Windows startup sound

Similar Questions

• The Windows startup sound no longer plays

  Windows 7, 64-bit by using Windows Update.

  When I turn on the PC or restart the Windows startup sound does not play.  This has nothing to do with the sounds of opening or closing session.  We are talking sound startup only.  Any other system sounds work fine.
  Any ideas on what's changed here to reach?  Thank you.

  I agree. There is no solution to this problem so far.

  The alleged answer above re Steamer Service from NVIDIA might work if you have the service running... but I did not.
  I always have this problem on a laptop Dell D830 using SigmaTel High Definition Audio. The last time when the startup sound has played once was after I did a registry cleaning. Since then he has not played again.
  All other sounds play fine.
  Convince me that it is not a registry problem! Someone at MS should know the answer. Come out, come out wherever you are.

• How to disable windows startup sound

  I want to disable the sound my laptop lenovo makes when it turns on. It is really strong and unpleasant in class.

  Hello

  Control tab of control panel - sounds - sounds

  You can change the entire sound scheme or use highlight a sound, and then go to change
  one at a time.

  How-to: change the Windows Vista startup sound
  http://NeoSmart.net/blog/2007/how-to-changing-the-Windows-Vista-startup-sound/

  Pimp my Windows Vista: how to change your sound scheme
  http://www.vista4beginners.com/how-to-change-your-sound-scheme

  How to change Windows Vista (and Windows 7) appears.
  http://www.WinVistaClub.com/F29.html

  Change system sounds
  http://www.Microsoft.com/enable/training/windowsvista/sounds.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Take more time to start after changing Windows startup sound

  I run Windows 7 Pro on a 120 GB SSD and the operating system would usually start within 15 seconds, but me being silly I decided to change the startup sound, so I downloaded a few changer it starts up and changed the startup sound. So I turned off my computer and wanted to see if it would work. The first time, it's just frozed on the Asus BIOS splash screen. So I force off and then tried again, but this time the screen off for a good 10 seconds on a terminal like screen, then in the dark for 10 seconds and then it started. I could wait the extra 20 seconds, but I'd rather not. After that, I thought it was something to do with the imageres file in system32, so I replaced by a non-screwed upward the same problem occurs.

  Someone at - it suggestions on how this could be repaired?

  And please don't insult me in the comments, I don't think that was the thing the smartest thing I could have done.

  Hi Austin

  You must try to undo these changes.

  Uninstall the changer of its start-up and restore the original imageres.dll file.

  You can also view the system restore for a restore point created before these changes.

  FAQ system restore:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Let us know if it works for you.

  Concerning

• How to change the startup sound

  startup sound

  Is there a way to change the startup sound?

  In Windows 7, the real startup sound is built-in and cannot be changed. However, to work around the problem, you can uncheck Play Windows startup sound on the sounds tab and change the sound for the Windows logon event in the list. Tim Baets
  http://www.BM-productions.TK

• Windows 95 startup sound

  I know this is going crazy, but I really like the old windows 95 startup sound.  Now, I downloaded a sound mp3 in windows 95.  I don't know how to change to a .wav file, I think that it is what I have to do in order to put the sound in my sounds of wave file and then select and match upward with my startup sound.  The computer I have is a PC HP TouchSmart 310-(model 310-1125y) if anybody out there knows EXACTLY how do, please let me know, better yet, if would be cool if you could make a video to guide me through this and send it to me.   Thank you.

  Melvin

  H,

  Please try this free product:

  http://LP.koyotesoft.com/?sysid=410&AppID=100&CID=21908068773

  I hope this helps.

• Windows 7 startup sound

  How can I change the sound of starting Windows for Windows 7?

  Hello

  There is a good guide in this regard on the following link.

  http://www.SevenForums.com/tutorials/63398-startup-sound-change-Windows-7-a.html

  Kind regards

  DP - K

• Windows startup is slow

  original title: Windows start issue

  When you start the windows update takes about 5 minutes before you can use my computer?  any thoughts?  This all started after windows updates.

  Hello

  Use the startup clean and other methods to try to determine the cause of and eliminate
  the questions.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Start-up delays between the Windows startup and the logon screen

  I have two PC's that have essentially the same Intel motherboard, but with different form factors. The smallest has a less powerful CPU and a slower hard drive. Still more has a significant delay between displaying the logon screen and Windows startup. Between the two, the display shows a cursor that cannot be moved through the mouse for 30 seconds or more, while on the smaller than the slider shows only for about a second.

  I realize, the problem could be many things, but I'm guessing that material or a device sound driver. I watched the event logs, but I couldn't see anything strange. I expected to see a "CPU does not ' or"USB 3.0 controller has a hardware problem"kind of thing. I ran Intel IPDT but he did not find a problem. Device Manager displays all of the problems. There is no graphics card on a system. I unplugged the USB cable to the printer, but that did nothing. No games are installed on a system. Nothing seems to be overheating. There is no network drive. All drives are SATA and BIOS is set to AHCI.

  Someone at - it the words of wisdom about what should I look for in the event logs?

  If it were my system:

  1. I'd be more suspicious of malware, run ADWcleaner and have a good antivirus program
  2. I would use the manufacturer of my disk drive hard testing program to ensure that it is not a failure
  3. I would like to be sure that none of the drives are more than 75% in use
  4. I would check my memory using the auditor memory Windows 7
  5. I would like to install and run Autoruns to check what is in the startup process
  6. AND, above all, focus on the applications installed.  Some of them are notorious resource hogs who insist on running at startup.
  7. Remove Programs/applications from starting unless I really need to start

  Common unbelievers that cause slow-start ups:

  • Garmin Express
  • Skype
  • uTorrent
  • FrostWire
  • Trusteer

• When to start the windows 7 no sound is detected, but after the closure of the session window detects sound.

  When to start the windows 7 no sound is detected, but after the closure of the session window detects sound.

  Hello

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  1. don't you make changes to the computer before the show?
  2. are you referring to the startup sound?
  3. What is the brand and model of the computer?

  I suggest you try the steps from the following link:

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• How can I make Thunderbird start car with windows startup

  How can I make Thunderbird start car with windows startup

  You can by placing a shortcut in the startup folder of windows, just like any other windows program.

  However if you do, you are likely to encounter problems such as downloading email while still load the antivirus and the network is busy, announcing the arrival of machines on the network (which can be a network a) and any other program of a dozen are loading is heavy risk of timeouts and disconnections of the server as well as error messages that make little sense because they are something that still load.

  The bottom line is so safe that you can, but if there are any questions bring her out of there first.

• iMac startup sound

  I want to stop the startup sound. Could someone please tell how I can achieve this, plug the headphones does not work.

  I am the owner of the computer and I want to control it, I spent a lot of money on a computer that wakes up the whole family.

  Applications-> utilities-> Terminal

  sudo nvram SystemAudioVolume = 80%

  Password: your password; It will not, resonate but enter anyway and then the return key >

  <Re: How can I disable startup sound? >

  <Re: mute start permanently>

  <Re: how to disable or turn off sound Mac startup chime? >

• Re: Satellite L30-103 - stuck on Windows startup

  I had a problem with my laptop, I update my bios to version 3.10, all work fine for 3 weeks, but after a morning when I try to turn it on, I see that we believe that it at windows startup. I turned it and then turn it on again but the same problem. I'm trying to reinstall Windows XP but it long to start windows.
  What can I do?

  I think that there is a BIOS problem. Have anybody another version of BIOS?

  Please help me

  Post edited by: giovanni4ever2007

  Hey,.

  You have installed Windows XP from a normal disk Microsoft or Toshiba Recovery disk?
  Can test you with recovery disc, please?

  And why it must be a BIOS problem if everything worked for 3 weeks after the BIOS update?

• Qosmio G10: Qosmio and Windows startup Logo only appears during startup

  Hi all

  Strangely, I turned on the laptop and a white screen is all I can see - not even the backlight of the TFT screen. For I type my password to start blindly and press on enter, and the computer does its thing for 45 seconds (still nothing on the screen and no backlight either) and then all of a sudden the screen password of Windows and the backlight lights up as usual.

  So, indeed even if I can access my computer as usual, I can't access my BIOS, or make changes to the Windows startup.

  I haven't got a clue what the problem is? Any ideas?

  Thank you

  Warren

  Hello Warren

  Is it possible to test it with external display? Connect external monitor to the Qosmio and press your power button. I am really interested about result.

• Compaq Mini CQ 10 101SA no Windows XP sound error code C00D11BA drivers missing

  Compaq Mini CQ 10 101SA no Windows XP sound error code C00D11BA drivers missing

  Hello

  I have a Compaq Mini - about 3 years - and the noise disappeared today.  The sound icon in the lower right corner of the screen disappeared.

  In the device, other devices Manager screen is color yellow as is the Audio on Bus High Definition Audio device.

  XP sounds and Audio devices Volume Control Panel tab no. Audio Device.

  I think that the driver may be missing?  I don't have the start up CD and don't know where or how, download the drivers of its replacement.

  Any help is appreciated to get my sound back!

  Hello:

  This is the page for support and drivers for your laptop.

  You can try reinstalling the audio driver XP from there.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=4105117&cc=us&DLC=en&LC=en&query=CQ%2010%20101SA%20&tool=