All-in-one printer, Dell V305w wireless - Imaging toolbox

Suddenly have a problem with the imaging Toolbox - does not open! before no problem. When I try to open it says I need now of Microsoft.NET Framework version 2.0, although that is not compatible with my system and I already have version 4.0 installed

Hi Aldan7,

This problem can occur because of a corruption in the installation of .NET Framework.

You can follow the steps to repair the installation of .net framework.

a. Click Start, and click Control Panel.

b. navigate to the program and features.

c. scroll down for Microsoft.Net Framework 4 Client Profile, do a right click.

d. it will give you a choice of uninstall/change, click it.

e. you will get an option to repair, select Repair.

f. restart the computer and check.

Hope this information is useful.

Tags: Windows

Similar Questions

  • E-all-in-one printer want 5530: wireless set up for jealousy 5530

    Our new HP Envy 5530 printer works very well connected via a USB cable, but cannot be found by trying to set up as a wireless option with either my Lenovo H5 PC (via a Netgear A6200) or a laptop Lenovo W540.

    The printer connects to the same / correct SSID (BT Hub 3.0) and I tried to remove the firewall to see if it was what kept the whole upward.

    Any help would be appreciated.

    Welcome to the community @Matticus HP

    I read your post on how your printer is not detected when you try to set up wireless. I want you to try the steps in the guide below you should get properly connected wireless.

    A 'printer' display the error to the HP ENVY 5530 e-all-in-one and Deskjet Ink Advantage 4510 e-all-in-One Printer Series

    You can also see another thread, that I posted and check your router settings if the guide above did the trick:

    Re: HP 7520 loses connection wi - fi

    Good luck!

  • All-in-One printer, Dell 810 owners thread

    Please follow the instructions below and then tell me what happens.

    First of all, let us make sure that your computer has the latest Windows updates, especially of .net framework, necessary to run many applications and the latest Java.

    Unplug your printer. Download and run this patch (Patch must be run on Vista machines) to completely remove the printer from your computer. Run the patch until it prompts you to restart your computer.

    If you use Windows 7 also try... Driver Manual printer removal

    Restart your computer.

    Download the correct drivers.

    XP drivers

    Vista 32-bit drivers

    NOTE from the ADMIN: Broken link has been removed from this post by Dell >

    Vista 64-bit drivers

    All other drivers

    Install the appropriate drivers. You will be asked when connect you your printer (power on)

    To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

    If you use Windows 7, use the Vista drivers in compatibility mode.

    Right click on the file setup.exe, on the left, click Properties, compatibility of the left click. Replace the Vista compatibility (Vista try ONLY). Then, install the appropriate drivers. You will be asked when connect (printer)

    To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

    In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

    Scanning

    Scan using the USB connection, open the Dell all-in-one Center, click on the scan and copy and scan from there.

    Scan wireless, use the buttons to scan on the printer.

    Rick

    I also could not print or scan and got the next window, staring pop around Nov 18/09 that I attributed to perhaps a few updates of Windows or Kasperksy Interenet 2010 updates:

    When I did restore to the 16 Nov/08 everything worked fine, but it seems that the updates have been installed I found myself with the same problem. I then tried to work backwards and uninstalled KIS which resulted in the printer and the scanner works until I close the computer or rebooted and got the same message at startup. I then disabled windows defender and windows firewall with the result of printing and scanning to work until I rebooted. To make sure that was my protection, I downloaded AVG and Malwarebytes and activated Windows Defender and firewall. I was also receiving other messages pop up throughout this process as follows including "Data Execution Prevention:

    I finally found a update for Dell driver and when I downloaded the patch (Dell CleanUpUtility) and driver (R145903) I was always the messages above and only realized after the 4th time when the window popped up asking if I had a drive, would be to insert it, which meant I was only to reinstall the older driver. When you get this window just close it so that you only install the new downloaded driver. It turns out that both the printer and the driver are busy and I did not insert the disc to install the ABBYY Finereader 6.0 Sprint as it appears that he had never uninstalled. I did notice that the AIO desktop computer was different than the old for a while but eventually the old icon. Note that the CleanUpUtility Dell will also uninstall Dell Dock, however, that can be reinstalled from the following site: http://www.delldock.com/

    I have provided my entry earlier, but I when I got the printer and scanner I wanted to see if she was stable and functional at least a couple of days of work. I should also mention that I've turned off automatic Windows updates because I think that's what caused the problems of printer/scanner at first and decide what updates I will download and install that I received notice as well. I have not yet reinstalled KIS 2010 but I can do this after a few days just to see if I can still print and scan, that is, to see if there are problems in addition to KIS that creates the problem. So... try do the patch and the driver install according to the instructions of PudgyOne above, but do not forget, do not insert your AIO 810, CANCEL THE WINDOW WHEN SHE SURGIT driver diskette. Let me know if it works... If not... keep in touch. I would like to let you know that I've probably spent nearly 60 hours trying to get mine to work as I believe that there is always a way. I also did a number of other things, but I won't get into that right now, until you download the Patch and install the driver because I don't know if at any point you used your AIO 810 drive.

  • How to eliminate the double printing using Windows Vista and the printing of a brother, all-in-One Printer, MFC 490CW wireless configuratrion?

    Example:

    NNooww iiss tthhee ttiimmee ggoooodd mmeenn ttoo ccoommee ttoo tthhee aaiidd ooff tthheeiirr ccoouunnttrryy aallll ffoorr...

    Print appears as above, except that the spacing between the characters seem to be a space of 1/2 rather than a complete space.

    Thank you

    Hello
    • When you try to print?
    • What were the changes made before the show?
    • How long have you been faced with this problem?
    You can view these methods:
     
    Method 1:
    I suggest you to check the print preview .
     
    Method 2:
    Uninstall the driver and the printer software:
    1. open devices and printers, click the Start button, and then on the start menu, click devices and printers.
    2 - Click on the printer you want to remove, click on remove the device and then click Yes.
    If you can't delete the printer, right-click again, click Run as administrator, click on remove the device and then click Yes.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    3. click on the properties of high print server of the screen and select the tab drivers, under delete evyrhing is installed as a printer except the xps document writer and send a note to the driver package.
     
    Step 2.
    Install the printer.
    Now reinstall the printer, refer to the article below to install a printer.
    Install a printer
    http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
  • OfficeJet Pro 8500 Wireless all-in-One Printer - A909g User guides

    Can you send a fax from a PC to an Officejet Pro 8500 Wireless all-in-One printer when connected wireless?

    Hello dhe8011,

    Welcome to the HP Forums!

    I understand that you would like to know if you can send faxes from your computer. Yes, you are able to perform this function, but must be in place. What is your operating system on your computer? Click here to read: Windows.

    Please follow this entire document from HP on the sending of a Fax from your PC (Windows 7 or Windows Vista).

    Let me know if this document solved your problem or not.

    Impatience on your part.

  • 5740 HP e-all-in-one printer: how to change the destination for the scans folder

    I bought a HP Officejet 5740 e-all-in-one printer I connected wireless to a Win 7 PC. A month later, I added a new win 10 PC in my network (LAN), and I also installed the printer on this new PC. When I went to scan a document using the HP (NO Windows Fax and Scan) print software, the printer asked me which PC to scan to, and I chose the old Win 7 PC. The scanned image went to the folder My Documents\My scans of Win 7 PC, as expected.

    Two questions, both assuming I want to use the HP software to scan:

    1. is there a way to set a default value of PC to the computer target for digital images?

    2. How can I change the folder to which scaned images are sent?

    What are the answers to these two Qs if I decide to use Windows Fax and Scan instead of the printer software?

    Any help would be appreciated.

    Roy

    Hi Roy,

    Yes, you get a more integrated experience if you install the vs HP software by using the Add method of the printer.   And Yes, you should be able to do much more PC software rather than on the front panel of the unit.    And Yes, the aspect analysis software PC is much better than the Windows Fax & Scan.   Windows Fax Scan & gives a good experience of the box and is sufficient for many, but for those who want to do more, such a framing auto, rotate, reorder pages, etc... the HP scanning software is much better.

    I forgot what version of HP comes with your OJ5740 scanning, but we she recently rejected a new more complete solution that comes with the version that installs for your device recommended.   Here is a link where you can get that below.   I recommend you to install the latest web downloadable full version for your device first.   Then install this

    HP extended Scan

    FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi for Windows.

    You'll then have two versions, one called "HP Scan" and the other called "HP Scan extended.   If you find that "HP Scan" looks like 'HP Scan expanded', while the product was the version latest (we drove to this new version about 2 years ago).

  • VMPlayer cannot detect the scanner for all-in-one printer?

    Hello.  I am running Linux Mint 14 in VMPlayer on your desktop AMD Win7 hexagonal base.  The implementation uses a MG5320 Canon all-in-one printer on a wireless network.

    Symptom: When you try to use the scanner under Linux software, I get an error that does not scan.

    Comments: I know that the printer is connected and can print from VMPlayer.  I used the scan software successfully in a Win7 laptop boots double in Linux Mint 14.  Therefore, the only difference is running Linux Mint in VMPlayer.

    How can I get the functionality of the scanner of my all-in-one printer with VMPlayer?

    TNX in advance for all advice.

    The 'virtual' printer in the virtual machine settings through the present printers on the host - there should be no impact on your ability to 'normally' adding printers inside the guest.

    Unfortunately, I'm not familiar with the same type of printer, and I'm not Linux.

    The thing is useful that maybe I can tell you, is that you may need to configure the virtual adapter as connected by a bridge instead of the default NAT.

  • Canon PIXMA MG5220 Photo-All - in - One Printer - my printer print when connected to the computer, but not when it is wireless

    Window indicates that my new printer Canon PIXMA MG5220 Photo All in One Printer is compatible with my Dell Inspiron E1705, my printer prints so that connected to the computer but when I try to print wireless, it does not work. The printer is wireless and I have a wireless cable modem, what am I I lack to the printer wireless?  Please advise.

    Hi LouiseFarmer,

    It seems there is a problem in the basic WIFI the printer setting.

    I suggest you show the manufacturer's Web site to learn more about the drivers and the printer setting to print via WIFI.

    http://USA.Canon.com/Cusa/consumer/products/printers_multifunction/photo_all_in_one_inkjet_printers/pixma_mg5220#MiscWirelessHelp

  • Printing DCP color red problem - HP Officejet Pro 8500 Wireless All - in - One Printer, the 4th copy

    I have a HP HP Officejet Pro 8500 Wireless all-in-One Printer and try to print 75 copies of a program for our event. After the first 5-6 pages the RED in my program starts to turn magenta. I have new HP ink cartridges and print on HP Color Injet paper. I have renectly replaced the Black/Yellow Printhead (at least 6 months ago). At the beginning when I cleaned the printheads, I was able to print 2 or 3 pages showing my color RED. Then back to magenta. When I received the images of test after you have cleaned the print heads, they are all perfect, no lines.

    What happens and how can I solve this problem?

    Hi TM1997,

    Thanks for the reply!

    Given that the printer seems to work for a bit and then comes back to the same question, it must be a problem with the printhead (Cyan/Magenta one) or the ink lines that go from the cartridges to print heads. First of all, I would suggest that you check the warranty date on your printhead C/M. If it is under warranty contact HP Technical Support in your area and inquire about a replacement, but if not, it's you if you want to replace the print head, printer service, or look into an upgrade.

    Have a great weekend!

  • HP Photosmart Wireless e-All-in-One Printer series - B110

    Hello

    I have the above printer and I m finding difficulty in ordering ink cartridges.

    The available cartridges are:

    HP Photosmart Wireless e-All-in-One Printer series - B110a

    HP Photosmart Wireless e-All-in-One Printer series - B110b

    HP Photosmart Wireless e-All-in-One Printer series - B110c

    HP Photosmart Wireless e-All-in-One Printer series - B110d

    HP Photosmart Wireless e-All-in-One Printer series - B110e

    I don't know the one to choose. Can someone help me choose the right cartridge please.

    Thank you

    Presho

    In the United Kingdom, the cartridges would be 364 series.  You can order black, cyan, magenta, yellow or pack combo with three cartridges.  The cartridge photo and four packs of color with the photo cartridge are not applicable for your printer.

    You can also use the XL 364 cartridges, they have more ink at a higher price, but at a lower cost per page.

  • . HP Smart printing fails to include images - all-in-one printer, HP Photosmart 3210

    With the help of HP Smart printing on all-in-one printer, HP Photosmart 3210. Smart photo has disappeared from my computer and now reappeared. Now the images are not yet an option to include on the printed page. They do not appear.  Has anyone else had a problem with Photo Smart?

    What operating system do you use?

    What did you do to make them reappear, or just is it?

    Have you noticed updates to HP or Windows until the printer is missing? What happened before he reappeared?

  • Photosmart Premium Fax c309 Series all in one printer Wireless Radio does not work

    Some time before, the radio on my Photosmart Premium Fax c309 series wireless all in one printer stops working.

    With a wireless network test:

    Wireless is on (but light indication only is not lit)

    wireless network card has failed

    "The wireless radio does not work.  Contact Hp support.

    Any help would be greatly appreciated!

    Thank you

    Smithb2

    Hi smithb2, welcome to the forums there.

    I saw your post on the wireless radio does not not on your model Photosmart C309.

    I did some research and came across this post in the community that seemed to have worked for others with the same problem.

    Re: Without the printer wireless radio does not

    I hope that helps!

    If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

    Have a great Thursday

  • How to get the Dell 944 Photo all-in-one printer driver to work

    I just bought the Inspiron 580 and am trying to use my existing printer (Dell Photo All in One 944) how to download correct driver for the printer to work with the new computer?

    S Pipkens,

    First run delete print jobs to remove all print jobs stuck in the queue.

    Unplug the printer.

    Download and run the patch (utility cleaning printer) untip it prompts you to restart your computer.

    Restart your computer. Make sure that the printer has been deleted. Driver Manual printer removal

    Download and install the proper drivers from...

    Reference Dell 944 all-in-One Printer owners thread (W7) (Patch is also located here)

    Firewalls and anti-virus programs will block communications.

    Rick

  • My HPOfficejet j4680 wireless all-in-one printer error message says its offline

    I have and have used several times my HPOfficejet j4680 wireless all-in-One printer to print. But this past week it will not print. I keep getting error messages that says that it is offline or turned off. But the green power light is on. The blue wireless light is turned on. And the date & time is common and pulled down on the front.

    Yet, I just continues to be my what. Any suggestions? Thx John.

    Hello JohnGeiser,

    Take a look at following print references:

    Open the printer Troubleshooter
    Why can I not print?
    Find and install printer drivers
     
    Let us know if that helps.
     
    Best regards
    Matthew_Ha
  • HP ENVY 5530 e-all-in-one: printer is not to connect to the Internet wireless

    Hello

    English is my second laungage. hope you understand...

    I can print with printer through windows and Mac PC cable. but, I can not connect between rutour and the wireless printer.

    I used the Setup Wizard and found the SSID name. I typed PW. but "Not connected" is displayed.

    I print the Configuration Page from HP network.

    Live wireless

    Status on

    What else can be done using wireless printer.

    Kind regards

    MI-Ko

    Hello

    If you try to connect your printer to the router, you should make sure that wireless Direct is trurned to offshore. Direct wireless is a feature that allows you to connect a device directly to your printer without router (the printer generates its own wifi)

    Please turn off direct wireless (it's often a button on the front panel) and try to connect again.

    I have included a link below for you rprinter support page that contains the user guides that should help also.

    http://support.HP.com/us-en/product/HP-envy-5530-e-all-in-one-printer-series/5304881/model/5304882

Maybe you are looking for

  • How can I get my computer to recognize this boot disk?

    Hello I followed the instructions on how to create an installer for OS X El Capitan bootable. I've set up on a USB key. But how do I get my computer to recognize it as a bootable disk? If I go into system under the startup disk Preferences, it is not

  • 8-bit color?

    You read that right: my VI displays data for 8-bit with colors. Well not exactly with the color, but let me explain. I wanted to do a basic image processing and tried as a result of: Get a picture of my webcam Convert the image to 8-bit Transform dat

  • I need assistance with halo 2 cd key serial

    I just bought a used version of halo 2 for windows vista and I can not play because my serial cd key does not work, can I get help here please?

  • Failed to add an e-mail account

    Okay, do you have the factory reset after download of 2.2 and it fixed some stuff, but now I can't add my email account (cox) - I get an error indicating that the social service is uable to automatically configure this account. When I try to configur

  • Tower PC and monitor does not turn.

    Turn on PC and monitor is not responding. Turn on the monitor and a message on the screen says "No Signal", then turns off. Also 'Num Lock' key will not turn the Verr Num keyboard light.