Version ESXi 5.1 and 4.1

Similar Questions

• VM Compatibility ESXi 5.1 and later bad (VM version 9) with the network

  I'm having and ESXi host with 10 VM, all connected to the same portgroup on the virtual switch. To allow THT, I created the last slots with 5.1 ESXi compatibility and later (VM version 9), where all the other machines have ESXi 4.x and later (VM 7).

  Now, I'm having the issue 2 machines with version 9 can talk to each other, and version 7 cannot talk to each other. It is not possible to make a ping to a version 7 virtual machine vm version 9 and vice versa.

  
  

  An idea, a re there known issues, something I did wrong? From what I saw that day was to be a major change in the networking between these versions.

  Any help welcomed verrrrrry!

  Thank you, Philippe

  
  

  
  

  OK, after spending a day debugging, convert machines front and rear, delete and remove the NETWORK card I was able to convince the administrator to restart the host ESX - problem solved!

• Three questions about the version of the hardware and VM tools

  Hello

  I have 3 questions about equipment and tools of VM version, can someone help? Thank you in advance.

  1. is the machine hardware version virtual file OVF/EGGS associated with?  OVF/EGGS exported vSphere files contain the virtual hardware version information?

  2. review I have a VM in vSphere 6.0 platform with version 11 of hardware and the latest Tools (cam with ESXi 6.0 U2) VM, I can export to an EGG file, then import it on vSphere 5.1 platform? If can, what version of the target material is VM?

  3. can you vmtools high version with lower vSphere platform? For example, I have a virtual machine with version 11 of material and tools the latest VM (ESXi 6 U2), later I move the 5.1 ESXi virtual computer, should I go down the vmware tools? Is there a compatibility issue?

  Hello

  1. Yes, if you unzip the eggs and open the FVO in an editor you see:

  Family of virtual hardware

  0

  VMX-08

  2. you can not. Vmware 11 material is not supported by 5.1.

  3 didn't cause you cannot import vmware 11 and 5.1. Works may be more high vmtools as long as you keep the material support for 5.1 version.

  

  Best regards

• ESXi 5.5 and RAID

  Good afternoon

  I recently bought a Cooler Master case and build a virtual server. The specifications are:

  CPU: Intel Core i7 3770 K @ 3.50 GHz

  Motherboard: ASUSTeK COMPUTER Inc. P8Z77-V (LGA1155)

  Hard drives: 3 to 2

  I chose to install the latest version of ESXi (5.5). The first question I had was the NIC not recognized. I could correct this problem by injecting an e1000 driver into the ISO using ESXi-Customizer.

  The next issue, that I met him, it's the software RAID I built out of my Asus motherboard is not recognized by the installer of ESXi. In the BIOS, I have:

  Version of the BIOS 2104

  Intel virtualization technology - enabled

  SATA - RAID mode

  3.6 TB RAID5 (condition: in good HEALTH)

  I spoke with Asus this morning and told me that everything was going well at their end. However, they said that they do not specifically support VMware products. He suggested that finding an Async driver to add to ISO. I can not find it and have found conflicting reports of whether or not this configuration is still supported.

  In short, my P8Z77-V RAID array can be seen by ESXi 5.5 and if so, how?

  Thank you

  Eric

  Software RAID controllers are not supported with ESXi.  If you plan on computer using a RAID system on board, you will need to install a hardware RAID controller.  Trademarks of Adaptec or LSI would be a good starting point.

• Vshphere Client 5.1 can't connect with esxi 5.0 and earlier

  Hello

  I am facing a strange behavior I me client Vsphere updated 5.1 but now it is impossible to connect with esxi 5.0 and older versions. When I try to connect to an earlier version of esxi it show me update popup but unfortunately on this machine I can't connect to the Internet ihave manually download a patch?

  Talha Correia

  Hello

  You must download and install the client on your computer.

  You can find in the download section of the website of VMware vSphere.

  It comes to 5.0

  https://my.VMware.com/Web/VMware/info/slug/datacenter_cloud_infrastructure/vmware_vsphere/5_0

  Francesco

• ESXi 5.1 and VMFS-3 data warehouses

  We have an existing environment to ESX 3.5 Update 5 7 host and an EMC CX3-10 x iSCSI SAN. We go to decomission 2 ESX hosts and replace them with hardware ESXi 5.1 and recent guests. We realize that we no longer able to manage these hosts ESXi from our Virtual Center 2.5 console, but these two hosts will run a minimum number of virtual machines (Exchange 2010 multirole) that don't use VMotion, DRS and HA.

  Our understanding is that ESX5.1 can see and use VMFS-3 data warehouses. Is it true that, once we plugged the new 5.1 ESXi hosts to our SAN and you can see all the existing LUN that we should be able to stop the virtual machines on two ESX 3.5 hosts and start the virtual machines on the host ESX 5.1 computers?

  Everyone has problems running ESXi 5.1 with VMFS-3 data warehouses?

  Some data warehouses VMFS-3 existing could be improved to VMFS-5 because they are only used by the virtual machines that work on 5.1 ESXi hosts. But some of the data warehouses VMFS-3 existing is not extensible because they are used by the virtual machines running on ESX 3.5 other hosts. In other words, a single virtual machine can have virtual drives running on the VMFS-3 and VMFS-5 warehouses of data at the same time?

  Thank you

  Jay

  VMFS version isn't a problem. What I am more concerned by the fact that your storage system is not supported by ESXi 5.1.

  André

• How to correctly record the ESXi 4.0 and vSphere Client for free?

  Hello everyone.

  Can someone help me with registration

  of free VMware ESXi 4.0? I am totally confused with the process I

  certainly do not understand.

  My goal is to install and use ESXi

  4.0 and manage via vSphere client with free licenses free of charge for

  more than 60 dayes. Is it possible?

  Installation of its products

  gone without problems, but failed to save. I found a few

  suggestion on other threads, but nothing helped. Give me a hand please,

  I will be grateful.

  I'll write what I did:

  1. I went to the http://www.vmware.com/products/esxi/ site.

  2. I read that I can get the free license for VMware ESXi 4 and VMware vSphere Client.

  3. Decided to download this software, registered and was redirected to
     the site where I could download iso 4 ESXi and vSphere Client .exe

  4. Installation and basic configuration of ESXi on the bare metal and vSphere Client Windows XP without problems.

  5. I am able to create virtual machines and use it - it's OK, but vSphere Client know that I have to the 60-day trial.

  6. Meanwhile I received the email with "Activate your VMware ESXi license".

  7. I have
     Click on the link in the e-mail and was redirected to the same
     the site, where I can download the software, but on the top of the web page I can
     find information and a 'ESXI licenses""this license key is valid.
     "for VMware ESXi 3.5 Update 2 and later versions. So I guess it's also valid
     for ESXI 4.0. I'm I right?

  8. I would like to record my ESXi 4 software installed and the vSphere Client. Of
     I chose the vSphere Client Menu: help - & gt; VMware on the web - & gt;
     Sign up for now. The site ask me "series/license number Activation".
     Code"so I typed the license key. Iassume that this license key should not be placed here, because the web site of replay that: "Code of Activation of series/license number has already been registered. So how do?

  As I wrote, I'm confused. How to correctly record the ESXi 4.0 and vSphere Client? What I did wrong and how to fix?

  To register the serial number in your ESX4i host

  Home-> inventory-> higher level (your ESXi host)

  Tab Configuration

  Left side - features licensed

  Edit-> Assign new key for this host-> Enter Key

  Paste your key

  Confirm all

  Your ESXi server is now fully licensed

  Note: you no longer have the basic features and all the enterprise features that came with a trial license are no longer valid

  Maish

  Architect of virtualization & Systems Administrator

  http://technodrone.blogspot.com

• Patching Embedded ESXi 3.5 and redundancy

  Hello

  I tried to find answers to theses in the documentation, but failed so far.

  I have a Dell 2950 PowerEdge server with ESXi 3.5 embedded.   I understand that I can be updated by using the tool VMware Infrastructure Update, installed on a physical server separate.  Where is the update applied? It is applied directly to the memory card Flash shipped?   When to apply?  If it fails, I can just re - apply the 3.5 version via the update tool?   Is there any built-in redundancy, so that if he does not validate successfully, I can just reboot and the old version of ESXi will still be on the map?

  If there are all the sections of ESXi documentation that refer to this, please let me know.

  Thank you very much!

  Brian

  Welcome to the VMware community forums.   If you mount the USB drive in another operating system, you will see these partitions

  Hypervisor0 - 4 MB

  Hypervisor1 - 47 MB

  Hypervisor2 - 47 MB

  Hypervisor3 - 500 MB (is mounted as /store

  H1 and H2 are where ESXi store its firmware.  H0 has SysLinux, which is the original boot loader.  It will be either boot ESXi of H1 or H2.  When you start with a fresh install, Syslinux will start ESXi of H1 and H2 will be empty.   H1 will be mounted by ESXi as /bootbank and H2 will be /altbootbank.

  When you patch your host, the firmware is written in /altbootbank and the H0 is changed to start from the H2.  The next time you start H2 becomes /bootbank, and H1 is /altbootbank.  When you patch it again reverses again.

  The good thing about this is that easily return you to the previous version.   Press SHIFTR on priming initial screen and you have the option to revert to the previous version, if the host has problems after the upgrade.  ESXi save a backup of your system in /bootbank/state.tgz (for the on-board version local.tgz) configuration.  If you use the SHIFT keyR after a month, any change in config, you made since then would be lost.

• I got the Beta version on my phone and now I HAV to change no update.

  I got the Beta version on my phone and now I HAV to change no update. Coz my phones says 10.0.1 and it is up to date. FYI, I deleted the profile end time. !

  < re-titled by host >

  Hello

  If it says 10.1 ios so it is like mine and up-to-date.

  See you soon

  Brian

• CCleaner shows a plugin in firefox without the name of the program or the Publisher and with a version number of '0', and it can be disabled or deleted.

  CCleaner shows a plugin in Firefox without the name of the program or the Publisher and with a version number of '0', and it can be disabled or deleted. It is a plugin for Firefox by default, and if so, what do I do? It does not appear in my list of Firefox addons in Firefox and a malware scan does not detect.

  It is possible that the profile has become corrupted, and you can try to start a new profile.

  • Use the Profile Manager to create and delete profiles Firefox

• Update of Firefox version make my settings and preferences reset themselves or they stay the same

  I wanted to know if when I update or the firefox browser is automatically updated to the latest version so my settings and browser preferences etc. that I made for the firefox browser change or reset themselves by default because I do not wish that they be as it is and would be a nuisance if I keep things from setting back again and again when the browser is updated to the version newer and newer so tell please me it doesn't, thank you.

  No, Firefox respect your preferences when you update. You should always have the value Firefox automatically updated, like this you keep most secure and the latest version. All your personal data and settings are safe.

• What happened to version 7.7.5 and 7.7.6 7.7.4?

  AirPort utility just reported that there is an update version 7.7.7 for my time capsule.  Currently I'm running version 7.7.3 and haven't seen anything like that on 7.7.4, 7.7.5 and 7.7.6 versions.  Apple blew some?  Someone has the release notes to find the missing 3 versions?

  There is no 7.7.4, of 5 or 6.

  I have no idea of what Apple had to go from 7.7.3 7.7.7 but there very of Boeing to her sound.

  Firmware for earlier models happen to 7.6.4 to 7.6.7... also a familiar Boeing.

  At least they are able to be downgraded.

  

  

• I installed the version 9.0.1 v10 Firefox has crashed maybe 20 times since then. The previous version almost never crashed AND it changed as if by magic of my network connection settings.

  I installed the version 9.0.1 v10 Firefox has crashed maybe 20 times since then. The previous version almost never crashed AND it changed as if by magic of my network connection settings. disable/change actually my DHCP
  -J' I disable all my Add-ons and rebooted w/no probs but it's crazy.

  I found a FF v9 online and install it. So far it works. I'll pass on challenging FF v10

• Just installed the latest version 9.0.1 and told me that I am not on the latest version

  I just installed the latest version of fire fox and tells me when I return to the home page that I am not on the latest version. I save the version in my downloads first, and then I ran it.

  If you use the www.google.com/firefox as homepage site that previous versions of Firefox 3 use as homepage you can ignore the message about not using the latest version of Firefox on this page.
  
  Google seems to keep this page.

  Google assumes that you are using an older version of Firefox if you still visit this site, and warns you that you are using an older version of Firefox and invites you to update.
  
  You can ignore this message if you are running the latest version of Firefox, as shown in the window "help > About" (Firefox is updated).
  
  You can use a different page than the homepage as subject: House or www.google.com or www.google.com/ig (iGoogle).

• Is there a cell music on the latest version of the iPod and if so where?

  Is there a cell music on the latest version of the iPod and if so where?

  Don't know what the 'cell' music is...  If you mean music that is streamed through an Internet connection, the only iPod with an Internet connection iPod touch  iPod shuffle and iPod nano do not have an Internet connection.