break the link between the pix and sound
Ugh I still don't know how to break the link between the pix and the sound in the timeline then of
the sound and image are together. I know it of easy but have not yet found the way.
Thank you everyone.
Right-click on the clip and click 'Remove link' If you just want do temporarily, ALT click on the clip.
Tags: Premiere
Similar Questions
-
Qosmio G50 - 10I - no synchronization on TV between the picture and sound
My problem is that there is no synchronization between the picture and sound (+ the sound is thin about 5 seconds +)
When I watch TV on Windows Media Center on the Qosmio G50 - 10II tried to change the settings in Windows Media Center, but some will escape.
How to connect this TV to the G50?
You use the HDMI cable that provides audio and video signal together at the same time or you connect the TV with two different cables (for audio & video signal)?Also check the settings in Realtek HD audio Manager located in the control panel. Here, you can change some sound effects for different outputs (digital speakers, HDMI) audio
PS: Last but not least install codecs. I recommend a package called K-Lite Mega codec package
-
Version 7.0 of the PIX and ASA 5500
Hi all
Is ASA 5500 series identical a PIX 515 or 525 or 535 with version 7.0... I still see some areas where it confused between version 7.0 of the PIX and ASA 5500 series... If not, what are the benefits of ASA 5500 on the PIX 7.0?
ASA is not the same as PIX, ASA is different hardware architecture. Although both can run the same code. One of the benefits of the SAA is that you can have an IPS module in it to make the prevention of intrusions.
Search for comprarison on CCO.
-
With GarageBand music itself inside the material and sound materials makes new music
With GarageBand music itself inside the material and sound materials makes new music
This kind of music can be put in the game when the background music
I don't know about this
Y at - it friends who know say me thank you very much
-
Break the RAID and the displacement of the OS to a new hard drive
Hello
I have a MSI GT683r laptop that is configured with two 500 GB Hdd that are configured in RAID 0. I wanted to disable Raid so I could separate my windows OS of my alternative OS on two different hard drives. Im a student, so I have lots of important programs and documents on my PC right now and I was wondering how can I mirror/clone/transfer my exisitng OS (as part of the RAID 0 stripe) and move it to a single hard drive. There are some caveats to this and how to go to that topic.Thank you very much in advanceRAID 0 distributes all your files on both drives. Break the RAID and you have data or programs, not even a bootable OS. So you have to backup your data before breaking the RAID.
To preserve your current operating system and transfer it to one of your readers courses will require using a 3rd hard drive to clone the current operating system from before the breakup of the RAID, so that it can then be cloned to one of the original disks.
It will not be possible if you store more data on RAID 0, that can be accommodated on a single disc. With your drives, if your current RAID 0 (maximum 1 to) has more than 500 GB stored, this cannot settle on one of your hard drives of 500 GB.
Tricky
-
Aggregation of links between poerconnect 5324 and poweredge with broadcom adapter
I am looking for information on how to build an aggregation of links between my powerconnect and three cards broadcom on my server. I want to create a bandwidth of 3 GB.
I created a team with suite ABEC 3.
My network have 2 VLANS.
At this stage, I could ping my server network, and I can ping the server in my network.
When I defined the three ports of the switch (where three cards are connect) as LASG and I defined in belonging to a VLAN these three ports whose status is F, I ping the server from the network, but I can't ping the server network.
Could someone tell me how I could build this bandwidth betwween my powerconnect, and poweredge?
Thanks a lot for your help.
-
VPN between a PIX and a VPN 3000
I'm trying to set up a VPN between PIX and a VPN 3000. All configurations are complete, but the tunnel has not been established. On the PIX, to 'see the crypto engine' and ' show isakmp his ' orders, I do not see the tunnel. Of "show ipsec his ' command, I can see the mistakes"#send"continues to increase when I try to connect to the remote network. Here is the copy - paste command:
Tag crypto map: myvpnmap, local addr. 10.70.24.2
local ident (addr, mask, prot, port): (10.70.24.128/255.255.255.128/0/0)
Remote ident (addr, mask, prot, port): (10.96.0.0/255.224.0.0/0/0)
current_peer: 10.70.16.5:0
LICENCE, flags is {origin_is_acl},
#pkts program: encrypt 0, #pkts: 0, #pkts 0 digest
#pkts decaps: 0, #pkts decrypt: 0, #pkts check 0
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0, #pkts decompress failed:
#send 12, #recv errors 0
local crypto endpt. : 10.70.24.2, remote Start crypto. : 10.70.16.5
Path mtu 1500, fresh ipsec generals 0, media, mtu 1500
current outbound SPI: 0
SAS of the esp on arrival:
the arrival ah sas:
SAS of the CFP on arrival:
outgoing esp sas:
outgoing ah sas:
outgoing CFP sas:
Obviously, the PIX identifies protected traffic but failed to establish the tunnel. I was wondering what could be the reason for these kind of mistakes? That means them growing '#send errors?
Thank you very much!
Sending error mean simply the PIX is grateful to encrypt this traffic, but there is no built tunnel and so it must drop the package.
you will need to look at why the tunnel is not under construction however, "sending error" are just a byproduct of some other configuration issue. On the PIX, it looks like you would have something like:
Crypto ip 10.70.24.128 access list allow 255.255.255.128 10.96.0.0 255.224.0.0
On the 3000 under the L2L section and the Local and remote network, you need the exact opposite of the latter, then it would be:
/ Local network mask = 10.96.0.0/0.31.255.255
/ Remote network mask = 10.70.24.128/0.0.0.127
If you have something else the tunnel will fail to come. Otherwise, we see that the Cryptography debugs the PIX and the trunk of the 3000 when the tunnel is built.
-
When I make a video call, the image and sound frequently burst
Original title: I.M video calls
When I make a video call the image and audio break-up often so that the link falls down and I have to again open the link that can be very frustrating
Hi geraldmallinder,
1. What instant messaging program that you are using?
2. were you able to make video calls before without any problem?
3. you will remember to do recent changes on the computer before this problem?
If you use Windows Live messenger, you can consult the following articles and check if that helps:
Impossible to establish a webcam with Windows Live Messenger conversation
Free chat: use instant messaging and webcam to stay in touch
With the help of your LifeCam with Microsoft Live Messenger
Hope this information is useful.
-
can you help me with the first and sounds home theater?
Hello
lynda tutorial, I bought, but I couldn't find a video to help me work with audio to create a home theater sounds
There is a simple diagram of a home theater
Well my question is linked to my timeline and audio
How can I have on my timeline audio that sounds on the left rail only, or left / right back together
y at - it a video tutorial?
or can you help me?
Thank you
You are looking at Video Mixer, you need the track mixer.
-
Satellite A200 PSAE3: Windows XP Home edition do not recognize the modem and sound card
Hi all!
I can't understand what is the problem with my Satellite A200 (PSAE3)... I downloaded all the files on the right of the Toshiba Download Center, updated the BIOS to WXP but XP still not find any sound card or any modem. He isn't finding a device with a "?" question mark on this...
There are so many different drives, I tried, but no one has changed the situation...
Anyone has any advice?Thanks in advance,
ciroopi
Well, I found the solution to the problem! :)
so, I write these verses down for anyone who might know the same problems:
as usual, strictly follow the 'Toshiba A200 Installation sequence' found on the TOshiba driver download page.
as he [I jumped no useful installation programs]I advice restart you each time you install a component, in order to have under control the whole Exchange.
1 Windows XP Service Pack2 (RTM) - of course ;) -.
[...]
DirectX V9.0c 5 (SP2)
Windows Media Player 10 V10.00.00.4036 6
[...]
10 Microsoft .NET Framework V1.1.4322 (SR1)
11 Sun Java 2 Runtime Environment V1.6.0
12 Intel ICH8M Chipset utility V8.2.0.1014
13 Intel VGA driver 6.14.10.4833 965GMNote that driver VGA, the ATI we too, was also a difficulty - in fact, I don't know what it would have done - for the AUDIO sound card.
You may have read in the installation dialog box.Moreover, I do not know if you must install the sun java, .NET framework and WMP version that displays the list, versions that are OLDER than the most recent, but just to be sure, download the form versions THAT NET.
at this point, you should see "unknown PCI device" in the unknown devices in the system control panel.
14 Realtek ALC268 Audio Driver V5.10.0.5433
for realtek, I suggest you download the driver from the zip from the realtek download page; Once extracted from the latest version for desktop or a temp directory, I suggest to install before all the patch KB888111 you might find in the \WDM_Rxxx\MSHDQFE.
then restart.
for now, you should not see the "unknown PCI device" no more where it was before, but under the "system devices", like her, where you could also end the "Intel PCI Express Root Port", "Pci Bus" and so on [ja? m saying this to you because ja? m Italian aid of XP, and I don't remember the exact English names...].
Now, install the audio drivers by using the setup.exe that you find in the \WDM_Rxxx directory.
It should reinstall the kbfix and install the new drivers.Reset.
After the reboot, nothing happens, but...
.. see the "unknown pci device" menu - here? m not sure the name but the one with the exclamation mark in the 'system devices' - select 'Properties' and then 'driver' and 'update driver'. Let XP find the NOT on the net. tell XP to look for "Video and Audio Controller, game" [you know, the English entry that usually stands for device audio and similar] and he must find a CORRESPONDING driver, which is the "MICROSOFT UAA BUS DRIVER for HIGH DEFINITION AUDIO".
If XP don't select this driver by itself, you should look for "\windows\system32\DRIVERS\hdaudbus.sys".After that, XP automatically detects ALL audio devices and install the correct drivers.
In addition, it now the entrance to the modem, modem to install the separate driver, that we could find in down in the "list system", like her, on the Toshiba download page.So, hope this helps!
See you soon,.
Francesco
-
I have a HP 15-r011dx laptop with windows 8.1 when on youtube or videos CNN, the speakers carack and pop. The ads CNN play before the story are very good as a DVD or my music loaded. I relly don't want to reinstall. I've had the computer for 3 weeks and I don't know if she was there from the beginning. I have updated all of HP, including the BIOS and tried another browser and adjusted the volume levels. Windows has made updates.
Hello
I have some other ideas, but it becomes more an environmental issue. Something (I couldn't say what) is causing interference with the audio. As this occurs only with online video/music and not anything ran computer laptop or DVD directly, this indicates that it would be something to do with the Internet.
There might be questions about Internet bad signals via wireless or bad connections to Web sites. You have problems with streaming?
You can also try to connect to your network with an Ethernet cable, to test. The question is perhaps more wireless streaming. Again, this could indicate some sort of interference.
You can also test your router with the nearby. If you notice the problem disappears in some places but is apparent or worse in others. Check to see what's around, other devices may cause the buzz.Have you noticed problems in streaming video and audio on other capable network devices (iPhone, Desktop, etc.).
The last possibility, again it goes back to poor/bad Internet could be the router itself. If it is older, then it might 'go. '
I know nothing of the above are direct troubleshooting suggestions for the laptop, but two doing exactly the same thing is very rare. More often then not it is and indication that "something else" happening. The idea and the tests above could help determine what exactly will.
I would like to know how it all happens.
Thank you. -
Problem with IPSEC tunnel between Cisco PIX and Cisco ASA
Hi all!
Have a strange problem with one of our tunnel ipsec for one of our customers, we can open the tunnel of the customers of the site, but not from our site, don't understand what's wrong, if it would be a configuration problem should can we not all up the tunnel.
On our side as initiator:
Jan 14 13:53:26 172.27.1.254% PIX-7-702208: ISAKMP Phase 1 Exchange started (local 1.1.1.1 (initiator), remote 2.2.2.2)
Jan 14 13:53:26 172.27.1.254% PIX-7-702210: Exchange of ISAKMP Phase 1 is complete (local 1.1.1.1 (initiator), remote 2.2.2.2)
Jan 14 13:53:26 172.27.1.254% 6-PIX-602202: ISAKMP connected session (local 1.1.1.1 (initiator), remote 2.2.2.2)
Jan 14 13:53:26 172.27.1.254% PIX-6-602201: Phase 1 ISAKMP Security Association created (local 1.1.1.1/500 (initiator), 2.2.2.2/500 remotely, authentication = pre-action, encryption = 3DES-CBC, hash = SHA, group = 2, life = 86400 s)
Jan 14 13:53:26 172.27.1.254% PIX-7-702209: ISAKMP Phase 2 Exchange started (local 1.1.1.1 (initiator), remote 2.2.2.2)
Jan 14 13:53:26 172.27.1.254% PIX-7-702201: ISAKMP Phase 1 delete received (local 1.1.1.1 (initiator), remote 2.2.2.2)
Jan 14 13:53:26 172.27.1.254% PIX-6-602203: ISAKMP disconnected session (local 1.1.1.1 (initiator), remote 2.2.2.2)
Jan 14 13:53:56 172.27.1.254% PIX-7-702303: sa_request, CBC (MSG key in English) = 1.1.1.1, dest = 2.2.2.2, src_proxy = 172.27.1.10/255.255.255.255/0/0 (type = 1), dest_proxy = 192.168.100.18/255.255.255.255/0/0 (type = 1), Protocol is ESP transform = lifedur hmac-sha-esp, esp-3des 28800 = s and 4608000 Ko, spi = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 4004
The site of the customer like an answering machine:
14 jan 11:58:23 172.27.1.254% PIX-7-702208: ISAKMP Phase 1 Exchange started (local 1.1.1.1 (answering machine), 2.2.2.2 remote)
14 jan 11:58:23 172.27.1.254% PIX-7-702210: Exchange of ISAKMP Phase 1 is complete (local 1.1.1.1 (answering machine), 2.2.2.2 remote)
14 jan 11:58:23 172.27.1.254% 6-PIX-602202: ISAKMP connected session (local 1.1.1.1 (answering machine), 2.2.2.2 remote)
14 jan 11:58:23 172.27.1.254% PIX-6-602201: Phase 1 ISAKMP Security Association created (local 1.1.1.1/500 (answering machine), distance 2.2.2.2/500, authentication = pre-action, encryption = 3DES-CBC, hash = MD5, group = 1, life = 86400 s)
14 jan 11:58:23 172.27.1.254% PIX-7-702209: ISAKMP Phase 2 Exchange started (local 1.1.1.1 (answering machine), 2.2.2.2 remote)
14 jan 11:58:23 172.27.1.254% PIX-6-602301: its created, (his) sa_dest = 2.2.2.2, sa_prot = 50, sa_spi = 0x9de820bd (2649235645) sa_trans = sa_conn_id of hmac-sha-esp, esp-3des = 116
14 jan 11:58:23 172.27.1.254% PIX-7-702211: Exchange of ISAKMP Phase 2 is complete (local 1.1.1.1 (answering machine), 2.2.2.2 remote)
Jan 14 12:28:54 172.27.1.254% PIX-6-602302: SA deletion, (his) sa_dest = 2.2.2.2, sa_prot = 50, sa_spi = 0x9de820bd (2649235645), sa_trans = esp-3desesp-sha-hmac, sa_conn_id = 116
Kind regards
Johan
From my experience when a tunnel is launched on one side, but it is not on the other hand, that the problem is with an inconsistency of the isakmp and ipsec policies, mainly as ipsec policies change sets and corresponding address with ASA platform when a tunnel is not a statically defined encryption card he sometimes use the dynamic tag to allocate this vpn connection. To check if this is the case go ahead and make a "crypto ipsec to show his" when the tunnel is active on both sides, see on the SAA if the corresponding tunnel is the static encryption card set or if it presents the dynamic encryption card.
I advise you to go to the settings on both sides and ensure that they are both in the opposite direction.
-
Problems with dynamic links between Premiere Pro and After Effects
Hello
dynamic binding (insertion of After Effects compositions on a Premiere Pro schedule) rarely worked properly since it was introduced. Problems vary (for example "media disconnected" made plates, old versions of comps rendered).
What's worse, is that you can never tell what will be ultimately made out of Premiere Pro. Thus, a typical professional workflow to several projects together to finish during the day and batch overnight rendering can cause a catastrophe.
Of course, the option is to not use dynamic link. Which makes then less competitive whole adobe.
This subject has been widely discussed for years has been a dynamic links. I'm not the only one having this problem, and the problem is far from new.
My only question is:
Adobe: have you ever fix dynamic links?
I don't really understand how you focus on software development in your company. The vast majority of the features of CC is little or not useful. The most important thing in a professional environment is consistent and reliable - performance can you please focus on that?
I'm inspired to write this post because I just arrived in my edit at 07:00 only to find that my night makes is the wrong versions. All bed very well in the body and AE, damage the final rendering off Media Encoder used an older version of one of my compositions, and that I have nothing to send to my client.
Janne
Title edited by Kevin Monahan.
Management of files Adobe seems to rely on the names and the last path of known files. Body loses links Dynamics (and other files) with frightening regularity in a situation where nothing has changed in the hierarchy of files, the files.
16, when a hard disk of 8 GB was a huge drive, Pro Tools has been littering files on several disks because, as was the creation of audio files in real time, she had to. Digidesign introduced into a system which incorporated a unique program generated number in each file. Since that day I have never had a problem with lost files or correlate. I can move them anywhere, on any system and any PT session concludes that they are with total reliability - and we are talking about a lot of projects with thousands of files, through several studios. If you are looking for files, you can choose to use the identification number, the name of the file, the length of the file, or any combination of these. Which allows for the substitution of file.
Until Adobe address this problem with a solution similar to that of Pro Tools, we'll be constantly beset by problems.
-
I can't watch DVDs on my computer breaks the image and the sound is distorted what I can do?
the image breaks into little squares and the sound is distorted
Hello
1. what application are using read DVD?
2. the issue confined to the DVD or have you a similar problem during playback of videos on the hard drive?
Please provide more information on the issue so that we can better help you.
In the meantime, try the troubleshooting provided in the link below steps to solve the problem.
How to troubleshoot problems that occur when you play a DVD in Windows XP
http://support.Microsoft.com/kb/308012
-
DB link between our client and the third party provider
There is a third party provider that has its own db containing information on supporting documents.
There is a link in db between db and db of third-party customer
Now for our client we create vouchers through the UI in our database that must be verified in third-party provider db and created in our database
How can achieve usWhy don't you create a view in your DB which is ' select * from
".
Maybe you are looking for
-
I need to complete the process to open firefox again and it's a pain in the asss.
-
Cannot complete the Installation of Snow Leopard on MBP 2009
Hello! just got a 2009 MBP, it ran very nice El Capitan, but I decided to downgrade to ensure best performance on older operating system. So I got this Snow Leopard DVD, everything was OK, then on the first boot, when you select the country/keyboard/
-
Pavilion 14-al015na: new HP laptop reboot without warning
I would like to start by saying that I am not savvy computer very waves and too complex answers will just go over my head. Honestly I do not know if I chose the right subforum for it (sorry if I don't!). Please try to put the answers in stupid people
-
HP laptop laptop 15-f004wm: upgrading question please help!
So can I switch the processor of this laptop for the i7 - 4790 k? If I can't do it without having to buy other parts could you please list the parts that I need? I also want to update the graphics card as well. Any suggestions? I want to be able to p
-
I want to know how to remve competely internet explore 10 of my computer my computer runs windows 7 This Explorer has caused slow and no way to what I was looking for Sometimes the back arrow does not work or it crashes