Very slow (IntelliPoint) wireless mouse

Similar Questions

• Portege R500 boot very slow when wireless

  Hello

  There was a post about it in April, but the only proposed solution was to create two distinct hardware profiles.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=117662

  The laptop is a model of ppr50e-04x048en.
  In the following scenarios, it gives the indicated start-up speed:
  -Switch physical wireless off, network cable connected - Normal
  -Switch physical wireless off, network cable unplugged - Normal
  -Physical wireless switch on, cable connected network - Normal
  -Physical wireless switch on, network cable unplugged - very very slow
  It's so slow that sometimes you don't get bored after 10 minutes of waiting

  There must be a better solution than separate hardware profiles?

  > There must be a better solution than separate hardware profiles?
  Don t think that there is a better solution, it was clearly explained in another view why the laptop does need more to start while the WiFi is enabled.
  If the WiFi is on the phone looking for a possibility to start from the WLan or research for some settings that might be received by WLan.

  On the other hand, you could try updating the BIOS and could check in the WLan card properties-> Advanced tab if there are some settings which could be disabled like Wake up option or similar.

• Very slow printing wireless Photosmart 5524 or do not print

  I bought a HP 5524 (CX047B) yesterday and downloaded the drivers from HP (Photosmart-5520 - series_v12.23.0). Today, it seems that the latest drivers are available for OSX Mountain Lion 10.8.3, so now I use HewlettPackardPrint2.13. I used the uninstall HP program before loading the drivers in both cases. Signal Wi - fi is good (Time Capsule from Apple 4th gen). The printer is intended for use by Mac users on a home network. At the moment it does not work properly.

  I have not tried yet photo printing... I tried to print an e-mail I received (with diagram) using the USB connection, the results are very good. If I feel like using a WiFi print job shows 'print file accepted' in the queue... but nothing happens for 2-3 minutes, and then if I'm lucky the printer produces the header of the email. The printer then displays a message "Cancel" and ends by becoming free.

  So for now, I have a wi - fi network printer that cannot be used f you walk your laptop up to it and use USB.

  (FYI I used an HP B209a-m as a network printer wi - fi for 3 years without problem, until he decides for does not wotk earlier this week). Suggestions please. Clive Parfitt

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• AE CS6 very slow with images

  Hi guys,.

  I use AE Effects CS6 (11.0.4.2) on a new Macbook Pro with these specs:

  Intel Core i5 at 2.8 GHz

  16 GB DDR3 MHz

  Iris 1536 MB Intel

  The problem I have is that, when the imported images are visible in the form of film or a layer, æ becomes very slow to every mouse click on the timeline or images in the viewer itself causing the color wheel to appear, often for 30 seconds both. Strangely, dealing with the composition has no problem.

  Any ideas guys?

  Thanks in advance

  Try transcoding the footage for a codec of production and see if that makes a difference.

  Love, use Adobe Media Encoder to make something like QuickTime with the JPEG codec.

  See if this helps performance.

• Slow flashing red in 3500 Series Microsoft wireless mouse

  Original title: my mouse is weird

  I have a small (3500 version) Microsoft wireless mouse and I just put a new battery in there and all I get is a red light flashing slow... the battery is good... I tested it... any help would be greatly appreciated.  It's probably something really stupid that I'm missing, but I hate that touchpad and I take courses online and rely heavily on the mouse to avoid mistakes... Help!

  Hi Jane,

  There are many reasons why we have a flashing red light on a Microsoft wireless mouse. The mouse software may need an update, you're battery may need to be replaced or recharged, you're wireless device can be connected to a port is non-functional, something can interfere with the wireless mouse.

  Here are some tips you can follow and see if that helps.

  1. download and install the latest drivers for mouse depending on the type of computer http://www.microsoft.com/hardware/en-us/p/wireless-mobile-mouse-3500#support system

  2 a wireless device may interfere with each other. Look at the bottom of your mouse to see if it has a button to synchronize with the receiver. If Yes, press this button. In so doing resync the mouse using a different channel. Turn the receiver upside down or on its side to see if you are able to get a better connection. Remove the other wireless devices, such as a wireless or a cell phone and make sure that the mouse is located at a distance of at least eight inches of a wireless keyboard. Make sure that the mouse is not on a very close to metal objects or metal surface.

  3 try using a mouse instead of using it on a glassy or metallic surface.

  4. ensure that the batteries are inserted correctly. Open battery compartment. Check and remove anything that might obstruct the battery connection. Search corrosion as well and remove, if possible.

  I hope this helps.

• Very slow ARD mouse movements

  When checking my jobs local (same LAN) in ARD in macOS Sierra the mouse movement is very slow, are not smooth at all and the STI jumping cursor.

  This was never the case with ARD in the previous versions of OS X as El Capitan. I use the exact same settings and configuration. Control ARD clients so got very boring now under Sierra.

  Any ideas or others facing the same behavior?

  Thanks for your comments.

  I'm really the only one having trouble with the mouse under ARD here?

  I have a LAN local 1GbE very significant without bottleneck and change the color in ARD in black and white Mode has no influence at all for the risk mouse movement.

• Except if it is started in safe mode, Firefox is very slow; keyboard, mouse, etc.

  When you start Firefox normally the keyboard and mouse input is very slow. The videos are restless with her interruption. Scrolling is almost impossible. When you start in safe mode, Firefox works fine. Internet Explorer works well as Thunderbird. Have
  tried to update Firefox and disabling modules.

  Hello Paulkh, please disable graphics hardware acceleration.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  1. Open the Firefox Options tab as follows, click on the menu button

     

     and select ' Options.
     

  2. In the Options of Firefox tab, click the Advanced tab, and then select general.
  3. You will find in the list of parameters, the checkbox use hardware acceleration when available . Uncheck this box.
  4. Now restart Firefox and see if the problems persist.

  This solve your problems? Please report to us!

  Thank you.

• Given that downloading Firefox, my mouse is sticky and MSN games are hard to play and very slow to download. Any suggestions?

  I checked the system, apparently the mouse works fine. The games are very slow to download, and it is almost impossible to play because the mouse is so slow.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

• How can I solve very slow scrolling with the mouse when you press the command key? (MacBook Pro, Lion, no problem when using trackpad, no problem with other web browsers, other mice have the same problem)

  Scrolling speed is fine, but when you press the command key and then it becomes very slow.

  He does it with a mouse, but not with the trackpad.
  It does when the modules are disabled.
  No problem on Safari or Chrome.
  No problem on PC.

  I think it all started when I went form a MacBook with Snow Leopard on a MacBook Pro with Lion.

  Any help would be much appreciated.

  Thanks in advance!

  You use the mouse wheel to scroll?

  There are some prefs mousewheel, which control the behavior when you press the modifier keys.
  
  You can set the key to the action of each to 0 for normal scroll.

  See http://kb.mozillazine.org/About:config_entries #Mousewheel.

• The magic mouse has suddenly got very slow

  As the title says, my mouse works OK, but the answer is really slow and sometimes the cursor jumps and jerks on.

  I tried to clean it, put new batteries and totally forget and then by reconnecting it to Bluetooth, but it still happens. I even bought another Bluetooth mouse not expensive £10 and it works very well, but obviously this is not as nice as the mouse Magic Mouse from Apple.

  Is - this somethiing to do with El Capitan?

  I am running OSX 10.11.3 on a MacBook Pro (15-inch, mid 2010), 2.4 GHz Intel Core i5.

  Thanks in advance for any help.

  This looks like a problem of interference for me.   You have introduced a new electronic in the vicinity.  Don't forget to turn off your cheap mouse when you do all the tests.   See this document for further assistance.

  http://www.idownloadblog.com/2015/07/25/slow-jumpy-laggy-mouse-cursor-os-x/.

• Satellite L500 - wireless connection is very slow

  Hey all,.

  I have problems with my toshiba satellite L500 wireless very slow. I restored the computer back to factory settings, reset the router and do not know what to do. The only way that I am able to achieve and increase speed of internet is by connecting the laptop to the router.

  There are 3 other laptops in the House which is the same model, this laptop runs very fast. My router is a Thomson TG782T.

  Thank you

  Hello

  First, I would try to update the WLAN driver. Download the latest version on the Toshiba site and then delete the old version. Reboot the laptop and use CCleaner to clean the system. Restart again and now you can install the latest WLAN driver.

  I put t know what operating system you have, but on Vista and Windows 7, you must disable the WLAN energy saving function. You can do this in Windows power management if you change power management.

  I had a similar problem and after removing the energy saving function, it worked fast and normal as on other laptops. :)

• Anatel Sony wireless mouse connects erratically with cursor. Battery life is very good. It also seems

  Anatel Sony wireless mouse connects erratically with cursor. The battery life is very good. The cursor problem also seems to be making the top and down arrows on my wired keyboard. When the cursor is engaged the arrows will work. When the cursor does not connect correctly the arrows do not work. The surace the mouse is on doesn't seem to be a factor.

  
  

• Halo 2:When I use my mouse on the line, the cursor movement is very slow and jerky.

  original title: halo 2

  Hello... Just installed Halo 2 on my Windows 7, 64-bit desktop.  I have all the latest drivers. All other games work fine.

  When I use my mouse on the line, the cursor movement is very slow and jerky. Unplayable.

  I was looking for a patch for the game or suggestion on how to correct adjust them.  I tried the option in game of adjustment of moving the mouse, but it did not help.

  Suggestions please...

  ----------------

• MS Intellimouse Explorer 2.0 has user programmable buttons, but this mouse is very hard to find. Is there an another wireless mouse which has programmable buttons user-defined?

  MS Intellimouse Explorer 2.0 has user programmable buttons, but this mouse is very hard to find. Is there an another wireless mouse which has programmable buttons user-defined?

  Thank you

  OOPS - I just read the description of the site and realize that this is the wrong forum for my questions.

  I'm sorry.

• Download intellipoint from this site for my 3500 mobile wireless mouse?

  I want to download intellipoint to exploit my Magnifier on the 3500 wireless mouse

  You can download the Intellipoint software from the link below:

  http://www.Microsoft.com/hardware/en-us/p/wireless-mobile-mouse-3500#support

  In the link provided click on support and then click on the download button next to "8.2 IntelliPoint 64-bit for Windows 7 (EXE)»