VGA, usb or DVI?

Similar Questions

• Hi the Multiport card of VGA USB - C come with the new Mac book

  Hi, can you please tell me, the Multiport VGA USB card - C comes with the new Mac book or you purchase separately. Thank you, Rob Council

  N ° can be purchased at the same time, it does not come with the computer. It only comes with the charger cable and AC adapter.

  See more Tech on the MacBook HERE

• Should I connect to the display, the vga cable and dvi cable at the same time. HP 1110 FP7

  Should I connect to the display, the vga cable and Dvi cable at the same time. I have a FP7 1110

  UNUSED - a connection only (from the source of the same cylinder head box) - always!
  DVI has better quality.

  C.

• No input vga no signal dvi or

  I just bought a custom built Gamining PC. Every now and then when I start the pc I get the message "' NO signal vga input / no monitor DVI input signal go to sleep" I turn off the pc and wait a few minutes and then try to start the pc again. " After about 3 to 4 times to go through who / pc boots fine and desktop is displayed on the monitor.  So, what could be my problem?  It sounds as if there is a problem with my video card?

  TlWilliams,
  Thank you for visiting the Microsoft Answers community forum.

  Yes, that sounds like a video card problem.  Or it could just be a cable or in bulk.  Check the cable that goes from the video card to the monitor to make sure you it is connected at both ends, try change if it is editable, turn off your computer and reinstall your video card (take out and put back) If you are comfortable doing this, or contact who built to allow you to take a look.

  Let us know if we can help you.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• USB to DVI external video card

  Have the same problem as a lot of people. I want to run to the monitors off my laptop (inspiron 1525). Buy an external usb/DVI will do that? I DON'T want to have two of the same poster. I want to be able to do something on one screen and something different on the other

  
  

• Satellite P100: Can I connect two external monitor to the VGA & DVI port at the same time?

  Satellite P100 comes with two port external monitor. One VGA and one DVI. Can you have two external monitor works at the same time? Can you have two external monitor as well as your internal screen working at the same time (for a total of 3 screen at the same time?

  Here's what I confirm:

  Internal display + display DVI connector
  OR
  Internal display + screen VGA connector

  Is it possible to have:

  Display connector DVI + VGA connector display?

  OR

  Display connector DVI + VGA connector screen + internal display?

  As far as I know, this is not possible and you can use a DVI or VGA port.
  Output signal can be used only a single port for external monitor.

• How to connect the new monitor dvi to vga port

  Today taken a new Samsung BX2240X monitor and it has ports dvi or vga, computer has just vga. Can I use an adapter or a new video card is necessary. Computer Compaq 4010 is a pci express slot on the mobo. The PSU is 220w and the + 12V - 16 Hope a. I gave enough information sure Big Dave will be my response makes a male vga adapter to dvi female, but the PIN to dvi outputs look like mine.

  The best picture would be obtained using a video card with DVI connector.

• Adapter VGA DVI - HP 3500 Pro

  Hi all

  Recently, my boss bought a bunch of HP Pro 3500 s. They come with a VGA and DVI, port that we use both for a dual monitor set up. Now when we connect to these ports by using a VGA cable and DVI set up works very well. However, when we use a VGA DVI adapter DVI port, the second monitor is not detectable. Is there a way to solve this problem, so we can use the adapters? Any suggestions would be greatly appreciated.

  Thank you

  SJ Wolf

  You use the built-in ports in the mobo?
  One is other vga and dvi?
  Is the port dvi - d (digital) dvi or dvi - i (ntegrated) - see wiki:
  http://en.Wikipedia.org/wiki/Digital_Visual_Interface#connector

  Sorry for so many questions, but I can't find a document for this pc that displays the ports - just this one:
  https://h20565.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/kb/docDisplay/resource.process/?spf_p.tpst=kbDocDisplay_ws_BI&spf_p.rid_kbDocDisplay=docDisplayResURL&javax.portlet.begCacheTok=com.vignette.cachetoken&spf_p.rst_kbDocDisplay=wsrp-resourceState%3DdocId%253Demr_na-c03550750-1%257CdocLocale%253Dde_DE&javax.portlet.endCacheTok=com.vignette.cachetoken

  If the port is dvi - d adapter-dvi2vga does not work...

  C.

• USB - Dvi resolution problem

  Hello

  I bought a Usb-to-DVI transformer ( http://www-307.ibm.com/pc/support/site.wss/MIGR-72682.html or http://shop.lenovo.com/SEUILibrary/controller/e/web/LenovoPortal/en_US/catalog.workflow:item.detail?... )

  )

  I want to connect a Dell 3007WFP to it. But it does not recognize the good resolution and I can't change it.

  I already read that it is possible that the software is not being able to read the screen settings.

  But I don't think that this is the case it because it acknowledges the screen and recognize the name etc...

  I use a link cable double dvi DVI-D(which is needed for high res screens see: http://en.wikipedia.org/wiki/FileVI_Connector_Types.svg)

  It is located in the resolution 1280 x 800, which is really convenient for a 30 "screen.

  but in the mode single link your LCD supports resolution 1280 x 800.

  the 30 inch combines two channels of 1280 x 800 to give you the resolution of 2560 x 1600.

• j5create usb dvi for monitor flat screen display adapter

  I received a box that popped up when I was installing a usb to dvi display adapter model jua230 on my windows xp pc. He said I need to check compatibility and check to see if it passed the windows logo test. Is it okay to install on my computer? I'm trying to fix a flat screen to a processor that does not have a dvi port. The warning said that it could possibly cause problems for the computer in the future.

  Thank you for your help.

  Hello

  The message seems to be due to the fact that manufacturing had not their WHQL certified driver. The device driver can still install and the device might work. The message is a warning that the driver has not been tested.

• VGA/DVI

  Hi guys,.

  I have a winxp running T61p.

  I want to connect my laptop (undocked) to an LCD monitor. Since I want to see more bright colors, that I would use option dvi monitor that I bought.

  Here's my question:

  T61p isn't a dvi each output. Yet, I know we can change some settings in the bios to support dvi - d.

  (1) dvi only works when the laptop is connected? I ask this because only the docking station output a dvi.

  (2) if the answer to the first question is "no, you can always use DVI even if your laptop is in stand-alone mode.

  How?

  Can I get a digital signal from my laptop vga port? Can I make a connection between the port vga (portable) and dvi (from monitor) port? Can I get a digital output even if I do a link between the vga (mobile) and (from monitor) vga port?

  Thanks for any help...

  DVI works only when it is docked, your VGA output is only the analog signal.

• C60 DVI input 3 Auto Detect using a DVI to VGA splitter

  Hello

  We install a codec C60 using a splitter DVI input n ° 3 for the presentation source (DVI - I male to DVI - D & VGA Splitter cable's female adapter)

  The DVI input source is configured as Auto-Detect.  Administrator's Guide confirms this seting automatically detects the signal is analog (VGA) or digital (DVI or HDMI).

  The problem is the codec can't really switch from one source to another.   We do not seek to send two signals at once, but rather stable wether VGA and HMDI will be detected by the codec according to the entry sends the laptop.

  can anyone confirm if this is a limitation of the codec, or bug in firmware or even simply impossible without adding additional hardware.

  see you soon,

  Mel

  Hello

  Yes, auto-detection works for me.

• How can I connect another monitor to compaq SG3 because there is only 1 VGA port and no HDMI.

  How can I connect another monitor to compaq SG3 series because there is only 1 VGA port at the back and there is no HDMI port.  The operating system is Windows 7. I think to buy vga splitter, I don't know if that will allow me to move images/data between the monitors. Please tell us what to do. Thank you

  It is based on the expected results.  A VGA splitter will give you two monitors but they will display the same image.  If the expected result is two different pictures, maybe something like this will do;

  http://www.Amazon.com/IOGEAR-external-video-card-GUC2015V/DP/B000NJFJJK

  or

  http://www.Amazon.com/STARTech-com-external-video-monitor-adapter/DP/B005G306I2/ref=pd_cp_e_0

  Some will also do DVI: http://www.amazon.com/Plugable-Multiple-2048x1152-1920x1200-DisplayLink/dp/B0038P1TP4/ref=sr_1_1?s=electronics & ie = UTF8 & qid = 1345919878 & sr = 1-1 & keywords = usb + to + DVI

• What suport dock t400 (builtin DVI port 2) now?

  I find that advanced Mini Dock is a choice. but there just 1 VGA and 1 DVI,

  and a new dock support only T400s ThinkPad Mini Dock Plus Series 3 and others who have 2 DVI ports.

  and the ThinkPad Mini Dock Plus Series 3 for mobile workstations don't support T400s T410s, T500s, T510s.

  Are there any other built-in docks 2 DVI port using T400?

  Why those advanced dock do not support the T400?

  Thank you

  Hi yetchen,

  Welcome to the forum of Lenovo!

  Another option, in addition to the advanced dock + pci express videocard samira mentioned above, is an adapter USB-to-DVI and Lenovo.

  Best regards

  Frank

• Tecra M9-104 with docking station - DVI resolution

  I wonder if anyone can help. I have a Tecra M9 - 104 running Windows XP. I also have the docking station to go with it. The great thing about the docking station, it's that it can out to two screens as the port on my M5 Replicator could not do.

  I bought two identical external screens that have a native resolution of 1440 x 900. I went into the Nvidia display configuration and set up to display both (one is plugged in VGA and one DVI port). However, the display on the DVI monitor is wrong. After further investigation I woke up the menu of the monitor on the screen to see that the resolution actually be issued is 1280 X 1024, despite Nvidia screen saying 1440 x 900 has been the output. Whatever I do, I can't increase the resolution on DVI port.

  The only thing I could find on Google and these support forums is that the maximum resolution on the DVI port on a port replicator is 1280 x 1024, but it was for the M1 and M2 series. This laptop is the last series and as such, I expected that the spec had been updated at this time.

  Someone at - it ideas?

  Could be due to a limitation of the video driver on the laptop, or you can try to download a utility that requires to use a different resolution, its called Powerstrip (do not have a download link sorry).

  Be careful with it though, you can mess up your video driver