Very slow performance of the HP 15 sleekbook
Hello
Two weeks ago, I bought a HP 15 sleekbook model 15-b171sd with Windows 8 pre installed. The performance has been terribly slow. When I just wanted to open Explorer, well I could grab a cup of coffee. So I booted into the BIOS and choose material control menu. All tests passed, no error not found. Then I thought that it would be installing windows 8 which may not be turned. I got the operating system that has been painful slow. I lasted for hours and hours.
Then, same result, system performance was worse even to switch to the desktop mode and the windows menu of tiles and back 8.
Do you have any tips for me what to do?
Here is a link to the contact for HP options.
The unit is still under warranty, so I would say that as a first point of contact to facilitate the replacement.
Tags: Notebooks
Similar Questions
-
Very slow performance with the Web Client vSphere
I'm testing the vSphere Web Client, but I find it excruciatingly slow - it takes almost 5 minutes just to open a session, and each click after that I take a good load of 30 seconds before the new page is completed. I think I spent a good 10 minutes to total just go to the screen where I could power on a virtual machine, which is something that can been done in less than a minute using the traditional desktop client.
Horribly misconfigured web client somehow?
The following changes improved the performance of the web client of my client. So far, no more hung tasks, navigation in the console of the web client has been improved. We are always monitoring well.
Has increased the heap size JVM of vSphere Web Client to 3 GB. Used the following KB KB VMware: settings of the configuration in VMware vCenter Server 5.1 and 5.5 Tomcat server
-
Satellite T110-11U: WLan connection dropped and very slow performance
Hi people,
I use a Satellite T110-11U running windows 7 Home premium.
After having initially was very satisfied with its use, it now becomes more and more frustrating to use with wifi, with connections dropped and very slow performance.
I have updated the BIOS and think I have updated all drivers wirelss, but could be the problem. It seems that wireless, software of management is at fault because the networks are detected, but not clinging.
Any suggestion or tips to try will help save my sanity!
Thanks for your help.
John
> have updated the BIOS and think I have updated all drivers wirelss, but could be the problem.
If you need to make sure that you use the latest WLan driver.
The driver can be downloaded here:
http://APS2.toshiba-tro.de/WLAN/The laptop uses the Realtek RTL8191SE of WLan card.
Please also reset the settings of the Wlan router. I had a lot of problems with my WLan and after the reset of the router, performance problems disappeared. -
Very slow to launch the desktop files/programs
I have a Tecra M3 which fails to launch programs on the desktop and also takes a long time to open the fom navigating the start menu selections. We have created new profiles for the user, delete the old one, installed more memory, cleaned and the temptation of power the disk, but still the same problem of ave.
Can anyone suggest a solution? Thank you
Hello
It is not easy to give you a proper answer to that kind of question because we don't know how to use this device is installed and configured. Everything that you already made, it is good, but you can try to check the Task Manager and all running processes. It is possible that some processes running in the background, slow performance of the unit as an anti-virus program.
I had the same situation my Satellite P0.
Good bye
-
I've updated my xperia neo to andriod 4.01, my laptop is now very slow, how do the previous version of andriod?
you have 2 options
(1) bring it to a Sony repair center
http://www.sonymobile.com/global-en/support/contact-us/
or
(2) use flashtool for downgrade
Don't forget to mark the correct answers & useful answers
-
Original title: I have a BIG problem!
When I start my computer I is no longer able to enter my tab start. It is empty. When I shoot computer (search) it says that I have nothing. All files have been deleted! A program called OnPay, Inc. (USA) check my computer using the recovery of files. OnPay, Inc. says that it is a system utility. It is capable of S.M.A.R.T. (so it says). I used to have Microsoft Security Essentials, but my computer can't find it. When I go on the Internet or in another file, a Service Manager window pops up saying that t8EXTPEx.dll is missing or still missing. This program of OnPay, Inc. just wants me to buy their service - but won't give me their price. Windows Security Center can't be started is another message that I get. I also get the window that Windows Defender encountered error 0 x 80070424. The specified server does not exist as an installed service. Help! My computer is very slow. I have Internet through pdli.net (Pioneer). My email address is: * address removed privacy e-mail. *
I hope that I'm not a lost cause! Thank you very much for your help!
Jan Bornemann
Address removed from electronic privacy. *
Phone number removed for privacy protection *.
Hello
Method 1:
I suggest to go through the steps from the link provided and check if it helps.
Levonorgestrol error 0 x 80070424 when you use Windows Update, Microsoft Update, or Windows Firewall
http://support.Microsoft.com/kb/968002
I also suggest you to start the computer in safe mode with network and run a full scan using the Microsoft Safety Scanner and check.
Method 2:
Step 1:
Start your computer in safe mode with networking;
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Step 2:
Scan the computer by visiting the link below:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.
Hope this helps and keep us posted.
-
Very slow performance of my Macbook
Hello
My MacBook is very slow. It is still slow when I'm browsing with Safari.
I have no intention of buying additional RAM but want to tune up.
Someone could analyze the report I had running EtreCheck and give me advice how I could improve it?
Thanks in advance and here is the report:
EtreCheck version: 2.9.12 (265)
Report generated 2016-06-10 21:53:26
Download EtreCheck from https://etrecheck.com
Time 05:52
Performance: Below average
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Problem: Computer is too slow
MacBook (13-inch, aluminum, late 2008)
[Data sheet] - [User Guide] - [warranty & Service]
MacBook - model: MacBook5, 1
1 2.4 GHz Intel Core 2 Duo CPU: 2 strands
2 GB RAM - Insufficient RAM! Extensible - [Instructions]
BANK 0/DIMM0
ok 1 GB DDR3 1067 MHz
0/DIMM1 BANK
ok 1 GB DDR3 1067 MHz
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 214
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1280 x 800
OS X Yosemite 10.10.5 (14F1904) - since startup time: less than an hour
TOSHIBA MK2555GSXF disk0: (250,06 GB) (rotation)
EFI (disk0s1) < not mounted >: 210 MB
Macintosh HD (disk0s2) /: 249,20 (Go 191,92 free)
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
HL-DT-ST DVD - RW GS21N)
Built-in ISight from Apple Inc..
Apple Inc. Apple keyboard / Trackpad
Computer, Inc. Apple IR receiver.
Apple Inc. BRCM2046 hub.
Apple Inc. Bluetooth USB host controller.
Mac App Store and identified developers
/ Library/Application Support/VirtualBox
[loading] org.virtualbox.kext.VBoxDrv (4.3.10 - 2016-06-07) [Support]
[loading] org.virtualbox.kext.VBoxNetAdp (4.3.10 - 2016-06-07) [Support]
[loading] org.virtualbox.kext.VBoxNetFlt (4.3.10 - 2016-06-07) [Support]
[loading] org.virtualbox.kext.VBoxUSB (4.3.10 - 2016-06-07) [Support]
[loaded] 4 tasks Apple
[loading] 148 tasks Apple
[operation] 60 tasks Apple
[failure] com.apple.Kerberos.digest - service.plist
com.apple.Kerberos.kdc.plist [failure]
[loaded] 47 tasks Apple
[loading] 137 tasks Apple
[operation] 75 tasks Apple
[failure] com.teamviewer.teamviewer.plist (2016-06-10) [Support]
[failure] com.teamviewer.teamviewer_desktop.plist (2016-06-10) [Support]
[loading] org.macosforge.xquartz.startx.plist (2012-06-01) [Support]
[loading] com.adobe.fpsaud.plist (2016-05-09) [Support]
[loading] com.teamviewer.Helper.plist (2016-01-07) [Support]
[failure] com.teamviewer.teamviewer_service.plist (2016-06-10) [Support]
[loading] org.macosforge.xquartz.privileged_startx.plist (2012-06-01) [Support]
org.VirtualBox.startup.plist [no charge] (2016-06-07) [Support]
com.apple.FolderActions.enabled.plist [no charge]
com.apple.FolderActions.folders.plist [loading]
org.VirtualBox.vboxwebsrv.plist [no charge] (2016-06-07) [Support]
[loading] 369 tasks Apple
[operation] 150 tasks Apple
FlashPlayer - 10.6: 21.0.0.242 - SDK 10.6 (2016-03-17) [Support]
QuickTime Plugin: 7.7.3 (2016-06-10)
Flash Player: 21.0.0.242 - SDK 10.6 (2016-03-17) [Support]
iPhotoPhotocast: 7.0 (2010-11-02)
Default browser: 600 - SDK 10.10 (2016-06-09)
Flash Player (2016-05-09) [Support]
Time Machine not configured!
40% syncdefaultsd
3% launchservicesd
2% safari
com.apple.WebKit.WebContent (3) 2%
kernel_task 2%
Top of page process of memory: ⓘ
457 MB com.apple.WebKit.WebContent (3)
Kernel_task 220 MB
Safari of 68 MB
WindowServer 41 MB
37 MB App Store
49MO RAM free
1.95 used GB RAM (448 MB cache)
Used Swap 0 B
10 June 2016, 21:17:52 self-test - spent
June 10, 2016, 21:11:32 /Library/Logs/DiagnosticReports/Safari_2016-06-10-211132_[redacted].hang
/Applications/Safari.app/Contents/MacOS/Safari
June 9, 2016, 02:29:43 /Library/Logs/DiagnosticReports/installd_2016-06-09-022943_[redacted].cpu_resou rce.diag [details]
/System/Library/PrivateFrameworks/PackageKit.framework/resources/installd
Wow, proof that Yosemite - can - run on only 2 GB of memory. I had not thought that it was possible in the real world.
If you are serious about not not upgrade the RAM I would recommend uninstalling/disabling the Flash Player and possibly disable Java Script as well. WEBCONTENT is currently the #1 drain resource on your mac, in order to prevent intensive pieces more than memory of the internet of the race should improve performance throughout the system. Usually I also recommend also downgrade to a less intensive old OS version resources such as the Mavericks or Mountain Lion, but given that you must have been to Yosemite for months I guess it works for you.
-
Qosmio G30-126 (PQG32E) - very slow performance of HARD drive
I have improved my Qosmio G30 126 at 4 GB of Ram, SSD 64 HDD as windows7 boot partition and 500 GB 7200 64cache HARD drive as drive HARD secondary but I have a very slow HARD drive performance when working in windows7, but when I work on a virtual machine Windows XP, the disk HARD perforemance is fine.
I've upgraded all drivers from toshiba.com for windows7 ultimate 32-bit drivers including drivers from the chipset intel but my problem is not solved. I also check all other performance issues and its OK.
The same problem exsists on my old HARD drive on Windows Vista Ultimate 32-bit and Windows 7 ultimate 32 bit.
I used HD tune software to check my HARD drive it accelerates gives about 100bps in windows 7 for my SSD and it gives 285mbps (this is the actual read speed) in the machine virtual Windows XP and the actual speed is significantly different.
Please tell me what to do because I suffer from my laptop very slow and spend a lot of mony on it without more.
Hello
To be honest it is really hard to tell why you have slow HARD drive performance but especially it s associated with a large number of programs they are running in the background. How many processes are started after Windows starts?
Also, the antivirus program may affect the performance of the computer. I would recommend using the AntiVir freeware tool and the Windows Firewall. That's enough if keep you Windows up-to-date and use a new Internet browser.
Also check the other discussions of the forum on the slow performance. You can find a lot of useful tips to improve performance. For example:
-Defragment HARD drive
-Disable the startup programs you don't need
-Uninstall unnecessary programs
-Run the CCleaner tool to remove old registry keys -
Equium A100-338 has started to go very slow after using the recovery CD
I used the recovery CD after my Equium A100-338 has started to go very slow, it still seems slower than it used to be.
I haven't added anything to the computer from the CD recovery and verified the Manager tasks to see if I could spot anything suspicious.Statistics say, use 18-22% CPU, but the physical memory is about 68% is this normal or should it be less?
Is there a list of standard processes I can check against mine to see if its doing something, it shouldn't be?
Thank you
Hello
I think you feel that unity is a bit slow due to the high amount of different processes that run in the context of the BONE.
The fact is that your laptop supports various features such as buttons FN, Toshiba control buttons, etc.
All this has needs drivers.In addition, as I m not wrong the Norton Internet Security has been installed on your system.
It s part of the image of Toshiba and this tool could affect the performance of the system.I have used in the past, but now changed to another application that doesn t need a lot of material resources.
So if you want you can disable or delete some of the tools and utilities that are not important to you and could clean the system using a 3rd third party tool called CCleaner
Welcome them
-
Satellite A505-S6030 - very weak performance in the moving files and folders
Hello
My problem is the speed of copying files from the laptop to the usb device and versa
When I copied about 5 gega file it takes more than 12 minutes to transfer to the usb device... He started at 20 MB/sec so it keep more slow until it become 5 mb/sI dono if the thing copy depends on the memory or processor, but it the big two in this portable 4 gega ram it was just 1.4 use when copying and core i7 performance I see in the Manager of tasks it is 1% cpu usage... so I don't know where the problem is in this file of very slow copy... Please help : S
'Sorry for my bad English'... .and please send me notification if the admin is going to pass this subject from another section in the site becauz I really don't know where I should write down it
Thank you very much :D
Perhaps, there is a lot of activity on the laptop while the files are moving the HARD local to another external drive.
The same thing happens to me when I copy movies on external HARD drive. If I leave it and don t touch anything move/copy turns faster. When I'm doing something at the same time the transfer will be slow. -
Computer is very slow, especially at the start
Original title: is there a list of commands I can get help on this computer?
I know msconfig, but are there more orders I can do things like own regulations to do my comp. running faster. Its very slow especially on start-ups. Thank you
Hello
You did changes to the computer before this problem?
Microsoft does not recommend the use of any registry cleaning software because any incorrect registry entry might prevent your computer from starting properly.
Try to perform the clean boot on the computer.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Reference:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on start and then click Run.
2. type msconfig and click OK.
The System Configuration Utility dialog box appears.
3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer.See the following articles that might help you to improve the performance of the computer.
Slow PC? Optimize your computer for peak performance
http://www.Microsoft.com/athome/Setup/optimize.aspxHow to make a computer faster: 6 ways to speed up your PC
http://www.Microsoft.com/atwork/maintenance/speed.aspxMaintenance tasks that improve performance
http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/maintenance-improve-performanceLet us know if this helped.
-
Very slow performance with Windows 7 on i7 Quad
I bought my wife a Lenovo E530 i7 quad with screen 1600 x 900 and running Win 7 in September 2012. Previously, she had an Asus Core 2 Duo also with Win 7. The laptop is used to picture (scanning, editing, cataloging) work, family, the navigation and email history.
The E530 was desperately slow at the beginning. Not better, not faster than the Asus. Performance seems to vary from slow to excruciatingly slow.
Features include:
-very slow to open programs
-slow to react to the choice of menus and clicks
-slow to react to the touchpad
-scrolling is not smooth, vibrates, much worse than Asus
-often distorts the sound and video, audio stutters
-IE9 make often video has properly - green band across the bottom with the rest of the colors shifted upward - change the video quality will fix it sometimes
-very slow internet response compared to the other machines on the same network of navigation.
However, startup speed seems to be OK.
I spent weeks (months?) through the forums, verification of updates, deletion and restoration of various programs and drivers looking for driver clashes. I tried the clean boot with only Windows drivers and various other combinations, and it made no difference.
For a long time wifi would be max 54 Mbps but somewhere through the process he begins to operate at up to 300Mbps.
Nothing seems to stand out in reports on health of the system and the event viewer. Windows experience scores seem to be everything I expected from my older i7.
Resources and performance monitor reports a problem with the hard drive:
The average disk queue length = Max 16 = 106
%Idle = 0
Disk read/s Ave = 0.093 Max = 3
Disk sec/Transfer Ave = 0,067 Max = 1
Disk s/write = 0.022 Ave
Even when the computer runs slower the CPU usage, and memory usage is not mounted and ceiling ever.
SFC report any breach of integrity.
FixIt MS - slow performance does not detect any problems.
The disk check is not a problem any.
It's so frustrating that my wife threatens to throw it in the trash and buy a Mac (the horrors :-)).
Any ideas on what I might have missed or what I should look at?
Thank you
Ken
Ken
Wish I had a 128 GB SSD. I suppose you see a serious helping hand to the performance of the system.
Please do not forget to mark the answer.
-
Very slow to open the components Panel
The site I am building a lot of image assets. Whenever I open the active panel, it takes a minute or more to open. I use a macbook pro retina 2015 with 16 GB of ram and a processor i7. All other applications work like a charm, but Adobe Muse really needs a lot of work in terms of stability and performance. The new version is especially very slow. I think Adobe Muse needs to work on the bug fixes and performance at this stage and constantly release new features first.
Hi Preran,
In fact, I have download the latest version last night and I am pleased to announce that the question was indeed fixed in this new construction. Kudos to the team for a job well done! This is good progress. But the active panel still need a lot of work. I have not to mention them here and create a new thread for this private place in the beta program. Thanks for your help!
-
Very slow performance after P2V
Hi all
We did a P2V of a server and after his conversion, he must have very high use of the processor and extremely slow performance as a virtual machine. We did it,
1. all cleanings after P2V.
2. VMware tools update.
3. an increase in the CPU, RAM.
Nothing seems to work, any help please.
Thank you
Please confirm that you have removed the old equipment after P2V and all related material linked from the drivers, utilities, officials.
1. open a Windows command prompt and type the following command:
set devmgr_show_nonpresent_devices=1
This sets an environment variable that tells the Device Manager to display all the devices.
2. at the same command prompt, type
devmgmt.msc
You can also try to run msconfig and disable microsoft non-related services to help you identify what could be the cause of the problem.
- On the Services tab
- Select "Hide all Microsoft Services"
- Click on "disable all".
- Mark the VMware vCenter Converter Agent
- Mark the VMware vCenter Converter Server
- Click 'apply '.
- Click "close".
- Click "restart."
-
EBS 11i AutoInvoice very slow Performance
Hi all
EBS 11i
Oracle 9.2.0.6 32-bit
AutoInvoice transfer program has been listening to the bottom of the company, a bad start for 2013. Please help for this serious problem :(
Attached is the report "STATSPACK" for slow performance time.
... more... > http://www.datafilehost.com/download-60d3df1e.htmlSTATSPACK report for DB Name DB Id Instance Inst Num Release Cluster Host ------------ ----------- ------------ -------- ----------- ------- ------------ OAPROD 4204192100 OAPROD 1 9.2.0.6.0 NO oel5.prod e.local Snap Id Snap Time Sessions Curs/Sess Comment --------- ------------------ -------- --------- ------------------- Begin Snap: 551 02-Jan-13 22:00:04 123 59.1 End Snap: 553 03-Jan-13 00:00:02 97 48.7 Elapsed: 119.97 (mins) Cache Sizes (end) ~~~~~~~~~~~~~~~~~ Buffer Cache: 288M Std Block Size: 8K Shared Pool Size: 288M Log Buffer: 10,240K Load Profile ~~~~~~~~~~~~ Per Second Per Transaction --------------- --------------- Redo size: 54,437.02 65,579.53 Logical reads: 2,053,336.52 2,473,626.15 Block changes: 383.39 461.86 Physical reads: 43,270.67 52,127.57 Physical writes: 46.63 56.18 User calls: 35.83 43.16 Parses: 25.53 30.76 Hard parses: 0.18 0.21 Sorts: 186.25 224.38 Logons: 0.08 0.10 Executes: 108.76 131.02 Transactions: 0.83 % Blocks changed per Read: 0.02 Recursive Call %: 85.81 Rollback per transaction %: 3.18 Rows per Sort: 3.77 Instance Efficiency Percentages (Target 100%) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Buffer Nowait %: 99.99 Redo NoWait %: 99.98 Buffer Hit %: 97.90 In-memory Sort %: 100.00 Library Hit %: 99.87 Soft Parse %: 99.31 Execute to Parse %: 76.52 Latch Hit %: 99.96 Parse CPU to Parse Elapsd %: 37.01 % Non-Parse CPU: 99.98 Shared Pool Statistics Begin End ------ ------ Memory Usage %: 95.13 94.82 % SQL with executions>1: 83.58 95.42 % Memory for SQL w/exec>1: 79.28 92.57 Top 5 Timed Events ~~~~~~~~~~~~~~~~~~ % Total Event Waits Time (s) Ela Time -------------------------------------------- ------------ ----------- -------- CPU time 74,717 84.80 latch free 181,788 8,101 9.19 db file scattered read 47,546,136 2,893 3.28 db file sequential read 23,092,208 2,006 2.28 buffer busy waits 1,812,920 193 .22 ------------------------------------------------------------- ^LWait Events for DB: OAPROD Instance: OAPROD Snaps: 551 -553 -> s - second -> cs - centisecond - 100th of a second -> ms - millisecond - 1000th of a second -> us - microsecond - 1000000th of a second -> ordered by wait time desc, waits desc (idle events last) Avg Total Wait wait Waits Event Waits Timeouts Time (s) (ms) /txn ---------------------------- ------------ ---------- ---------- ------ -------- latch free 181,788 180,378 8,101 45 30.4 db file scattered read 47,546,136 0 2,893 0 7,957.5 db file sequential read 23,092,208 0 2,006 0 3,864.8 buffer busy waits 1,812,920 2 193 0 303.4 log file switch (checkpoint 124 51 69 560 0.0 log file parallel write 21,251 0 39 2 3.6 log file sync 4,072 0 21 5 0.7 control file parallel write 3,061 0 12 4 0.5 library cache load lock 5 2 9 1806 0.0 log file switch completion 54 6 8 148 0.0 PX Deq: Execute Reply 7,268 0 6 1 1.2 PX Deq: Signal ACK 297 103 6 21 0.0 PX qref latch 310 279 5 16 0.1 PX Deq: Msg Fragment 4,301 0 4 1 0.7 PX Deq Credit: send blkd 1,256 0 2 2 0.2 PX Deq: Parse Reply 267 0 2 7 0.0 process startup 46 0 2 39 0.0 PX Deq: Table Q Sample 84 0 2 22 0.0 library cache pin 337 0 1 4 0.1 kksfbc child completion 116 76 1 11 0.0 write complete waits 2 1 1 491 0.0 PX Deq: Join ACK 212 0 1 4 0.0 SQL*Net break/reset to clien 2,152 0 1 0 0.4 enqueue 80 0 1 7 0.0 db file parallel read 38 0 0 13 0.0 SQL*Net more data to client 24,272 0 0 0 4.1 log file single write 160 0 0 2 0.0 PX Deq: Table Q qref 62 0 0 4 0.0 control file sequential read 4,336 0 0 0 0.7 direct path read 45,818 0 0 0 7.7 library cache lock 1 0 0 76 0.0 direct path write 22,821 0 0 0 3.8 LGWR wait for redo copy 5,387 0 0 0 0.9 PX Deq Credit: need buffer 206 0 0 0 0.0 undo segment extension 40,035 40,028 0 0 6.7 db file parallel write 3,904 0 0 0 0.7 db file single write 40 0 0 0 0.0 log file sequential read 160 0 0 0 0.0 async disk IO 40 0 0 0 0.0 SQL*Net message from client 269,626 0 337,613 1252 45.1 pipe get 5,313 5,286 21,063 3964 0.9 queue messages 1,466 1,464 14,023 9566 0.2 wakeup time manager 239 238 6,738 28191 0.0 PX Idle Wait 3,475 3,042 6,026 1734 0.6 jobq slave wait 961 960 2,824 2939 0.2 PX Deq: Execution Msg 9,423 1 159 17 1.6 PX Deq: Table Q Normal 1,362 4 8 6 0.2 SQL*Net more data from clien 12,643 0 2 0 2.1 SQL*Net message to client 269,616 0 0 0 45.1 ^LWait Events for DB: OAPROD Instance: OAPROD Snaps: 551 -553 -> s - second -> cs - centisecond - 100th of a second -> ms - millisecond - 1000th of a second -> us - microsecond - 1000000th of a second -> ordered by wait time desc, waits desc (idle events last) Avg Total Wait wait Waits Event Waits Timeouts Time (s) (ms) /txn ---------------------------- ------------ ---------- ---------- ------ -------- ------------------------------------------------------------- ^LBackground Wait Events for DB: OAPROD Instance: OAPROD Snaps: 551 -553 -> ordered by wait time desc, waits desc (idle events last) Avg Total Wait wait Waits Event Waits Timeouts Time (s) (ms) /txn ---------------------------- ------------ ---------- ---------- ------ -------- log file parallel write 21,251 0 39 2 3.6 latch free 407 353 13 32 0.1 control file parallel write 2,981 0 12 4 0.5 db file scattered read 3,464 0 5 1 0.6 db file sequential read 1,756 0 2 1 0.3 rdbms ipc reply 137 0 2 16 0.0 log file single write 160 0 0 2 0.0 enqueue 17 0 0 6 0.0 control file sequential read 3,346 0 0 0 0.6 LGWR wait for redo copy 5,387 0 0 0 0.9 db file parallel write 3,904 0 0 0 0.7 direct path read 1,833 0 0 0 0.3 direct path write 1,833 0 0 0 0.3 log file sequential read 160 0 0 0 0.0 buffer busy waits 21 0 0 0 0.0 rdbms ipc message 41,753 9,476 33,069 792 7.0 pmon timer 4,438 2,164 7,021 1582 0.7 smon timer 522 1 6,820 13064 0.1 ------------------------------------------------------------- ^LSQL ordered by Gets for DB: OAPROD Instance: OAPROD Snaps: 551 -553 -> End Buffer Gets Threshold: 10000 -> Note that resources reported for PL/SQL includes the resources used by all SQL statements called within the PL/SQL code. As individual SQL statements are also reported, it is possible and valid for the summed total % to exceed 100 CPU Elapsd Buffer Gets Executions Gets per Exec %Total Time (s) Time (s) Hash Value --------------- ------------ -------------- ------ -------- --------- ---------- 5,636,117,159 28 201,289,898.5 38.1 ######## ######### 835260576 Module: RAXTRX INSERT INTO RA_INTERFACE_ERRORS (INTERFACE_LINE_ID, MESSAGE_ TEXT, INVALID_VALUE) SELECT INTERFACE_LINE_ID, :b_err_msg6, ' trx_number='||T.TRX_NUMBER||','||'customer_trx_id='||TL.CUSTOMER _TRX_ID FROM RA_INTERFACE_LINES_GT IL, RA_CUSTOMER_TRX_LINES TL, RA_CUSTOMER_TRX T WHERE IL.REQUEST_ID = :b1 AND IL.INTERFAC 511,626,129 20 25,581,306.5 3.5 8155.90 15045.56 205460129 Module: JDBC Thin Client select TRANSACTION_BRANCH , BRANCH_ADDRESS_1 , BRANCH_ADDRESS_2 , BRANCH_PHONES , BRANCH_FAX , BRANCH_TIN , TRX_NUMBER , TRX_NU MBER_DISP , TRX_DATE , TRX_DATE_DISP , BILL_TO_CUSTOMER_ID , BIL L_TO_CUSTOMER_NAME , SHIP_DATE_ACTUAL_DISP , SHIP_TO_NAME , SHIP _TO_ADDRESS1 , SHIP_TO_ADDRESS2 , SHIP_TO_ADDRESS3 , SHIP_TO_ADD 114,013,000 8,544 13,344.2 0.8 2919.47 4527.54 803969757 Module: JDBC Thin Client SELECT COALESCE(DELV_ADDR.CITY, DELV_ADDR.PROVINCE) FROM APPS.OE _ORDER_HEADERS_ALL OE_HEADERS , APPS.RA_SITE_USES_ALL DELV_SITE , APPS.RA_ADDRESSES_ALL DELV_ADDR WHERE TO_CHAR(ORDER_NUMBER) = :B1 AND DELV_SITE.SITE_USE_ID(+) = OE_HEADERS.DELIVER_TO_ORG_ID AND DELV_ADDR.ADDRESS_ID(+) = DELV_SITE.ADDRESS_ID 113,972,897 8,550 13,330.2 0.8 2924.20 4550.22 3761220362 Module: JDBC Thin Client SELECT DELV_ADDR.ADDRESS1 FROM APPS.OE_ORDER_HEADERS_ALL OE_HEAD ERS , APPS.RA_SITE_USES_ALL DELV_SITE , APPS.RA_ADDRESSES_ALL DE LV_ADDR WHERE TO_CHAR(ORDER_NUMBER) = :B1 AND DELV_SITE.SITE_USE _ID(+) = OE_HEADERS.DELIVER_TO_ORG_ID AND DELV_ADDR.ADDRESS_ID(+ ) = DELV_SITE.ADDRESS_ID 113,972,850 8,551 13,328.6 0.8 2919.13 4533.69 4273350236 Module: JDBC Thin Client
If this download file...
Uncheck the [use our Download Manager and download recommended downloads
Your help is very appreciated.
Thank you very much
Janyxes2013 wrote:
Thanks again,Users are complaining that applications oracle is suspended although few users use only as 4 users, and sometimes even no one is using it... so weird. Can it
be caused by simultaneous on-demand batch running background?It is possible, and it depends on what simultaneous programs are underway.
How can I enumerate all running simultaneous tasks?
Query FND_CONCURRENT_REQUESTS - http://etrm.oracle.com/pls/trm11510/etrm_pnav.show_object?c_name=FND_CONCURRENT_REQUESTS&c_owner=APPLSYS&c_type=TABLE
Simultaneous treatment - what are the meanings of the Codes in the STATUS_CODE and the PHASE_CODE FND_CONCURRENT_REQUESTS Table columns? [152209.1 ID]
Thank you
Hussein
Maybe you are looking for
-
Satellite Pro U400 - 150 - display has stopped working
Hello guys,. yesterday I used to turn on my laptop (Satellite Pro U400 - 14) and it worked fine but after 1 minute my screen stopped working. I tried to restart the PC, and it worked OK again. But I turn on my laptop today and it didn t work at all.
-
Satellite A200 PSAF3A - ccreen goes black after installing the graphics driver
Hello. I have a Toshiba Satellite A200 which has the video adapter Mobile Intel (r) 965 Express Chipset Family (256 MB). I bought my computer in Australia and is the SATELLITE A200 (PSAF3A-08202D) with Windows XP.The computer began to be very slow, a
-
Hi, please I forgot my bios password for hp mini 110, the model is CNU9214HQW
-
Printing of A4 e-all-in-one printer, HP Photosmart 5520
Hello I try to print in A4 format, but my 5520 does not have this facility. Any help would be welcome. I don't see what I'm doing wrong, I have changed to plain paper but still do not see an option A4. Thank you
-
Installed an application, not the reader CD is not working properly.
Displacement of title: pilot original Add and application that had and effects on the CD player function. Since application was uninstalled, but the CD player is always affected. Image of the number is transferred to: https://skydrive.live.com/?sc=