Very Net-delay connection on Lenovo laptop with Windows7 operating system
my laptop lenovo with windows7 after start takes more than 30 minutes to connect to the net, while my older laptop with windows vista compaque connects to the net in the 2minutes.automatic updates are active. I use the Wifi modem. McAfee Antivirus is installed. Kindly help.
Hi rajendrarao,
Thanks for posting your query in the Microsoft Community. According to the description of the problem, it takes a long time to connect to the internet. Provide the following information:
· Did you do changes on the computer before the show?
· You get the error message?
Follow these methods.
Method 1: Temporarily disable the security software .
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2: Follow these steps:
Step 1: Start the computer in safe mode with network and check if the problem persists.
Startup options (including safe mode)
Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow step 3 from the link to start the computer to a Normal startupmode.
Method 3: Follow the steps in the article.
Windows wireless and wired network connection problems
Why can't I connect to the Internet?
You can see these articles for more information:
How can I troubleshoot network card?
How to reset the Protocol Internet (TCP/IP)
I hope this helps. Let us know if you need more assistance.
Thank you.
Tags: Windows
Similar Questions
-
Can someone help me configure HP Officejet 5600 all in one set with windows7 operating system
How to use HP Officejet 5600 all in one set with windows7 operating system
I have a desktop HP Pavilion with Windows 7 Edition Home Premium & I want to connect my HP Officejet 5600.
I get the "not compatible with your operating system" message shortly after insertion & the disc from the printer running. Is someone can you please help me solve this problem. Thank you... JimEverything is now up & running.
Thank you for your help attempt Distinguished Professor, my 4 step method of resolution is shared asAccording to HP Print and Scan doctor, I have the 5610. My manual says only 5600
I just finished successfully installed the full OS & drivers by following these steps.
First of all, (with the disc of the operating system still in drive E, but not running)
Connect the printer to the computer and allow it to be recognized and automatically download all the drivers.
Download 2nd & printing performance HP and doctor Scan http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/en/hho/ipg/forum/printer_diag/&softwareitem=mp-123407-2
3rd download & run HP printer Install Wizard for Windows7 and 8 http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/piw/&softwareitem=mp-122330-1
Once all this has been ran & finished, my DVD RW Drive E automatically started the drive & added all the options of the printer & features for printer, Scanner, copier & fax. Everything is now up & running.
Thank you for your help attempt Distinguished Professor -
Install Windows 7 on Lenovo G500 with no operating system
Windows 7 installation of the cd has frozen to extend the files of 0%. The version of windows 7 previos and all partitions have been removed during installation. I can't access bios or menu command start (Fn + F2 or Fn + F12). All I see is black screen with the lenovo logo. Is it possible to install windows on this machine?
If you have access to a second computer, you can download the contents of the DVD (.iso file) from Microsoft to install from DVD or with a USB key. Alternatively, you can contact Lenovo support via phone and order your set of recovery DVDs.
-
Reinstall WIN XP SP3 to new computer with no operating system
I would like to move my WIN XP SP3 old laptop with no operating system
Thank you
Go to your computer manufacturer's support web site
and search for the Windows XP drivers for your specific computer or motherboard model number.If there are Windows XP drivers, then download to a folder on your hard drive and burn it to a CD/DVD.
Then, after installing XP on your new computer install all device drivers, starting with the mother/chipset, LAN, Audio, USB, SATA card, drivers, and so on.Notes:
If there is no XP driver not listed that your computer is not compatible Windows XP.
You must uninstall the old computer XP, if you plan to use the same XP product key.
List of computer manufacturer support sites:
http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturersIf you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu
Graphics/video drivers:
Check the download site of the manufacture of the graphics card for the newer Windows XP drivers for your card.
ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-usJ W Stuart: http://www.pagestart.com
-
original title: log question.
When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out. How can I fix?
Hi KERRYYX,
- Did you the latest changes on the computer?
- When was the last time it was working fine?
- You have security software installed on the computer?
- What is the full error message that you receive?
- Are you able to restart and shut down the computer?
It is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you put the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See section to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
You cannot log off, restart or shut down your Windows XP-based computer
-
Why the books are grouped and preinstalled with the operating system?
It's complaints
My Portege has Windwosw Vista. I didn't want to buy Vista, but they were only selling with him and no other choice was possible to purchase.
First of all, my laptop had problems to install Windows updates. I could not connect my institution's Internet System. I had to reinstall the system again.
It's a waste of time!After re-installation of the button for the sound on the outside Panel does not work correctly.
Also, when I try to stop the laptop sometimes it restarts itself - he doesn't stop!
Secondly, I had a problem with the laptop, when an opportunity to visit a well-known site, it serves to block itself.
Once, when he is blocked, I had to restart and its screen remained black. They took for repair. It was delivered later - repaired, but with a defect on the screen!
What a... workers!When I bought this laptop he had an offer with the update of Vista with Windows 7 after their release.
Wonderful. But just note, Toshiba has the highest price of the offer, compared to its competitors - 30 (or £) against 15 for others, which of course I'm not going to pay.I already paid for Vista, which is incredible, and I knew, but I had not choice not to buy!
All right, so there is still competition in the market, several possibilities are present - install Windows cracked, switch to Linux or just buy an Apple!
Please, take this comment seriously! And please, stop with group buying, no matter what the benefit is. It won't work for long.
Hi mate
Fact is that most of the laptop manufacturers sell the computer and laptop computer with a preinstalled operating system. So I wouldn't blame Toshiba or other brands for which
You get a new computer/laptop with a new OS.
During the past 20 years, Microsoft released 3.0 Win, Win 95, Win 98, Win NT, W2k, Win XP, Win ME, Vista and Win 7, I remember that all my computers or laptops were grouped with these operating systemsToshiba offers the notebook with a clean image and you can also create a recovery disk (so don t need to buy anything if you need t n)
Of course, each of us can install a clean OS, but there are a lot of people who are happy with such image pre-installed because everything is pre-installed and configured.Many people have no knowledge of computer wide and are really recognizing that everything is pre-installed and the configuration does not have a lot of time
With regard to the question of the laptop;
What to say; you had a bad luck that something was wrong with the laptop. This can still happen that my new LCD TV other manufacturer, was dead after two weeks, I called ASP, then replaced the screen now is ok -
I have problems trying to reinstall my printer software Kodak esp 7250. The area where you register the software is empty and the Browse button to choose a place is gray, so it will not go any further because if you then choose then says invalid path. Of course, it's an invalid path because it will not choose an or allow me to choose one. I contacted Kodak and after working with it for a while, they said it's a problem with the operating system. I have Windows 7 on a laptop Gateway. I need my printer and get very frustrated because nobody seems to know how to solve this problem. I was able to use it when I got to the laptop, but suddenly one day it wouldn't work. Help, please.
Hello
Thank you for your response.
Make the SFC scan and check the status of the issue.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
I would also advise you to check the status of the issue in a new user account.
Create a user account:
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-accountIf it works in a new user account, then you will need to fix the corrupted user profile. You can visit this link for the steps:
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profileI hope this helps!
-
My camera Olympus only works with Apple's Quick Time 7. Is it possible to make it work with my operating system from Windows XP?
Apple QuickTime 7 works is because. MOV is the Apple
QuickTime format.QuickTime. MOV files can cause problems with Windows Media Player.
And... If you plan to try editing with Movie Maker... the files should
be converted to the. WMV format.No guarantee, but the following decoder might allow Windows Media
Reader to read your. MOV files. Only problem is... it is not freeware to retail.(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)3ivx MPEG-4 5.0.4 decoder
http://store.3ivx.com/3ivxStore/product_details.php?ID=11Convert the. MOV files to the. WMV format may be worth a try:
There are many converters available on the net... some
free... some detail.The following freeware converter is just one example:
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Format Factory (freeware)
http://www.videohelp.com/tools/Format_Factory
(the 'direct link' is faster download)
(the file you want to download is: > FFSetup295.zip<>
(FWIW... installation..., you can uncheck
('all' boxes on the final screens)
(Windows XP / Vista / 7)First, you will need to decompress the file or just open the
Drag > FFSetup295.exe< out="" of="" the="">
and drop it on your desktop. To install left click.Next, after the download and installation of Format
Factory... you can open the program and
left click on the toolbar, the "Option" button and
"Select an output folder to" / apply / OK.
(this is where you find your files after they)
are converted)Drag and drop your video clips on the main screen...
Select "all to WMV" / OK...
Click on... Beginning... in the toolbar...
That should do it...
Good luck
-
No operating system
Hello
I bought a second hand computer and there is no backup of the operating system CD. He had problems with the operating system start so I wiped it, but now I have to re - install.
Would it not possible to obtain another copy of the operating system for that computer?
All the best
Dean
Hello
These are forums for Vista, so vista information is provided
Here are the different ways to reinstall Vista
Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
____________________________________________________________
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer
Ask them of the exact key sequence
__________________________________________________________
or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
____________________________________________________________
How to replace Microsoft software or hardware, order service packs and replace product manuals
-
Hi all
I recently installed a mod for S.T.A.L.K.E.R SoC V1.004. The game won't start not even, instead, it gives me the following message:
This application is not compatible with the operating system installed.
Please upgrade to Windows 98SE, Windows 2000 or more.I'm under Win 8 64 bit. I have uninstalled and rebooted twice (both game and mod) does not.
I have to downgrade to XP to be able to play this awesome mod, he ran on this platform with the same configuration before, why he now rejects it know not only the people at Ms.
Please help if possible
Thank you very much
Pierre Viljoen
Probably, all in all probably is a 16-bit program, and as such does not work on Windows 8.0/8.1 64 bit. In addition, the game seems to have 20 years or more. You can try running in compatibility mode, but I think that the game is dead. Hope this helps and if you need help please post and we will be happy to help you.
The above opinion is mine and casually and does not necessarily reflect that of Microsoft, they are employees. or any other Member of this forum.
"When we try to take anything by itself, we find it hitched to everything else in the universe"-John Muir
-
I use a Mac 10.5.8 and your software says it must be compatible with 10.5, but he says it's not compatible with my operating system. Why?
10.5.8 it is compatible with firefox only with Intel see 10.0:
http://www.Mozilla.org/en-us/Firefox/10.0/system-requirements/
for your ppc mac, the most recent is the version that you have 3.6.26 see:
http://www.Mozilla.org/en-us/Firefox/3.6/system-requirements/
Thank you
Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.
-
El Capitan 10.11.3 is compatible with my operating system? a MacBook Pro (15 inch, late 2011), 2.4 GHz Intel Core i7, 4 GB DDR3 memory at 1333 MHz
Yes.
El Capitan system requirements
https://support.Apple.com/kb/SP728?locale=en_US
Check the compatibility of the application
How to upgrade?
http://www.Apple.com/OSX/how-to-upgrade/
Note:
Computer backup before the upgrade.
El Capitan works better with 8 GB of RAM installed.
-
Can I use PXI embedded controller connected to the PC under LINUX operating system
Hi all
We ara tries to connect to PXI8106 (in 1042 chassis) to PC under LINUX via ethernet (cable cross at the moment), is the version of labview 8.5.
Can I use PXI embedded controller connected to the PC under LINUX operating system?
If Yes, where can I find its configuration in the .ini file?
Thanks in advance.
Hello bachir_elec,
I'm sending you two links that I don't provide the information you need.
Using Linux on an Embedeed PXI controller:
http://digital.NI.com/public.nsf/allkb/821E0C115A3B4EF286257069004B8352?OpenDocument
Configuration of your PXI Linux system:
http://digital.NI.com/public.nsf/allkb/5CEEC941FB7B0488862573F700653B21?OpenDocument
You can take a look?
-
not boot Vista after that computer crashed have a black screen with message operating system not found.recovery discs won't load
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
Above is the way you normally boot from the Vista recovery disks.
If you have tried to boot from the recovery without success disks, contact the manufacturer of your computer.
This isn't their recovery process, Microsoft.
See you soon,.
Mick Murphy - Microsoft partner
-
My analysis is contained in my question.
Basically, I bought Adobe Acrobat 9 and now am unable to operate on my new computer.
Do I have to buy a new version of Adobe Acrobat Pro? It seems that there should be an upgrade, rather than having to buy the product again?
Thank you
~ j
Hi jklebenov,
As I mentioned before that Acrobat 9 is not compatible with your operating system Adobe Acrobat required configuration.
Please use the application in a consistent environment to make it work.
Kind regards
Nicos
Maybe you are looking for
-
HP laser jet 1536 dnf mfp, 2 side by side 2 copies
On 1536 HPLaserJet dnf MFP & MAC w OS10.7.2, how do I copy 2 side Multi Page Doc to 2 side Multi Page copy? lrlgll
-
Click on the button to see the ListField
Hi allPlease help... I don't know what the problemI have two problems.I have the screen where BasicEditField and ButtonField... If I click Show me so ListField. Here is my source code... package com.screen; import java.util.Vector; import com.stepan.
-
Hi all Our customers want to integrate CUCM with CWMS only for the synchronization of users with CUCM but LDAP authentication is disabled. Y at - there any method to inform new users automatically when their account CWMS are created? The feature 'Au
-
complex customer KSOAP of web service with the data type
I had created my client to the web service using ksoap sample. This works very well in the Simulator. Now, I am creating the web service to the complex data type client. For the same thing, I want any heel KSOAP generator tool. Please suggest any too
-
HelloWe have R510 with two processors Xeon and 48GB of RAM. There are 6X8Go modules (3 for each CPU) A1 - A3 and B1 - B3 slots. Original modules are P9RN2 DOUBLE IN-LINE MEMORY MODULE, 1333, and 8 GB 2RX4, 8, 240, R, LOW VOLTAGE I want to add 16 GB (