Similar Questions

• Data of the monitoring report: FSMService

  Hi all
  I have successfully build different services with the host group. I can see the details of the Service with the content engine virtual and everything seems fine. But when I now try to run a report using the monitoring: FSMService as a context parameter, for example the Module VMware Virtual Machines configuration report, I have all shown data if I use one of my construction services.
  If I use the build already in virtualization Service, it shows me all the VMS, but my goal was to report according to the accumulation of services with the Service constructor. Could this be something tha service accumulate shows machines (host)?
  Help, please.
  Kind regards
  hEINER
  SystemInfo: vFogLight 6.5 on Windows Server 2008 R2 64 bit

  Hello hEINER,.
  My suggestion would be to open a support case to diagnose the issue further.
  Concerning

• Windows Event Viewer point can be alerted through Vfoglight?

  Is there a way you can take the critical event of a server virtual windows server and create alerts vfoglight for them?

  This can be done with the cartridge of the OS. Take a look at this blogpost to learn more on this subject: http://en.community.dell.com/techcenter/virtualization/infrastructure/b/storage-blog/archive/2014/02/25/vfoglight-physical-host-monitoring

• Assessment of vFoglight vs Veeam One - newbie questions

  HI -.

  IM evaluate vFoglight vs Veeam One in our VMware environment, and I have a few questions I can't fix.

  -J' I need to display all data warehouses with an option for a provisioning (how well stocked and how is used/free). I couldn't find this option.

  It is there a way to a top list of VMS with Active snapshots?

  -Is it possible to create the service in vFoglight (non-administrative) users, who can monitor only VMS I decide?

  -What excactly is the difference between Standard VoP and vFoglight (Enterprise version), and why do I need both?

  Kind regards

  Bjørn Tore

  Hi Bjern-Tore

  1.) here is a link that will tell you how to proceed: http://en.community.dell.com/techcenter/virtualization/infrastructure/b/storage-blog/archive/2012/03/28/thin-provisioning

  2.) If you go to the reports, there is a snapshot report open. This will tell you your shots.

  3.) Yes, there are many roles that can be defined. You can link these roles Auditors AD. Under the houses, go to Administration, user and security management...

  (4) the difference is VoP Server Standard is a virtual solution, that can help with capacity Mgt, optimization/Automation, Chargeback. vFoglight business means you get VoP, more features vFoglight vFoglight - with detailed reports, dashboards, analysis of performance depth - are more than one business control solution - you can also monitor storage, AD, Exchange, databases, networks, physical servers, you can see inside the guest o/s. Throughout with a single window.

  Kind regards

  Kevin

• Service monitoring on virtual machines in windows

  Hi people,

  We recently bought VFoglight and also NMS.how (with what I bought) if I monitor the status of windows services? -i.e. can I follow specific (or all automatic) services and warning of the they change order?  Is this doen via the infra cartridge as it would be easier than having to alos use a NMS agent on each server.

  All advice appreciated!

  Thanks in advance.

  Hey Davie,

  If you see this - http://edocs.quest.com/foglight/563/doc/Cartridge/InfrastructureCartridge/UsingTheCartridge.02.4.php

  You can see the agent properties different (accessible from the Administration-> the State of the Agent). Click on your WindowsAgent agents in the list and change the properties.

  The drop-down menu to "Collect measures of Service" has a few options for all, no or specified.

  The rule of "HostServiceRestart", generates an email if a monitored service is stopped and an agent is configured to restart. It is disabled by default.

  The rule "HostServices" generates an alarm and sends an email if a host service changes its status. If it changes to run anything else, it generates a warning alert.

  Hope that helps,

  -Darren

• vFoglight - moving the database to another SQL Server

  Hello

  We are moving our vFoglight to a SQL Server database to another SQL (production version) server.  I changed the server/instance name in the foglight.config file to point to the new server and instance and restarted the service (and eventually rebooted as well).  However, vFoglight no longer works.  Is there another step necessary to make it work?

  Any help would be appreciated.

  See you soon,.

  Mark

  Hello Mark,

  We have to examine FMS log and SQL server log to see what error is to jump, but as a quick check you can check that the server authentication is set to SQL Server and Windows authentication mode in the security settings of your instance of SQL Server.

  Concerning

• process control of a host linux in vFoglight

  Hello:
  I am currently able to monitor the process for my Windows VMS by following these steps:
  VmExplorer open
  Expand virtual machines under topology
  Click the virtual machine, and then click the process tab
  Click the Configuration Wizard to host and run the wizard enter the administrator username and password and you sure
  Windows is the chosen operating system and ensure the collection of processes enable for this host is checked. Click Next. Make sure that WMI is checked.
  And then you click on finish. In about 15 minutes, I am able to see the processes running on the computer, etc.. I don't need to install a
  Foglight agent components.

  Now when I try and do the same thing with a linux host, that I'm not always able to see one of the running processes. To the linux host I follow these steps:
  VmExplorer open
  Expand virtual machines under topology
  Click the virtual machine, and then click the process tab
  Click the Configuration Wizard to host and run the wizard by entering in the root username and password and you sure
  Linux is the chosen operating system and ensure the collection of processes enable for this host is checked. Click Next. Make sure that the
  SSH port is set to 22. Click Next. And then you click on finish. After waiting for a long time, nothing never appears. I am able to ssh to this virtual machine
  of all over my network.

  So, it is possible to monitor the process in a Linux VM (without having to install an agent) as I can monitor a Windows VM?

  Thank you.

  Mark

  SSH enabled for the root user?
  If you go on the dashboard of the comment process within the vFoglight console (left under Homes Board) see you alarms in the upper right?
  If so, say the alarm?
  Can solve you the VM name that is presented in the machine vFoglight vFoglight? If the name is larry.mydomain.com in the vFog console, I need to make sure that I can ping and resolve this computer of the machine vFog.
  -Larry

• vFoglight, vRanger connection & vCenter

  Hi all.
  We have recently updated our virtual environment for vSphere 4U1 with 6 blades connected in vCenter ESX.
  We currently have vRanger connection and vCenter installed on the same physical machine attached to the San. He is currently a backup ok.
  My question is that we now intend to run vFoglight. I read that vFoglight love using as many resources as it can get, and it is recommended to install it on its own box. If none of the scenarios are considered as 'ok' to do?
  1. install the three products (vCenter, vRanger connection, vFoglight) on the same physical machine.
  2. install vCenter and vFoglight on the same machine physics and vRanger connection on a virtual machine.
  3. install vRanger connection and vCenter on the same physical box (essentially a backup box) and on its own virtual vFoglight.
  4. all the separate (and if yes, the best being in the physical box). (it can't really as I'm trying to consolidate servers)
  I hope someone can enlighten us on this one and I can make it work.
  Bravo for that.
  Concerning
  Feng

  Hi AuscoIT...
  (1) No, don't do it. You will be pointing out the machine with all three products running on it too.
  (2) is not recommended either, as vCenter performs many vital operations (taking snapshots, the migration of virtual machines, cloning, HA, etc.), and the last thing you want is vFoglight "hungry" this machine of the resources he needs.
  (3) is not recommended either, although I've seen it before. This, in my mind, creates an unnecessary risk, as if you lose your VC machine, you also lose connection vRanger machine, etc., and it would inhibit your effort of DR.
  (4) If you require on SAN backups, you must have vRanger connection on a physical machine. You could 'make do' with the #3 configuration, but once again, several reasons not to do. The physical machine connection vRanger doesn't have to be ultra powerful, if, then perhaps you could get in with a former dedicated server? If you are ready to go straight to the goal the LAN-based backups, then a virtual machine for vRanger connection is perfectly adequate, as it does not move a lot of data (the ESX hosts carry the burden it). You can compare the costs and benefits, depending on the size of your environment is, and how long is your backup window. We have enough big clients who are perfectly happy with the LAN-based backups.
  I hope this helps...

• vFoglight alarm

  Hello community,

  I will have this message:

  1)

  Host	n/a	Instance	com Quest.NITRO:service = Data (CatalystDataService)
  Agent of	n/a	Origin (in good standing)	Data catalyst service throw data
  Type of agent	n/a	Default exploration	n/a

  Message and help

  Rule given to the catalyst Data Service pulled with undefined severity.

  Service impact level 0 Services

  There is no services affected by this alarm.

  2)

  Host	n/a	Instance	Server 64 bit Java hotspot VM (JAVA virtual machine)
  Agent of	n/a	Origin (in good standing)	Catalyst memory use checking
  Type of agent	n/a	Default exploration	n/a

  Message and help

  Rule Catalyst memory usage check shot with undefined severity.

  Service impact level 0 Services

  There is no services affected by this alarm

  What can I do to remidiate this?

  Thanks in advance,

  Guillermo. -.

  Check this KB solution support allows for the

  https://support.quest.com/SolutionDetail.aspx?ID=SOL85377&category=solutions&SKB=1&product=Foglight

  Solution SOL85377

  return

  Title

  "Catalyst Memory use Check" rule and rule "Data catalyst Data Service throw" constantly fire alarms not defined

  Description of the problem

  "Catalyst Memory use Check" rule and rule "Data catalyst Data Service throw" constantly fire alarms not defined

  Cause

  A possible cause is that the rules are against some left on objects of topology (expired) control and fire alarms.

  Resolution

  -FMS console with administrator account logon

  -Navigate to the dashboard "Script Editor".

  -Run the script below:

  TS = server.get ("TopologyService")
  num = 0;
  #! (CatalystServer) .jvm # .getTopologyObjects () .each)
  {vm-> ts.deleteObject (vm); num ++ ;}}
  #! CatalystDataService # .getTopologyObjects () .each)
  {vm-> ts.deleteObject (vm); num ++ ;}}

  return "$num" deleted

  ========================================================================

  To avoid undefined future alarms disable the condition not defined in the specific rule:

  -Come on in "Administration". Management rule.

  -Filter for the rule of the problem

  -Click on the name of the rule and select "View and edit" in the context menu

  -Now click on 'Rules editor' in the pop up window

  -Click the 'Conditions' tab and open "Undefined gravity".

  -Uncheck the enabled box and save it.

  A change request was opened to disable the undefined status by default. CR number is: FGL-13012

  For rules of JavaEE, CR number is: JEE-7529

  Quest default ID

  FGL-13012

  More information

  JEE-7529 fixed java basket 5.8.0

  Environment

  • Product:

  Foglight ~ 5.6.2
  vFoglight ~ 6.6

  Golan

• About this Mac window

  A week ago I updated my Mac Mini end of 2014 to Sierra and, among other drawbacks, I found that the "to comments of this Mac window" doesn´t show when it is called. In addition, the button of the substitution of Apple ban on which they consider unreliable applications (i. e.  those not manufactured by Apple or not using the iTunes channel) is now gone and I won't unintentionally control I have in my computer. In this case, this means that I can't update latest version of Penny Fletcher of his useful Multimarkdown application.

  You can adjust your settings to allow internet content to other websites by clicking on System Preferences > Security & Privacy > General and down, adjust the setting "allow applications downloaded on:

  To call ' about this Mac' Panel, press the black Apple > about this Mac

• I resized the Partition Mac to make more space for BootCamp and now Windows will not boot

  On a collague MacBook Air running 10.11.4, we used disk utility to reduce the Mac Partition so that we could then use a Windows tool to extend the BootCamp partition. However, upon restart, we got a BACK screen with the error that Windows cannot start because it cannot find the boot device.

  Help, please?

  This is not a mechanism supported by Apple to change the size of the Windows partition. Apple supports the remove/reinstall only.

  We try to remedy. Please after the release of the following OSX Terminal commands.

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  What is the model/year of the MBA? Please, do not post the serial number of your Mac. Orders 'sudo' will ask for your password.

• After recent, iPhone, 6, update, Windows, Explorer, does not work, see, iPhone

  I installed the latest update required for my iphone ios 6 a few days ago, and now when I try to download pictures from my iphone to my PC (via USB connection), the PC does not see the iphone.   iTunes sees it yet, but windows Explorer does not work.  It seems that some setting has been broken through the update of ios.  A way to solve this problem?

  Restart the computer and the iPhone. Unlock the iPhone before connecting it to the computer. Any change?

  TT2

• How to prevent the automatic launch at windows startup 10 itunes

  I have the latest version of Windows 10 and the latest version of iTunes on laptop Lenovo 2015 of 64-bit model.

  How can I prevent iTunes from launching at startup of the system?

  Try this...

  1. Right click on the taskbar.
  2. Select the Task Manager.
  3. Click the Startup tab.
  4. Click the iTunesHelper app.
  5. Click the button disable.
  6. Close the Task Manager.

• Bootcamp Windows - partition cannot be mounted

  Hey all,.

  I've been using Windows on my iMac (late 2012, Yosemite 10.10.5) without problem but today after I started MacOS Yosemite (to control simple file), cannot start again to return to Windows. Had no problem Bootcamp before... have not used to any advantage either 3rd disk utility. The only thing I have recently increased the Windows size 200 GB partition by decreasing the MacOS partition through disk utility (a month ago, no problem since then until today)

  1. Windows has disappeared from the startup disk

  

  2. disk utility shows disk0s4 gray and cannot be mounted. In addition, the correct partition size was 700 but here its listed as 500 GB GB (which was the old size before you increase it)

  

  3 when I try to restart with pressed ALT, Windows, but cannot restart, with a black screen showing "a disk error occurred.

  

  I'm not very familiar with techniques more. Only, I tried to install "Find" but cannot achieve anything with it.

  I tried your advice above and seems THAT NTFS is there...

  

  one last thing... when I try to check disk0s4, said "it should be repaired. When I hit repair; It says this:

  

  Need my Windows as soon as POSSIBLE, what more should I do?

  I don't have not upgraded to Sierra again. That I should? Or it will be even worse?

  I have tons of files on Windows that I need and unfortunately not supported for a while anywhere (sorry about that now).

  Help, please...

  stuff more to indicate...

  

  and I know if it's significant but cmd + s & ' fsck - fy "has not done anything other than check the Mac partition.

• 8gig of ram will be enough to use windows?

  I'm about to buy a macbook pro. This is the model of 512 gigabytes, 3.1 GHz, 8 GB ram. I want to only install windows to play spintires and that would be it. If I install windows and steam then spin tires it will the macbook running slower?

  rotating the tires to the requirements

  CPU:	2.5 GHz Dual Core

  RAM:

  4 GB

  If you install Windows using Boot Camp Windows wizard will use all your computer RAM, 8 GB, when you start in Windows. It's more than enough RAM for Windows and a spin the requirements that you have posted.

  If you boot into OS x, OSX will use all 8 GB of RAM.