Version of the software update for blackBerry Smartphones

Similar Questions

• Software update for blackBerry Smartphones

  I have a Bold 9700 and tried to update the software etc. today and got 361 tasks out of 399 by using the update, when an error message came saying there was a problem with the internet?

  He was not, everything worked very well using the normal browser, so no one knows what went wrong.

  I turn off the anti-virus half way thro'.

  Thank you in anticipation

  Do your updates in this way, not through the upgrade of the Desktop Manager:

  See the link below for download and simple installation instructions.

  First find your operator and the system operating file that you want to use.
  http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  Make a backup of your device first, using Desktop Manager > backup. Close the office at the end Manager.

  1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.
  2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
  3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

• Error 1904 - cannot install the Software Desktop for blackBerry Smartphones

  I also had similar problems I've read on previous posts. I have four boxes of different error that arises when you try to install the software. I tried everything that was recommended at the previous posters, nothing helps.  Becoming very frustrated. I have a blackberry 8330 and windows xp. All reference failure to check of the diff dll errors. Any other suggestions?

  You may think using DTM WITHOUT Media Manager. Use the procedures to uninstall/install sdgardne, but download DTM without Media Manager.  Once done,

  Go to options-support card on your BB
  The settings should be:

  Media card support: on
  Encryption mode: no
  Mass storage Mode support: on
  Auto enable mass storage Mode when connected: Yes

  Once activated, when you connect your BB via the usb port, a windows Explorer will open and show your device as another drive on your pc. Then, you can simply drag-and - drop your photos, videos, music, documents between your pc and the BB.

• Software update for Blackberry Smartphones blackBerry - PC crashed

  All that remains of my 8900 is the nasty error messages.  The first such message, once the battery is reinstalled (no keys work) is: "Eception exception: ApplicationRegistry.waitFor (0xf405d42294c6940e) timeout ' through a 'OK' highlighted under.  When you confirm "OK", it rises "Eception exception: jave.lang.Error" with an "OK" highlighted under.  When you confirm "OK", the same as the first "Eception exception" error except with the number "(0x91fd388c7b9ff028).  This time, the 'OK' reveals the first "Eception exception" with ther same number than the first.  After 'OK' ing this one, all the errors disappear, and a black letter on a white background is a list of applications... Address book, calendar, new message, etc.  Selecting one of these and depressing the wheel gets another error message, specific request... all begin with 'Error starting net_rim_bb', followed by reference specific application and that the 'OK' button again.  Based on the ' just OK button gets back you to the list of applications... and so the circle continues until the battery again.»

  The unit will not be extinguished except by removing the battery and always powers until the condition that I describe.

  Any suggestions to get me back to where I was before this unfortunate... without losing data, multimedia, accident etc.?

  Kim

  MIKIM writes:

  All that remains of my 8900 is the nasty error messages.  The first such message, once the battery is reinstalled (no keys work) is: "Eception exception: ApplicationRegistry.waitFor (0xf405d42294c6940e) timeout ' through a 'OK' highlighted under.  When you confirm "OK", it rises "Eception exception: jave.lang.Error" with an "OK" highlighted under.  When you confirm "OK", the same as the first "Eception exception" error except with the number "(0x91fd388c7b9ff028).  This time, the 'OK' reveals the first "Eception exception" with ther same number than the first.  After 'OK' ing this one, all the errors disappear, and a black letter on a white background is a list of applications... Address book, calendar, new message, etc.  Selecting one of these and depressing the wheel gets another error message, specific request... all begin with 'Error starting net_rim_bb', followed by reference specific application and that the 'OK' button again.  Based on the ' just OK button gets back you to the list of applications... and so the circle continues until the battery again.»

  The unit will not be extinguished except by removing the battery and always powers until the condition that I describe.

  Any suggestions to get me back to where I was before this unfortunate... without losing data, multimedia, accident etc.?

  Kim

  Hi and welcome to the forums!

  If your PC has crashed in the middle of the update of the device OS is that correct?

  If the PC is stable just redo the upgrade, the OS device on your phone is damaged.

  If you have a recent full backup, you can restore it and not lose any data.

  If you have not made a backup, I fear that your data has been lost. You can top up your calendar and

  contacts, memo and tasks from Outlook.

  Thank you

  Bifocals

• can you have a version of CS and several version of the software installed for example Lightroom CC both?

  can you have a version of CS and several version of the software installed for example Lightroom CC both?

  Yes, you can have multiple versions installed.

  Please see this link:

  Download previous versions of Adobe Creative applications-

  Download previous versions of Cloud Creative applications

  You can have both CC and CS6 installed through creative cloud. You can also leave the old purchased software installed.

• Update removes himself from the software update for Photosmart 3210 (Snow Lepoard)

  Hi-

  So I recently installed the full software for my HP Photosmart 3210 for my mac which is under Snow Leopard. However each time I run the software update / sometimes it automatically prompts for installation:

  Drivers HP Update V2.3 size: 4.8 MB

  I always choose to install it but for some reason it doesn't seem to withdraw from the automatic update. Either I think its not install or not really sure. I checked the version number on the HP Installation Wizard on my computer, I installed a this is version 2.3.15. I don't really know what to do.

  Any ideas?

  Thank you!

  Do you really need it?  Snow Leopard has print and scan drivers built into the OS, so the HP software is not necessary.

  To uninstall completely that it:

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Now run a software update.

  Then, remove and reinstall the printer in System Preferences, Print & Fax.

  Scan from preview or Capture of Image apps. Scan from the front panel of the printer does not work yet.

• Software updates for blackBerry 10 to Singapore for Z10

  the model number of my z10 is STL100-1 and the version of the software is 10.0.10.82. I tried to update my software via the wireless, BB link and Web site, but I searched updates each time. It's showing that I have the latest version of the software. I am so disappointed especially when I am informed in Singtel that they released the software since May 22. What is the problem with my phone? Why is - that it does not work on the software updates? Can someone shed some light on this?

  Hello

  I solved my problem here in Singapore. The question really in the model of the z10. I bought this phone in Dubai, what makes STL001-1 model. Z10 Singapore STL001-2 a model that's why version 10.1 of singtel out STL001-2. This is the reason why I can not get the updates that my model and does not correspond with the versions of released Singtel. What I've done is insert any sim that belongs to STL001-1 as the Philippines, Malaysia, UAE UNITED etc.. It's the only time I got the bundle 10.1 and update it last night. I'm happy with it that I can now use Skype in my lover's communication.

  Hope I can help other people who have difficulties also updated unit.

• Software updates of blackBerry Smartphones

  My BlackBerry 9930 cannot send request for available updates via the wireless network

  EmmanuelSmith911 wrote:
  I tried and nothing has changed,

  Hmmm... Sorry to sound as I do not understand, but well I don't. Does this mean that the steps, has worked exactly as described, but do not resolve the symptoms you have described initially? Alternatively, the steps even not worked exactly as described?

  EmmanuelSmith911 wrote:
  I'm starting to think that this could be the it policy which could cause this problem. How can I remove the it policy?

  It is possible. But if you stay on BES, you cannot remove the it policy... you have to work with your BES admins to solve the problem.

  If you are not on BES, you must first check if you have a latent policy on board:

  • Article ID: KB30076 How to check for an it on a BlackBerry smartphone policy

  If you have one, then this is the only method to remove:

  • Article ID: KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings

  Beware you warnings... it's completely destructive to everything you have on your device now, then you must know how to recover from that after the withdrawal of the policy. If you choose to use the backup/restore as your method of recovery, so make sure you do selective and not wholesale... If you restore databases who say company policy or something similar, then you just put it on your device policy, and be right back where you started.

  Good luck!

• Using software update to blackBerry Smartphones.

  I had planned an update last night to demand for 2300 hour British. When I woke up, I found my phone was off and the charger was out of my phone. When you turn on again my phone, he immediately started backup software, which was going well until he started the social RSS update. Due to the fact he did not pay all night, it was not connected to a sense of network, it appears 'Social Feeds 0% '. Unfortunately, I can't leave this screen and so it tried to save social stream without connection for the last 6 hours.

  Thank you

  Tom

  Hello and welcome to the community!

  First - reduce the size of the font in your messages... the effect is the same as if you had used ALL capital LETTERS, for which this article could be useful:

  • http://kathrynvercillo.HubPages.com/hub/what-people-think-when-you-type-in-all-caps

  Now to your problem...

  (Credit JSanders)

  There are two methods for recovering for you to try:

  One:

  • Open Blackberry Desktop Software & connect your device with the PC using the USB cable, without inserting the battery.
  • You have three Retry option, update or cancel, and then click Update.
  • Once it is at the stage of the "initialization of pocket" update, then insert the batteries.
  • If this does not work, and you get stuck on the safeguarding of social data feeds, go to the second method below.

  Second:

  • Start your BlackBerry in safe mode.  Article ID: KB17877 how to start a mode BlackBerry smartphone without failurehttp://www.blackberry.com/btsc/KB17877
  • Connect to the BlackBerry Desktop Software and allow handheld to connect. If you are prompted to update, cancel the upgrade for later.
  • IF you can not connect or your desktop software does not recognize your device in Mode safe, please follow the instructions here to force detection: Article ID: KB10144 how to force detect the BlackBerry smartphone using the Application Loader
  • Go to device > delete > SELECT DATA > select this option to remove the Social flow and smart card data bases and follow the rest invites you to complete.
  • Now, you can go back and click to update the device through the Desktop Manager, or restart the BlackBerry in normal mode and continue on the upgrade of the air.

• Locks of software upgrade for blackBerry Smartphones

  I had problems with my touch screen not working not.  After searching online it was suggested that the software might require the upgrade so I downloaded it.

  Now, my phone got lock up to 16% of the backup is complete.  I can't at this point that every time I turn the phone on it get to the same point and stop.  The battery hold a charge then over heating and I have to turn off the phone and remove the battery.

  Now, I get very frustrated that I cannot do anything with my phone!  Help, please!

  Hello and welcome to the community!

  I recommend that you try to start safe mode:

  • KB17877 How to start a smartphone BlackBerry in Mode safe

  It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

  If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

  But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  Good luck and let us know!

• New update for blackBerry Smartphones

  An e-mail received this evening that there is an update available for my phone...    Verizon 8330.  When I went to the site of Blackberry and check updates with apploader it says that I'm running the latest version of the OS 4.5.0.138, for my curve.  Anyone else get this email with different results or now that this update is subject?  I was hoping it was the long-awaited updgrade and rumor of OS 5 for the curve.

  Hello!

  RIM does not release updates to end-users... businesses to do. Therefore, rather than checking a RIM Web site, you must control a VZW website. You can find it via this Portal:

  • http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  Good luck and let us know!

• Compatibility of the operating system for blackBerry Smartphones

  Hello. I'm new so I hope someone will direct me in the right direction for an answer I have (so far) could not find the question.

  Can I upgrade to 10 OS on a Blackberry Bold 9900 (running on v7.1.0.714)?

  As I say, I guess that the answer is NO, and I've just missed finding the information (I'm not good looking!)

  I ask because my mobile (mobile BT - UK) provider said I cannot get or send emails (or even connect to the Blackberry server to change the settings) unless my phone works on OS 10.

  Thank you in advance.

  No, you can't move a 9900 to OS10. I'm sorry.

• Error trying to open the audio file for blackBerry Smartphones

  I installed an app from the bb appl world, it contains audio files to listen to. When I try to open the audio file, it gives me the following error: IOException: java.io.IOException: HTTP response code: 302

  Any suggestions?

  Hi bonaqua!

  I will delete the SermonsAudio.com app tonight. I have not found all the files that were not supported by Blackberry. The attached link shows that taken Blackberry supported formats and media types.

  Thank you

  Bifocals

  Supported Media Types on the BlackBerry Smartphones reference Guide

• Cannot remove the shortcut from the App World for blackBerry Smartphones

  I have a Blackberry Curve 8330 and install Blackberry App World yesterday. I decided to remove it, so I went to the Options > Advanced Options > Applications, highlighted and selected delete. Then I rebooted my Blackberry as he asked, saying that the app would disappear. The app has been removed from my list of requests under the Options menu, but again, the shortcut is displayed on my desk and takes me to the screen "Download App World" when I click on it.

  I can't figure out how to remove the shortcut because it is more listed in my applications. What I just hide or y at - there a way to remove it? Any ideas?

  Thanks in advance!

  What is left is just a shortcut to the installation link for AppWorld.

  Just hide it

• Firmware update for blackBerry Smartphones

  Because of the usual problems of MMS with Blackberry 8100, I suggested updating the firmware with the version 4.2.1.101. I found another version, I think it's a newer version, the 4.5.0.55.

  I need to know:

  1 should I try and install the 4.5.0.55 or maybe it's not correct for my phone or not solve my problems with the reception/sending MMS (which, at the present time, is impossible)?

  2 - is enough to make a backup with Desktop Manager - in case I have problems with the new version and want to return to the older? What are the backupped of data, the current firmware and all my personal data - contact, activities etc., or only one of these options?

  Thank you very much to all the world, I'm really in trouble - need to MMS for work and my impossible to subscribe internet provider plan!

  It could be a limitation with the device, not the SIM card.  I use a BlackBerry Sprint device, and I can't send and receive MMS messages.  However, if I had to switch my number on a regular cell phone, then I could send and receive MMS.  I just guess that it might be the same problem you are having.  Which carriers do you use?

  You can not save the previous firmware, only the data on your device (which again, is always a good thing).  When you connect your BB to your PC, start the Desktop Manager to the top and click on the Save icon.

  If you want to have a copy of the firmware that you have now, in case you want to downgrade to it, you will need to check on your carrier's Web site, or Google search perhaps.

  If you have the old and the new firmware (not just downloaded, but installed) on your PC, you will be prompted to update your device when you connect it to the PC.  To downgrade, just uninstall the new firmware via Add/Remove programs and connect the device again - you will be prompted to downgrade.