE),

  BUSINESS_GROUP VARCHAR2 (50 BYTE),

  ORG_ENTITY VARCHAR2 (150 BYTE),

  NUMBER OF GD_ID

  GD_NAME VARCHAR2 (150 BYTE),

  GD_MGR VARCHAR2 (150 BYTE),

  NUMBER OF GD_MGR_NO

  NUMBER OF SDU_ID

  SDU_NAME VARCHAR2 (150 BYTE),

  SDU_MGR VARCHAR2 (150 BYTE),

  NUMBER OF SDU_MGR_NO

  NUMBER OF OBU_ID

  OBU_NAME VARCHAR2 (150 BYTE),

  OBU_MANAGER VARCHAR2 (50 BYTE),

  OBU_MGR_NO NUMBER (10),

  NUMBER OF COE_ID

  COE_NAME VARCHAR2 (150 BYTE),

  COE_MANAGER VARCHAR2 (50 BYTE),

  COE_MGR_NO NUMBER (10),

  NUMBER OF CENTER_ID

  CENTER_NAME VARCHAR2 (150 BYTE),

  CENTER_MANAGER VARCHAR2 (50 BYTE),

  CNTR_MGR_NO NUMBER (10),

  NUMBER OF PROGRAM_ID

  PROGRAM NAME VARCHAR2 (150 BYTE),

  PROGRAM_MANAGER VARCHAR2 (50 BYTE),

  PRGM_MGR_NO NUMBER (10),

  CLASSIFICATION VARCHAR2 (50 BYTE),

  DESIGNATION VARCHAR2 (100 BYTE),

  BAND VARCHAR2 (50 BYTE),

  MODE_OF_DELIVERY VARCHAR2 (50 BYTE),

  BASE_LOCATION VARCHAR2 (100 BYTE),

  WORK_LOCATION VARCHAR2 (100 BYTE),

  NORMAL_HOURS VARCHAR2 (50 BYTE),

  VARCHAR2 (100 BYTE) SERVICE,

  SERVICE_DETAILS VARCHAR2 (250 BYTE),

  DOMAIN VARCHAR2 (50 BYTE),

  VARCHAR2 (50 BYTE) VERTICAL,

  IS_BENCH VARCHAR2 (50 BYTE),

  PRIMARY_SOFTWARE VARCHAR2 (50 BYTE),

  SECONDARY_SOFWARE VARCHAR2 (50 BYTE),

  EMPLOYEE_SALARY_CLASS VARCHAR2 (50 BYTE),

  EMPLOYEE_DELIVERY_UNIT VARCHAR2 (50 BYTE),

  EMPLOYEE_DEV_UNIT_NAME VARCHAR2 (150 BYTE),

  NUMBER OF EMP_LEGAL_ENTITY

  EMPLOYEE_LEG_ENTITY_NAME VARCHAR2 (150 BYTE),

  CREATION_DATE DATE,

  NUMBER OF CREATED_BY,

  DATE OF LAST_UPDATED_DATE,

  NUMBER OF LAST_UPDATED_BY

  LAST_UPDATED_LOGIN VARCHAR2 (30 BYTE),

  DATE OF RESIGNATION_DATE,

  DATE OF JOINING_DATE,

  CURRENT_EMPLOYEE_TYPE VARCHAR2 (50 BYTE),

  OBU_MGR_EMAIL VARCHAR2 (50 BYTE),

  CENTER_MGR_EMAIL VARCHAR2 (50 BYTE),

  PROGRAM_MGR_EMAIL VARCHAR2 (50 BYTE),

  EMPLOYEE_NAME VARCHAR2 (100 BYTE),

  EMPLOYEE_EMAIL VARCHAR2 (150 BYTE),

  EMPLOYEE_TYPE VARCHAR2 (150 BYTE),

  NUMBER OF TOTAL_HOURS_BOOKED

  IDENTIFICATION NUMBER,

  DESCRIPTION VARCHAR2 (10 BYTE)

  )

  CREATE INDEXES XXVDB. IDX_TWT1 ON XXVDB. XXVDB_TMST_WEEKLY_T (EMPLOYEE_NUMBER);

  CREATE INDEXES XXVDB. IDX_TWT2 ON XXVDB. XXVDB_TMST_WEEKLY_T (WEEK_ENDING_DATE);

  CREATE INDEXES XXVDB. IDX_TWT3 ON XXVDB. XXVDB_TMST_WEEKLY_T (EMPLOYEE_NUMBER, WEEK_ENDING_DATE);

  CREATE THE TABLE XXVDB. XXVDB_TMST_WEEK_BASE_HRS (VARCHAR2(10 BYTE), DATE, NUMBER, NUMBER OF HRS_BOOKED CALC_BASE_HRS WEEK_ENDING_DATE EMPLOYEE_NUMBER);

  CREATE INDEXES XXVDB. IDX_TWBH1 ON XXVDB. XXVDB_TMST_WEEK_BASE_HRS (EMPLOYEE_NUMBER);

  CREATE INDEXES XXVDB. IDX_TWBH2 ON XXVDB. XXVDB_TMST_WEEK_BASE_HRS (WEEK_ENDING_DATE);

  CREATE INDEXES XXVDB. IDX_TWBH3 ON XXVDB. XXVDB_TMST_WEEK_BASE_HRS (EMPLOYEE_NUMBER, WEEK_ENDING_DATE);

  SELECT COUNT (0) IN THE XXVDB. XXVDB_TMST_WEEKLY_T;

  -752546

  SELECT COUNT (0) IN THE XXVDB. XXVDB_TMST_WEEK_BASE_HRS;

  -416032

  I have to update the first table based on the join with the second table condition.

  Merge into XXVDB. XXVDB_TMST_WEEKLY_T HAS

  Using (Select employee_number, week_ending_date, calc_base_hrs, XXVDB hrs_booked. B XXVDB_TMST_WEEK_BASE_HRS) (B.employee_number = A.employee_number and A.week_ending_date = B.week_ending_date)

  When matched, then update Set A.normal_hours = B.calc_base_hrs, A.total_hours_booked = B.hrs_booked;

  Plan

  MERGER of STATEMENT ALL_ROWSCost: 4 bytes: 66 cardinality: 1

  7 MERGER XXVDB. XXVDB_TMST_WEEKLY_T

  6 VIEW APPS.

  5 NESTED LOOPS

  Cost of 3 LOOPS IMBRIQUEES: 4 bytes: 2 532 cardinality: 1

  1 TABLE ACCESS FULL TABLE XXVDB. XXVDB_TMST_WEEKLY_T cost: 2 bytes: 2 510 cardinality: 1

  2 INDEX RANGE SCAN INDEX XXVDB. IDX_TWBH2 cost: 2: 4 413 cardinality

  TABLE ACCESS BY INDEX ROWID TABLE XXVDB 4. Cost XXVDB_TMST_WEEK_BASE_HRS: 02:00 cardinality: 1

  This Merge statement to take less than 60 seconds, is now more than 2 hours to complete.

  Am I missing something?   The only thing I remembered it doing, is to drop the first table XXVDB. XXVDB_TMST_WEEKLY_T, it filled again all the records and then run the Merge statement.  Before you delete the table, it allows to launch in a minute.  I've recreated the index as well.

  -Anand

  > CREATE TABLE XXVDB. XXVDB_TMST_WEEKLY_T (NUMBER (10) EMPLOYEE_NUMBER,)

  Why EMPLOYEE_NUMBER above the NUMBER data type, but EMPLOYEE_NUMBER below is the VARCHAR2 data type?

  > CREATE TABLE XXVDB. XXVDB_TMST_WEEK_BASE_HRS (EMPLOYEE_NUMBER VARCHAR2 (10 BYTE)

  That's why INDEXES on these columns are NOT used.

  change to MERGE to be as below

  (TO_NUMBER (B.employee_number) = A.employee_number

• in System 32 Spoolsv.exe taking 90% of the CPU usage.

  Original title: spoolsv.exe in System 32

  in my task manager processes, spoolsv.exe exists that uses more than 90 percent of one of my cores of the processor. It is in System 32. I want to know what is it and why it uses 45% of my CPU?
  How can I stop it permanently?

  Hello

  Method 1.
  This happens usually when the printer spooler folder is filled with unwanted files. You can resolve this problem by following the steps below:
  a. go to start, settings, then click Control Panel
  (b) in the Control Panel window, double-click first administrative tools, then Services.
  (c) in the right pane of the Services window, locate and with right-click on print spooler and then select stop.
  d. you have stopped this process, leave the window open. Now open my computer and navigate to the following folder.
  c:\windows\system32\spool\PRINTERS
  e. delete all files in the Printers folder. After you delete the files in this folder, return to the Services window, right-click on print spooler and select start reactivate service.

  Method 2.
  Although the true spoolsv.exe file is a secure, many malicious programs are known to dress up in spoolsv.exe. Sometimes the security program installed might not be fair enough. I also recommend you update your security software regularly.
   
  a. follow the link below to start the free online scan:
  http://OneCare.live.com/site/en-us/default.htm
  b. run the malware removal tool from Microsoft.
  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en
  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  I would also recommend to install the free security software from Microsoft, which is easy to install and updates automatically
  Here is the link to download.
  http://www.Microsoft.com/securepc

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• C:\WINDOWS\SYSTEM32\VERCLSID. EXE IS A VALID WINDOWS FILE

  IS THIS A VALID WINDOWS FILE?

  MCAFEE FLAGGED AS SUSPICIOUS OR UNKNOWN AND I BLOCKED IT

  IS IT IS VALID, WHAT IS DOING?

  ONCE I UNDERSTAND I HAVE TO UNLOCK THE VERCLSID SYSTEM IN THE WALL OF THE MACAFF FILE

  Google is your friend:

  http://www.Google.com/search?q=Verclsid.exe&ie=UTF-8

• nimxs.exe automatically processes the call VISA::viFindRsrc.

  The process nimxs.exe running in the background automatically call VISA::viFindRsrc whenever the device I tested is connected to my computer. The device is connected as a network card. This process is finding various devices on the network and with up to 15 seconds to complete each time. Meanwhile, it tends to lock the resource, I'm trying to send commands to with Labview and causes the following error.

  VISA: (HEX 0xBFFF000F) specified type of lock cannot be obtained, or specified operation cannot be performed because the resource is already locked.

  This problem started when I updated NI-VISA of 4.1 to 5.1.1. Is there a way to disable this automatic search for network equipment? The only time I want to pick up equipment is when I opened NOR-MAX.

  Hey Ryan,

  Is this a problem for you to have the service disabled? You should not need unless you want to be able to automatically detect the LXI network devices.

  We will continue to investigate the issue and rated fixes for future versions.

• acrodist.exe rely on its own and hogging continually 1 processor

  In our company, we noticed on several machines acrodist.exe (Acrobat Distiller) environment is randomly maxing out CPU 1 kernel. Dual-core computer so now it is 50% use, use of 25% of hearts, octa-core 12.5% CPU utilization.

  It is same when the end user does not use an Acrobat or PDF-related applications. After investigation, using Process Explorer, we noticed about 10 minutes after the first start, for some reason acrotray.exe called distill (acrodist.exe) in the context of users by using the following command line:

  acrodist/n/p - UseSystemFonts Q:15

  acrodist.exe process then proceeds to run 1 CPU maxing out indefinitely until it is completed manually from the Task Manager.

  Using Help files , I know what that switch parameters n/n/n (a new instance of the Distiller) and /Q:15 (quit after 15 seconds of completion) are, but I cannot know what p - UseSystemFonts ask to be distilled to make. Anyone got any ideas? Our theory is that's stuck dealing with a police force but no idea that is. Any help would be appreciated.

  
  

  We have tried to analyse the process using Process Explorer and Process Monitor threads, but have not been able to get something useful from what acrodist.exe is doing or what he's stuck on.

  Confirmed the existence of this problem at least 140 of our machines from Win7 SP1 (32 and 64 bit) with Acrobat XI (v11), Standard and Pro versions are affected.

  We have determined when acrodist.exe is blowing further than trying to read the path defined in the string (by default) under:

  HKCU\Software\Adobe\Acrobat Distiller\AdobePDFSettings\

  This string contains the local path below:

  C:\ProgramData\Adobe\Adobe PDF\Settings

  but for some reason, it fails to read the C:\ProgramData\... path. In our environment, it was because of our 3rd party user profile virtualization solution called AppSense Environment Manager. Stopping AppSense Management acrodist.exe customization EM has apparently solved the problem.

  In addition, I just wanted to add, this affected only users who had launched Acrobat Distiller in the Start Menu at least once before, this action has added the registry location in their profile what EM AppSense could not read. If they have never launched the tool to distil then they usually have a problem, even if they use daily from Acrobat. Most users we found will that in Acrobat, only more advanced power users will open to distill, so this is why it did not affect all computers.

• How to close Photoshop elementsautoanalyzer.exe during updates when the office is empty

  Just installed Prime Minister 11 elements (already had installed Photoshop) and tried to do the updates.  Everything was closed on my desk, but as it progressed through the installation he told me to close the autoanalyzer.exe elements.  Nothing was open on my desk.  Update showed only 1 second to complete the "update photograph Camera RAW 7.4".  What does this computer illiterate user?  I tried to do the update again and the same thing happened while the updated list were more Manager of the elements, a few updates needed for the Photo and the Prime Minister.  Thanks for any help

  Hi Diz2,

  Please launch the Task Manager by pressing Ctrl + Shift + Esc and close the autoanalyzer.exe elements resulting from process to try the update of first 11 items new. It should work.

  Kind regards

  Abhijit

• How to find the lock and more information why the prg conc taking too long

  Oracle Apps R12-Orader management
  
  Hi all
  
  I am new to Oracle Apps, we I run my simultaneous program
  its taking too long to complete. How to find that there is a lock to produce in the table while that simultaneous execution of the program, another way to find why the simultaneous program takes too long to run and how can you speed up the process.
  
  Yesterday we made a few changes to speed up the process with our DBA to accelerate the simultaneous program
  
  The first simultaneous program takes 2 h 30 and after these changes taking 1 h 45. Please suggest it's okay
  
  Connected with the responsibility of the system administrator.
  
  Manager - set - Manager of the standard.
  
  Set the value of PROCESS like 15 (instead of 10).
  
  Set the value of SECONDS of SLEEP as 10 (Changed from 30).
  
  Manager - set - Manager2 Standard.
  
  Set the value of PROCESS like 15 (instead of 10).
  
  Set the value of SECONDS of SLEEP as 10 (Changed from 60).
  
  
  Any suggestion on how to find why it takes too much time.
  
  Any help is highly appricatable
  
  Thanks and greetings
  Srikkanth.M

  Hello

  I suggest you draw the simultaneous program and analyze the trace file. To do this, mark the simultaneous program as Trace enable (RESP system administrator, Menu simultaneous > program > define) and then run the program and download the trace file after dealing with tkprof. Check which are the staements who take most of the time and try to optimize them.

  It will be useful.

• My VCAgent.exe seems to be corrupted.

  Been noticed my cpu running too lasts for a few days and while they inspected my services, I noticed VCAgent.exe taking about 70% of my cpu. Any suggestions on how to clean this virus out of my system? I'd do a Regedit, but I don't know what I'm looking for. Thank you very much.

  Thanks much for the reply. I did a full clean on my computer and then at the request of a chkdsk which, unfortunately, is stuck in a loop. I had no choice but to restore from there on everything that I tried to get out of the loop did not, so that took care of my problem of potential viruses. Thanks again.

• is equivalent of LabVIEW player - possible to run a vi on a computer without complete labview installed using free software?

  Hello

  Neither affirm that labview player is no longer exist, is there an alternative that will allow finishes vi to run by using the pc without the complete installation of labview.

  I have a full version of labview 2010 on my laptop using one of 5 licenses available at my place of work. All 5 licenses are now being taken, but I would like to run finished vi on other laptops. Surely, I need not to buy another copy of labview or more licenses to run VI finished, requiring no modification.

  Thank you

  Andy

  Is it not the exe file generator included in complete Labview?

• application rundll32.exe not found application not found __updspapi.dll

  I have two problems at the moment.
  The first occurs if I try to open most of the icons in my Control Panel then I get the message: application not found c\windows\system32\rundll32.exe.
  The second issue is when I try to run a file I am asked to select a program to run it: installation of windows service pack and then get the message: application could not start because updspapi.dll is not found.
  Thanks in advance for any help or advice.

  DanielTL88 wrote: I have XP SP3, AVG Internet Security - with the LinkScanner etc (no previous software)

  She appeared saying that he had found that a Trojan horse and I got rid of it - but since all the shortcuts to programs go straight 'Open with' window...

  You didn't have an antivirus application installed before installing AVG Internet Security (free trial)? See...

  Can I install MSE [or another anti-virus application] to clean my already infected computer?
  http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• XP user account being of error "Windows cannot find c:\documen~1/user/locals-1/temp/crss.exe. Make sure you typed the name correctly.

  Hi, I have two problems

  First on my brothers account, I get the following error message: windows cannot find c:\documen~1/henry/locals-1/temp/crss.exe. Make sure you have entered it correctly the soul. In this story, I can't click anything that runs - IE without access to the internet or anti-virus software, I think its something to do with rstrui.exe or rundl32.exe.

  Secondly, I do not get the first error message on my account but I can't run any programs. He can't know what to use to open it. But the guest account seems to work very well.

  I think I have a Trojan horse, which is messing with my registry. I tried my computer with anti-spyware and malware scanning software, but it is no longer showing me what is infected, in safe mode with network. I tried "SUPERAntiSpyware" and "Malwarebytes' Anti-Malware.

  I looked on the internet but nothing I tried works. Please can someone help me.

  Thanks in advance.

  Hi Robzy_k4,

  You will need to update your antivirus and run a full scan of the system in safe mode, until you see that your system has no infection found.

  Once your system is virus-free, your desktop and eerything should be normal. It is likely that you are not able to open exe files open with dialog box:

  You will need to rename regedit.exe to regedit.com (my computer-> tools-> option-> view file-> remove tickmark to "Hide extension for known file types"-> ok-now right click on local disk C:\WINDOWS\ online search of regedit.exe rename regedit.com).

  Then click on Start-> Run Type &-> Regedit-> ok.

  Go to HKEY_LOCAL_MACHINE\Software\Classes\Exefile\Shell\Open\Command
  (you will have to press on + to achieve order)

  Now, double-click default slot right windows and then change the value in this box for '%1' % *.

  Repeat the same for HKEY_CLASSES_ROOT\Exefile\Shell\Open\Command

  Close regedit, restart your pc and check if its working.

  Now on the connection of your brother, once all the steps above are performed, click Start-> run, type & -> regedit-> ok navigate to HKEY_CURRENT_USER-> software-> Microsoft-> Windows-> CurrentVersion-> Run and on the right side, find the key that point to crss.exe in the temporary location and delete it.

  You can also check: http://support.microsoft.com/kb/310585

  I hope this helps.

• using more than 800 000 K memory of svchost.exe

  Frankly, it seems that many questions post here have recently answered.  However, I thought I'd ask.

  My 64 bit computer, Vista SP2 system, has begun recently in does not not having been in Hibernation.  Of course, it opens and seems to work, but things are very very very slow, or even lock up.  Then... I opened by the Windows Task Manager and find a Schost.exe taking up huge amounts of memory.

  I have Malewarebytes and Kaspersky... or find any maleware or viruses.  So, what could be the problem?  What could be the solution?

  Near: right now I am unable to use my computer in this State.  Physical memory is more than 71%, even with low use of less than 5% CPU.

  Thank you

  Hello

  It offers good information about why it is running:

  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-svchostexe-and-why-is-it-running/

  See you soon.