8gig of ram will be enough to use windows?

Similar Questions

• Upgrading my ram will force me re - activate Windows 7

  I want to go to 8gigs of ram to 16gigs. Installation of the upgrade will force me re - activate Win7 64?

  No it won't. But you need to test the new memory once you install to be sure, that there is no issue.

  Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if your one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  J W Stuart: http://www.pagestart.com

• The upgrade of RAM will improve the speed side Windows and Mac?

  I use VMware fusion for music production and this program requires plenty of work. I have a MacBook Pro 4 GB of ram and when I turn on VMware it goes to 2 GB of ram in Mac and 2 GB ram under windows. My Mac's speed is normal when VMware fusion is off but when I turn on my Mac is very slow. The upgrade of ram will improve the speed on mac and also windows (windows is also very slow)

  BTW, my English is not very good

  Well, take a peek in the Windows Task Manager to see how much memory is required/used. If an operating system requires more memory available, it will start to swap out the disk, which will introduce a huge performance impact. If the answer to your question is probably yes.

  André

  PS: After adding memory to the host, you must also change the client memory for the virtual machine.

• OfficeJet 6500 will not display ink using Windows 7 levels.

  I have a HP Officejet 6500, model E709n wireless. My OS is Windows 7 Home Premium Service Pack 1.  I downloaded and installed the drivers and software.  It will scan and print, but responses to double click on the scan and fax buttons is very slow.  It will not show ink levels.  I get a message that the computer cannot communicate with the printer.  The error message also tells me to check that the printer is on and the usb cable is connected.  Since they are obviously related, there is another problem.

  When I connected the printer to a computer running Windows XP Professional, everything works fine.

  Does anyone have a solution?

  Hey Bob,

  I suggest the doctor printing & scanning HP to see if it is able to solve your problem running. If should be able to recongize any wiring or driver error and solve them for you. If it does not solve the problem, post back with new details and will continue from there.

  Thank you!

  Sean

• will not download Itunes using Windows 10

  whenever I try to download and install iTunes, I get a message saying thanks for the installation but it never downloads or installs iTunes. I had problems with iTunes, then I uninstalled later I went to apple.com and I can't for the life of me to download or install iTunes.

  Check and sure for a complete uninstall of itunes from your pc. ThenTry download itunes, if the same problem recurs, try after some time.

• Can I use Windows 7 even if it has not been activated?

  Can I use Windows 7 even if I had not enabled it

  You will be able to use Windows 7 for 30 days during its grace period, but you must activate it after 30 days of use all of its features and functionality.

• Satellite L655 - 14 d - lots of RAM will be used

  Hi all what he

  I have a Satellite L655 - 14 d with 3 GB of RAM and 1 GB of dedicated video RAM problem in front, it's RAM exhausted even when the computer is left idle without any programs running in the back ground is about 65-70% of the total RAM is it normal to be like this? Help, please

  concerning
  jkjoms

  Hi jkjoms,

  It depends on your installed software stuff and the operating system

  If you use Windows 7 with a lot of software installed, they always start in the background, is it possible that over 50% of the RAM will be used.
  So it's hard to say if it of normal or not without knowing what stuff is installed, but in general this behavior is the only associated software and has nothing to do with the material.

  By the way: If you don't need some applications at startup, go to msconfig (start > run > msconfig) and disable all programs that you don't need.

• My CST Studio 32-bit software will be able to use the 8 GB of RAM?

  I have 64 bit windows os and my CST Studio software is 32-bit.

  My s/w will be able to use 8 GB of RAM

  Original title: useage 64bits

  If she needs as much RAM, it will be able to use it.

  The question about the system RAM and 64-bit OS is the ability of the operating system to use more

  only 4 GB of RAM. A 64 bit OS has no direct impact on software use RAM.

  ,

• RAM will improve the marketing of the Adobe Creative Cloud Apps?

  Hello

  The title is pretty self-explanatory. I was wondering if it will help more RAM. I have 4 GB of ram currently installed in my iMac, and I wonder if the upgrade of RAM will help products Adobe launch faster because they are so slow to start. Office 2016 is too slow to start.

  Thank you!

  4 GB of RAM is quite minimal quantity to use OS X on. In general, more RAM will not help open ACCESS is the first, but if you close the application and then restart it, Yes, additional RAM will help, especially if you to 'virtual memory' (where the HD is used as virtual memory). However, more RAM should be more comfortable for OS X, which (in turn can perhaps) will help VAC throw faster. If you buy more RAM make sure you buy OWC or Crucial, as they are known to be compatible with Macs.

• The upgrade of 8gig, 16gig RAM, the disadvantages?

  Hello people,

  I think to add an another 8gig to my initial 8gig of ram, I want to make sure if everything is normal for my motherboard. I have aooreciate your answers.

  Thank you

  Product name: HP Pavilion dv7 Notebook PC

  Yes, your model is one of those who will have 16 gigs.

  DV7-6c95dx

  The problem is now memory is the kind of a high price. Here are the 16 gig kit you need:

  http://www.crucial.com/USA/en/memory/ct2k8g3s160bm

  When I did my upgrade to 16 concerts a year ago, it was a little more than half that cost.

• Installing more ram will make my computer Windows XP go faster?

  original title: windows xp
  Good so I have a few things.

  1. I have a dell Dimension 3000 that hang out around 256 mb of ram and a 70-80 GB hard drive, I use it only for a camera of security around the House, but now the computer is so slow, that I want to upgrade.

  2. I would like to ask a few more ram in it, at least 2 GB, will make that it go faster?

  3. I also might want to replace the hard drive, it makes not go faster, and I have to reinstall the OS?

  4 will be one of this affect my security camera because the dimension has these ports inside the motherboard that allows to add stuff to it and I plug this card of mother of security camera and my friend helped me to implement, he moved so that he can not help me more. I was wondering, if replaceing the drive and ram will make my pc faster and still be able to use my camera to safety without any reinstallation

  Thank you!

  Tech Specs: http://support.dell.com/support/edocs/systems/dim3000/en/sm/specs.htm#wp1075776
  Documentation: http://support.dell.com/support/edocs/systems/dim3000/

  Note: Some of these old dell computers have only a drive Bay and the data cable is short and has only one connector for the hard drive. If this is the case and you plan to go XP disk a larger and faster hard you will need a USB external drive to store the backup Image file. Pull the old drive, use the emergency recovery CD to restore the new disk.

  Also based on time, this model has been sold by Dell, the chances are very high that the biggest hard drive you can install is a disk of 120 GB PATA/IDE BIOS will not support 48-bit LBA (disks more 1237 GB in size).

  Disc replacement for example: http://www.newegg.com/Product/Product.aspx?Item=N82E16822136457&cm_re=IDE_drives-_-22-136-457-_-Product

  How to move from Windows XP to a new and bigger - hard drive Using EASEUS Todo Backup
  http://www.PAGESTART.com/winxpnlhdtodo04051101.html

  Additional memory - use the Crucial utility "system scan": http://www.crucial.com/

  In short the additional memory (1 GB) and a pilot of faster (7200 RPM) will improve performance a bit. But this is an older system, so don't expect miricals.

  J W Stuart: http://www.pagestart.com

• Upgrade from 2 GB to 4 GB Ram will change IP address

  Hello, if I upgrade my ram from 2 GB to 4 GB will all my software work properly or I have to buy new software because I am using all of the authentic software & can not buy software again. Will also be my IP address remains the same or changes with Ram... Thank you

  upgrading your ram will not change one thing other that the amount of RAM your machine shows... However if your opperating system is a 32-bit system anything more than 2 GB will not make a difference if this post can help solve your problem, please click the mark as answer check on this page THANKS AND GOOD LUCK

• done using Windows Anytime Upgrade upgrade home premium to professional RAM limits increased?

  I currently have windows edition Home premium with 16 GB of RAM. My question is if I use Windows Anytime Upgrade home premium upgrade to professional that will allow me to increase up to 32 GB of RAM, or I have to buy a version of professional disc?

  I currently have windows edition Home premium with 16 GB of RAM. My question is if I use Windows Anytime Upgrade home premium upgrade to professional that will allow me to increase up to 32 GB of RAM, or I have to buy a version of professional disc?

  Yes, it will be, Windows 7 Professional 64-bit supports up to 192 GB of RAM. If the upgrade to Windows 7 Professional will unlock this limit through the Express upgrade.

• I have a retail version of Windows 7 (home premium). I buy a new motherboard, processor and RAM. Will be my install of Windows 7 function properly?

  As mentioned, I have a full commercial copy of Windows 7 Home Premium and I'm on the point to replace my motherboard, processor and RAM.  Windows 7 will work properly?  If this is not the case, what should I do to make this happen?  Thank you!

  Hello

  With a license for the retail of Windows 7, you can change any material you want.

  You will probably have to reinstall windows 7 as the 'old' motherboard drivers will be always installed on this drive hard (if you use the same drive where Windows 7 is already installed), so that he will probably not start correctly.

  You can even move a license to retail to another computer if that never fails

  The rule is: a license for a single installation.

  Here's how to do a clean install of Windows 7.

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And change a large part of the material probably will ask you to activate again.

  "How to activate Windows 7 by phone '

  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

  9. If the automated Service is unsuccessful

  (A) if the automatic activation service informs you that she has failed and cannot help with activation, then STAY ON THE LINE and your call will be transferred to an operator of activation which will help you to activate your copy of Windows 7. If you get suspended under all pending, then phone back, but this time DO NOT respond when the ansafone asks what service you need (twice). This puts in the queue to speak to an engine and does not appear to expire so fast. The operator will give you a confirmation ID number if they accept that your copy of Windows 7 is legitimate.
  NOTE: The operator just explain your situation and what you did to require activation. (EX: hardware upgrade, installed Windows 7 on a new computer after uninstalling it from the old one, etc...)

  See you soon.

• How much faster 16 GB 1600 RAM will be more 8 GB 1333?

  I get just in the business of video editing, and I'm still finding my bearings. I just built a computer for use with the first, but I think to upgrade the ram have little more. Currently, I have 8 GB 1333 (4x2Go), and I see this first uses almost all of it. That grows in my video, im worried my ram will become more of a bottleneck. Is it wise for me to update my 16 GB 1600 ram (it should cost me about $125)? im just tired of playing with hardware components at the moment, but if he's going to provide a performance histaria gain I'll do. It's my building right now:

  Core i5 2500

  simple 2 TB drive (please don't kill me, I know im supposed to do an entire raid configuration, I don't have the time to do, ive got a huge delay to come and I don't know the first thing about raid, he prolly do after that)

  Gigabyte gtx 470 overclocked Edition

  OCZ ModXStream Pro 600W

  I will do the entire raid thing at some point (hopefully soon), claim that I have a decent Setup on this front.

  I usually change the raws 1080 p 30 / 60 fps, btw.

  What do you think?

  Your i5 2500 is probably an important bottleneck and very probably more than the 8 GB of RAM.

  Upgraded to an i7 2600 k will give you twice the effective cores (adds hyperthreading "nuclei") for the treatment and accelerate many aspects of CS5 or CS5.5 (assuming that you have one or the other).

  From 8 GB of RAM, 16 GB of RAM might help a little, probably for the most part with coating once a project is completed. This is useful, but I suspect that you are suffering with a normal use of 1080 p on the timeline and timeline with your current configuration.

  You can use the Task Manager to see where your bottlenecks are; If the CPU usage history shows that you use 95 + % of your 4 hearts for those times where you feel it lacks performance, CPU power is probably your most important bottleneck.

  About your big date limit, you can buy additional disks and simply share the load (i.e. projects, cache of media and media cache db on the files on another, scratching still one) for the performance immediately; then, once you have completed your project, you can configure the new drives in RAID 0 and have first rebuild the cache and scratch your files to the new RAID 0 array.

  Jim