versions of Toolbox

Similar Questions

• CVI2010 10.0.1:Combination ListPrealocate, ListCompact and ListDispose cause error

  Hello

  I rebuild od project of CVI7.1.1 in new CVI 2010 10.0.1 and when run I get the error "NO FATAL RUN - TIME ERROR:...". Attempt to free the pointer to the memory not allocated by malloc() and calloc(). "the line source with function call ListDispose (list);

  After some research, I found that it is under ListPrealocate and ListCompact.

  It is a simple example of code:

  ListType list=ListCreate(sizeof(int));
  ListPreAllocate(list,1);
  ListCompact(list);
  ListDispose(list);//runtime error at this line//i also get error when i try call InsertItem after ListCompact
  

  form toolbox.c it seems to me that the problem lies in listCompact free memory but do not update the struct pointer.

  I would like to have the official patch for this "bug" don't have no not my own version of toolbox.c (because of updated poslible to day of the CVI) as well as for other users who can benefit.

  Hi OVR_CZ,

  Thank you for that bring to our attention. I checked that it is a bug in toolbox.c. I submitted a bug report (#335805 track) and it should be resolved in the next version of the CVI.

  Since we provide the source code for toolbox.c, you can actually make the change in your copy of yourself. In the ListCompact function in toolbox.c, just change the if statement at the bottom of the function as follows:

  void CVIFUNC ListCompact (ListType list)
  {
      unsigned int tracking;
      void *newPtr = 0;
  
  #ifndef TB_NO_SAFETY_CHECKS
      if (!VALIDATE_LIST (list))
          return;
  #endif
      list = LIST_GET_POINTER (list);
  
      if (list->listSize == list->numItems)
          return;
  
  #if defined(_NI_mswin_) && _NI_mswin_
      tracking = SetEnableResourceTracking (0);
  #endif
      newPtr = realloc(list->itemList, list->numItems * list->itemSize);
  #if defined(_NI_mswin_) && _NI_mswin_
      SetEnableResourceTracking (tracking);
  #endif
      if (newPtr || list->numItems == 0) {
          list->itemList = newPtr;
          list->listSize = list->numItems;
      }
  }
  

  Note: This may or may not be change us really do for the next version of the CVI.

• Lenovo thinkvantage Toolbox Version 6.0.5692.08

  Hello

  Can someone tell me where I can

  D download Lenovo thinkvantage Toolbox Version 6.0.5692.08 for Windows 7 64-bit.

  Thank you

  Dear Alaa Al-Allan,

  The complete installation programs were just posted the lenovo.com:

  32 bit
  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-73783

  64 bit
  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-73784

• How to restore the previous download UI Toolbox in FF26?

  Updated to FF26 earlier today. Earlier, I noticed that the Download Manager is different, it is rather the new version which is available for some time. I've been using the older Toolbox that was available in previous versions through everything: configuration and activation of the option of the Toolbox. This option is always checked as true, but the Toolbox is the same (most recent version).

  How can I go back to the older download Toolbox without restoring a previous version?

  Related bugs:

  • Bug 948964 - "browser.download.useToolkitUI" no longer works after update to FF 26
  • Bug 928349 - add a configuration to use the JavaScript API for the time of the generation downloads only and enable it in Firefox for desktop PC
  • Bug 899110 - remove the code to switch between different servers of the downloads Panel

  Please, do not comment in the bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html

• Where can I download the software of HP Toolbox FX for a HP LserJet M2727nf? I need to reinstall it.

  I've looked everywhere in the HP site, nothing helps.  The software must be reinstalled.  I am running Windows 7.  This isn't a question of the communication being lost - I tried the solution of J Affable files Delete to restore communication, but this is an other issue/error message.

  Well, I have good news for all a search for an update for HP Toolbox FX for Windows 7.  It is (finally) available. You can download it from the website using this link: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 18972 & prodSeriesId = 3377075 & prodNameId = 3377076 & swEnvOID = 4062 & swLang = 8 & mode = 2 & taskId = 135 & swItem = ma-81619-1

  The complete solution includes the version/updated driver for HP Toolbox FX.

  It solved my problem: I scan the image.  Yay!

• Driver or Toolbox component missing daqmx.rc

  I'm trying to open a VI works fine on another PC.  At the end of loading, pop ups window "Load and Save WARNING list":

  Type of warning - missing driver or component Toolbox

  Details - C:\Program NIUninstaller Instruments\LabVIEW 2011\vi.lib\DAQmx\create\channels.lib\DAQmx Create Channel (CO-Generation-the pulse frequency) .vi (DAQmx create channel (Co-generation - the pulse frequency) .vi) this VI is in need of a driver or Toolbox component which is not found.  Missing file of the resource 'daqmx.rc '.

  -----------

  The file daqmx.rc exists to

  C:\Program NIUninstaller Instruments\LabVIEW 2011\resource\objmgr

  I took the following measures:

  1. uninstall all previous versions of LabVIEW, LabVIEW 2011 to leave.

  2. has tried to run a repair on LabVIEW 2011 - who do not recognize the DVD provided by the plant as a source of distribution.

  3. uninstalled and reinstalled DAQmx 9.3.4

  No generation of pulses being applied anywhere in the VI of interest, can I safely ignore this warning?

  What, exactly, the warning means?  The mentioned file is, of course, where it should be.

  Any help would be appreciated.

  Hi mistercat,

  It seems that this is due to a problem during the installation (it may sometimes arise when things are not installed in the correct order). I would recommend uninstalling DAQmx and LabVIEW 2011, reinstall LabVIEW for your DVD distribution and then by installing latest DAQmx 9.4 (the latest version). I'm a little worried that the repair is not recognizing your factory DVD as a source of distribution... You have another computer to try to make sure that nothing has changed for the discs?

  Let me know if it helps.

  Best,

• How to install the 32-bit version and the 64-bit version of lab VIEW 2014 SP1 in the same machine?

  I want to have both versions because my pc is 64-bit, but he can't function with

  Module LabVIEW Control Design and Simulation

  and

  LabVIEW MathScript RT module

  This funtion two apps with 32-bit lab VIEW 2014SP1

  also, in the forum, I see that it may be possible, check on question number 6

  "Q: I have 32-bit LabVIEW and LabVIEW 64 bit installed on the same 64-bit machine? ."
  A. Yes. »

  http://digital.NI.com/public.nsf/allkb/71E9408E6DEAD76C8625760B006B6F98

  Help, please

  I suspect that most of the facilities of LabVIEW on Windows consists of LabVIEW 32 bit running on an operating system 64-bit Windows (for the most part, Windows 7, 8 and 10).  As you noted, all the toolboxes have 32-bit versions, and many do not have 64-bit versions (although that is changing).  If you don't need the memory of the large model (and have the memory to support), I recommend sticking with 32-bit LabVIEW.  You will have less room for error and Confusion.

  Bob Schrede

• X120e-Thinkvantage Toolbox displays wrong product id

  Hi everyone, this is going to be a bit long, so thank you in advance for your patient. :-)

  The boot loop (explained in a previous post) my problem was solved by changing the motherboard. I'm happy to have my operational x120e.

  Now, I have a very annoying problem. After receiving the laptop, I immediately put to update the latest bios firmware.

  Later I discovered that after I installed the new mobo to the center support they did not update the type of product, a serial number of the machine in the BIOS. So the thinkvantage Toolbox displayed an incorrect product id: qqqq2ru. As you can imagine that the system cannot be automatically updated because there is no product with this identification number.

  After hours of searching on Google I found a copy of the disk of hardware maintenance (v1.78, please don't ask me how I did it) and I managed to update the BIOS with the right product and SN. I thought, oh, what a relief to e. This until the computer is restarted. The Toolbox now shows the correct SN but the same incorrect product id: qqqq2ru

  I thought that maybe I should reinstall the system to factory default. Done, but the result is the same. My product in the Toolbox TV id is on qqqq2RU, although in the bios, I see the correct model, in my case 05962RU.

  Can anyone shed light on what could be the problem?

  Any help will be much appreciated.

  Thanks in advance

  abvasili

  OK, I solved this.

  Aparently, the cause of the problem was Flash new bios without the first writing of the info in the BIOS (Serial Number, type of product, etc.)

  I have downgraded the bios with an old version and deleted the product type. Voila. ThinkVantage Toolbox recognized my product id, etc. of SN. After that, I updated the bios with the latest version and now everything is fine.

  Hope this will help someone with the same problem in the future.

  Thanks for reading.

  abvasili

• Intel SSD Toolbox 3.01

  A new Intel SSD Toolbox has been posted on the Intel Web site. The program will check and provide for new firmware updates, show the current state of the SSD and the remaining time.

  Thank you!

  The link is:

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455

  I also found that there is a new version of the RST on thus:

  http://www.Intel.com/p/en_US/support/detect

• Leaks memory database Toolbox

  I have leaks memory in my Labview application linking and insertion of data in a Server MSSQL using Labview Database Toolkit.

  Versions: Labview 7.1, Toolkit 1.0.1.

  I searched the forums and searhed all over elsewhere... In my view, that there are some problems. (For example the list tables vi). Removal from the list of tables vi helped a lot. But I see that I'm losing memory here and there, from time to time.

  My question is: Y at - he of the General guidelines to avoid any leaks memory mentioned?

  Or maybe, all that will disappear if I update versions. (If I understand correctly I've also updated of Labview to be able to update the Toolbox?)

  Best regards

  / Jesper

  There is a small amount of memory allocated whenever you make an 'open '. If you open repetedly who could explaing a small slow leak. The workaround is to open once and re - use ref. Closed only when you encounter an error or are done.

  Ben

• cvicc on Ubuntu 12.04 toolbox.c undefined reference to 'GetCtrlAttribute '.

  I try to use cvicc to compile a GUI using Ubuntu 12.04 64-bit (originally written under Windows).  I had this working fine on RedHat 5 and 6 (the two 64-bit), so I know that the code is very well.  I have also all 32-bit libraries installed.  I also know that this machine will be to compile the code relatively complex, because I was able to compile the code C and C++ CUDA very well.

  I get errors like:

  Toolbox.c (.) Text + 0 x 13581): refers to 'GetCtrlAttribute' the undefined

  After you run

  cvicc project_name.prj

  So far I have not been able to understand the underlying problem.  I have been in charge of research and stumbling autour with this all day.  I'm not an expert of LabWindows/CVI.  Thanks in advance for any help.

  Hi cbrinegar,

  Please try to add the box library to LabWindows/CVI tools so she can access the Toolbox functions.  You can do this by selecting library from the menu bar and choosing Customize... in the resulting drop-down list down.  Customize the Menu library dialog box, click Browse and locate the file: toolbox.fp location: \toolslib\toolbox\toolbox.fp, where xxxx is the version of LabWindows/CVI number you use.  "Select the file and press on Select ' OK to complete the loading of the library.

  After trying this, please let me know if you still encounter errors of definition.

  Kind regards

  Hi cbrinegar,

  I apologize for the misunderstanding earlier.  Having to manually include your libraries should somewhat with CVICC under Linux.  You can find more information about it, here.

  Kind regards

• Help! HP Toolbox does not work under Vista

  When nearly two years ago, I added a Vista PC to my network, I found that the HP Toolbox software - necessary to monitor the level of status and toner for my LaserJet 1320 - wouldn't install or run under Vista.  I contacted HP and they told me "us working on this and should have a new version available soon.  I regularly, come back and still would get a similar response.  Now that I replaced my last XP machine with a Vista computer, I'm more in need of this utility than ever.  I sent HP Technical Support and I was told ' sorry, pal, but you're out of luck.  The 1320 is no longer a current model so can't stand us it anymore. ' (With a strong commitment to customer support, I'm surprised they even bother to release the drivers!)

  Does anyone have a fix for this problem?

  After reading some other forums, I found that when you print a Test page through printer menu options, the page displays the ink levels.

• All-in-one printer, Dell V305w wireless - Imaging toolbox

  Suddenly have a problem with the imaging Toolbox - does not open! before no problem. When I try to open it says I need now of Microsoft.NET Framework version 2.0, although that is not compatible with my system and I already have version 4.0 installed

  Hi Aldan7,

  This problem can occur because of a corruption in the installation of .NET Framework.

  You can follow the steps to repair the installation of .net framework.

  a. Click Start, and click Control Panel.

  b. navigate to the program and features.

  c. scroll down for Microsoft.Net Framework 4 Client Profile, do a right click.

  d. it will give you a choice of uninstall/change, click it.

  e. you will get an option to repair, select Repair.

  f. restart the computer and check.

  Hope this information is useful.

• How to install the spectral measures and Modulation for several versions of Labview Toolkits

  
  

  Hello dear,
  This is a known issue. You can read in the readme of the modulation toolkit:

  Two Versions of LabVIEW installed
  The installer supports the installation of the Modulation Toolkit into one
  version of LabVIEW; installation of the tool in several separate
  facilities (e.g. LabVIEW 7.0 and 7.1 installed LabVIEW LabVIEW
  on the same PC or in separate directories) is not supported or recommended.
  A way not supported to do but involves manually copying files from
  one LabVIEW installation to another. To do this, you can install the
  Modulation Toolkit to the base of a LabVIEW installation directory, and
  then manually copy the files installed in the other installation of LabVIEW.
  The following list includes files and relevant directories. Copy all the files
  These directories, including subdirectories, using the equivalent
  paths related to the House LabVIEW directory for the target.

  \vi.lib\AddOns\Modulation\*.*
  \vi.lib\AddOns\NISML\*.*
  \examples\Modulation\*.*
  \resource\objmgr\NIMTAttribs.RC
  \resource\objmgr\NIMTAttribs.RCH
  \help\lvmod.txt
  \help\lvmod.chm
  \help\lvdmt.txt
  \help\lvdmt.chm

  Note that this list does not include installed files. Also, copy
  the files in this way is not equivalent to a complete installation in the
  another version of LabVIEW. Especially own error text to the
  Modulation Toolkit will not be updated and the example Finder ads will be
  the examples of Modulation Toolkit.

  Jerome

  "CherieC" wrote in message news:
  [email protected]...
  > I installed NOR-RFSG, NOR-DAMA, the Spectral Measurements Toolkit, as well as the
  > Modulation Toolkit.  I have two LabVIEW 7.1 and 8.0 installed on my
  > system.  I developed an application in BT 8.0 and now I need to come back
  > to LV 7.1.  The problem I have is that the add-on toolkits appear to
  > only have been installed for LV 8.0 because there are several missing screws
  > and control when I try to open the LV 7.1 version.  I tried
  > re - install tool boxes, but this is not solved the problem.  How
  > can I get the installation program to install the toolboxes for two versions of
  > LabVIEW?
  >
  > Thanks for your help,.
  > Honey

• Help! How can I call the Matlab file with toolbox (matlab 7.1) in labview 8.6?

  Hello

  I developed a file matlab to optimize a system, it's Toolbox. Entries should be in Labview but also the outputs should be included in the labview graph.  The results include arrays. CVI is not installed. My labview is version 8.6. MATLAB is version 7.1.

  (1) is the version of labview and matlab questions in this problem?

  (2) what is the best solution? Matlab script? DLL? Active X?

  (3) if I could use matlab script, I define the type of each variables in labview, including those of the code?

  Thank you!

  Jessie

  Step 1: Learn patience. This forum provides no immediate technical assistance. It is composed mainly of volunteers, and most of us have full-time jobs.

  (1) is the version of labview and matlab questions in this problem?

  Not really.

  (2) what is the best solution? Matlab script? DLL? Active X?

  Any of these will work. If you want to use the script, then you must use the Matlab Script node. This allows you to enter the Matlab code directly in the node, or you can call scripts that you have on your file system. This method requires that you have MATLAB hand whole on the target computer. If you create a DLL Matlab, then you use the node library function call and call the DLL as any other DLL. This method simply requires that you have the Matlab Runtime on the target computer.  I assume when you say that you're referring to writing your own ActiveX ActiveX component?

  (3) if I could use matlab script, I define the type of each variables in labview, including those of the code?

  I don't know what you mean by defining each variable type. You need to create the entries and exits on the Script node Matlab, so you can pass data between LabVIEW and Matlab environment. The help of LabVIEW contains more information on the use of the Matlab Script node. There are also some examples with LabVIEW.