Verification of application without any admin rights

Similar Questions

• Run the application with the admin rights

  Hello

  I am a network administrator and I have problems with an external application. While running the application does not require local administrator rights, the software does an automatic updates check when it is launched. There are updates once a week. If the application is launched without administrator rights, the software does not check. Our users do not have local administrator rights. The result is that the application gets overwhelmed and an administrator needs to log in order to to refresh.

  Here are the solutions I've tried so far:

  1. I ran the application using the command runas , which works, but is not practical as an administrator will have to provide the password every time.

  2. change the compatibility of the application to 'RUN as administrator'. I have disabled UAC to make this work, but the user must always supply a password. I could create a locked user who cannot log on to any machine, etc, etc, but this seems like a stupid solution. I might as well give all admin rights.

  3 to research more, I tried to use RunAsSpc (http://www.robotronic.de/runasspcEn.html). This seems to work well and did exactly what I'm looking for, but created two issues: no drives mapped and an access violation when printing that I won't have to worry about troubleshooting.

  I had to give all users local administrator rights until I have a solution. Is it possible to allow the application to do its updates without granting full administrator rights to the entire system? Any recommendations?

  Yes, let the program provider to build their program cleverly.  It is not going to be a solution to this.

  Otherwise, you will need to just have someone who has admin rights not login once a week and install the necessary updates.  A bit like Microsoft Office Update (requires an administrator to do so).

• I have mac should I buy to work on all the application cloud adobe without any lag?

  I'm working on especially after effect, first pro, Illustrator and fuse. I am currently using windows with 4 GB of ram. I'm unable to use one of these applications without lag.

  Now, I am planning to buy I have Mac. Can you suggest me a particular iMac where I can run these applications without any Lag?

  This has nothing to do with your hardware, it of just about bugs and code of 'bad '. Get a Mac, one even more powerful will change nothing of all this, especially given the limited available GPU acceleration options there. The only real truth is that you need more RAM. The rest belongs to Adobe fixing the bugs all over damned and specific program requirements.

  Mylenium

• ~/Applications without authorization of the Admin Setup, how?

  I just went through a program installation and the end of it, he asked my admin password that I do not give (I clicked Cancel), and yet it remains installed successfully to ~ / Applications.

  ~/Applications is locked in 'Read only' without an Admin password. How does it work? I'm guessing that if the system has the required permissions, it can install in ~ / Applications, which makes me wonder why he asked my password in the first place?

  Hello polarrrbear,

  Unless you have made specific changes to permissions on the folder, any user who is a member of the admin (default setting) group can write to the folder. There are some risks to it security. While it is just to have a file in / applications will trigger any execution, there are always a few things that malicious applications can use to fool you by throwing. Here is an example: https://blog.malwarebytes.com/threat-analysis/2016/08/pcvark-plays-dirty/

  I suggest you contact Apple directly on this subject through your comments: http://www.apple.com/feedback/

  or bug report: https://bugreport.apple.com/

• How to give Admin rights for specific applications in windows 7 Stater

  How to give Admin rights for specific applications in windows 7 Stater

  I have a problem in Windows 7 Stater Pack

  I do not know where to place the issue or create the question

  My problem is that I can give admin access to application specific to Windows 7 stater

  in fact I use photon AUNTIE I want to be accessed by a Local user Standard user is not an admin user

  Once I click on the icon of Photon to connect it always ask for admin password.

  I want to work on a local user without admin password

  Please help about this.

  Thank you.

  Hello

  Note: To be logged in as an administrator or enter creditionals administrator account to make changes

  Method 1:

  The prompt that you get is the setting on your computer user account control. You can change the setting and use them according to your requirements and run programs in the standard account. See the below links for more details-

  http://Windows.Microsoft.com/en-us/Windows7/what-is-user-account-control

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-the-behavior-of-user-account-control-by-using-the-slider

  http://Windows.Microsoft.com/en-us/Windows7/what-are-user-account-control-settings

  WARNING: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  Method 2:

  You can even use the steps below and check-

  1. right click on the program file , click on Properties.

  2. now click on compatibility and select run the program as administrator.

  3. now click on change settings for all users and click ok. Now, check to see if the problem resolves.

  I hope this helps. Let us know the results

  It may be useful

• Open with options: I want to add a new application to the list right click on file-> open with and rearrange the list so my search app is first. I know that I can use open with-> other and select any application, but it takes too much time since I u

  I want to add a new application to the list right click on file-> open with

  and also reorder the list so my search app is first / top of the list.

  I know that I can use open with-> other and select any application, but it takes too long I should use my intended application in this way several times a day.

  Basically, I'm looking for a configurable way configure open with, something more to send to Windows.

  Thank you very much for all the advice offered.

  The operating system, not you, not control that open with the menu command.

• Credit card information can be saved to the iPhone without any application

  Credit card information can be saved to the iPhone without any application

  To back up the data on an iOS device, the data must be connected to an application. You can put your credit card info in the Notes. You can put it in the field notes in a contact entry. Mind you, I do not recommend one of these unless you have an access code on your phone.

  Perhaps if you explained exactly what you're trying to do, somebody can formulate a sensible response.

• Maintenance without any third-party application

  I'm counting on Apple to include an automatically procedure maintenance under OSX without any third-party application.

  So he is wisely let my iMac all the night THERE for an OS X Maintenance?

  Any ideas will be appreciated.

  It is not necessary. OS X will run maintenance, the next time that the Mac is restarted.

• Help! Run any AIR Applications without Adobe AIR.

  Hello, I wanted to ask that is it possible to run AIR applications without having Adobe AIR on your computer. It is really annoying when you have to give your application to use someone, and then the person needs Adobe Air to run it. Any suggestions?

  Where to start...

  AIR is a bit like Java, in the sense that it requires a runtime must be installed. This engine has all the "stuff" that allows the application to run. Similarly, applications like 3DMax or Word require the operating system to be present for them to run. These programs are written using the API calls that are in the target operating system. Similarly, AIR and Java apps are written using the API calls that are present in their execution. To bring a full turn, the AIR is an application written in C, that uses the API for the target operating system. Thus, when you perform certain functions within the AIR, he knows how to execute the necessary functions of the operating system (if necessary). AIR also provides a large number of higher level and management features that make your life as a programmer much easier.

  Look at iOS or Android, we have the occurrence of the thing. Some developers write applications using Objective-C (iOS) or Java (Android) which are using the APIs specific to these operating systems. It's the same as writing your application in C like 3DMax.

• unauthorized user has my admin rights, I don't get any permission or need for admin to access...

  A hacker took over my computer, I have no right to administor, I get the error messages "Acess denyed administor of the need to fix, I can't uninstall unwanted programs pretty much everything I try I get no permission - I want to just my admin. rights of return and remove access from remote users, I am pretty sure that it isthey have tried to wire money from my bank account to another account" got my debit card # and 300.00 worn autour before I discovered & change of account number, I'm less than a guest on my computer I can't access recovery or restore to a previous date... I need help!         Thank you!   Barbara FalkSM * address email is removed from the privacy *

  Sorry, if your computer has been hacked then set through this forum is not possible. You have two options:

  • Perform a destructive factory restore.
  • Have the machine serviced by competent experts.

  Everything else is unlikely to get rid of the intruder.

• I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  Hello

  You will need to reverse the clean boot, as it is either incidental compared to
  the real cause of the problem. What, where you try to fix initially using the cleanboot?

  You can access Mode safe? Repeatedly press F8 as you start? If so you can try the configuration - control panel
  The Device Manager - graphics card - Double click on - driver tab - click the driver UPDATE - then
  Right click on the device and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure) is
  CTRL + ALT + DEL and the processes tab find EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
  3.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can do a repair installation that needs to save the data, but you will
  to reinstall the programs. This also requires correct Vista disks especially for OEM versions. You
  will need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - enter a bracket )
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Creating an application without a head without a user interface

  I use the NDK for about 2 weeks now and I can't seem to find any resource on the following blackberry Web site.

  I am creating an application without a head that would run every 24 hours on my blackberry.  I have the app created with Momentics headless and it does what I need it to do. But right now I need to have a button in a user interface to call him.

  What I'm trying to do is,

  1. Have created enforcement wihtout the need of a user interface for packing it or deployment using our company BES.

  If you can point me to a tutorial or an example that would be great.  Of course if you have a response to these two that is too !

  Thank you

  Lothus.

  Watch the timer shutter release for app without head, code snippets and explanations can be found here:
  https://developer.BlackBerry.com/native/documentation/device_platform/headless_apps/triggers.html#TI...

  If you need a more complete example, I can create one, but I don't know when I'll have the time to do it, he could be close to mid-January. But honestly, all the necessary code is already in the docs.

  Don't forget to register action TIMER_FIRED in your bar - descriptor.xml under your app without a head part, I think it is also covered in the docs.

• Examiner of Adobe Captivate 9 - PC admin rights required

  When we share with SME Captivate project to conduct a review, they must choose the examiner in ADMINISTRATOR mode.  Our security services and HE do not allow all users to have administrative rights to their PC.  Why did they need to have admin rights and are there other alternatives?

  Your IT Department may have extremely high restrictions. In my previous workplace, the it Department had moderated in place restrictions. Users could install optional and applications web browsers as examiner would work as well. If you have tried to install an application like Photoshop or Dreamweaver, the system could stop him.  In other organizations, where I worked, without installation of application would work. Talk to your IT Department and see if they can make Adobe Reviewer is part of the standard image that is installed with all office workers.

  You can share the following with your IT Department to ensure that it is safe to include:

  https://helpx.Adobe.com/Captivate/using/using-air-review-application.html

• Cannot run PP5.5 without domain admin credentials

  My computer at work is part of a domain and I have administrative rights on the computer and in the field, but when I try to run PP5.5 it does not completely load. It loads the file menu but then crashes. If I run PP5.5 by using the system administrator account main for the entire network that PP5.5 charge without any problem, as it also does when connected using the main system administrator account.

  I use the CS5.5 Master Collection and Premiere Pro is the only application to have that problem.

  One last idea... go on http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US and do some research for subjects 'likely' to see if Microsoft has an article covering your problem... with a fix

  As...

  domain security

  or

  authorization of Doman

  or

  ???

  In other words, of course, if you are running Windows and not Mac (I re-read this thread to just message and see no mention of your operating system)

• Satellite L300 - 17L goes into stand-by all the time without any reason

  Hello Eldorado,

  I'm sorry this isn't a question in relation to the subject, but I have L300 - laptop 17L and from time to time she stops (specifically put it yourself in stand-by) without any reason.

  It is not the cooler or something else...
  The battery is full, and what happens while I'm writing or working on the laptop computer in general!
  Local service says it's nothing wrong with the laptop, I'm so nervous, I can't work, it's interrupting my work...

  PLEASE HELP ME! Thank you

  Hello

  What happens exactly?
  Is - what the laptop stops or go in mode sleep?

  You said it happens from time to time, this means that it is not easy to reproduce this problem, and I think that the technician was not able to reproduce this is good?

  What applications are running if this happens?

  Have you tried to restore the laptop to factory settings using the recovery disk or recovery disk? Do this!
  Also check if your BIOS is up to date!