versions of the API offline

Similar Questions

• Are there versions of the documentation of the API offline?

  As Adobe ASDoc, which can be downloaded and read offline. I have internet based volume and I would like to be able to read the documentation without having to connect to the same over and over again on different sessions page.

  It is an old desire. Cascades API doc is not available offline. Sorry

• How dynamically invoke or avoid the API methods depending on the Version of the API?

  Searched but could not find guides on this...

  I have a JDK 4.6 App, which itself pretties by using the () calls Field.setBackground and BackgroundFactory.Since that they require a minimum of JDK 4.6 it don't works on JDK 4.6 or better devices.

  It is just appearance, the rest of the application requires JDK 4.1. Is anyway I can avoid loading classes and 4.6 calls if the environment is< jdk="">

  I would use reflection except that is is not compatible with the Blackberry. I really want to avoid the separate binary files.

  Thanks - Lindsay

  I tried the preprocessor directives.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=8277

• Support of the API version on BlackBerry

  Hey there everyone,

  I am trying to determine what version of the API is supported by a specific device. Where is the best place to find this information? Is there a standard list of device = API Version or is this dependent on the operating system and the last update?

  Thank you in advance,

  Schalk

  Check this thread.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&thread.ID=13264&view=by_date...

• Selection of Blackberry Version of the JDK for a Business Application

  I currently have the intention to develop the first Java based on the request of our managers in my company, so I asked

  our team of Directors of Blackberry to give some information to our BES and compiled that

  information of a PivotTable. Should I choose the JDK version 4.2.0? What is your opinion?

  Any help is appreciated.

  hhessel

  The Table looks like this:

  

  

  There is a simple rule.

  JDE version is equal to the version of the API of the RIM which is equal to the version of the device software.

  If you are using JDE 4.2.0 application will work (should work) for all devices with the software version of the device equal or superior to 4.2.0

  But this app will not work on devices with software older than 4.2.0 device for example 4.1.0

  JDE 4.2.0 is a good choice, unless the Director-general has a device with os 4.1.0

• How to get the version of the vcloud director in the Java development kit

  Hello

  I'm trying to get the version of the vcloud director of IPY. I am currently using

  customer. Login ("administrator@System", "dangerous", client.getSupportedVersions () .get ("1.0"));

  to get the version... but I want to get the version of the VCD not the version of the api... I use the VCD 1.5 and 1.0, so according to the investigation period, I need to go get the VCD version.

  Thank you

  Kiran

  Hi Kiran,

  The object that is returned when GET-ting/api/admin contains a element indicating the version of vCD. It is available in both API 1.0 and 1.5.

  Because I'm not very up-to-date with software development kits, someone familiar with the Java SDK can direct you to the class concerned representing this API call.

  Kind regards

  Todor

• Version of the VC Server

  Noob question here sorry. However, I'm a bit confused. We have a VC to vSphere controlling the ESX 4 hosts. On our server, we have the API 4 (vSphere SDK Perl) code. I wrote a code (using the vSphere SDK Perl) to resize the disk of a virtual computer, which requires the code API 4. However, it turns out that the old 2.5 code is used. In VICommon.pm, I see that the query_server_version method to connect to the WSDL of the Victoria Cross to determine what version of the code should be executed. Of course, in my case, the wsdl file is revealing the code to use version 2.5 instead of version 4. I loaded the wsdl (https://our_hostname/sdk/vimService.wsdl) file and checked that it is to manually specify the version 2.5 (targetNamespace = "urn: vim25Service"). Before, I thought that VSphere VC would use the API version 4 code. Clearly, I'm wrong about this. So I would like to know exactly what I need to be updated on the VC (or anywhere else, besides) to start using the new code of the API on the virtual circuit. I clearly have a good understanding of how all the different pieces fit together, so if someone could tell me what I should do to get the Victoria Cross during the performance of the new code of the API, that would be most appreciated.

  A person of VMware can correct me if I'm wrong, but there is not actually a namespace vim4 , later still would be in the namespace vim25 , I'm not sure the reason, but I remember a few threads around that. It will automatically understand and choose the right version, based on what you are connecting to, as long as you have the libraries loaded, this is more important when you work directly with the Web Services SDK and not so much with vSphere SDK for Perl.

  If you write a script in Perl, you just check the API reference and somewhere in your code to check the version of the api to make sure that you are compatible between previous VI3.5 and vSphere 4.0, if that is the intention.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Why is it when even the version of Skype on laptop that runs Windows 7 same version on pc even if windows vista-why it is in the video offline Office call is green enabled but not laptop

  I have instaleed version 2003-2012 skype6.0.0.126

  laptop is a 64-bit windows

  Desktop is 32-bit windows

  any offline contacts on my office have active green video call. It's the same contacts in the laptop and the same status offline. But the video call in Skype to laptop is dark and inactive.

  I also tried to install the most recent version in the laptop and it's same thing

  Any solution please

  Hello

  Check out these articles and communicate with Skype:

  http://community.Skype.com/T5/Windows-desktop-client/two-versions-on-one-PC/TD-p/397459

  Contact

  http://community.Skype.com/T5/Skype-for-computer/CT-p/computer

• Version of the C API for LabVIEW FPGA 2011

  What is the version of the C API that will work with LabVIEW FPGA 2011?

  I guess as this one: http://www.ni.com/download/fpga-interface-c-api-2.0/2616/en/

  Version numbers seem to start by 2012 years.  It's the latest version I could find before 2012 and he was released in August 2011.  This time coincides with the annual festivities of the NOR week where a large part of the software/hardware is released.  It's a small download, so it shouldn't be difficult to download it and try it.

  But, you'll still need LabVIEW FPGA development according to this white paper: http://www.ni.com/white-paper/9036/en/

• Hi, I, m need Adobe Photoshop CC 2015 offline trial version Installer. Please help me. How to download the version from the adobe web site offline?

  Hi, I, m need Adobe Photoshop CC 2015 offline trial version Installer. Please help me. How to download the version from the adobe web site offline?

  First read the important instructions on this page.

• How to go from 'Offline' to 'online' in the Version of the Client?

  I use UPK 3.6.1 version of the Client. Sometimes I run the PUK when I'm not on the corporate network, I am 'offline' (the status is displayed in the lower right). Then, I realize I need to check out a document and I would get on the VPN, but I can never understand how to move to 'online' PUK constantly and he raises.
  
  Is it possible to have a 'Disconnected' to 'online' without having to close PUK?
  
  Thank you.

  Hello

  When I VPN back in and it reads still disconnected, mine usually goes online automatically after a few seconds. However, when he n - t I either double-click the icon in the lower right where it says disconnected or I'll by going to the file offline work offline entry and immediately turn off again. Have you tried? From offline offline then if all goes well online.

  Sorry nothing more useful. Good luck!

• Updated to 39.0 curser now do not show marker titles in the API Google maps unlike the previous version, what has changed?

  If you open this link http://edwardfrey.com/map/2015.html a map with markers. When my cursor hovers over the mark a title appears. If you click on the marker of a pop up will show newspaper when you click will opens a page of newspaper on the date indicated in the pop - and there will be a map included in Scripture upwards to this day here.

  The roadmap also has markers with titles. Before 39.0 I could hover and see the title, now I can't. When I move the pointer to the marker cursor turns into a hand, in the previous 2015 map the cursor turns to a pointing finger.

  Example: Click on the marker - 0 - then log. This web page http://edwardfrey.com/peregrinating/period61.html#11
  December 11, 2015 with a map showing the three markers that all have the title but I can't see them.

  I fixed my problem FireFox 39.0 title of marker. I started using Internet Explorer 11 for all of my web site work and evidence/change what I did. About a third of the visits to my site, use FireFox although I don't know how use the 39.0 version. The problem of the title existed before it got worse and there are probably few of these FireFox users each glance at my cards yet less hover over the marker to see the title. Problem solved!

• «the server offline...» "and he did not. and I can not connect

  I had no problem with thunderbird, but since yesterday, I am not able to receive emails, check e-mail or copy them to the folder send... I have a mac with version 10.8.5

  error message «the server offline...» »

  I can't find help anywhere. my settings in my account fine r, my mail server works...

  help me help me help me

  I don't want to uninstall and reinstall, but if this can help I'll do it

  k

  OK, this is how I solved my problem

  go here and follow the instructions to save your profile http://www.maclife.com/article/howtos/how_back_and_restore_mail_thunderbird_6

  Then, open thunderbird and remove your account, and then add the new account.

  now, it should work... profile backup is just in case things get

  I hope it will work for everyone with this problem... I think the last live update my account settings and I didn't know where

  Good luck

  k

• iTunes game question... If I downloaded versions of upgrade no DRM from songs matched on my hard drive and then cancel iTunes game, I'll still be able to play the upgraded version of the downloaded files then?

  Hello

  I signed up for iTunes game several weeks ago mainly to unprotected quality 256 kbps versions of songs that I bought before 2008 (when iTunes send 256 Kbps files instead of 128 Kbps of lower quality files).  When I did, about half of these old songs I had bought are accompanied by a status of 'Bought' iCloud and the rest were listed with a status of "Matched".  I was puzzled by this because it seemed to me that thought iTunes doesn't recognize no I bought have these songs.

  Finally, I have determined that the reason iTunes game didn't recognize them as bought because these 'Matched' files were bought during my AppleID had a different e-mail that are associated with account.  It's the same AppleID account, but another email.  I also found that I could still upgrade files Matched from 128 Kbps to 256 Kbps.  I also have available files of the song offline upgrade, which of course them on my hard drive.

  Because I signed up to get the files updated level, I will finally be cancelling the iTunes account Match.  Now, as many of these songs are listed as matched and not purchased, I wonder what will happen when I cancel iTunes game.  Still, I'll be able to play the downloaded files, sync with my iPhone, etc. after that game is cancelled?  In addition, there are a few songs that were purchased in the framework AppleID to my wife that currently are as well matched, and I am allowed to read files purchased with his account. I want to upgrade these files and download them as well.  When I canceled the game, will I still be able to play the improved version of his songs?

  Thanks for any information you can provide. :-)

  Hello

  Once you have downloaded the upgraded pieces, you will keep them. PS Keep another upward.

  Purchased in General securities are purchased but some will come, probably because an upgrade of the original is not possible for example that the version of the album is no longer available.

  The purchased prevoiuly of the corresponding securities does not appear under previous purchases. Also, be aware that if you need to redownload past purchases, you get the original version of the DRM 128 no upgrade.

  Jim

• Call Java DAQmx.dll: Y at - it a new version of the DAQmx.dll NET c# for CLR 4.0 library

  I need to use the API of NET c# in a java program, so I tried to use Jni4net library to fill the dll in Java. I get errors however, because the version of daqmx.dll that I have been built against CLR 2.0.50727. Is there a version of the dll for CLR 4.0 (corresponding to .NET 4.0 or higher)?

  If someone know another way to call the java daqmx.dll?

  Hello

  I eventually found the version I had to work.

  I have the DAQmx.dll assembly. I got an old software project developed for the device, I'm working on that. I guess that the original developer obtained from the disk of National Instruments.

  Thank you