Vertical alignment of the table cell can be defined via CSS?

Similar Questions

• Lose the vertical alignment of the table during the conversion of the ditamap to book

  FrameMaker Version: 12.0.4.445 (later part of TCS5)

  1. I have a project structured, where several XML files have been grouped in a ditamap.
  2. For one of the XML files, I have a table, where I need to set the cell Vertical alignment of cells in the MIDDLE.
  3. So using Paragraph Designer > table cell, I have change the entries in the top in the Middle (the default values have been Top).
  4. With the ditamap pane selected, I'll then menu file > > Save Ditamap under
  5. I save ditamap as ' book with fm components 12.0 (* .book) "file type.
  6. In the resulting book, the XML files are now. FM files.

  However, at this point, when I open the. File of FM which has the table, the cell styles back to the TOP.

  I searched high and low for a similar problem. It's look like a bug to me, but can someone confirm?

  Thank you

  No, this is not a bug by itself. I bet that the alignment is lost before you generate the book. After you set the alignment and saving and closing the file... reopen and see if the alignment is still there... I bet it's gone. As a general rule, you cannot apply put in shape or properties to objects (elements) in a DITA file. This applies to font and paragraph properties as well as table set in shape and other types of development in the form. All you can do is create items and set attributes. Any parameter properties will usually be lost on file save.

  You would probably need to have a 'process of publication' (script any) you run your generated book and chapter files that would scan for an attribute that shows some properties must be set on the table. The @outputclass attribute is typically used for this kind of thing. I'm not aware of what anyone in default FrameMaker DITA, who put in place to manage this type of formatting of the tables.

  If this formatting that you try to apply is consistent for the whole table, it is possible that you will be able to do this by creating a new table format that has this set of default formatting. When you insert a table in a subject, the table format is assigned to the tgroup/@outputclass attribute and this is the form that is used when rendering the table. Just create a new table in the structured application model and put in place this format to have the properties you want. Then, when you insert the table, be sure to select this format. It can be hard to set this up, but it * should * work.

  However, if this does not work, or you need more refined formatting applied to the parts of the table, I produce a tool called DITA-FMx, which offers extended DITA creation and publication of the options for FrameMaker. It offers features that allow this type of table set shaped to be applied by setting the attribute @outputclass to a specific value on the line or cell. You can get more information on DITA-FMx here...

  http://leximation.com/DITA-FMX/

  Good luck!

  Scott Prentice

  Leximation, Inc..

  www.leximation.com

• a cross on the table cell

  Is it possible a cross on the table cell?

  The term "strike" can have multiple interpretations.

  1. As a checkbox clickable?
  2. With diagonal lines, which intersect?
  3. With vertical lines or horizontal hash?
  4. With table cell fill of a model image pre-built?
  5. With gray scale or the fill color, without content, to suggest the use of cell?

  Pages, you didn't say what version, so I'll use v5.6.2, does not provide the points 1, 2 and 3 for the cells in a table.

• How do I get the table cells?

  It's my get code that any object in propagation.

  Int32 childCount = parent-> GetChildCount();

  for (int32 /IndexEnfant = 0; childIndex < childCount; /IndexEnfant ++)

  {

  InterfacePtr < IHierarchy > child (parent-> QueryChild (childIndex));

  ChildUIDRef = UIDRef: GetUIDRef (child);

  TextFrame table

  }

  How do I get the table cells?

  You can access the table using ITableModel and GridAddresscell.

  But to get to the ITableModel since ITextModel implies some complexity.

  Few things to understand:

  -L'interface that corresponds to the written document is ITextModel

  -The recommended method to iterate tables in a story done by ITextStoryThreadDictHier

  -Get the ITextStoryThreadDictHier on the history and the main thread as ITextStoryThreadDictHier::NextUID()

  -Now get ITextStoryThreadDict for UID and query for ITableModel. If you get ITableModel, then you have found the table.

  Once you have ITableModel you can get ITableCell as follows:

  ITableModel:QueryCellContentBoss(GridAddress); Give ITableCell

  You can refer to SnipperRunner (SnpManipulateTextModel).

  Download text template table model:

  InterfacePtr textModel (storyUIDRef, UseDefaultIID());

  InterfacePtr textStoryDictHier (textModel, UseDefaultIID());

  NextUID UID = sourceStory.GetUID (); / / Download the main thread dictionary

  Now loop the dicthier to iterate through all the threads dicts.

  InterfacePtr textStoryThreadDict (sourceStory.GetDataBase (), nextUID, UseDefaultIID());

  InterfacePtr tableModel (textStoryThreadDict, UseDefaultIID());

  If (tableModel) / / the storythreaddict represents a table

  {

  You are now in a table

  }

• The table cell background image problem-

  I'm sure it's something super simple, but I can't see what it is. I'm working in Dreamweaver CS3, but having to modify the code by hand, because the code is not validated I fight to clean up the last error on this page before applying the model it is based on the rest of my site...
  
  This page was based on the original model: http://jpcltdservices.com/template-page.html
  
  As you can see by the w3C validator, it had a number of problems with the tags for the table background image:
  
  http://validator.w3.org/check?URI=http%3A%2f%2Fjpcltdservices.com%2Ftemplate-page.html & cha rset = (detect + automatically) & doctype = Inline & group = 0 & verbose = 1 & st = 1 & user-agent = W3C_Validator %2F1.606
  
  I cleaned up by adding the table background image css to my stylesheet main and changed the code in the page for suggested type reference.
  
  http://jpcltdservices.com/Alternate_template_page.html
  
  W3C validator shows now only 1 error:
  
  http://validator.w3.org/check?URI=http%3A%2f%2Fjpcltdservices.com%2FAlternate_template_pag.html & charset = (detect + automatically) & doctype = Inline & group = 0 & verbose = 1 & st = 1 & = _Validator%2F1.606 W3C user agent
  
  The problem is, if I replace the background = "Images/CellBG1sm.jpg td' on line 34 with style ="background-image"td tag that works on line 27, the background image disappears completely from the whole table!"
  
  I'm sure it's something super simple, but I can't see it. I'm working in Dreamweaver CS3, but having to modify the code by hand, because the code it generates does not validate in many cases.
  
  

  TequilaMockingbird published in macromedia.dreamweaver

  > I cleaned up by adding the css to the bottom of table
  > image to my main
  > sheet style and changed the code in the page to the suggested
  > reference style.
  >
  > http://jpcltdservices.com/Alternate_template_page.html
  >
  > W3C validator shows now only 1 error:
  >
  >
  > http://validator.w3.org/check?uri=http%3A%2F%2Fjpcltdservices.com%2
  > FAlternate_te
  > mplate_page.html & charset = (detect + automatically) & doctype = Inline & group
  > p = 0 & verbose = 1 &st=1&user-agent=W3C_Validator%2F1.606
  >
  > The problem is, if I replace the td
  > background = "Images/CellBG1sm.jpg" on "
  > line 34 with style = "background-image" td tag that works on
  > line 27, the background image disappears completely from all
  > table!

  You seem to be sensational. The CSS validator is another object of value
  tool: http://jigsaw.w3.org . I suspect this first error to main.css is
  the incorrect syntax used here:

  background-image: {"url... / Images/CellBG1sm.jpg";}
  ' background-repeat: repeat;
  }

  Go ahead and remove this rule completely.

  For an inline style, try this:

  But it might be better to remove all those inline styles and use your
  external main.CSS. For example, you are not currently using. MainContent,
  so maybe it's a good place:

  . MainContent {}
  do-family: Arial, Helvetica, without-serif, Tahoma;
  color: #3F3F61;
  do-size: 100%;
  background-image: URL("Images/CellBG1sm.jpg");
  margin: 0 auto;
  padding: 0;
  Width: 790px;
  }

  Then, in the table cell or appropriate:

  
  or
  

  Not quite $ $0,02, but HTH

  --
  Mark A. Boyd
  Keep-on-Learnine :)

• background in the table cell alignment does not work

  So I have one one line, a 2 column table.  In the second/last column, I have an image which must be low and stalled on the right.  However, no matter what I do, I can't image to sit at the bottom of the cell.

  If I add columns and move the image to one of the Interior columns, it aligns bottom, but if I then delete the column to the right (so that the image is now, once again, in the last column) once again the image is not aligned.

  I tried to give the image a negative margin of down, but that does not work.

  Here is the code:

  < td = class "last" style = "" vertical-align: bottom; "> < a href ="#TOPofPage1"> < img"

  "SRC ="... / RESOURCES/i_SPECIAL_art/RETURNtoTopIcon.png "alt =" "class ="TOPofPage""

  style = "" margin-bottom:-12px; "/ > < / a > < table >"

  Here's what it looks like:

  

  If the orange circle with the white triangle be resting at the bottom of his column... Why is it not?

  When I copy the code of your cell and just change the image of a flat triangle I, the alignment of bottom and negative margin works correctly.

  Check other style in the tr and labels of table and also all the styles applied to a party any of the table - maybe something it's setting of the alignment of the cell.

  If nothing seems obvious, perhaps copy the entire table in a fresh test project to see what's happening and add little by little in your styles to see if you can reproduce.

• Question vertical alignment of the contents of table in Dreamweaver cs4

  Hello

  I can't understand it. I did a sample file (code below) to debug my problem.

  I have a table within a table. Both have no fill of cell or alignment, spacing and albums, yet, the text appears at the top but there is a gap between the top of the cell and the text. Someone had this problem? Even when I place an image in the table, although the pictute is X 100px, 100px and table size the same, here again it is a gab between the picture and the top of the table?

  Thank you very much

  

  < body >
  < table width = '500' border = "0" cellspacing = "0" >
  < b >
  < td valign = "top" bgcolor = "#00FF00" > Test < table >
  < /tr >
  < b >
  < td valign = "top" > < table width = "100%" border = "0" cellspacing = "0" cellpadding = "0" >
  < b >
  < td valign = "top" > < p > this text is in a table inside the first < /p >
  < p > times tables have no cellspacing and no cellpadding text still does not entirely to the upper part of the cell/table! < /p > < table >
  < /tr >
  < / table > < table >
  < /tr >
  < /table >
  < / body >

  View the living example of a base table.

  http://ALT-Web.com/demos/basic-table.html

  Content in the cells of a table is carried out by the title and paragraph styles.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• Vertical alignment off the coast in the columns of the table

  I have a table with 3 columns with a line above and below
  To align the text in the column left and right to the top, but in the Central column, the text will not align upwards. It's OK in IE, but in Firefox 1.6 is down by 1 line
  
  How to fix?
  
  David
  
  <! DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional / / IN" " http://www.w3c.org/TR/1999/REC-html401-19991224/loose.dtd" >
  < HTML
  xmlns =" http://www.w3.org/1999/xhtml" > < HEAD > < TITLE > BustedComputer < / TITLE > "
  < META http-equiv = Content-Type content = text/html"; charset = iso-8859-1 "/ >"
  < style type = "text/css" >
  <!--
  {body
  do-family: Verdana, Arial, Helvetica, without serif.
  do-size: 11pt;
  Color: #000000;
  left margin: 0px;
  margin-top: 0px;
  
  }
  table, td
  {
  border-color: #000000;
  border-style: solid;
  }
  Table
  {
  border-width: 0 1px 0 1px;
  border-spacing: 0;
  border-collapse: collapse;
  }
  TD
  {
  margin: 0;
  padding: 10px;
  border-width: 1px 1px 0 0;
  vertical-align: top;
  }
  a: link {color: blue; text-decoration: none}
  a: active {color: blue; text-decoration: none}
  a: visited {color: #0000FF; text-decoration: none}
  a: hover {color: blue; background-color: #FFFF9D; text-decoration: underline}
  
  ->
  < / style >
  < / HEAD >
  < BODY >
  < TABLE cellSpacing = 0 cellPadding = 0 width = 800 align = center border = 0 >
  < TBODY >
  < b >
  < TD colSpan = 3 bgcolor = "#6699FF" > Top < table >
  < /TR >
  < b >
  < TD width = "150" bgcolor = "#6699FF" > < a href = "#" > leftside < /a > < table >
  < TD bgcolor = "#FFFFCC" > < p > contrary to popular belief, Lorem Ipsum is not simply
  random text. It has roots in a piece of classical Latin literature
  45 BC, making it over 2000 years. < br >
  < br >
  Lorem Ipsum comes from sections 1.10.32 and 1.10.33 of "of Finibus.
  Bonorum and Malorum"(The extremes of good and evil) by Cicero, written
  in 45 BC. This book is a treatise on the theory of ethics, very popular
  during the Renaissance. The first line of Lorem Ipsum, "Lorem ipsum dolor".
  sit amet... ", comes from a line in section 1.10.32. < /p >
  < Table >
  < TD width = "150" bgcolor = "#FFFFCC" > < table > right
  < /TR >
  < b >
  < TD colSpan = 3 bgcolor = "#6699FF" > bottom < table >
  < /TR > < / TBODY > < / TABLE > < BODY / > < / HTML >
  

  If you see the top margin on the

  Tag?
  

  DOH! DOH! DOH!

  Thanks, removing it solved :)

  David... DOH!

• Alignment of the image cell

  How can I adjust the alignment of the image in a cell?

  Hi Biancardo,

  First, select the cell and apply the justification (left, right, Center...) or the vertical Justification(Top,Bottom,Center...).

  
  

  Kind regards

  River. P

• Contecnt Center of the United Nations in the table cell

  The situation is fairly simple, but I can't understand how of the Nations United Center content in my table cell. I speak not horizontal but vertical center. I want to type from the top left of the cell in the table, not from the Center and that the text is centered vertically.
  
  Sorry, I found the answer.

  The situation is fairly simple, but I can't understand how of the Nations United Center content in my table cell. I speak not horizontal but vertical center. I want to type from the top left of the cell in the table, not from the Center and that the text is centered vertically.

  Sorry, I found the answer.

• hyperlink in the table cell?

  Hi all

  We need to navigate a path for each row in the table control. Is it possible to have a hyperlink in a table for each row cell? or do I have to use button battery to do the same thing?

  Kind regards

  Kanu

  The answer is, you can't. However, the custom hyperlink control is open-source. You can find the source in toolslib\custctrl\hyperlinkctrl.c. It's a pretty simple code module, so it is not all that difficult to modify this code so that it could work in a table cell, rather than a message text control.

  Luis

• How to access the table cell script plugin c labels

  Hello

  We have a plugin written in actionscript, which prepares data in labels of each cell in a row of a table, when the user has their cursor in this line:

  var: a cell = getSelectedCell();

  for each {(var childCell:Cell in cell.parentRow.cells)

  childCell.insertLabel (labelName, theString);

  }

  public function getSelectedCell (): cell

  {

  ...

  var selectedLayers:Array = doc.selection in the table;

  var selectedLayers = obj:Object [0];

  If (obj have PointInsertion! = null) {}

  var ip:InsertionPoint = obj as PointInsertion;

  If (ip.parent cell) {}

  return ip.parent as cell;

  }

  } else if (obj as cell! = null) {}

  return items as cell;

  }

  Returns a null value.

  }

  I am now writing a C plugin that needs to read data using IScriptLabel: once again, when the user has a cursor in the same row.

  My problem is that I can't find (via the C code) against that UIDRefs the labels would have been stored by the script that the table does not seem that the objects of the cell in the same way as the script only.

  Any ideas on how to get the relevant UIDRefs?

  Thank you

  I found the answer:

  1) go to SnpIterTableUseDictHier.cpp.

  (2) go to the function void SnpIterTableUseDictHier::inspectThreadDict (const InterfacePtr& textStoryThreadDict).

  (3) add this code after the line after the line InterfacePtrMyCell (textStoryThread, UseDefaultIID());

  #define Solutiontotheproblem 1

  #if Solutiontotheproblem

  InterfacePtr iscript (textStoryThread-> QueryParent (ScriptInfo::RequestContext ()), IScript::kDefaultIID);

  {if (iscript)}

  Tags IScriptLabel::ScriptLabelKeyValueList is iscript-> GetTags();.

  IScriptLabel::ScriptLabelKeyValueList:iterator iter;

  If (!) Tags.Size ())

  {

  PMString return ("no labels found.");

  returnVal.SetTranslatable (kFalse);

  }

  for (iter = tags.begin (); iter)< tags.end();="">

  {

  PMString returnVal ((*iter).) Key());

  Return +=("::");

  Return += ((*iter).) Value();

  CAlert::InformationAlert (returnVal);

  }

  }

  #endif

  (3) voila!

  Hope that helped. If your question is the answer, please mark my solution as correct

  I used this link for the answer. The main thing to find was finding what associated text interface was IScript is associated with.

• Vertical alignment of the label PanelLabelAndMessage

  By default, the left label is centered vertically. Can it be aligned on it? I think it's desirable design for most of the cases.

  Hello

  labelStyle value = "' vertical-align: top" for panelLabelAndMessage. "

  Kind regards

• Vertical alignment of the text in a box with picture

  Hey guys,.
  
  I would like to know how vertically align you an icon and a piece of text so that they are both centered. The following CSS does not work:
  
  vertical-align: middle;
  
  For an example, please click here. You can see my problem in the download PDF with text read "Download Extended schools brochure".
  
  Thanks for your help

  ForensicBop wrote:
  > Hey guys,.
  >
  > I would like to know how vertically align you an icon and a piece of text so
  > they are both centered. The following CSS does not work:
  >
  > vertical-align: middle;
  >
  > For an example, please click on http://www.skytemedia.com/tester/index.htm. You
  > see my problem in the PDF download with the text following "Download extended
  > Schools book "."
  >
  > Thanks for your help
  >

  Hello

  try to remove the image of the markup and replace in your css for your
  mine...

  #download - menu a {}
  border: 1px solid RGB (204, 204, 204);
  Padding: 6px 6px 24 PX 2px;
  display: block;
  Background: url (.. / images/icons/pdf.gif) no-repeat left Center;
  }

  --
  Chin chin
  Sinclair

• JDeveloper 10.1.3.4: text-align for the table column has no effect

  Hello
  
  I use JDeveloper 10.1.3.4. In a table, I have a column that contains the numbers, which are aligned to the left by default:
  

  Applied
  ---------------
  $50.00
  $2,160.00
  $50.00
  ---------------
  $2,260.00

  I want to be aligned with the right to examine more carefully:

  Applied
  ---------------
           $50.00
        $2,160.00
           $50.00
  ---------------
        $2,260.00

  Or better yet, have the cell with the longest string aligned to the Center, and all the other cells in alignment with it by the decimal point:

      Applied
  ---------------
        $50.00
     $2,160.00
        $50.00
  ---------------
     $2,260.00

  I looked in the property inspector, and the only thing that seems closest to the goal is text-align. I put this attribute on the right (text-align: right) for the column and the outputText, but has no effect. Everything is always embedded on the left. How to do things?
  
  Thank you!
  
  
  Newman

  Hello Newman,

  as I recall, I did using the formatType property = 'number' of the component of the column

  Kind regards

  Branislav