vFoglight 6.7 and monitoring of operating system

Similar Questions

• How to: format and reinstall the operating system

  Original title: is there a virus that downloads all the images that appear on windows xp family within 24 hours, I have acquired 17 000 images and used to my PC I want to enter windows in any mode

  I can't navigate what whether in safe mode with or without networking. How to flatten the system, which dates back to the original state that I'm not bothered about registering files images etc want just my PC to work

  Hi wendyspeariett,

  1. you receive an error message when you start in safe mode or normal mode?

  2. did you of recent changes on the computer?

  If you have access to the internet in safe mode with network, then you will need to scan the computer to remove all infections from the computer and check if that helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx 

  You can also use Microsoft Security databases to scan your computer

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

  If you want to format new Windows XP installation, you can move forward.

  A new installation is to remove all data from your hard drive repartition and reformat the hard drive and reinstall the operating system and programs empty (clean) hard disk.

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307

  How to partition and format a drive hard using the Windows XP Setup program

  http://support.Microsoft.com/kb/313348

• Want to download 10 W but not able to do that, during installation, a problem arises and the previous operating system is restored.

  My laptop is preinstalled with Windows 7 Home Basic.  At the free launch Windows 10 I downloaded the same and after 2 months, the hard drive crashed.  The repair shop trying to fix formatting, but could not revive.  This is why I bought a new hard drive and repair charge shot Windows 7 Ultimate edition.

  Now, I want to download 10 W but not able to do that, during installation, a problem arises and the previous operating system has been restored.  When I posted the question about how to solve this problem, I was told to try the download by way of USB/ISO file.

  Now my question is that

  one) can I reload Windows 7 Home basic as I have the product key?

  (b) I can then download Windows 10 according to the normal procedure?

  I'm not tech savvy, afraid to download files in USB and then load into the laptop, so this question.

  Concerning

  S Subramanian

  Original title: Windows 7 Home basic

  You can directly download Windows 10. Windows 7 complete edition currently installed is not genuine.

  When you upgraded from a previous version of Windows, what happened is that (your PC) hardware will get a digital right, a unique signature of the computer which is stored on the Microsoft Activation servers. The real Windows 7 or Windows 8 license you were using previously will be exchanged with a key to the diagnosis.

  Whenever you need to reinstall Windows 10 on this machine, go just to reinstall Windows 10. It automatically reactivates.

  Therefore, there is no need to know or get a product key, if you must reinstall Windows 10, you can use your Windows 7 or Windows 8 product key or use the reset function in Windows 10.

  Step 1: How to download official Windows 10 ISO files

  Step 2: how: perform a clean installation of Windows 10

• Can I have Windows 7 Professional and Windows 10 operating systems on the same lap top

  Can I have Windows 7 Professional and Windows 10 operating systems on the same lap top

  Yes, you can, but not with the free upgrade, you will need to purchase a full license for Windows 10 to do this.

  Step 1: purchase a license:

  Buy Windows 10 family/professional edition

  Step 2: Download Windows 10 and create a bootable copy

  How to download official Windows 10 ISO files

  Step 3: Create the partition then install dual-boot configuration:

  How to: install a Setup to dual-boot with Windows 10 and earlier versions of Windows

• This disc contains a "UDF" file system and requires an operating system that supports the ISO-13346 "UDF" file system specification.

  I've seen other posts on this topic. Nothing seems to work, so I thought I would explain my situation.

  The machine is new. Win7 64 bit company. The problem I see is that I try to load some versions of Visual Studio on the new machine. However, none of the discs auto-run using my local internal DVD drive. They all have a Readme file with the message "this disc contains a"UDF"file system and requires an operating system that supports the ISO-13346"UDF"file system specification."

  I know that the discs are good, I used the on my old machine, and I can always use them on other machines I tested.

  The real kicker here is that I can plug an external USB DVD drive... and then the local drive starts to read the installation discs! It's like making this action allows something else in the machine.

  Also, I even restarted the machine mode of diagnosis (without external DVD drive attached)... and restart, the drive would read the installation discs. BUT when I do a full stop and then turn on the machine upward, the local drive gives me the same readme file. Again, it is as if something gets activated, and then reset to a complete stop.

  I am at a loss of what to check then. Real head-scratcher, because I know the drive works and the machine can recognize the drive and even read installation discs.

  I do not have the applications installed on the machine of DVD burning, so I don't think there is a conflict.

  Any suggestions are welcome.

  Thanks in advance!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums so the problems occurring on Windows 7 Enterprise.

  Forum TechNet Windows 7

  Hope this information helps.

• install windows 7 from download - this disc contains a "UDF" file system and requires an operating system

  I downloaded Windows 7 from MS with a liscence on a computer running Windows 8. I wrote the ISO on a DVD but when I try to read every DVD I see is a readme file that contains the text "this disc contains a"UDF"file system and requires an operating system
  that supports the ISO-13346 "UDF" file system specification. "

  Former title: installation of windows 7 download

  Use the following to burn the. ISO to a blank DVD file:

  After graduating the .iso file, you use the Microsoft .iso to USB/DVD tool to create a bootable DVD or USB (requires a blank DVD or USB flash to at least 4 GB key).

  

  You can also burn the. ISO natively in Windows 8 file:

  Burn a CD or DVD from an ISO file

• BlackBerry smartphones, I can't enter Thai language. How can I upgrade and choose the operating system for my BB9900?

  How can I upgrade and choose the operating system for my BB9900? I need thai input but on the site of H3G Italy software download is not all the language version. I don't know from which site to download.

  Hi niranaja

  If your device is running always on OS 7.0 then try 7.1 any Pack OS carrier that also supports Languages.But of Southeast Asia before opening your computer and uninstall any previous packs if installed OS on it. After that, try this:

  1. download and install on your PC a pack OS with any language by carriers

  • (Make sure you download for the same phone model)

  2. download and install the latest version of BlackBerry desktop from here BlackBerry desktop software software

  Then using software office perform your full backup of your device.

  3. search your drive C: Vendor.xml and delete them, there may be one or two vendor.xml (on changing your Pc folders option to show the hidden files/folders ):

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\Windows UserName\AppData\Roaming\Research in Motion\BlackBerry\Loader XML

  4. go into C:\Program Files Research In Motion\AppLoader. (For Vista or Windows 7 64-bit, the path will be C: > Program Files x 86 > common files > Research In Motion > AppLoader) double-click on Loader.exe.

  Upgrade will continue then after Installation of the new OS restore your BlackBerry Desktop backup

  Software.

  Once done open BlackBerry Desktop Software (7.1) > select Applications. > in the section of language and support for entry , select the language to be added to the BlackBerry smartphone (a + will appear next to the language to install) > click apply.

  KB13067 : How to get smart BlackBerry phone language packs.

  So please try it and let us know.

  Prince

  _____________________________________________________________________________

  Click 'Like' If you want to thank someone.

  If problem resolves mark message (s) as a 'Solution', so that others can use.

• I just had to wipe everything on my mac and reinstall the operating system.  How can I get my products Adobe Creative Suite back on my computer?

  I just had to wipe everything on my mac and reinstall the operating system.  How can I get my products Adobe Creative Suite back on my computer?  I do not have a disk.  I think I bought the package online.  I don't see anywhere to re - download.  The purchase was made in 2011.

  Any help?

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7
  • Lightroom: 5.7.1. 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Download and installation to Prodesigntools help links are located on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions". window using the Lightroom 3 link to see these "important Instructions".

• VMPlayer newbie - switch back and forth between the host and the guest operating system

  I am newbie to VMPlayer. I just installed VMPlayer 3.0.0 build-203739 on Red Hat Linux 5 (host). Then I created a VM comments Kubuntu (8.10). So far so good. In the VMPlayer window, I selected 'play Virtual Machine '. After this, the host operating system controls disappeared and I could see a taskbar on the top of my screen and I could also see Kubuntu startup (in an area of the small window in the center of the screen). The problem I'm running is that I'm not able to navigate outside of this area of the small window. I'm not even able to click/Select the taskbar of VMPlayer top of the screen. The mouse movement is limited to the area of the small window. How to and fro my host and the guest operating system? Is there a key combination? I finally had to stop my VM guest to return to the control of my host system. I guess it's a problem quite newbie that I am running. Any help would be greatly appreciated.

  Hello, welcome to the forum

  Host Windows to switch between comments and the OS (when you are in the guest operating system), you must use ctrl + alt.

  According to this link , it's the same thing in Linux host too.

  >Default VMware Player uses key combination Ctrl + Alt to jump out of the guest. Then CTRLAltdel is accessible via theAltInsert command. If you find this annoying, you can change the jump shortcut to CtrlAltshift by adding the following lines to your ~/.vmware/preferences:

  > pref.hotkey.shift = "true".

  > pref.hotkey.control = "true".

  > pref.hotkey.alt = "true".

  After your installation OS in the virtual machine, install "VMware Tools" on it so you will get better performance and some improvements (like moving your mouse out of guest to your host operating system operating system and Vice Versa, or be able to copy beyond host/guest, better resolution on reviews and...)

  I hope it helps a bit.

  -= If you have found this note/response useful, please consider awarding points to 'Correct' or 'useful ' = -.

  -= If there is a mistake in my notes, please correct me! =-

  -= Thank you =-

• Client Oracle for Oracle database 10g and Windows 2003 operating system...

  Hi all
  I need an Oracle Client for Oracle database 10g and Windows 2003 operating system.
  I searched www.oracle.com it there as much of products so basically that I got confused.
  Could you guide me please?

  Hello

  Here is the link: download (Oracle Database 10g Release 2 (10.2.0.1.0) customer - 10201_client_win32.zip (475,090,051 bytes) (cksum - 946434250)).

  Oracle Database 10g Release 2 (10.2.0.1.0)
  http://www.Oracle.com/technology/software/products/database/Oracle10g/htdocs/10201winsoft.html

  Kind regards
  Hussein

• Firefox will replace wndows, etc, etc.? And the real operating system?

  I keep seeing Firefox OS for desktop of android and so forth, as well. Will it be a real operating system that could replace the windows and so on of the OS. I want to be clear with this problem.

  Hi Briguy, no bones of firefox will not be a replacement for the Office of the operating systems like windows at the moment. However, since it is open source, people are free to hack on it and try to get firefox os running for all kinds of platforms - there are projects he works for devices like the pi raspberry for example: https://wiki.mozilla.org/Fxos_on_RaspberryPi

• lost all my favorites when I had to erase my mac and reinstall the operating system.

  I had to erase my mac and get back to a previous operating system. I was with Time Machine to back up my computer, so I thought that he would return to the top of my bookmarks Firefox so file. I reinstalled Firefox, but I can't find the file anywhere. I checked in this location/Library/Application Support / Mozilla

  I have a sync also account, but can't find my recovery key and I no longer have access to which it has been synchronized to the other computer.

  Any ideas on how I can get my favorites back?

  Thanks for your help, but I could solve my problem. I restored my computer using Time Machine and my favorites are back. I could not find the file on my hard drive for time Machine because he was in a hidden folder.

• Impossible to download and reinstall the operating system after erasing HD

  Yesterday morning, my iMac won't start.  It was fine the night before.

  The progress bar reaches about two thirds to three quarters of the way to the end when the bar of progress disappears and I find myself with a gray screen. It does this by starting too.

  I followed the advice of Linc Davis at https://discussions.apple.com/message/21333265 (hash) 21333265 (Note - I can't find the symbol of hash on my keyboard key so if you if know where he is, please replace by in the link - oh (hash) and tell me where it's too please ;-)).

  I started the Revovery volume (now here actually).  Run Disk Utility/First aid finds no problem with MacIntosh HD (my boot drive). I can't find how to repair permissions.  The option no longer seems to be there. Reset NVRAM has nothing else that makes the iMac wonder my preferred language.

  I used download and reinstall OS option.  The first time I tried to re-download El Capitan, it took 15 minutes and 45 minutes to install.  Installation failed leaving me to the grey screen again.  I think that the Setup program itself was trying to restart the iMac when he got stuck in the same place I'm stuck.  I left it there for about six hours before I tried to restart manually.

  Tried to download the operating system again. This time, it was after using the recovery volume, select MacIntosh HD, by using erasing, then the option reinstall in THE.

  I did two times now.  The first time I tried 'Erase and re - install' the download bar has got to a point about a third of the way across, and then he stopped. Time of download bar gradually got more and more long, up to what I canceled it (when the display estimated download time is six and a half).  The internet connection was problematic, or the Mac had stopped download (similar to the earier progress bar).  The second attempt to delete and download, the download bar has not yet started to progress.

  My HARD drive has several volumes.

  1. The most important. My MacIntosh HD with OS 10.11.4 - El Capitan.
  2. The second, MacIntosh HD 2, is about 50 GB, a Mavericks installed on it.
  3. The third is 10.11.4 recovery volume.
  4. The fourth is another volume of recovery for the Mavericks.
  5. There is another called eDrive bulkhead.

  Apart from MacIntosh HD, with none of these volumes I problems in starting up (with the possible exception of the Mavericks resumed, that I have not tried to access all since the update to El Capitan).

  I used first aid utility disk several times, and no problems have been reported. I used the version of El Capitan permanently.

  I can't understand why, after erasing the MacIntosh HD to do it again, I can't get the iMac to download the MacOS and reinstall.

  A couple of clues-

  • After his clear utility drive always reports what is MacIntosh HD. (When I restart, the dialog "Select Start Drive" only shows the volume of the Mavericks and eDrive)
  • Disk utility also shows "Apple Disk Image/OS X Base System."  OF THE said that it is ejection. But this button does not work.  I suspect it's what might stop download me the installer and start again.

  I used e-drive to check the iMac and, in particular, the drive HARD; even performed a surface scan.  No problems have been reported.

  Your 2007 iMac is too old to download OS X, you need to install OS X since the recovery partition directly. If this does not work then Yes, something is wrong with your HD run Apple Hardware Test Mode Extended 2 - 3 times back to back, if errors appear which confirms what I said. You will need the original DVD that came with the computer in order to run it.

• Can I get an installation Win XP Pro Update CD includes SP3? The one I have now is pre - SP2 and reinstalling the operating system takes 4-EVER!

  My existing Windows XP Pro installation CD is almost a decade, and it precedes SP2. It's a nightmare, whenever I have to reinstall the operating system as ut takes a day or two to download Microsoft updates. Is it possible to replace my installation CD with a newer version, including a number of post-SP3 updates and SP3?

  You do this using a technique called "slipstreaming".  You start with a genuine XP installation CD and add in the necessary service packs and updates.

  If your CD-ROM is sp1 or 1A, you can just slipstream sp3.  If you have XP 'or' (pre - sp1), it is more complicated.

  There are many websites that explain how to do this.  Google for "slipstream sp3 of xp" or something similar.

  This site claims to have a script that will create a slipstreamed XP sp3 and all post-sp3 CD critical updates (description wrongly "sp2").  I the have not used and do not have any information on how easy it is or if she actually does what it says.

  See also http://social.technet.microsoft.com/Forums/en-US/itproxpsp/thread/eff07503-cf09-4ada-b327-410d341450b9/

• my laptop starts up then the screen goes black and says no operating system found

  My child put their hands on my laptop now it starts and then it says no operating system found, or there is another sign that comes up it says

  Security Accounts Manager intiliaztionfailed because of the following error: the handle is invalid. Error status: 0xc0000008 please click ok to shut down this system and reeboot in safe mode / check the log of the events for more information

  the laptop say no operating system found is when I put the xp disk in I thought the disc would have fixed it... .as now you will probably laugh like its obveous I nothing about computers of any help would be much appreciated because it wasn't a cheap laptop and I need to keep the best care that are out of my reach of girls, but he himself is a task... Thanks in advanve david

  Please see: "operating system not found" or "Missing operating system" error message when you start your Windows XP-based computer