Version 7.0 of the PIX and ASA 5500

Similar Questions

• How to monitor connections dropped and rejected on the PIX Firewall / ASA?

  I need to monitor the SNMP OID of the connections dropped and rejected on the PIX and ASA firewalls. Is this possible?

  If this is the case, what SNMP OID should I monitor?

  Syslogs and Netflow (introduced in version 8.2) are your options.

  No MIB can give you the numbers of conn.

  PK

• PIX and ASA static, dynamic and RA VPN does not

  Hello

  I am facing a very interesting problem between a PIX 515 and an ASA 5510.

  The PIX is in HQ and has several dynamic VPN connections (around 130) and IPsec vpn remote works very well. I had to add a PIX to ASA L2L VPN static and it does not work as it is supposed to be. The ASA 5510, at the remote end, connects and rest for a small period of time, however, all other VPN connections stop working.

  The most interesting thing is that ASA is associated with the dynamic map and not the static map that I created (check by sh crypto ipsec his counterpart x.x.x.x). However, if I make any changes in the ACL 'ACL-Remote' it affects the tunnel between the PIX and ASA.

  Someone saw something like that?

  Here is more detailed information:

  HQ - IOS 8.0 (3) - PIX 515

  ASA 5510 - IOS 7.2 (3) - remote provider

  Several Huawei and Cisco routers dynamically connected via ADSL

  Several users remote access IPsec

  A VPN site-to site static between PIX and ASA - does not.

  Here is the config on the PIX:

  Crypto ipsec transform-set ESP-3DES-ESP-SHA-HMAC-IPSec esp-3des esp-sha-hmac

  Dyn - VPN game 100 Dynamics-card crypto transform-set ESP-3DES-ESP-SHA-HMAC-IPSec

  Crypto dynamic-map Dyn - VPN 100 the value reverse-road

  VPN - card 30 crypto card matches the ACL address / remote

  card crypto VPN-card 30 peers set 20 x. XX. XX. XX

  card crypto VPN-card 30 the transform-set ESP-3DES-ESP-SHA-HMAC-IPSec value

  VPN crypto card - 100 - isakmp dynamic Dyn - VPN ipsec

  interface card crypto VPN-card outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  md5 hash

  Group 2

  life 86400

  crypto ISAKMP policy 65535

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  access list ACL-remote ext ip 10.0.0.0 allow 255.255.255.0 192.168.1.0 255.255.255.0

  Thank you.

  Marcelo Pinheiro

  The problem is that the ASA has a crypto acl defined between host and network, while the remote end has to the network.

  Make sure that the acl is reversed.

• Installation of site to site VPN IPSec using PIX and ASA

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-margin : 0 ; mso-para-marge-bottom : .0001pt ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;}

  I am a site configuration to site IPSec VPN using a PIX515E to site A and ASA5520 to Site B.

  I have attached the lab diagram. Consider PIX and ASA are in default configuration, which means that nothing is configured on both devices.

  According to the scheme

  ASA5520

  External interface is the level of security 11.11.10.1/248 0

  The inside interface is 172.16.9.2/24 security level 100

  Default route is 0.0.0.0 0.0.0.0 11.11.10.2 1

  PIX515E

  External interface is the level of security 123.123.10.2/248 0

  The inside interface is 172.16.10.1/24 security level 100

  Default route is 0.0.0.0 0.0.0.0 123.123.10.1 1

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-margin : 0 ; mso-para-marge-bottom : .0001pt ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;}

  Could someone tell me how to set up this configuration? I tried but didn't workout. Here is the IKE protocol I have used.

  IKE information:

  IKE Encrytion OF

  MD5 authentication method

  Diffie Helman Group 2

  Failure to life

  IPSEC information:

  IPsec encryption OF

  MD5 authentication method

  Failure to life

  Please enter the following command

  on asa

  Sysopt connection permit VPN

  on pix not sure of the syntax, I think it is

  Permitted connection ipsec sysopt

  What we are trying to do here is basically allowing vpn opening ports

  Alternatively you can open udp 500 and esp (or port ip 50) out to in on the two firewalls

• EIGRP running between the router and ASA by switch

  Hello

  Is that possible I can running an EIGRP between router and ASA by switch?

  Router and ASA connected to the switch with static route.

  Hi Tommy Chin.

  It is possible, we must advertise to the route between the router and ASA.

  Please provide your connectivity diagram to better explain.

  For example...

  interface GigabitEthernet0/0

  Description links to WAN router

  nameif OUTSIDE

  security-level 50

  IP 10.1.1.1 255.255.255.192 ensures 10.1.1.2

  Summary-address eigrp 100 10.1.0.0 255.255.0.0 1

  !

  Confiuration Protocol EIGRP

  standard access list eigrpACL_FR allow a

  !

  Router eigrp 100

  eigrpACL_FR distribute-list in the interface outside

  neighbor 10.1.1.3 OUTSIDE interface

  neighbor 10.1.1.2 OUTSIDE interface

  Network 10.1.1.0 255.255.255.192

  redistribute connected

  redistribute static

  !

  Kind regards

  Srinivas.

  Note: if it solves your problem it mark it as resolved.

• When it will be released version 6.3 of the PIX software?

  When it will be released version 6.3 of the PIX software?

  If all goes well at the end of this month or early April. Keep control on the BCC for the software, you will commit to the standard repository of PIX.

• Can I recover my old version of windows on the computer and use it on my old laptop?

  Original title: windows 8.

  Last year, I bought a new desktop computer Acer with windows 8 and installed my windows professional 8.1 on it!

  My question is! can I recover my old version of windows on the computer and use it on my old laptop because it was purchased with this PC AND how I to get it back?

  I am braking the rules by doing this? the original key was included with the purchase of my new Acer and I should be able to pick it up and install it on another device?

  If I can't, I'll have to buy a new one to upgrade my old windows laptop 7. I'm trying to save money! That's why I ask this question.

  Roger

  No, you cannot transfer the original license that is pre-installed on your Acer, it relates to it because it is an OEM license.

  The OEM of Windows 8 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :

  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  So, you need to invest in a new license to upgrade your laptop that is running Windows 7:

  http://www.Windows.com/buy

• I can't use PS & LR full version, so I uninstall the 'old' and install them again. But I just can't. How can I install them again in version complete?

  I can't use PS & LR full version, so I uninstall the 'old' and install them again. But I just can't. How can I install them again in version complete?

  Please check the help below document:

  Does not open App | Wheels of progress turn continuously

• break the link between the pix and sound

  Ugh I still don't know how to break the link between the pix and the sound in the timeline then of

  the sound and image are together. I know it of easy but have not yet found the way.

  Thank you everyone.

  Right-click on the clip and click 'Remove link' If you just want do temporarily, ALT click on the clip.

• ASA 1000V and ASA 5500

  I hope someone can help me to answer this question:

  Currently, we have redundant FWSM and consider a migration of standalone ASA 5500 series firewalls. However, we have a complete VMWare environment and look at the Nexus 1000V. I understand the Nexus 1000V and ESR architecture and implementation, and I don't understand that the ASA 1000V is designed for cloud environments. But I have a question about the ASA 1000V.

  Is it possible that a firewall series ASA 5500 be replaced by ASA 1000V? Basically, can an ASA 1000V to be a single firewall solution, or are that ASA 5500 is always necessary?

  Is there a datasheet anywhere that compares the ASA 1000V and ASA 5500 series?

  Thanks for your help.

  -Joe

  Depending on what you are using the ASA5500 series for now. If you use the ASA5500 for the remote access vpn and AnyConnect VPN, he will not rely on the first version of the ASA1000V yet.

  Here's the Q & A on ASA1000V which includes more information:

  http://www.Cisco.com/en/us/partner/prod/collateral/vpndevc/ps6032/ps6094/ps12233/qa_c67-688050.html

  Hope that answers your question.

• PIX and ASA Site to Site (ACL)

  I am trying to configure a VPN tunnel from site to site between my PIX515 (6.3) to a seller ASA 5510. We can get the tunnel when the ACL match is all of this period, but when we try to use TCP and a specific port, nothing comes through. Any thoughts? I would be able to limit the interesting traffic to what is not necessary? I'm only looking on the side of the ASA to access a resource on the side of PIX on 1521 TCP. The side PIX didn't need to access anything whatsoever on the side of the ASA.

  PIX side ASA x.x.x.x y.y.y.y side

  This ACL works...

  PIX

  ip host x.x.x.x y.y.y.y host access list vendor permit

  ASA

  host host x.x.x.x y.y.y.y ip access list vendor permit

  This ACL is not...

  PIX

  access list provider permit TCP host x.x.x.x eq 1521 host y.y.y.y

  ASA

  access list provider permit TCP host x.x.x.x eq 1521 host y.y.y.y

  Phase 1 Isakmp appears fine, fails just on the Ipsec data transfer.

  No, only versions 7.X code support the use of the tunnel-groups and group policies that are needed to implement filtering of VPN.

  I would suggest filtering traffic at the becauase of the SAA on the PIX, you will need to remove the 'permit sysopt-connection ipsec' command (if it is not already deleted) to start filtering on the external interface.

• IPSEC with the router and asa 5510

  Hi all

  I have problems connecting ipsec l2l. I have set up a router and asa 5510 make ipsec between them, but it seems to fail on the phase 1. I already check and I am 100% sure that is the key. You can a few shed light on the issue, I have. Here's the output debug I get the two system.

  Thank you

  Hello

  Isakmp policy match on both devices? What version of ios is running on the router and the asa5510

  Thank you

• VPN between PIX and ASA

  I have a vpn beteen two sites, which works very well. traffic is launched from site A and can connect to the site B ok.

  I just tried to set up traffic from site B to site A, but its failure the vpn encrypt point. I checked the acl and they match:

  site A (PIX)

  Crypto acl

  access-list site_a permit tcp host 10.51.3.32 10.0.0.0 255.0.0.0 eq 3389

  no nat

  no_nat list of allowed access host ip 10.51.3.32 10.0.0.0 255.0.0.0

  site B (ASA)

  Crypto acl

  Site_B list extended access permitted tcp 10.0.0.0 255.0.0.0 host 10.51.3.32 eq 3389

  no nat

  access-list extended sheep allowed ip 10.0.0.0 255.0.0.0 10.51.3.32 host

  the only difference I see is the extended acl, but it works well in one direction?

  Thank you

  Hello

  Using port-based ACLs for crypto card is not recommended, use IP access lists and configure VPN filters to implement port restrictions.

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

  Kind regards

  Averroès

• Where can I get a brief history of versions of Firefox, including the current and beta versions?

  I just upgraded to 3.6 to 5.01 and received a message saying that this version is obsolete, and should I upgrade to 6.0. OK, well I would like to know just where, in the history of Firefox, it will take me. This is not the first time I have wondered about the Firefox version history and tried to find the information. Looks like you have all hide information or are ashamed of something (the number of versions, maybe?) and make it difficult to find this information. I don't understand the logic of making this information so difficult to find, if it is available to all.
  (BTW, I'm a software sales engineer retirement for Tivoli/IBM products.)

  Kind regards
  Lynn Larsen

  Is not hidden; not a secret. Relatively easy to find.

  Enter "versions of firefox" (including the quotes) in Google, you can get: https://encrypted.google.com/search?sclient=psy & hl = in & lr = & tbs = qdr % 3Ay & source = hp & q = % 22firefox + releases % 22 & btnG = Search

  • In the "Advanced search" options, I have "Date" set for the year passed

  Second point, releases-MozillaWiki, gives you future versions, current and past.

  You'll see version news on all the 6 weeks, with a few numbers of minor version, if any, as you had with Firefox 3.6.x and earlier versions.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• How to remove an old version of MSN (with the butterfly) and messages inside?

  I always use an msn address.  My desk top still shows an older version (with the butterfly) and when you click on this old old messages are there.  How to remove this version and messages.

  Hello

  Please refer to this article.

  How to uninstall the MSN Explorer software for my computer?

  http://answers.MSN.com/solution.aspx?SolutionID=115dc6c5-4ae7-4e38-8e0b-3eac07d020fa

  If you still have any questions, then contact msn support

  How to contact MSN customer service

  http://support.Microsoft.com/kb/940784

  I hope this helps.