vGPU/ESXi 6.0 "hardware GPU is needed but is not available."

Similar Questions

• I'm the original purchaser of Creative Suite Premium. Still, she meets my needs but will not re - install after I upgraded my box to win 10. Win 10 is not the problem, and my Adobe customer profile indicates that the product is registered. Adobe just does

  I'm the original purchaser of Creative Suite Premium. Still, she meets my needs but will not re - install after I upgraded my box to win 10. Win 10 is not the problem, and my Adobe customer profile indicates that the product is registered. Adobe just doesn't let me activate it. Can you help me?

  If you're referring at the origin of Creative Suite (CS1) then this activation server was closed by Adobe a few years ago.

  The only way to re - install now is to download a new version without activation for CS2 (also applies to CS1 owners).

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

  Install, then enter the new, without activation serial number provided at this link (column next to the download link). Your existing serial number no longer works.

• Windows installation disc needs for a new disk hard but is not available

  Hello

  The hard drive on my PC HP badly shot - he tells me I need to check for consistency, but it cannot and will not run chkdsk on a restart and will not let me create a restore disk.

  OK, I accept that I need to buy a new hard drive but I have no CD to install Win 7. The pc has a partition called "factory secctings" but it will not create a cd of Windows or a restore cd or a Sun.

  Microsoft has said that it is not available for me because my serial number includes the letters OEM. I had a case created at HP, and a person called me and said I should get the CD of the os from Microsoft, or from the store I bought from (Staples). Staples said they have no CD for Win 7 and cannot make me a. They said get them from Microsoft or HP.

  The number of cases is 3016271460

  See that I get nothing from Microsoft, HP, or Stqples. I never got a CD with the pc because, I guess, it's there on the partition to factory settings, but with the failure of hard drive I can't use it.

  All have a suggestion?

  Your hard drive can hold the DEFECTIVE SECTORS.

  The only way to get windows 7 disc is to buy a new Amazon / similar online stores / service centres.

  You can try this:

  ""http://www.sevenforums.com/installation-setup/151566-reinstalling-windows-7-a.html#post1300819 " "

  Browse the site and do the steps as shown.

• ISCSI Boot B200 M2 need, but get 'not enough available vNIC.

  Hello

  I'm trying to implement initialization iSCSI ESXi on a B200 M2 w / M71KR-Q card above.

  I add vNIC A and B (each linked to a fabric respectively), but trying to implement a vNIC iSCSI - I get the error «not enough vNIC» available

  Looking around, it seems that M71KR-Q only can support 2 vNIC (which I also confirmed by trying to add a third, same error message as above).

  I just thought that since the overlay of iSCSI vNIC real - it works.

  However, even when adding just 1 vNIC and trying to superimpose a vNIC top iSCSI - I get the "there not enough resources overall, not enough vNIC available" error message.

  Does anyone know if it is even possible to initializing iSCSI on B200-M2 w / M71KR-Q on?

  Thanks in advance!

  Petar

  Please refer to this document in the section documents iSCSI boot https://supportforums.cisco.com/docs/DOC-18756 it is very detailed, I tell myself.

  initializing iSCSI is only supported on CiscoVIC and Broadcom mezz cards. It is not supported on the M71KR-Q Qlogic Gen - 1 mezz.

  Dave

• I need, but do not know how to go to the FWD & BWD browse screens like these arrows are missing from my tab

  in IE, I could see left and right arrows for Backward and Forward through the pages. I used to make them, but they disappeared after I did something. A screenshot will be following when I figure out how to paste the shpt on my area of Question (later)

  Hello

  Sometimes, bars of buttons and tools or are missing because they are hidden, you just bring it to the top. Visit this link to know how to report them: Customize Firefox commands, buttons, and toolbars. You can learn tips and tricks at the same time.

• Mercury Playback Engine GPU is not available

  I have read through the forum messages and have not found a solution, so I apologize if there is only a solution posted elsewhere.

  I have an iMac 27 "(fin 2012) with NVIDIA GeForce GTX 680MX running Mac OS graphics card 10.8.5."

  I use Adobe first Pro CS6.0.3, and when I upgraded my OS to 10.9 Maverick, I started to experience several problems, including:

  1. The dreaded spinning beachball and "first meets not.»
  2. "This project has been modified used with Mercury Playback Engine GPU Acceleration (CUDA) which is not available on your system. Mercury Playback Engine Software only will be used.
  3. Video files - I think they were all. MOV - became "crushed" to the top of the program screen (film picked up only about 1/3 of the window the program monitor).

  After a long conversation with the Support from Adobe, it stated that the update to 10.9 Maverick was the problem, then i:

  1. Updated for first 6.0.5 but who has not fixed any issues.
  2. Logged in as 'Root', who worked for a while but I got 3 'first encountered problem and must close.'
  3. Remove preferences, repaired permissions, database troubleshooting practices, etc., but problems persist.
     

  No help.

  Finally I restored my computer from a Time Machine backup to a day before the OS 10.9 update and this seemed to resolve all issues. So I was for Mac 10.8.5 and first 6.0.3.

  But the. MOV-compressed-in-the-program-monitor problem began to surface again (see photo below).

  

  So I updated for first to 6.0.5 (but not my OS - it is still 10.8.5), and the "Mercury playback engine" error is returned.

  

  And the. MOV files are always compressed in the program monitor. I have a project that I finished in 6.0.3 but is now messed up in 6.0.5.

  Help please. Is the only solution without downgrading to first 6.0.3 and if so, should I do a clean install of the program of the DVD?

  Thank you

  RW Harris, Director of training

  Express oil change & tire engineers

  Birmingham, AL

  NVidia Windows Hack http://forums.adobe.com/thread/629557 - which is a simple entry in a file 'supported cards' - and Mac http://www.vidmuze.com/how-to-enable-gpu-cuda-in-adobe-cs6-for-mac/

• I need to re - install windows vista but can not find my disk

  Gave up my old hard drive to the laptop and I need Windows vista but can not find my disc can I download it for free if so microsoft where any help would be great

  Thank you very much, Nik

  Hello

  There is no Windows Vista downloads available from Microsoft.

  Contact the manufacturer of your laptop and ask them to send a set of recovery disks.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  See you soon

• Reinstall vist on my pc says I need a disk to reinstall on the pc, but got not one I can do

  lost all data on my pc it says now I need a disk to reinstall on the pc but does not got one I can do

  Hello

  Here are the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  I am at a loss.  I've set up a root certification authority to sign all servers in my workspace of Horizon, SAML is in the Green and after a lot of reading when troubleshooting also synchronized on all my ESXi hosts and guests.

  Basically, what I did is the following:

  Set up the connection to the Server VMware View Horizon 5.2 - created different pools and can connect via the customer different platform. (a few times to eliminate any possible configuration errors along the way)

  Configuration of VMware View Horizon Workspace 1.0 (a few times now) with self-signed and CA signed certs.  My workspace appears fine, the synchronization of files, apps work, and view pools appear.  When I try to launch your desktop from inside the Horizon workspace I get this error:

  The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  Now I think that I followed it down to something to do with SAML connection - which, to my understanding, archery chips between workspace and view.  On the login server, I see it in the Windows event log:

  BROKER_USER_AUTHFAILED_SAML_ACCESS_REQUIRED

  SAML access required but not tempted by customer

  Attributes:

  Source = com. VMware.VDI.Broker.filters.SamlAuthFilter

  Time = MON may 20 16:06:41 MDT 2013

  Gravity = AUDIT_FAIL

  Node = ViewConnection.access360.ca

  Module = broker

  Recognized = true

  Something is not crossing to allow me to access my office view since the workspace of Horizon.  If I remove the requirement of SAML on the login server see, when I try to connect to a desktop computer from the view connection server I get a promotion for and can I get my IDs & field and have full access with reviews, as well as blast HTML - just cannot get there with Horizon Workspace.  There must be something that I am missing with SAML...

  As I said, I'm at a loss here on what does not work between the Horizon workspace and the connection of SAML for display to connect to the server.  There is no server security, server transfer, and firewalls is all off, so I don't think it's a network problem.  Simple as possible.  The Windows Journal event displays the login displays server error is: access required but not attempted by client SAML.  I have all my servers synchronized after a few seconds - so I don't think that documented the TIME Horizon workspace synchronization time sensitivity is responsible here.  I am Pack overnight, but will do exactly the same thing with a client of tomorrow - hopefully without the same result!

  Any ideas?

  A

  So I re-deployed the VAPP (again!) very attentive as I went.  As usual, the initial database installation failed because I entered my domain FULL of the gateway name, so it does not match.  After useful messages already there for this (Workspace install fails with error creating the user admin) I used the wizardssl.hzn of connfigurator - going to recreate a rootca to the environment based on my FULL domain instead of the bridge - going and then let it grow all for the other vApps.  I then connected to each and pulled down my private rootca and ran c_rehash, etc. (another useful message!- adding MS signed Certs to Horizon Workspace & laquo;) Carlos & #039; Corner) I actually use my background to UNIX and openssl to be my own private CA and sign all of my certificates.  I created the SAN cert and added to the SSL configuration on the Configurator - going and connector - going.  Oddly enough, both of these server do not appear to be accepting SAN cert that includes their ENTIRE domain, but that's for another day... My Horizon Workspace FQDN does show as being approved by installed RootCA private (which does not have other DNS names for the service - going, the Configurator - goes, the data - will and the connector - will, but as I have already said--a battle for another day) so it's a good thing.  I joined my workspace to my domain name - well!  Activated would be pools seen in the Configurator - goes - sync - good.  CRT for the my display login server has accepted and implemented the SAML trust.  Still good.  Sync in my opinion users group who already had a couple of linked clone pools allowed to do.  Good.  Connected to the FQDN of my workspace and clicked on computers - seen my 3 pools.  Clicked on one and after a few seconds, launched in a new window of the explosion.  Success!  I disconnected and connected on a different machine, and something that I saw before, but doesn't have a lot of attention to was the connector - will put 'use windows authentication', I couldn't understand why every time I sailed on my Horizon workspace a no vmware window opens asking access my FQDN:443 with a user and pass.  It is this setting - duh.  I'm not sure yet that gives me, so it's off for now.

  Thanks for all the input: it's good to know that there are others with some of the same questions.  It's still v1.0, it is related to some of these pitfalls.  It is capricious with derived from same time less than 10 seconds seems to have a negative impact.  Had to ensure my ESXi servers were strong (never worried a lot in the past with MS AD being quite tolerant with small derivatives) I tired my vApps affecting a NTP, but they seemed like being left to the default of synchronization to the ESXi host.  See how than pans.  CERT is somewhat capricious depending on your deployment.  Of course the connector - will and the Configurator - must be signed by a CA that they are internal, but always be nice to then have signed internal...

  Now, I'm on ThinApps for desktops as well as the web interface integration.

  I bumped my head against the wall with my first configuration of Citrix XA and XD (before having VDI in a box!) and it was the best way to learn.

  I don't know that I grave along that I finished my PoC, but I'm very happy with today's results.  I still plan on the comparison of my logs successful with the logs I have pulled my former deployment TIME and see what it was that it was broken.  I think it was that wanted me a PTR record to my domain FULL DNS MS. name  I think I just had the direct search for the original bridge - will and FULL, but only a setback for the gateway domain - name.  Would explain why I was never able to connect to the gateway to access your desktop.  Oops.

  A

• service on this host of hardware control is not answered or is not available

  Pessoal,

  tenho um servidor ESXi 5.0 e reiniciar o host wanted.

  ELE renew funcionandonormalmente, aba of na very esta aparecendo a mensagem, condition of the equipment:

  "Service on this host of hardware control is not answered or not available.

  O program resolution posso fazer para este problema?

  Bem Vindo,

  Chegou a testar clicando no reset e sensor to date?

  TestOU o Serviço reiniciar also host VMware?

  Para reiniciar o Serviço host vmawre host via ssh acesse o e digite services.sh reboot

  ABCs

• New Mac Pro, with dual AMD D500, GPU is not available?

  Is there something special I need to do to get the GPU to work in After Effects? Screen Information GPU said currently I Open GL, but the GPU is not available in the menu dropdown. In particular, I try to get the 3-d element performance, and I think that actually went slower than on my Mac Pro 2011.

  That's what chart using professionals are moving forward... Please tell me Adobe did not drop the ball on this one. He came out for almost a year!

  Element runs its own back-end stuff, all parameter of GPU in After Effects should not have an effect on how it works. Something is preparing for what is element.

  Like Rick, all uses of the AE the GPU for accelerates the ray-traced rendering engine, so I wouldn't worry at all. The inclusion of Cinema 4 d with your After Effects installation has made obsolete the raytraced render engine. In addition, speed up the rendering raytraced required engine cards NVIDIA, AMD not. This is why you cannot set to use your GPU; It's not NVIDIA. But, again, as I said, the ray-traced rendering engine is obsolete, if it's not quite relevant.

• Help - what is and what is not available in free version of ESXi 3.5 U4?  VIMA?  VI Toolkit?

  Hello

  I'll try to find a (web page perhaps) summary of what is and especially what is NOT available in free version of ESXi 3.5 Embedded U4.

  Like many people I guess, I spent hours looking for a way to perform certain operations on virtual disks, to see that these operations have been banned in the free version of ESXi 3.5 U4.  It is reasonable, after all, if someone gives you a horse, don't look in his mouth!  But while I'm happy to be an ESXi 'amateur' to a certain extent, I'm starting to feel like a pirate, and I'm doing this a bit more productive experience.  Here's what I found so far:

  -Some of the most useful features in VMware Tools (such as 'narrowing of the virtual disks') seem to have no useful effect in ESXi 3.5 U4 Embedded free version

  -L' operation-e vmkfstools.pl RCLI to rename the virtual disk (moving) and the i - operation to clone (copy / import / export) a virtual disk seem to be disabled (due to lack of return. RestrictedVersion.summary)

  -vim - cmd does not provide what be good beyond what you can do in VI Client

  In particular, can someone tell me if it is interesting to study the following, that is I'll be able to do anything discs at all useful to the virtual with them in ESXi 3.5 U4 Embedded free version:

  -VIMA

  -VI Toolkit (for Windows)

  Thanks for any help/pointers.

  Take a look at this article: http://vmetc.com/2009/03/31/esxi-u4-ends-free-version-read-and-write-access-from-the-rcli/, it should provide general information on the ESXi set and the problem of read-only.

  As ESXi never was intended to provide full access to the VI API, you get what you pay for and in this case, you use the free version so that you can accomplish all of these tasks with the VI Client, if you want more, you'll have to pay for it.

  So first off, vim-cmd is only available with the unsuppoted SSH console and you can probably do most of the basic tasks through some scripted as a shell script automation, also in the console Busybox unsupported, you have full access to the very familiar vmkfstools. Now, you mention vmkfstools.pl is the remote version of the tool, because it is not available by default with ESXi (as the console does not support is not supported by VMware). To manage and configure your remote host ESX and ESXi, vCLI was created that replicates most of the popular esxcfg-* commands that use the API of VI

  This VI API is not free, you have full read access but if you want to set up/perform all operations that aren't will not be played, then you will need to have a license appropriate and which is at the Foundation or higher. The API is exposed as WSDL/SOAP and there are various scripts/languages with links that hang in the VI API to provide a level of abstractions for programmers, administrators, some of these languages include Microsoft Powershell, Perl, c#, Java, etc.

  PowerCLI (officially VI Toolkit Windows) is such a link that uses the VI API, i.e. to use it you will need to have the appropriate permit to change the configuration of other you will have only read access, it's similar to Perl called vSphere SDK for Perl bindings. So, if you're going to explore other routes, you will always encounter the same fundamental question.

  Okay, vMA (officially VIMA) is just a VAPP VMware RHEL that provides administrators a way to centrally manage / to distance your servers ESX/ESXi and vCenter. It comes by default with the vSphere THAT SDK Perl and a few other utilities to help manage/configure your systems and once again they depend on the VI API which access set based on the licenses that you have on your hosts.

  So all the options are options, but you need to know if you are going to get a license, because without the most basic, you will not be able to use one of these toolkits. Note that the license NOT only does full read/write access to the API but other features depending on the license you buy.

  There are other tools that provides VMware which, for now, temporarily has functions of management for virtual machines ONLY, this may change in the near future but take a look at this thread for more information post: is not happy with lockdown 3.5u4 VI API/RCLI ESXi? Worry not, VMware VIX to the rescue... for now =)

  I hope that this clears up everything.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• When you try to restore backup on new iTunes iPhone 6 says new version needed but my Mac Pro is up to date

  TTrying to transfer the iPhones but when I plug my 6 in iTunes it says a newer version needed but my iTunes is up to date

  What version of OS is your MAC?

  What version is your iTunes?

• I opened Firefox accidentally cancel such a rush, but it still opened but did not restore my last session (I needed) and cannot find how to restore - help!

  I opened Firefox accidentally then cancel pressed, thinking that it does not open Firefox if I did it, but it opens it in any case, but does not restore my last session (I needed) and now I can't find how to restore - help!

  This has happened

  Just once or twice

  == I accidentally opened Firefox and clicked on cancel thinking that it does not open Firefox if I did.

  You will find this bookmarking a page (by clicking the star next to the address, or to go in bookmarks > bookmark this page is precisely what we must remember the pages.) This is a feature common in web browsers, and it's very very useful in many situations, including the memory of the location of the pages that you want to see later, allowing access to the pages that you use frequently and other things too.

  If you want to know about session restore, there is a helpful support article here which I think also has information on version 3.0. However, I invite you, once more, update, since older versions (including 3.0) are is more sustained and have known security flaws. In addition, you will not lose any no matter what functionality at all (unless you use modules that are no longer usable by the newer versions, in which case you must contact the authors of Add-ons for support and ask them to update their software), is free and very easy to do.

  If you need other help at all, whatever it is, tips, troubleshooting, step-by-step procedures, feel free to ask here.

• How much space I need for ios9 (not enough free 5 GB)

  How much space I need for ios9 (not enough free 5 GB)

  You have a computer and you sync via iTunes?

  If you update via iTunes you need not as much free space on your iPad because the software spreads itself by using your computer, not the ipad memory