VFoglight construction services 6

Similar Questions

• Data of the monitoring report: FSMService

  Hi all
  I have successfully build different services with the host group. I can see the details of the Service with the content engine virtual and everything seems fine. But when I now try to run a report using the monitoring: FSMService as a context parameter, for example the Module VMware Virtual Machines configuration report, I have all shown data if I use one of my construction services.
  If I use the build already in virtualization Service, it shows me all the VMS, but my goal was to report according to the accumulation of services with the Service constructor. Could this be something tha service accumulate shows machines (host)?
  Help, please.
  Kind regards
  hEINER
  SystemInfo: vFogLight 6.5 on Windows Server 2008 R2 64 bit

  Hello hEINER,.
  My suggestion would be to open a support case to diagnose the issue further.
  Concerning

• Foglight v6 - FaultException: impossible to extract the data of inventory of the collector

  After having modernized our virtual center to V4, the foglight fails to report all the details and only has the following alert:
  "FaultException: impossible to extract the data of inventory of the collector: the parameter name cannot be null or an empty string."
  ' Parameter name: key to make sure the collection agent service is running.
  If anyone else has had this problem and how to solve?
  Thank you
  Karim

  Hi Joviyach,
  I logged a call with Vizioncore and the resolution is as follows:
  the problem you have is related to a VMware problem experienced during the upgrade to vSphere 4.0 as detailed in: kb.vmware.com/.../search.do
  Bascially, you must run a SQL command of your Virtual Center via MS SQL Management Studio that will identify one or more VMs who have a missing entry in the VPX_VIRTUAL_SCSICONTROLLER table. Once this information is determined that you would follow the steps 2 to 6 of the reolution... basically remove these virtual machines of the inventory and adding them back.
  When these steps are complete, you will re-start the vFoglight Collector of Vmware and Vmware vFoglight connector services.

• VirtualCenter agent

  Hello
  I installed Vfoglight 6 on my virtual Center (Vsphere 4).
  Installation and configuration went well but I can't retrieve all of the information of the virtual infrastructure that the agent does not seem to work.
  I got the following error in the foglight web console:
  VirtualCenter Agent::CommunicationException: Impossible to extract the data from the collector collector settings: the communication, System.ServiceModel... Channels.ServiceChannel, cannot be used for communication because it is in a Faulted state. Make sure that the collector agent operating system service.
  Service are out of the race running and properly configured agent identification information.

  Any idea?

  Thanks for help

  Take a look at the vFoglight server and check if the collector vFoglight & vFoglight connector services are running.
  Then check the collector & connector that opens a session or is found by default in the following location:
  32-bit operating system: program Files\vizioncore\vfoglight\vmware agent\ * .log
  64-bit operating system: Program Files (x 86) \vizioncore\vfoglight\vmware agent\ * .log
  -Larry

• need for a starting point

  Hello

  I'm new to blackberry z10 webworks.  I try to follow the procedure on the section of the web-based training, but she cannot cross, collapsed to the emulator to ripple. My chrome didn't let drag me the file inside, I have to use default google store chrome ripple,

  now the build service cannot be started.

  can someone give the updated guidelines on how to operate the webworks?

  Thank you.

  These are the instructions for setting up of ripple: https://developer.blackberry.com/html5/documentation/getting_started_with_ripple_1866966_11.html#bpa...

  In this page, it also specifies how to activate ripple (how to start construction services)

  Once you have downloaded the tools: https://developer.blackberry.com/html5/download/)

  Start building your first application: https://developer.blackberry.com/html5/documentation/creating_hello_world.html

  Our github page has many examples of code for you to experiment as well: https://github.com/blackberry/BB10-WebWorks-Samples

• Authentication customized using the Web Service construction

  Our requirement is that we want to create an application that uses the web service for authentication. How is it possible. A how to do this will help.
  We create a Web Service with an applicationLogin method that takes the user name and password input and returns true or false. I want to use this web service to authenticate the application connection.

  Hello

  Ok.
  Can you check Home > Application Builder > application 100 > shared components > authentication schemes > change the authentication scheme
  in the select field Invalid Page Session list
  what page 2.
  Check this page 101 a: APP_USER filled when you browse it.

  It seems that you have created a reference to Web Service manually by copy - paste SOAP envelope?
  And region of SOAP response with field response Collection store
  When you create a Web service reference with the location of the WSDL document, you are not asked for the name of the collection.
  Only when you create processes on submit type Web service on page 101, there is an option to use the collection or the item.

  And if you manually create the Web service, it seems that you cannot choose between the collection and the element, you should use the collection that you specified during the creation of reference.

  Anyway, you can use the collection to this approach to page dummy connection since: APP_USER is populated by anyone on page 101.

  I updated most of the page and creates a Web service reference manually the SOAP envelope (from the same Web service)
  and put the second region with the result. Collection is specified in a Web service reference.

  I hope that will solve your problem.

  Kind regards
  Oleg

• "Service location" uses data from my data plan when it is on?

  My iPhone 5 is my first smart phone.  Unlike most people, I rarely use it as a laptop.  I just use it as a phone.

  I'm confused about what "data" are and when I use 'data' of my package of data and when I'm not.  "Location services use data.

  my plan when I activated?  Or can I leave the location services on all the time without emptying my small data assignment?

  Thank you

  No, location-based services do not use data simply by being on. They will use more autonomy . An app of navigation such as the construction of maps use data because the application downloads maps on the fly.

  You can check what the things are using data by going to settings > cell and drag down. You will see a list of applications that can use data and a switch. In small print under the name of the application is the amount of data that the application operates since the last time you reset the stats. You can reset the data all the way down the screen on your billing date if you want to get an idea of what is using your data. Activate the switches or disable depending on whether you want to allow a particular application access to cell data.

• How contact/email customer service of Toshiba UK?

  I have a letter from questions about the quality of construction A100-147 I want to send Toshiba UK Services customer, I searched all through this Web site and even had to register with it (good work I actually own an another Toshiba, otherwise I wouldve never been able to put a post here).
  anyone can direct me to it, that all get is this forum it seems.

  Or please provide me with the email address.

  Thank you
  Shippouk

  [Edited by: admin]

  Hey shippouk

  I checked the links suggested above and it works fine.
  Generally if you have problems with your laptop the competent first point of contact is an ASP in your country.

  Also, visit this link:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/contact_toshiba.jsp?service=EU

• Need a plan of construction or images of Satellite Pro 6100 for BT / WLAN position

  Hello

  I need a 6100 construction plan or some pictures of the location of the device Bluetooth and WLAN.
  This parts are modifiable or not?
  Because I have bad RTC 6100 with WLAN and Bluetooth and another who works without this two devices so I want to build this parts in the workbook, but I don't know where they are or if it is possible to do.

  Thank you

  Here is the plan for the two, BT and Wireless Lan for the Toshiba 6100
  http://Weller.WS/Toshiba/antenna.html

  The BT card slot is accessible from the bottom of the laptop. (just a screw to lose)... you will see the pink BT antenna wire there, too.

  Internal MiniPCI wifi requires that you remove the keyboard first (two screws covered by plastic on the top of the F1... F12 keys) then open a plastic cover that hides the Mini-PCI card (the location is where would be the "F6" key). It requires a force to remove this plastic cover ;)

  Concerning

  chain

  P.S. All additional cards (BT and WiFi) are sensitive parts of static electricity. If you plan to trade on your own, take the necessary precautions. If you are not familiar with this, please consult your nearest Toshiba service.

• Experience with the service coverage in Bulgaria

  Hello

  I am one of the sysadmins of a large international company, which has offices in Sofia. Bulgaria.
  I would like to share my experience with the Toshiba products and service coverage in Bulgaria.

  Months ago, we bought an external USB hard drive - STORE. E PARTNER 2.5 500 GB USB 3.0 P/N PA427E-1HE0. After you have deployed the HARD drive, I noticed that the computer constantly loses / restores the connection to the external drive.

  As I have suggested that the cable is not inserted properly, I just pulled the cable to the USB connector to check that it fits fully into the socket. To my surprise the just USB connector broke and fell inside the HARD drive chassis. In my opinion, this is a factory default, a badly welded connector.

  We talked to the service allowed in Bulgaria: STEMO and they sent the disc with a protocol that it is a physical damage that violates the terms of warranty service.
  I can't imagine a way to prove in this case that we have not jumped on this HARD drive and that's the way it came from the box... We went to buy Hitachi after this case, and I can say that we had not a single complaint of users or technical staff.

  I would like to say that it was really a bad surprise for me that a multinational company could offer this customer service the poor in Bulgaria, especially given a STEMO dealer who are so famous here for their complete lack of quality of service and poor standards.

  This will avoid for sure choose me no matter what other Toshiba products in the future.
  Thank you.

  Sorry to hear about this. It is very unfortunate to have such an experience with the authorized service provider but I n t think that such a negative experience such influence negative on you.
  One issue doesn't mean Toshiba products are bad.

  You know very well that Toshiba is one of the largest companies for HER and material production in general. A few production errors can happen to anyone.

  Problem is that many people don t care much material and very often some hardware components can be damaged very easily. Can you imagine how much money Toshiba or any other hardware manufacturer will fix these issues where everybody says it's lack of production?

  On a path, I can understand you, but otherwise I can understand Toshiba to be skeptical about these mechanical defects. You as an expert in computer SCIENCE know these issues. Can you imagine how you will react when you give your new notebook your co-worker and a few weeks later it brings you with broken keyboard? I don t think you will accept his argument on construction of bad keyboard.

  You know that's not easy to discuss these issues.
  In any case, thank you for your ad. This forum is the right place where people can exchange experiences and opinions.

  Good luck

• Construction plan necessary to change HDD on Satellite 1110

  Hello friends.
  I have a problem with the change of the HARD drive on my laptop.

  Give me a plan of construction of the work?

  Thank you and forgive me my English :-)

  Homer J.

  Hello

  I don t think you will find plans to build for this laptop.
  Service manuals are not public documents and only authorized service provider has access to these documents.
  But wait to my knowledge that the cover of the HARD drive location is placed at the bottom of the unit.

  All simply remove the HARD drive cover and you should see the HARD drive.

• In construction to be shipped the time

  Can then someone tell me what is on average the time of under construction to the navigation? I received the email "under construction" Wednesday afternoon but have yet to hear anything else. I just hope someone has an idea that they could share.

  Time to call Motorola Customer Service and ask them to check the order number on the top of page 1 of your email in order to Motorola.

• Deploy the web service on ARM processor

  Is it possible to deploy a web service on an ARM processor with LabVIEW ARM module?  If this is not the case, a web server for an ARM processor has been done in before LabVIEW?  Is there an example of code out there?  Thank you.

  skryger,

  From LabVIEW for ARM 2009, there is no way pre-constructed to deploy a web service on an ARM processor.  (The only options in accordance with the specifications of construction are Application, Source Distribution and the Zip file.)  Of course, who does not eliminate the possibility of building one yourself.  Maybe someone from the community can develop more if this was done.

  Kevin S.

  Technical sales engineer

  National Instruments

• Vista - Error Codes: 80246007 & dt000 (cannot install Service Pack 1)

  I tried to install a 'Security Update KB2286198 critical"and the installation will fail.  The error message is: "WindowsUpdate_80246007" "WindowsUpdate_dt000"  I tried everything I could find on Microsoft sites, including the construction of a batch of repair to restart file BITS and something else.  That did not help either.

  Hi Mike,.

  Method 1

  Check if the Background Intelligent Transfer Service is started on the computer.

  To change or restart the Service (BITS) Background Intelligent Transfer

  You must be logged on as administrator to perform these steps.

  (a) open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  (b) double click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) right-click the service (BITS) Background Intelligent Transfer Service , and then click Properties.

  (d) under the tab general , next to Startup type, make sure that Automatic (delayed start) is selected. If not, select it, and then click apply.

  (e) side of the Service status, check whether the service is started. If not, click Start.

   

  Windows Update error 80246007

  http://Windows.Microsoft.com/en-XM/Windows-Vista/Windows-Update-error-80246007

  Method 2

  If fails it above step then try to download and install the update manually check if it works.

  Update security for Windows Vista (KB2286198)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=52748886-6280-4247-8CBD-F64DB229EE66&displaylang=en

  Update security for Windows Vista for x 64-based systems (KB2286198)

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=37648e95-05c2-4802-9a0f-660200baa229

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Services Web site deployment error "server returned nothing (no header, no data)" and much more

  I develop a VI on a large scale with a VI of web service combined in 2010 SP1. The "auxiliary" VI is responsible for storage of data capture and analysis as well as data and communications. It's big enough and communicates with the web method VI through shared network variables [and I use the DSC module to allow the management of shared variables of events].

  I can build and deploy the web method VI very well and it runs great. However, I need to communicate between the auxiliary and web method VI, and it seems that I can't do without including the auxiliaries vi when generating RESTful web services [also, is there a way to make this web service generates?]. When I added the auxiliary vi for the construction, he built very well, but then I got during deployment:

  "Server returned nothing (no header, no data).

  The next time I tried to deploy, I got a fake NI Auth dialog by this knowledge base article. By following the instructions for case 1 ["failure of Web application server since last started"], I ran Services.msc and found that NEITHER Application Web Service was not running. I tried to restart the service, but got this error:

  "The NI Application Web Server service on Local computer started and then stopped. Some services stop automatically if they have no work to do, for example, the service logs and alerts. »

  Knowledge base article suggests to restart at this point and I did, but I still see the same behavior. So really, I have a few questions:

  1. is it possible to deploy a variable library shared on the network through a local web service deployed and VI?

  2. What are the causes "server returned nothing (no header, no data)" in the deployment? A google search gave very little.

  3. what this means: "NI Application Web Server service on Local computer started and then stopped... '. "and what do I do to get my Web Application Server up?

  [to pile on the pile... I tried to re - activate the localhost:3580 Web application server and got an error. Localhost:3580 then offline also.]

  Thank you!

  Update.

  I noticed that the Web application server attempted to deploy the web service broken and choke her. There seemed to be no way to clear the .lvws created at the origin of the construction. I was able to remove the deployment folder to \UserServices\deployed\ $(WebServicesRoot)- , but it has been recreated from the .lvws whenever I tried to restart the service.

  So I called NOR and they told me this directory [XP]:

  C:\Documents and Settings\LocalService\My Documents\LabVIEW Data\WebServices\Standalone

  The .lvws has been in this folder. I deleted it and now I can run the ApplicationWebService. Apparently this file hidden undocumented is a "not-quite-bug" that is recognized as needing a fix in future releases.