VirtualCenter agent
Hello
I installed Vfoglight 6 on my virtual Center (Vsphere 4).
Installation and configuration went well but I can't retrieve all of the information of the virtual infrastructure that the agent does not seem to work.
I got the following error in the foglight web console:
VirtualCenter Agent::CommunicationException: Impossible to extract the data from the collector collector settings: the communication, System.ServiceModel... Channels.ServiceChannel, cannot be used for communication because it is in a Faulted state. Make sure that the collector agent operating system service.
Service are out of the race running and properly configured agent identification information.
Any idea?
Thanks for help
Take a look at the vFoglight server and check if the collector vFoglight & vFoglight connector services are running.
Then check the collector & connector that opens a session or is found by default in the following location:
32-bit operating system: program Files\vizioncore\vfoglight\vmware agent\ * .log
64-bit operating system: Program Files (x 86) \vizioncore\vfoglight\vmware agent\ * .log
-Larry
Tags: Dell Tech
Similar Questions
-
I have improved my Virtual Center 2.5 to 2.5 update 3. After doing this, I have 2 of my ESX v2.5.4 servers which will not reconnect.
I get the error message "Unable to install the VirtualCenter Agent service". I also see "the connection failed due to a bad user name or password" showing upwards in the list of tasks of VC. I don't know that I type in the good user/pass as I turn around tight and SSH on the server using the same user/pass.
I tried to do "service vmware-vpxa restart" on the hosts. What log file I look in upon the host server to find the real problem, and is there any other suggestions on a quick fix to try before the word is supported?
Thank you.
Here is a good link that will help you in the installation of officers
-
vCenter Server displays the error message: unable to connect to the host
vCenter Server displays the error message: unable to connect to the host
Symptoms
• vCenter Server cannot connect to a host when you perform operations such as:
•
o Storage vMotion
o cold migration
o cloning a virtual machine
o the model deployment
• Newspapers vpxd that contains an entry similar to:
[2009-06-04 19:27:16.326 error "App" 4444] [VpxdInvtHost] IP address change for 10.223.122.143 to 10.223.127.197 unhandled, verification of the SSL certificate is not enabled.
• You see errors similar to:
Unable to connect to the host o
o [2009-06-04 19:27:09.952 'Libs' 3902384 WARNING] [NFC ERROR] NfcNewAuthdConnectionEx: unable to connect to peer (numRetries = 2). Error: Unable to connect to the host 10.223.122.143: connection timed out
• vCenter Server shows the VMS as being disconnected then connected.
Hello
Resolution
Cause
This problem can occur if an ESX host's IP address is changed while being managed by vCenter Server.
Check the cause
To check the cause of the problem:
- Log in as root to the ESX host using a SSH client.
- In the file etc/opt/vmware/vpxa/vpxa.cfg, find the IP address of the host. The entry looks like:
10.21.48.121
Note: for more information about editing the files, see installation in VMware ESX configuration files (1017022).
Troubleshooting
If the IP address is incorrect, perform the following steps in order. If the operation does not resolve the problem, continue to the next step. Don't skip a step.
- Disconnect and then reconnect the host:
- Right click on the ESX host in vCenter Server and click Disconnect.
- Reconnect the ESX host in vCenter Server.
- Restart the VirtualCenter agent on the ESX host:
- Stop the service of vpxa with the command:
# service vmware-vpxa stop
- Open the /etc/opt/vmware/vpxa/vpxa.cfg file in a text editor and correct the IP address of the ESX host.
- Start the service of vpxa with the command:
# service vmware-vpxa start
Note: for VMware ESXi, you may have to restart all the management agents. For more information, see restart the agents on an ESX or ESXi Server (1003490) management .
- Rebuild the VirtualCenter agent on the ESX host configuration file:
Attention: this step removes all the Statistics counters historical host and the virtual machine. If VMware ESX host is running in virtual machines that starts in a permitted CVS environment, you maybe won't be able to add the host without stopping the virtual machines first.
- Right click on the ESX host in vCenter Server and click Disconnect.
- Remove the ESX host disconnected from vCenter Server.
- Backup the file vpxa.cfg with the command:
# mv /etc/opt/vmware/vpxa/vpxa.cfg /etc/opt/vmware/vpxa/vpxa.oldcfg
- Add the ESX host disconnected to the server vCenter inventory.
- Run the following command to view the contents of /etc/opt/vmware/vpxa/vpxa.cfg and confirm that the host IP address is correct:
# cat /etc/opt/vmware/vpxa/vpxa.cfg
-
Disconnected ESXi host cannot reconnect to VCenter
ESXi 4.0.0 Releasebuild-261974
VCenter 4.0.0 build 162856
VSphere 4.0.0 build 162856
I have a host on the 16 who became disconnected from VCenter recently. I spent some time online means to join new host in VCenter, but each has failed so far. I'm not avoiding perform a reboot of the host due to production VMS are residing thereon. Also, I can't access the Web page for the host, which works very well for the other guests, we have running: https://
I am able to ping both the IP address and the name of FQDN of the host successfully.
I did the following things in the hope of resolving, who all have failed:
1 restart the Management Agents on ESXi host from the windows of the customization of the system.
2. test the management successfully and rebooted network management network
3A tried to reconnect to the host via VSphere
4 registered and the Mode of Support Tech executed the following command: /sbin/services.sh restart when I run this command, I notice that the vmware-aam service does not start.
Error messages:
1. (in an attempt restore the link) cannot communicate with the specified host. The host may not be available on the network, may have a network configuration problem, or that the management on this host services may not respond.
2 (of the newspaper of the Management Agent) panic HttpNfcSvc another process is listning IDE oucederomsurlesecondport 12001; Please ensure that another instantiation of pass run; Cannot initialize the service of httpnfc.
3. (journal of the VirtualCenter Agent) 0x1499bb90 error 'App' could not discover the ofr is authenticating with host agent version. ; could not resolve version ofr is authenticating with host agent. ; Temporary creation connect spec: localhost:443.
4. (of the newspaper of the VirtualCenter Agent) 0x1499bb90 error 'App' SSLStreamImp::BIORead (0x2e408bb0) has expired; SSL connection failed with error BIO
[5 (journal of the VirtualCenter Agent) HttpUtil::ExecuteRequest] error in sending request - SSL Exception: transfer the SSL expired local: 127.0.01:63355 peer: 127.0.0.1:443
Any suggestions would be greatly appreciated! Let me know if you need to work as well with more information.
Thank you!
BOE
It is an ugly one. At least a restart if not re-install. To minimize downtime, you can close out of virtual machines to the inventory and put them on another host/cluster.
___________________
A +, EASD, MCP, MCSA, MCSE, MCTS, MCITP, MCDBA, NCDA, VCP4
If you find this or any other answer useful please consider giving points by checking the correct or helpful answer.
-
ESXi disconnects from the vCenter
Hello VMware,
I have some problems with ESXi 4.1.0 (Build 260247) disconnect vCenter. I am currently evaluating Vmware View. I have no problem connecting to an ESX host to vcenter. When connecting vCenter ESXi host host will connect for about a minute and then disconnect. VCenter, Active Directory, DNS, DHCP, and ESXi host is all on the same network without any firewall between the two.
I have an I tried by using the knowledge base article titled "Diagnose an ESX Server that is offline or does not respond in VirtualCenter" without success. I can connect the ESXi host with ssh and ping various servers on the network using dns and ip addresses.
Is attached a copy of the message, pass and vxpa journal of the ESXi host.
Any help would be greatly appreciated .
Since the log files, it seems that you use vServers 4.0.
Section for VMware VirtualCenter Agent, pid = 56646, version 4.0.0 build = build-208111 =, = exit option
The host ESX (i) 4.1 require vCenter Server 4.1, this is why you must upgrade to vCenter Server to make it work.
See http://www.vmware.com/pdf/vsphere4/r40/vsp_compatibility_matrix.pdf (page 3)
André
-
Hello
Not sure that this is right forum. Need for a forum of the license, but there is no such person.
Any body can help me?
I have strings of software below to "Add/Remove Programs", and now I need to choose those that require a license / who can be labeled "commercial".
I just spent ages looking for VMware client on the internet so see if they need an ilcense or if they are grouped. wihtout luck. So I can see it will take me forever.
So please, you can search the application that are 'bought' / commercial (and the rest will be then marked as "delivered".)
Thank you.
Tools-linux
Tools-netware
Tools-solaris
tools-windows
Tools-winPre2k
vCenter Orchestrator
VMware
VMware ACE Management Server
VMware Capacity Planner
VMware Capacity Planner for Virtual Center
VMware Consolidated Backup Framework
VMware Converter
Agent VMware Converter
VMware Converter Enterprise Agent
VMware Converter Enterprise Client
VMware Converter Enterprise Client 4.0.1
VMware Converter Enterprise Client 4.0.2
VMware Converter Enterprise Client 4.0.3
VMware Converter Enterprise of VirtualCenter
VMware Converter hosted Agent
VMware data recovery
VMware DiskMount utility
VMware GSX Server Setup
VMware Infrastructure Client 2.5
VMware Infrastructure Update
VMware Lab Manager
VMware Server license
VMware movie decoder
VMware P2V Assistant 2.1
VMware Player
VMware Remote Console
VMware Remote Console Plug-in
VMware Server
VMware Server Console
VMware Tools
VMware Update Manager
Client to VMware Update Manager
VMware Update Manager Client 1.0u2
Comments to VMware Update Manager Agent
VMware Customer Service Update
VMware vCenter Converter
VMware vCenter Converter customer
VMware vCenter Converter Standalone
VMware vCenter Converter Standalone Agent
VMware vCenter Guided Consolidation
VMware vCenter Lab Manager
VMware vCenter Server
VMware vCenter Update Manager
VMware vCenter Update Manager Client
Client VMware VDM
VMware VI Toolkit (for Windows)
VMware View Client
VMware View deal
Server VMware View connection
For the VMware virtual disk development kit
VMware Virtual Infrastructure Client 2.0
VMware Virtual Machine console
Importer of Machine virtual VMware 2
VMware VirtualCenter
VMware VirtualCenter Agent
VMware vCenter Server
VMware VIX
Script VMware VmCOM API
VMware vSphere Client 4.0
VMware vSphere Host Update Utility 4.0
VMware vSphere PowerCLI
VMware Workstation
VMwareVIRemoteCLI
vSphere CLI
all guests are grouped in and are free.
-
I installed the download infrastructure 3.5 but when I go to the Client from VMware infrastructure and go to help, about, he mentions VMware Infrastructure Client 2.5.0 and VMware VirtualCenter 2.5.0. Is this correct?
Also, I have company of issuing licenses and in the Configuration, features licensed, it shows the "license server" correctly listed, he said ESX Server Standard is approved for 2 CPUs, but he said always 57 days remaining on the upper right of the GUI and it says "unemployed" for the VirtualCenter Agent for ESX Server.
I have something incorrect installation?
Search for your data through the VIC warehouses, look at the name of the folder of your template. In there, you will see a .vmtx file. Right click on it and "add to the inventory.
also, don't forget to award points marking answers as "correct" or "useful".
-
Question about VMware Foundation Acceleration Kit
Sorry if this is a stupid question, I don't get frequent on licenses for the stuff. Ive looked at the PDF licenses and below shows the paragraph that confuses me a little. The Foundation acceleration Kit only allows you to run ESXi?
Ive got 2 sites that I need installation, one with 1 x VC server. 2 x with 2 x cpus esx hosts each and another site running a different copy of VC, 1 host ESX x with 2 x CPus.
What would be the best option?
+
VMware Infrastructure 3 Foundation acceleration Kit
+
includes three licenses of VMware Infrastructure 3 Foundation.
It's VMware ESXi, VMware Consolidated Backup,
VMware Update Manager VMware Virtual SMP, VMware
VMware VMFS and VirtualCenter agent. They also include
Server VMware VirtualCenter Foundation, which provides
VMware Guided Consolidation and the ability to manage up to
three hosts Server VMware Infrastructure 3.
Non-it allows you to run ESX or ESXi - the only thing you need is another license server VC since the acceleration kit only comes with one license of VM - Foundation
If you find this or any other answer useful please consider awarding points marking the answer correct or useful
-
Path to upgrade VMware ESXi Management Kit
I am interested in the offer of VMware ESXi Management Kit, but want to know if it will work with our plans for the future. I am particularly interested in the vCenter Foundation to allow us to track the performance of the server.
At the moment we have an ESXi server and could get a second in the near future. End of the year, however, we plan to invest in standard with HA or possibly Enterprise with VMware vMotion. That we will be able to use the Foundation of this package vCenter in this future configuration? The host licenses are only for ESXi and we will have to buy new ones? If we do not upgrade vCenter or host is a way of evolution at discount prices or we will have to buy new ones?
Budget is a problem then if we cannot reuse this in our final configuration so I won't be able to justify the cost.
Thank you.
vCenter Foundation lets you connect an ESX host 6CPU value. Is not serious ESXi or ESX. If you use two connectors boxes, then as soon as you add a 4th host computer, you will need to update your vCenter license. There is a reference number which allows a foundation upgrade to vCenter Standard. What it is offhand, I don't know, but your dealer can help you with that.
In regard to 'free' with vCenter ESXi usage, you can not. You must register (at least) Foundation for each ESX/ESXi host, you want to manage via vCenter. Pay the $995 (list price) gets you the "VirtualCenter Agent" that is needed to connect to vCenter. Note: You can install ESXi, play with it for as long as you want, but once you want to attach to vCenter, you will need the license... but there is No change to the ESXi host... you just load the license file in vCenter and you'll be all set.
Hope that helps!
-
Cannot add host esx VC2.5
Hi all
I'm having a problem to add the new host of esx 3.5 U3 to VC2.5. The VC and esx server are the new facility. They both connect to the same subnet.
The Victoria Cross error message is "impossible to install the virtualcenter agent service".
Thank you very much.
Hello
Take a look at this.
http://KB.VMware.com/kb/4223326
If this does not help then you will have to manually copy this vpxa strenuous VC server to ESX Server and install it.
Thank you
Samir
PS: If you think the answer is useful please consider rewarding points.
-
Agent backup and VirtualCenter Server on the same computer?
It's maybe a stupid question but I in the phases of planning for virtualization of a bunch of servers I know none better yet.
We will use Tivoli Storage Manager for snapshot backups and files.
Can I have the same physical machine Act to the virtual host and backup VCB agent or if it was a separate machine?
We will have 2 LUNS on an iSCSI Equalogic PS500X and 10-12 VMS box.
Thank you
Jeff
It is possible, but not recommended. This was taken from the VCB release notes:
VirtualCenter 2.5 and Consolidated Backup can coexist on the same system. However, because the Consolidated Backup proxy has to be locked down as much as possible, VMware does not recommend this configuration.
-
Hola y buenos dias
me esta dando este error cuando a UN con cluster 2 hots the digo el HA assets. There buscado por internet y the mayoria of las hacen referencia a lo mismo responses:
The config of VMware high availability (HA) falla con el error: unable to complete the configuration of the HA agent on the host
- Select turn on VMware HA, luego elija VMware HA desde el cuadro of the izquierda.
- Select Advanced options.
- Adicione opcion das.bypassNetCompatCheck con el valor 'true '.
- Haga click OK in the options advanced, luego haga click en OK again pantalla para aceptar los cambios in el cluster config.
- Hope a todos los servidores ESX in el reconfiguren HA cluster.
-
Error al add storage (datastore) en virtualcenter
Buenos dias
Tenemos una infrastructure of various host esx 3.5 gestionados por un virtualcenter 2.5 desde hace varios Años. Desde hace unos Días me da UN error cuando intento add storage para crear a datastore para lo tengo are presented as nuevo has los una cabina of 300 Gb. Para ello selecciono a LUNs esx host, voy known config pestana, a storage y al boton Add storage. Cuando en el lugar del Assistant in pincho para anadirlo, unos segundos espera obtengo el siguiente message after:
The query failed because the remote server has taken too long to respond
Y is no puedo hacer mas, don't con lo than no puedo crear el nuevo datastore y lo Necesito UN ago that los current estan casi llenos. He reniciado el virtualcenter don't sin any resultado y ahora mismo no se por donde depower.
¿Alguna idea? MUCHAS gracias por adelantado.
Kind regards
David
Hola Sorcerer1210:
Dick as screams datastore en el a host y luego escanear in el resto are suficiente. If son datastore diferent there you da problemas in algun don't host agent deberias reiniciar el y no ser asi el host completo.
A greeting.
-
A delay was trying to send a command to the VirtualCenter or ESX Server.
Anyone have recent experience with the following error and could perhaps enlighten us?
Finished status: failed
Final error: 0xe0009563 - a delay was trying to send a command to the VirtualCenter or ESX Server.
Final error category: resource errors
Thanks in advance,
Phil Couto
After some serious research. Found that Symantec Backup Exec agent VMware was not instant deletion after their creation.
Created an additional snapshot and then delete all the snapshots. This all cleaned up...
Kind regards
Phil Couto
-
vCenter Agent will not start - ESXi 4
Hi all
New install ESXi 4 on a Dell 2850. Try to get VMware Infrastructure to connect to the ESXi 4 server and no luck. Looking at the configuration of services running on the ESXi 4 server in the security profiles, the VMware vCenter Agent service does not run. Try to start the service and get an error of "error during the configuration of the host: Tried to restart the server ESXi, no luck. A virtual machine installed on it, seems to work otherwise.
Any ideas?
Thank you
Marty
Using Vmware Infrastructure Client 2.5.0 and VMware VirtualCenter 2.5.0
So you are you using VC 2.5 and FORMER client.
You need NEW VC and the NEW vSphere Client.
André
El tema are that he made lo go y sigo don't con el mismo error y no lo tengo claro what me escapa.
OS explico mi arquitectura
Cluster development: 2 hots ESXi HA con 4.1U1 en mi red (the same as el vCenter)
Maybe you are looking for
-
Please excuse my ignorance, but these things are computers and I'm a bit of a luddite. I guess that by updating my new F55 with ver 1.14 include also features of the previous firmware updates (charge of the camera came with v1.0) thus eliminating the
-
HP Compaq nc6400 Laptop - recovery CD
Hello I just bought a 2nd hand HP Compaq nc6400 laptop (XP Professional) and it did not come with Recovery CD, so I wanted to know if there is a way for me to create these. I want to create a CD of recovery like that normally, you get when you buy a
-
I have McAfee total protection on my laptop, can I activate windows defender toggle?
I have McAfee total protection on my laptop, can I activate windows defender toggle?
-
PIX, VPN, PAT and static
I want to activate an incoming and outgoing VPN on a PIX configured with PAT. I enabled ESP and UDP/500 on the appropriate access to the lists, but must provide a static for inbound traffic. I already use a static for incoming SMTP traffic, and I don
-
The upgrade of FWSMs pair of failover
Due to the bug, we are modernizing our pair of double chassis FWSM tipping from 1.1.2 to 1.1.4. I want to minimize service disruptions, can someone point me to some documents or to explain briefly the best process. 2.2 documentation it appears I can