Satellite L300 - 17L goes into stand-by all the time without any reason

Similar Questions

• Satellite A300D-226 (PSAHCE) - battery is 0% all the time

  So the situation looks like this, got full battery, and then unplugged, then I used the computer and didn't seen the caveat on the set of reason without battery, so my laptop just turned off. Later, I plugged the cable from the charger and after some time, I recognize that the battery is not its 0% all the time. When I unplug the charger is shut off my computer.

  Can someone help me? Computer is 2 years. The light on the charger is plugged into the lighting is so its ok but the charger light is not lighting and when I type mouse battery on the corner of the screen, it says plugged in, does not support.

  "While I type battery on the screen it says ' 0% plugged in, does not support".

  Post edited by: kobaj

  Hey Buddy,

  Can you do a little test please?
  Remove the battery and try to start your laptop with AC adapter only.

  If your computer starts correctly it s just a malfunction of the battery, or AC adapter is affected. Of course, it could be mainboard itself too, but swap the battery or an AC adapter / CC should be the first step and is not that expensive.

  Check this box!

• Re: Satellite Pro A300-1EA - wireless connection, drop all the time

  Hi, I have a problem with my wireless connection fall all the time on my Satellite Pro A300 1EA.

  It happened earlier, but I've fiddled about a little with change of drivers and the removal of the connection settings for the registry and it then worked fine for months, until yesterday.

  There were several updates for Windows installed yesterday, but none of them have been updated driver for the wireless card, and they don't look like they should cause problems. The fact that the problem happened before makes me think that the updates can be anything to do with it.

  I use the * Intel PRO/Wireless 3945/4965/5100/5300 * for Vista 32 - bit version 12.2.0.11.3 drivers from the Toshiba download page.

  Other computers on the same access point have no problem, so I think it is specific to this laptop. The connection speed is normally 6 Mbps, but I cannot even check e-mail now without the abandonment of the connection.

  Laptop will be thrown against a wall soon if no one can help you.

  Thanks in advance.

  Edit: I've already made sure power settings are at maximum to the WLAN card, even if on battery, or what power management.

  Post edited by: mjbcrawf

  Hello

  Have you tried to use the Windows System Restore feature? After that your WLAN should work fine again.

  In addition, I can recommend the latest WLAN driver in the Intel page, it s version 12.4.xxxx. I installed the driver on my Qosmio laptop and don t have any problems with it: [www.intel.com].

  If you have any other questions, please let us know!

• Safari crashes all the time without report. Now, nothing happens

  Dear people,

  I'm on 10.11.2. Latest version of the software. MacBook Pro mid-late 2009. Until today, everything worked like a charm.

  And then Safari crashed all of a sudden all the time when I tried to open another tab (~ 5 have been opened)

  That's what I did:

  -J' all caches emptied

  -delete all cookies

  -remove all history

  -J' disabled all extensions

  -J' deleted Cache.db

  -J' tried Safari in another account - same problems

  -J' deleted all preferences

  -J' reinstalled Mac OS X

  No luck.

  And I get an error report or whatever it is. It keeps crashing.

  I need help please!

  Hey! Take a look at this. This temporary has helped a number of users here. Over time, everything should be resolved then wait for a while.

  A possible solution to the problem of address bar: disable the Safari Suggestions

  If you have problems to open Web pages, take a look at these techniques proposed by Apple of troubleshooting.

  https://support.Apple.com/en-us/HT204098

  Go to the Safari menu (at the top right of your screen next to the Apple icon), choose 'Quit Safari'

  Press the "Shift" key and while holding this button on your unique keyboard, click the icon of Safari on your Dock.

  Open Safari - Preferences - Privacy - data to remove any Web site.

  Open the menu to go with the Option (Alt) key - library - key locate Safari folder and place it on your desktop. Restart your Mac, open Safari and delete the file from your desktop.

  Also, try the following steps:

  Restart your Mac.

  Try to start:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once your Mac boot, restart dhcpd as you usually do.

• How can I stop the CC tool bar app popping up all the time for stupid reasons?

  10.10.3 OSX

  Adobe CC 2015

  Hi all

  I don't know if anyone else has had this problem, but since I did the update to 2015 CC from the CC app on the toolbar is constantly popping up for just... stupid stupid reasons. The most annoying is probably the internet disconnect reminders. Wifi disconnects briefly here and there (it's Comcast and we have already spent hundreds of hours waiting on the Tech support and goes to get the router replaced 6 times this year - so no, it is not best done) since the upgrade to CC2015 Adobe CC seems to have composed of frustration and to remember that the internet is out by switching me on the main Virtual Office , popping up and telling me it can't connect to the internet.

  Why it does this, and how it stop? I can just kill the process and prevent it from starting in the first place, but it's a pain in the butt when it comes to fonts typekit, synchronization, so ideally, I want to make it work if possible...

  Andrew, please update application creative cloud to the latest version:

  1. remove the cloud creative app.

  • Using creative cloud | Uninstall the creative cloud desktop application
  • https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  2. install Creative Cloud app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

• My iPhone6s pairs with ONE single device (phone link2cell). will pair with something else, and "bicycle wheel" changes all the time! Any suggestions?

  My iPhone6s pairs with ONE single device (phone link2cell). will pair with something else. At the opening of the Bluetooth window "bicycle wheel" next to "Other devices" is always running as if the search! Any suggestions?

  When you open the Bluetooth section in the settings, you can still see the spinning wheel, because it is in discovery mode and is actually looking for other devices in the range. Other devices must be in discovery/torque for the device mode to find them. However, I'm not sure you can be associated with multiple devices at the same time with the iPhone. You can have multiple devices matched on the phone, but you can always not more than one partner at the same time. It depends on what it is you are trying to pair.

• Satellite L300 - 17L - impossible to use the keys FN under Win XP

  I recently bought a Toshiba Satellite L300 - 17L and I can't use the combination of keys (Fn + F1, F2...).
  I downloaded all my drivers Toshiba s website... but nothing... all utilities... and nothing.
  I use a Win XP OS

  Please, if you can help me...

  Hello

  As I m wrong not the Satellite L300 - 17L belongs to the PSLBCE.
  You must choose this series to download driver.

  I can find on the European driver Toshiba page all the necessary XP drivers for this series and as much as I know to install the * Modules * common for Win XP get the FN keys feature!

  If please check this and reinstall the common Modules!

  Good bye

• Satellite L300 - 17l - need Touchpad drivers for Windows 7

  I have the Satellite L300 - 17l. I can't find the touchpad for Windows 7 drivers, so I can't scroll using my pad. How can I solve this problem: S

  Install the driver for Windows Vista. It should also work under Win7.

• Satellite A200 - overheating all the time

  Hi y ' All

  I have a satellite A200 laptop computer that keeps overheating all the time.
  I tried to do the thing of compressed air and she always does.
  Especially when am games online.
  I've had this laptop for about a year now, and it already has an accident and burn on me and everything lost hard disk.
  But this overheating is really annoying me.
  I still have the clear fan so that it still works ok.
  And there is no dust or dirt there either.
  Can someone tell me what could be the problem?
  And also I would like to know how I can format it so, it doesn't let me do.

  Any suggestions would be appreciated muchly

  See you soon

  Wolfette.

  Do you use the certified Toshiba graphics card driver?
  You should do this in order to ensure that the graphics card would not overheat.
  The driver of Toshiba GPU supports protection against overheating and control the dissipation of the heat created by the graphics chip.

  But if you already use the Toshiba drivers, then the problem could be more complicated.
  In this case, the laptop must be verified by technician ASP.

  Maybe the thermal grease that is placed between the CPU and the GPU must be renewed.
  At the time the thermal fold becomes dry and rough and cannot conduct heat well.

  In many cases, it helps.

  Last but not least, you must use the Toshiba certified graphics card driver because this driver supports protection against overheating and the dissipation of the heat created by the GPU of the controls.
  You must also make sure that the laptop is on the table and that there is enough free space around the laptop to ensure good air circulation.

• Re: Satellite L300 - 17l - Toshiba Power Saver gives me error after installation

  When I bought my L300 - 17l all the drivers of Toshiba drivers download pafe worked out well.
  Recently, I have reinstalled my OS XP and now I started to install all the drivers again. LAN has been authorized, WLAN was ok, the display driver has been authorized.

  But when I get to install Toshiba Power Saver (URL: [http://support1.toshiba-tro.de/tedd-files2/0/pwrsav-en-20080519172104.zip]) it gives me this error (it shows the error or after I cliquerai on finish the instalation or before installation began, as you can see in this screenshot)-[http://www.picvalley.net/v.php?p=u/2381/9078672171740560287.JPG]

  I later tried this - i go ot Control Panel and open Toshiba Power Saver, but then it gives me another error: "CANNOT be opened because you do not have access rights to use 'TOSHIBA Power Saver'.
  I reinstalled my XP again and it still gives me this error... I wonder what could be the problem... Please help me

  Hello

  Satellite L300 - 17L belongs to the PSLBCE series.
  I chose this model number and found exactly the same energy saving that you tried to install.
  So I guess that you have chosen the right Power Saver utility for this model of laptop.

  But did you also install the common Module?
  This software must be installed first before installing other tools.
  Update you the Win XP for the State?

  Check it!

• Windows 7 on Satellite L300 - 17l - some drivers do not work

  My machine worked fine on XP but I installed the new copy of Windows 7. I installed most of the drivers and they worked, but when I come to install value added Package (in Toshiba says that VAP includes Power Saver). It seems complete installation very well, but then I can't find anywhere Power Saver. I tried to install Power Saver for Xp, but it seems that it's not good for Windows 7. Also, I installed the driver for Intel GMA X 3100 graphics, but in the views settings it shows that mobile Intel 965 chipset, which is actually my mmotherboard

  http://img203.imageshack.us/img203/6016/71178252.jpg

  Anyone have any ideas what I can do to make my Power Saver runs and tracks video driver?

  Post edited by: dissmissed

  Hello

  Satellite L300 - 17L is equipped with INTEL graphics 965GM (CRESTLINE) controller! If your GPU driver works fine!

  With regard to the VAP:
  First of all, you must update the BIOS to the latest State and then you should try to reinstall the VAP for Win 7.
  Don t install Power Saver for Win XP because it won't work!

  Good luck

• Satellite L300 - 17L - don't see networks wireless detected

  Hi all

  I just bought a Satellite L300 - 17L. All drivers seem to work except for the wireless card.

  First, I installed the driver indicated by this site, but I discovered that the map is actually a card Intel Pro 3945, not Realtek as specified in the section of the driver.

  Now I have installed the driver for the INTEL PRO 3945ABG, 11.5.1.15 version and also the PRO Set utility, and I do not see the networks wireless detected.

  I have a colleague who sees many networks using the same card but on another laptop.

  I also tested the switch on the laptop and it's on.

  Have you experienced these problems on your system? Please help me because I am really sad because of this problem.

  Thank you & best regards
  Valentine's day

  Hello

  As far as I know this laptop was equipped with the Intel 11 a/b/g WLan card.
  You should first check if the WLan router and wireless network cards use the same WLan standard.

  In the properties of card WLan (in Device Manager), you can check this settings, choose the Advanced tab.

  I would recommend also check if the WiFi network was activated properly

  Good bye

• Satellite L300 - 17l - memory card reader

  Hello

  I have the Satellite L300 - 17l. I wonder what is that thing on the left side next to the 2 USB slots - it's a card reader?
  It has a lid that can be pushed inside... A few friends told me that it's the slot for the memory card reader and all what I have to do is buy a card reader and install it in this slot.

  Is this true?

  Hello

  Please do not be angry on me, but in the s manuals you can find the chapter titled the grand tour.
  You can find description for each port and location on your laptop.

  Please check it out. If you have questions about this please let us know.

  BTW: I don't know what you do understand under the memory card reader, but check it please front of your laptop. You will find several digital media card slot. The description of this slot, you will find on page 34.

• Need to WXP WLAN driver for my Satellite L300 - 17L

  Hello

  First, I want to sorry for my bad English. I'm from Slovenia.

  I have this laptop (Satellite L300 - 17L). I installed on my Vista and XP Pro SP2 disk. The drivers I need to install for Windows XP? Because my WiFi does not work. In Vista, it works fine, but XP does not work very well.

  Can you help me please?

  Welcome,.

  Mario

  Hello

  I think that you the WLan card cannot be accepted because you used all just a bad driver WLan.
  As I m wrong not the Satellite L300 - 17L belongs to the PSLBCE series and it was equipped with the * WLan Intel chip (Golan) *.

  I think you have tired to install the Realtek or Atheros WLan driver.
  I recommend that you install the driver from Intel.

  This forum thread should help you a little more:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=126485

  Users here discussed on the same theme and user Chad posted a link to the Toshiba WLan portal where the correct driver WLan could be found.

  Good bye

• Audio drivers for Satellite L300 - 17l do not work

  I installed XP Sp2 on my Satellite L300 - 17l. I downloaded the drivers that I need on the official website of Toshiba. The display and the WLan and Lan drivers were ok but the audio driver does not work. After you have installed the windows drivers sound says "your new hardware has been installed, but may not work correctly.

  I tried the 2 versions of the driver that are in the official site, but neither one worked. I started to get worried if the sound hardware on my new laptop is ok at all?

  All solutions? I can not the problem for two days now... need help dudesa

  Before install you the audio driver you must first install the
  AUDIO patch * KB835221 * and * KB888111 *.
  Here are the patches from Microsoft. Search the net for download

  After installation, restart the operating system, and then try to reinstall the driver of its new.