Verification for the loading of unauthorized kernel (ESXi only) modules.
Can someone tell me how to put this:
4.2.16.1 VMware provides digital signatures for 3 party kernel modules that meet certain requirements. By default the ESXi host does not load the kernel modules which do not have a valid digital signature. This behavior can be overridden; However, a warning is sent to the alert system administrator logs any time that an unauthorized module is loaded.
4.2.16.1.1 the core of 'messages' log file will show an entry of any time that an unsigned module is loaded into memory. This log file should be monitored and analyzed for this text. The message will be of the form
4.2.16.1.2 ALERT: Elf: NNNN: XXXXX kernel module has been loaded, but has no attached signature. Where "NNNN" is a number and "XXXXX" is the name
It refers to 15 HMT in hardening paper.
Thank you
Hello
I think that this is serious. If you have a kernel module that is not signed, while the kernel module is NOT blessed by VMware. However, you may have blessed it yourself, and you must have it because it is from a third-party trust provider. In this case, you have two options, check checksums and communicate to the supplier you need all your kernel modules to be blessed by Vmware.
This is very similar to the alteration of the Linux kernels and some cannot be contaminated (by security policy), and others allow it. You need to know what the module is and why he has been charged in the first place and if use you it again.
In this case, the knowledge is your friend, starting with the list of those signed and functional not from there. You can use the logfile approach as well, but in both cases, you can find unsigned modules.
To define levels of more top/more detailed log look at Article #1004795
Best regards
Edward L. Haletky
VMware communities user moderator, VMware vExpert 2009, 2010, 2011,2012
Author of the books ' VMWare ESX and ESXi in the business: Planning Server Virtualization Deployment, Copyright 2011 Pearson Education. ' Of VMware VSphere and Virtual Infrastructure Security: securing the virtual environment ', Copyright 2009 Pearson Education.
vSphere Upgrade Saga - virtualization security Table round Podcast
Tags: VMware
Similar Questions
-
Can I use my iPhone for the load
Can I use my iPhone for the load?
Yes
-
Hi experts,
I tried to load the data of EBS in HFM via FDMEE.
Importing data in the rule of loading, I have encountered an error in loading.
2014-11-21 06:09:18, 601 INFO [AIF]: beginning of the process FDMEE, process ID: 268
2014-11-21 06:09:18, 601 [AIF] INFO: recording of the FDMEE level: 4
2014-11-21 06:09:18, 601 [AIF] INFO: FDMEE log file: D:\fdmee\outbox\logs\TESTING_268.log
2014-11-21 06:09:18, 601 [AIF] INFO: user: admin
2014-11-21 06:09:18, 601 INFO [AIF]: place: Testing_loc (Partitionkey:3)
2014-11-21 06:09:18, 601 [AIF] INFO: name: OCT period (period key: 31/10/14 12:00 AM)
2014-11-21 06:09:18, 601 INFO [AIF]: name of the category: real (category key: 1).
2014-11-21 06:09:18, 601 INFO [AIF]: name rule: Testing_dlr (rule ID:8)
2014-11-21 06:09:19, 877 [AIF] INFO: Jython Version: 2.5.1 (Release_2_5_1:6813, September 26 2009, 13:47:54)
[JRockit (R) Oracle (Oracle Corporation)]
2014-11-21 06:09:19, 877 INFO [AIF]: Java platform: java1.6.0_37
2014-11-21 06:09:19, 877 INFO [AIF]: connect the file encoding: UTF-8
2014-11-21 06:09:21, 368 [AIF] INFO: - START IMPORT STEP -
2014-11-21 06:09:24, 544 FATAL [AIF]: error in CommData.insertImportProcessDetailsTraceback (most recent call last): File '< string >", line 2672, in insertImportProcessDetail
RuntimeError: No periods have been identified for the loading of the data in the table 'AIF_EBS_GL_BALANCES_STG'.
2014-11-21 06:09:24, 748 FATAL [AIF]: load balances data launch GL error
2014-11-21 06:09:24, 752 [AIF] INFO: end process FDMEE, process ID: 268
I found a post related to this error, but did not respond.
I know I'm missing something, gurus please help me to overcome this error.
~ Thank you
I managed to overcome this problem,
This was caused due to an error in the map of the time.
In the mapping of source, the name of period should be defined exactly as displayed in the EBS.
for example: {EBS--> OCT - 14} FDMEE {mapping source--> OCT - 14}
The names of the time must be identical.
-
What is the name of file Loader (FBL) for the loading of languages to the employee?
What is the name of file Loader (FBL) for the loading of languages to employees?
Hi, the best place to search for questions like these is OTN, Oracle Technology Network. If you have any questions about the CLOUDS and in partnership with Oracle, we will be more than happy to help! Thank you!
-
Collapsed bridge camera of conclusion for the loading of pictures.
Collapsed bridge camera of conclusion for the loading of pictures. Good connection. Low pictures load in 'Photos' in my iMac, but not on the bridge on the same computer.
Have been loading photos in my Mark III Bridge. It worked automatically in the past. Now "no device is found" works very well for pictures in the PC and iMac
If you use Bridge CC please updated for the latest version of the CC bridge, see Adobe Bridge does not some devices on Mac OS 10.11
Kind regards
Assani
-
How to 'Allow smoothing' for the loaded XML .jpg?
I have a thumb wheel image that loads a bunch of jpg. They are be enlarged rollover in 1,05.
I've seen pixelated at scale 1 x 1 as well as expanded.
I'm happy prettey how Flash renders the images with "Allow smoothing" on.
How would I do it for the loaded xml jpg? Would it be as a script in the main folder or in the xml file?
Here's how to load images in AS3:
function completeHandler_AppPopUps(e:Event):void{ //trace("thumbnail complete "+e.target.loader.parent.parent.name)//tells us when the loading is complete //size image into scroller (need only if I will have images at different sizes) resizeMe(e.target.loader.parent, 60, 90, true, true, false); TweenMax.to(e.target.loader.parent.parent, .5, {alpha:.7});//makes all thumb images at alpha=.7 after they are fully loaded //Tweener.addTween(e.target.loader.parent.parent, { alpha:1, time: .5 } );//caurina version TweenMax.to(e.target.loader.parent.parent, .5, {colorMatrixFilter:{contrast:1.1, brightness: .7, saturation: .5}});//makes all thumb images at brightness:0.5 after they are fully loaded }
I don't want to complicate things more than necessary, but just in case it's needed here is the complete code for the edification of the wheel section:
/////Parse XML //build scroller from xml function buildScroller(imageList:XMLList):void{ trace("build Scroller"); for (var item:uint = 0; item<imageList.length();item++) { var thisOne:MovieClip = new MovieClip(); //outline var blackBox:Sprite = new Sprite(); blackBox.graphics.beginFill(0xFFFFFF); blackBox.graphics.drawRect(-1, -1, 62, 92);//-1,-1 places rectangle 1px left and up.62, 92 draws rectangle 1px wider on all sides of placed image dimenstions of 60x90 blackBox.alpha = thumbFadeOut;//setting Border Tweens thisOne.addChild(blackBox); thisOne.blackBox = blackBox;//setting Border Tweens thisOne.x = thisOne.myx = (60 + padding) *item;//replaces the line above for scale tweenw roll over calculation. "myx" is a made up term which defines the position. 61 is the width of the thumb thisOne.itemNum = item; thisOne.title = imageList[item].attribute("title"); thisOne.link = imageList[item].attribute("url"); thisOne.src = imageList[item].attribute("src"); thisOne.alpha = 0;//makes all thumb images at alpha=0 before they are fully loaded //Loading and Adding the Images //image container var thisThumb:MovieClip = new MovieClip(); //add image var ldr:Loader = new Loader(); //var url:String = imageList[item].attribute("src"); var urlReq:URLRequest = new URLRequest(thisOne.src); trace("loading thumbnail "+item+" into Scroller: " + thisOne.src);//url ldr.load(urlReq); //assign event listeners for Loader ldr.contentLoaderInfo.addEventListener(Event.COMPLETE,completeHandler_AppPopUps);//tells us when the loading is complete ldr.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, errorHandler_AppPopUps);//tells us if there are any typo errors when the loading is complete thisThumb.addChild(ldr); thisOne.addChild(thisThumb); //create listeners for this thumb thisOne.buttonMode = true;//makes boxes act as buttons thisOne.addEventListener(MouseEvent.CLICK, clickScrollerItem_AppPopUps);//makes boxes act as buttons thisOne.addEventListener(MouseEvent.MOUSE_OVER, overScrollerItem_AppPopUps);//traces the title when the mouse is over the bounding box in the Output Panel thisOne.addEventListener(MouseEvent.MOUSE_OUT, outScrollerItem_AppPopUps);//traces the title when the mouse is out the bounding box in the Output Panel //add item scroller.addChild(thisOne); } scroller.addEventListener(Event.ENTER_FRAME, moveScrollerThumbs);//adding movement on mouse position trace("termination of build scroller"); }
in your listener to full charge, enable the property smoothing to the content of your charger (expressed as a bitmap).
function completeHandler_AppPopUps(e:Event):void{
Bitmap(e.currentTarget.loader.content).smoothing=true;
//trace("thumbnail complete "+e.target.loader.parent.parent.name)//tells us when the loading is complete//size image into scroller (need only if I will have images at different sizes)
resizeMe(e.target.loader.parent, 60, 90, true, true, false);TweenMax.to(e.target.loader.parent.parent, .5, {alpha:.7});//makes all thumb images at alpha=.7 after they are fully loaded
//Tweener.addTween(e.target.loader.parent.parent, { alpha:1, time: .5 } );//caurina versionTweenMax.to(e.target.loader.parent.parent, .5, {colorMatrixFilter:{contrast:1.1, brightness: .7, saturation: .5}});//makes all thumb images at brightness:0.5 after they are fully loaded
}
-
Recommended for the load of Apple pencil
I realize that I can plug my Apple pencil in my iPad to load. In addition, provided with the Apple pencil is an adapter of lightning... I used this map of lightning with my Apple 5 watt power adapter and the light provided with my iPhone cable to recharge my pencil to Apple as well. I have not, however, used the lightning with my iPad Pro 12 watt adapter adaptor and cable lightning because I guess it will be dangerous for the pencil of Apple... Am I wrong? In an effort to try to extend the life of my pencil to Apple and not to damage through loading wrong practices, I wonder what Apple recommended to load that my Apple pencil is?
Should be charge with the power adapter supplied with your iPad Pro.
-
I have big PCs and giant screens for the home edition, but for travel I am looking for a laptop for image loading on the road and the base LR sorting and marking of displacement.
2 questions for your experiences, the regulars of the forum, in my opinion:
1 1 TB HDD with an external 1 TB HARD drive as backup - rather than 256 or 512 GB SSD IB (reasons of $$$ and also to load all my images on a trip)
2. 14-inch screen 1366 x 768 or similar instead of full HD ($$$ reasons and because I tell myself that I can zoom in to check the focus on this screen very well)
Your comments and your experiences?
Oz
Sorry for not giving you enough information
Cameras include a D800. Last long trip saw about 600 GB of images that I kept on a laptop for about 100 GB of capacity, then on a portable HARD drive (with an another portable HARD drive for backup). I have not run LR on a laptop connected to hard drives external and thought that it would be better all around having large drive onboard
Computer laptop features include an i7, with a graphics card to support enough treatment LR for the process of cataloguing "on the trip.
-
Verification of the load balancer
Can someone suggest me, what is the best possible to check if my query selects are running on both nodes?The query specifies a number of active sessions on each instance.
TMP_USER has 3 active sessions on the instance 1 and 1 session active on the instance 2. So yes, the load balancing seems to work.
You can join gv$ session to gv$ sql by INST_ID select and sql_id to show the transaction.
-
Why make the audio for the whole sequence when you export only a small section?
If I export only a small part of my calendar, why the first emphasizes the provision of audio for the entire timeline?
Normally this wouldn't be a problem, except that my timeline has tons of audio on it and the window "made necessary Audio Files" may take 5-10 minutes.
Here is the link Jim referred to as:
-
I've been using Firefox as my default browser for years. However, beginning with FF11 and continues with FF12, it became so slow to load web pages that it has become practically unusable. IE, Opera, and Chrome are all must faster. If someone knows a solution, I'd love to hear about it.
I live in rural Texas and it is true that my ISP is not the fastest 'high speed' in the world - 1, 5 - 2.0mbps, but other browsers can handle this OK. No Firefox.
I tried to disable ALL add and extensions. I got FF up to bare bones - without tab, no whistles or bells - and yet it's very slow. I've already replaced my router - no help. I tried to empty the memory cache, settings, same run the «Speed Up My Firefox» software Nothing seems to help.
It is clearly a problem of Firefox. I'd like to go back to Firefox, but I don't have the patience to wait while he takes his own load time of web pages.
Any ideas?
Tom
I edited this post to remove some questionable information and keep only what I know works for me.
The setting network.http.keep - alive false seems to provide the greatest improvement, but I think that setting network.http... Max-connections to 64 maybe helped a little in my case, since I have a slow connection 'broadband '.
I also reinstalled FF12 with these changes, and the problem seems to be resolved.
For now, this seems to have solved my problems. If things start going downhill, I will return.
Thank you all for all the help and suggestions.
-
the power cord of the ac for my iphone charger 6 will work in the USB port in the car for the load
Looking for a car charger for my IPhone 6. Wondering if the cable operator in the House will work in the USB port on a car? It hurt my phone.
Yes you can. As long as you have in the car's USB port. It can load more slowly then wall charger, but it works! I load mine in the car all the time
-
Maxum interfaces for the load balancing wan
Hi all
You know the interfaces maximum wan that I can use for load balancing?
Hi Iimran,
Lets say your sonicwall has N interfaces. You can use the interfaces wan (N-1) for load balancing
Kind regards
Barath R
#IWork4Dell
-
Best approach for the loading of images asynchrounously in a ListField
I have a ListField, who draws a picture in each row that is loaded on the internet. I load the images and store them on the SD card, then notify the UI that the image is loaded and ready to fire. The only problem I have now is to know how to draw the image in the list without making the user feel as the entire list has been reloaded (IE lose the position of the index selected whenever an image is loaded).
In my loaded picture the callback method, I use the following code to refresh the list:
listField.setSize (dealsArray.length);
I tried to change for this to keep the selected index but I get an illegal state exception:
selectedIndex int = listField.getSelectedIndex ();
listField.setSize (dealsArray.length);
listField.setSelectedIndex (selectedIndex);
Any help would be appreciated to heighly
You can void an individual line in a ListField - I would like to try that.
-
What is required for the loading of Halo 1 on windows 7
load but after that intro screen becomes bland music continues
is there a download to help?
Try Windows @ troubleshooting-game error message - unable to find: C:\windows\system32\config.txt.
Hello
Welcome to the Microsoft community.
You want to know the system requirements for Halo1 and how to load Halo 1 in Windows 7.
How you installed the game on your computer?
Here's the answer to your question:
Minimum system requirements for Halo 1 and Halo are:
- Operating system: Microsoft Windows 98, Microsoft Windows second edition, Microsoft Windows Millennium Edition (Me), Microsoft Windows 2000 or Microsoft Windows XP.
- Computer/processor: 733 megahertz (MHz) processor.
- DirectX: DirectX® 9.0 or later. (DirectX 9. 0 b is installed by Halo).
- Memory: 128 megabytes (MB) of RAM.
- Hard drive: 1.2 gigabytes (GB) of free space on the hard drive.
- Video card: 32 MB with 3D Transform and Lighting capable.
- CD: 8 X.
- Sound: Sound card, speakers or headphones with multiplayer.
- * 56.6 kilobytes per second (Kbps) modem or 10 Mbps network card. The multiplayer servers require broadband to run a server.
- * In addition, you need a provider of Internet Service (ISP) or a local area network (LAN), if you want to play multiplayer games.
The game is compatible with windows 7. Here is a link to check the same:
Method 1:
Try to install the game in Windows XP compatibility mode and check if it makes a difference:
Most programs written for Windows Vista also work in this version of Windows, but some older programs might run poorly or not at all. If a program written for an earlier version of Windows does not work, you can try changing the compatibility of the program settings, either manually or by using the program compatibility problems.
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows
Method 2:
You try to install the game in a clean boot state to check if all software third party is in conflict.
How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 3 of the article mentioned above.
I hope that helps!
Please let us know if the problem persists or you need help on Windows.
We will be happy to help you.
Maybe you are looking for
-
Dear, Please note that after installing my HP printer LJ M125 M126 on Windows 7 (32-Bit); the printing process does not work normally. But the HP LJ M125126 Scan does not work with a pop up of error: The HP LJ M125126 Scan is not found. I tried to re
-
Pavilion G6 2004tx graphics...
Hello I baught my laptop (HP Pavilion G6 2004tx) on August 16, 2012. Configuration: OS: Windows 7 HB. CPU: i5 of 2nd generation. RAM: 4 GB of DDR3 memory GPU: 2 GB DDR3 - AMD Radeon HD M 7670 HARD drive: 500 GB I have a few questions related to the g
-
computer can not find the recovery disk
I have a notebook G72-B54NR, I had my computer reset. When I tried to reinstall windows 7 with the 2 recovery discs, I get a message saying that this computer has not detected a recovery disk. Thank you.
-
How can I change the Windows7 start sound? Not opening session to the sound account, there is no login since I'm the only one using this PC and a connection password just wasting my time. Startup sound that comes when windows7 is responsible, I do no
-
Extending from VM hard drive using $extendedCapacity
Hello all,.I am trying to expand the operating system partition once I used the hard drive Set command in this format. If anyone can help on how the syntax would be written to please?Get-disk hard - vm testvm | where {$_.} Name - eq 'Disk 1'} | toget