need for a starting point

Similar Questions

• I have a red circle with a line through it on my need for speed Shift II in my Start menu, the game does not open

  Problem: I have a red circle with a line through it m need for Speed Shift II in my Start menu.   I have never had a red circle with a line pop up on any program in my Start menu, I wanted to know why it happened and how to fix it. The game accepts updates in the form of 'Add packs' of special vehicles in the original site via the EA download manager sports. So I guess that the game is installed correctly, but the game will not open and run at all, not from the start menu, or by clicking the desktop icon. Any help learn more about the red circle with a line about my program and what to do in case it happens again.

  Recently, I installed my Windows 7 Ultimate OS on a SSD which had been replaced because of a total failure of the car. I've updated the operating system with all

  latest updated windows and the updates of my video card, motherboard, HHD and SSD updated; Thus, all the hardware and software are up to date.

  I was going to restore the disk using last good upward from the orginal SSD before he died a month or two ago. So I think this will probably fix my need for speed II problem, but since it's the first time I've ever seen this problem with a program I would like to know how to cope.

  Any help would be greatly appreciated,

  Take care. Skyraider33

  I've never seen what you describe in the Start Menu, either

  You have a new installation of Windows on your new SSD, Yes? If the game is on another HARD disk,
  is that what you did re - install the game after installing the new Windows?
  Otherwise try to reinstall the game and origin. He would register
  entries, both in the previous installation of Windows.

  If this does not help forums EA would probably be a better place to find out if the
  mods are the source of the problem.

• Do I need an additional access point to use my iPod touch for audio books? It's using iOS 9.3

  Do I need an additional access point to use my iPod touch to listen to audio books.  The iPod is on iOS 9.3 and my iMac on OS 10.11.4.  I can get the books from the library using the OverDrive Media Console software, then by moving the iTunes audio book using 'add to library '.  Then, it presents itself in music and can be downloaded from there to the iPod.  The audio book also appear in the section music from iPod.  The problem is, most of the time, no list of book sections appear on the iPod and the iPod plays sections in random order instead of sequentially.  I can't find anything in the guide of the user on audio books.

  Can you import into your application iBooks on Mac and then sync it with your iPod?

  See chapter iBooks of:

  http://help.Apple.com/iPod-touch/9/#/iphbaeb5b5cb

• Starting point for workspace confirmation message

  Hello

  Is it possible to have a confirmation message to the workspace of starting point.

  

  I want this message box at the initial stage after the starting point to submit the form of the workspace to the workspace.

  Thank you and best regards,

  Chalukya.

  "Not possible until you customize the workspace!"

  Nith

• Where can I find the Bonjour service, I need for sharing of home from a Windows 7 Desktop?

  I just downloaded iTunes 12.4.1 and apparently I need good morning services for home sharing.  Where can I find this service?

  For general advice, see troubleshooting problems with iTunes for Windows updates. First, install the missing components.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, must revert to a previous version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• My laptop is operating completely normally and would never shut down on its own. __But when I try to play a game or during the plauing sometime example pes 2010 or need for speed, my laptop some time Shut down.

  My laptop Qosmio F50 works completely normally and would never shut down on its own.
  But I try to play a game pes 2010 example or the need for speed, my laptop long closed.
  It was good before, but after rebotting my computer this problem just recently started...
  I have Nvidia Geforce, DirectX 10 and all recommended Requirments for the games but sometimes I start a game or after 2 or 3 housr game it would be completely Shut Down My computer and when I would turn on the computer, he would say that it was not Shut Down normally.

  Alhajji,
  They suggested to do a factory restore, if a valid step to do.  I know this isn't the most fun thing to do, but if you restore the system failing factory (clean install of the operating system).  Then, run Windows update and update drivers.  At this point, you can install a game and test.  If the problem persists, it would look to be a possible hardware problem with the system.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Post a message (need for clarification)

  Hi all
  This is going to be a long post, because I want to give good background.

  I wrote a message on the cancellation of the automatic updates. Here, it is pasted:

  "I have an old HP Pavilion dv7-4180us Notebook PC using Windows 7 Home Premium. It seems that I can never stop automatic updates. There is a problem.
  On the one hand, we are informed to install updates to keep our machines running well, up-to-date, to increase security. But I found that when these control sooner or later my computer, that my device is malfunctioning and I have to run the system restore.

  QUESTION: how to cancel - once for all - automatic updates all the?
  QUESTION2: How do you know which programs are bad operating system and are necessary?

  The damage has been done is usually a bad slowdown in operations. Start-up takes longer, opening files is slower, and I got an impossibility to open my system thanks to the fingerprint recognition.
  About me:
  -00359 - 899 2687 OEM product ID - processor: Intel (R) Core (TM); 5 UC; M 460 @ 2.53 GHz
  -Memory (RAM) installed 4.00 GB - system Type: 64-bit operating system
  -Prod. No.: XG834UA #ABA
  All comments welcome. Thank you. »

  (end of my first message block)

  A response has been sent by a peer:
  He pasted my original message in the upper part of his, then added the comment below. I have stick.

  "Windows updates are updates most of the time required of course there are glitches but then you must restore to the last frame of work and try to update again." Constant updates is a good indicator of your operating system is corrupted and you need for your system back to factory recovery install and update again.
  -First follow help links.
  Do not know how to display help click on the following link.
  First time here? Learn how to post and more
  -For disk recovery only.
  Get a HP USB recovery or HP recovery disc drive
  Read this before ordering your recovery discs! (United States and Canada only)
  Don't PM me if you do not allow PM in return. »
  (end of message from One Peer, glued)

  I tried to send a response to a peer. I clicked on the button "Answer" in the bottom right of his message, but my answer is back to my original thread. The 1st link in the message is 'Learn to use the forum.' It is said (stuck),

  A brief subject title including:
  • Name of the product
  • A brief description of the problem
  • A detailed message with the following information:
  o name of the product and operating system
  o How do I find my product name and number?
  o Description of the problem, including:
  o error messages, if applicable
  o changes to your system until the problem occurred
  o do not include the serial number of the product or personal information.
  (end of dough)

  With this link, I guess that a counterpart found my original post did not argue correctly. BUT: I entered the information about the product. on my first line and below the o/s. According to info. the link, I did everything that I need.

  QUESTION: was my insufficient message following protocol?

  Approved One also said in his message, (quote is pasted): ' don't not PM me if you do not allow PM in return '.
  In my attempt at a peer response, I wrote (pasted below).

  "Your last comment, ' Don't PM me..." If you do not have... "
  Could you explain that? Do you have I have somewhere a "PM" option for answering machines cannot delete "PM" me? Not to my knowledge. Finally, please be so kind as to explain what is "PM". "(end of dough)

  QUESTION: given that my answer to the q. above might not have reached a counterpart, can someone pls. specify what is "PM"?

  Another issue is the link 'Learn to use... forum.' A link on this link goes to "" tips ask the ' very best Question. "» "I opened that and saw this picture:

  

  In the image is "CNF". It's a serial number. Confusion which is on the first link "learn... use... forum", it is said, 'Do not understand the serial number of the product, or any personal information'.
  Please clarify this discrepancy, betw the statement and the image.

  LAST QUESTION: want to post this message, I thought that it wasn't on laptops, then search "HP Expert Forum. However, under "Choose a Board" has a long list, then "Show all" and "HP Expert Forum" comes. However, by clicking on it, I can't see in the empty bar where I need to place it. What I am doing wrong?

  Please follow the long message. All responses appreciated.

  AtAF

  I can't answer all your concerns. I will try to answer some of your questions and give you some places to look for answers.

  ---------------------------------------------------------------------------------------------------------------

  P.m.s are Messages private, somewhat like a mail between posters, but always using the guidelines and the presentation of the general forum.  In general, most people have this feature enabled.   I have impossible (not) comment in particular on the use of any Expert of the service.

  More information: How to send a private Message

  ---------------------------------------------------------------------------------------------------------------

  The bit about Product Information reminded members do not provide the serial number of their computer.  People post their serial numbers, their send addresses, same numbers on occasion.  It is an invitation only and we strongly advise anyone to publish personal information on this public Web site.

  ============================================================================

  Windows updates

  Everyone has an opinion about updates.  On a Windows 7 system, the need for updates - once the system is installed and the main updates are installed, AND assuming that it does not install no matter what additional programs or software - is mainly to preserve the system of some security problems are hiding everything.

  If you want to turn off Windows updates, then do it.  You are the admin.  It is your machine that is at risk - or not - and it is your decision to make.

  You can switch automatic updates / stop in

  Control Panel > set view icon > Windows Updates > settings

  Windows updates - turn auto update or disable

  ============================================================================

  Essential programs

  As a general rule, you must the programs running on the computer when it starts up which are included in the list of programs in the system and Microsoft programs in your startup file configuration list.

  How to use MSCONFIG in Windows 7

  Note the general Word - depending on what you have installed on your computer, your boot file can be filled with, well, an interesting range of programs that can indeed have slowed down the performance of your system over time.   Yet once, however, most of the programs - unless they are poorly written, or you forced them into the startup sequence when they belong there – are not by themselves slowing down the system by law "to be in the startup list.  In other words, you might consider doing some homework before snatching the programs in this list.

  ============================================================================

  -Comment-

  Your computer contains only 4 GB of RAM and he is older; We say "vintage".  This is not to start with a lot of resources and Windows 7 can, in itself, consume a lot of what is available.  Windows 7 is greedy.

  Add a gourmet operating system, a file system (perhaps) fragmented, a couple of badly written programs (bad code), less fast blazing to the Internet, and you might have the recipe for a slow computer.  I'm not saying that your computer is under one of these weaknesses, only that many computers don't have these problems.

  -------------------------------------------------------------------------------------------------------------

  Resource monitor

  Resource hogs could be traced using the resource monitor.  Even on Windows 7, the tool is pretty sophisticated. You can spend time learning how to use it effectively.  However, the program is very effective to help you quickly catch programs that are hogging resources (memory and network, for example) that you have available.  For example, if you have a program that took all the memory and ran Amok, so to speak, the monitor will be able to quickly show what offending program to the wrongdoer.  In most cases, you can kill the culprit (identify, right-click > kill).  If you trash your system and really hang things up, press the power button and accident-shut down the computer.  You really want to do it very often. but every Admin has made at least once a clearing.

  -------------------------------------------------------------------------------------------------------------

  Maintenance

  If the system is corrupted due to lack of maintenance, then you can provide this service by giving him some of the attention, he needs without actually going and perform a complete restore.  (Shudder).    Good maintenance, especially on a vintage with a limited capacity system helps the computer make the best use of its resources.

  Good care tips can be found here:

  Improving the performance of the system without adding memory (Windows 7)

  -------------------------------------------------------------------------------------------------------------

  Fingerprint login

  After that all other maintenance was performed, it is possible that the following might help to restore the connection of fingerprints.  Understand that I have NOT used digital personal in a certain number of years and this is a quick overview of the subject.

  • Create a Restore Point: create a restore - Win7 Point OR create a restore point Win8

  If you use a laptop:

  • Close all your programs and shut down your computer
  • Unplug everything (little unifying for the keyboard / mouse external can stay)
  • Perform the Hard Reset for your model of laptop
  • Start the computer and connect
  • Reinstall your driver validity sensor:

  validity sensor Driver V2.1.0.2 RevA Win7 sp52354

  • Restart the computer and log in
  • (Re) Install the Digital Persona software

  sp50048 Digital Persona Fingerprint Reader Software V5.1.0.175 Rev A

  At this point, I restart the computer once more and sign in, although this software is so robust that you could get away with jumping final restart.

  Reference:

  HP Pavilion dv7-4180us Entertainment Notebook PC Drivers

  -------------------------------------------------------------------------------------------------------------

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer provides a fix or a workaround!

• Need for Speed Most Wanted does not work in Win7

  Hello

  Recently, I installed Need for Speed: Most Wanted in my laptop. When I start the game, nothing happens. No flash, no error message display any. I've updated all my drivers through my software manufacturer provided laptop computer. I tried different compatibility settings. Nothing has worked. Please help me in fixing this problem.

  Here is the configuration of my system:

  Operating system: Windows 7 Home Premium 32 Bit
  Processor: Intel Dual Core T4400 2.20 GHz
  Memory: DDR2 4 GB
  Display driver: Mobile Intel (r) 4 Series Express Chipset Family
  The display driver version: 8.15.10.1892

  Thanks in advance.

  Kind regards
  Selvin D

  Hi Laurie Dhavidhu,

  Game Need for Speed is compatible with the windows operating system 7. You can check the Compatibility Center in windows 7.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
   
  Follow the steps below:
  1. open your NFS directory.
  2. right click on speed.exe and select Properties.
  3. go to the Compatibility tab
  4. Select the Compatibility Mode for Windows XP (Service Pack 3) and run resolution 640 x 480
  5. now run your game and have fun!

  Note: to start the game you have Administator Privlages.
  Also perform the clean boot on the computer.
  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
   
  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.
   
  Follow the steps below to put your computer in a clean boot state:
   
  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
   
  1. sign the computer by using an account with administrator rights.
   
  2. click on the Start button, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
   
  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
   
  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
   
  Note following this step lets Microsoft services continue to operate. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  5. click OK and then click on restart.
   
  Check the link to learn more about the clean boot below:
  http://support.Microsoft.com/kb/929135
   
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click the Start button, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  2. on the general tab, click the Normal startup option, and then click OK.
  3. When you are prompted to restart the computer, click on restart.

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Starting point of the CSA

  We are deploying CSA ver5.0 in our society. I read 2 books for Cisco Press but wanted to get an idea of what real companies use as their groups. We have all the windows, all Types of desktop computers, remote desktop or Mobile and CTA. Everyone thinks it is exaggerated or under the protection of a starting point?

  The only problem we encountered so far is that the IBM portable computer touchpad driver is detected as an untrusted root kit. If someone met what I'd like to hear about your solution. TAC still works with us on this to create an exception that works.

  Thank you

  Dvergau,

  I think it is maybe too kill to a pilot group. That is where I hope you intend to start. You want to import a little, you decide what is a little, then slowly adjust and Add. What I mean is that you need to adjust these rules that block the operation. Then add a little more political and other.

  Many people have several ways of doing things. Some suggest simply use the wizard for all, many will tell you to clone all groups and modify those that don't. Cloning is a pretty smart way to keep a reference point. Yet once again, I suggest you start small and build up to the reference level.

  Regarding the rootkit, it's tough. The only way to allow the rootkits are to use the wizard. The wizard will make the hashes and application and the exception. I found a similar problem with Symantec. Leaving me the only option to disable the notification, or to add hashes on the fly.

  Hope this helps, if you need just to all creation information and politics rule. I'll help you better than I can.

  Kind regards

  Christopher

• A beginner... need for basic assistance

  I see that my camera Sony's AVCHD a 'private' of the file yields that, once seen from within Premiere Pro or prelude of yields. MTS files which can then be swallowed. So far so good.

  My question is help on the most basic level, to help me get started with Prelude. All I want to do is to get a glimpse of these files in the prelude. They keyboard shortcut to place point doesn't seem to be a simple 'I' or 'o' as it is as a prelude - is this true? I'm having trouble getting this simple step to work. Then, I would like to make subclips and I see the number key 1 is the marker for the beginning of a sub-clup, but what is the marker for the out point of a subclip? The interface is nice and this could be an excellent software to learn, but this is easier to do in Premiere Pro and just eliminate the need for Prelude?

  Maybe I need a video tutorial, but also, perhaps the questions I ask here are too basic for a tutorial.

  Can someone please help me with just these questions early so I can see the value in using prelude?

  TIA,

  Ken

  Ken > prelude allow you to ingest your assets (either via Basic linking, copying or transcoding), batch rename them it's make and apply a system of metadata personalized for them. You can't do these things first. In addition, the development of interface on logging, which makes this task easier.

  And out of the points only have meaning in the capture Panel, where you can specify an in or an exit if you do not want the whole media to be ingested. The shortcuts are indeed I and O. You do not change anything that happened first edit as a prelude, so to point on media ingested is not really logical, use subelements markers instead. I and O in prelude is used to set these points and exit markers.

• How can I change the starting point of a path?

  It bothers me when I use brushes for a path shape/access line. Is there a function to change the starting point of race in the direction of the form/reverse of a path?

  You won't need to duplicate the path. Just select it and then change the options for this object. There is a button in the Panel forms for this.

• Need for documentation and references for idXml

  We decided to go with the TPM/OID/OAM of sun ldap and siteminder.vWe have oracle fusion middleware installed with SOA suite and OSB.
  
  Now, I need to make the point of contact for connection to the above CRUD operations and performing of OSB.
  
  Where should I start.
  
  I have the link below. But there are also a lot of documentation in the link below and I'm confused.
  
  
  http://www.Oracle.com/technology/documentation/oim1014.html
  
  
  I was told I should use IDXml.
  1. I am looking for documentation of IDXml and
  
  2. all the sites that help in the realization of connectivity OID/OAM/OVD and perform CRUD operations.

  See the OAM developer guide

  http://download.Oracle.com/docs/CD/E15217_01/doc.1014/e12491/idxmlows.htm#BABEJABJ

  Hope this helps,
  Sagar

• Using the coordinates entered to set the starting point of a Tween

  Hello
  
  I have a movieclip 'pano_mc' that moves around through the movement of the mouse, there is a hotspot (hs1_mc) nested within it (which moves with the Pano_mc), I have a hs1_mc event delivery, once pressed allows me to get the x and y 'pano_mc' at the point of delivery, I need a way to use these x and y corodinates to set the starting point for the interpolation , on Pano_mc.
  
  Cannot use 'this' (as shown in the link above) that the event is on the hs1_mc and if I just use '_x' interpolation setting, it begins where the film is originally and not where it is when the delivery is executed, where I get the cordinates right here.
  
  
  var hotSpotTweenX:Tween = new Tween (pano_mc, "_x", mx.transitions.easing.Elastic.easeOut, 0, "400", 3, true);
  
  Is there a way to fill '_x' with the var newx:Number = stagePosition.x; who holds the accurate cordinate of the pano_mc at the time of the press...
  
  I need to be able to use the coordinates xy of the pano_mc captured by the delivery, to set the starting point of the interpolation which then tweens the movie at a predefined point... create an interpolation of seemless...
  
  
  Can anyone shed some light on this... Thanks in advance

  "_x" isn't the starting value. This is the property you're interpolation. your ' 0 'is the starting value and your '400' (which really shouldn't be in quotes) is the value of end to resolve your problem, use a variable instead of ' 0'.

• How do I not what SATA driver do I need for the Satellite L300 - 03C

  How do I not what SATA driver do I need for the Satellite L300 - 03C so I can make nlite

  Hello

  Your laptop seems to be a Satellite L300 - 03C PSLB8C-03C01X.
  As already indicated on your first visit to thread the Toshiba Canada page and choose this model of laptop on the driver page.
  http://209.167.114.38/support/download/ln_bymodel.asp

  Then download the Intel Matrix Storage Manager (SATA) - image of floppy drive. It of for Vista, but the files in this package should work with Win XP too.
  Include these files using nLite to create the new disk Win XP that contains SATA drivers.

  Finally use this disk to start.

• How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point

  How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point. I've been messing around with the without success. I'm under Labview 2012.

  Thank you!

  Townes wrote:

  I can't understand what you mean. I have no formal training with labview. It took me a long time to write the simple program that I joined. Any guidance would be greatly appreciated!

  Its pretty normal for a beginner to take the time to write code. Right-click the map of waveform > Create > property node > historical data, you will get a property node, keep this at the beginning of the code and create a constant. You can also go to the VI properties and > run and select "clear indicators when it is called.

  I recommend you to go through the basic materials of LabVIEW which will give you an understanding on the basics of bases/components of LabVIEW.