VI Client shows 95% starting a virtual machine but the virtual machine is already up

Similar Questions

• LaserJet P1102: Installed drivers, showing that this page is printing but the printer usually take measures

  Hello

  my printer of seams run very well on old runing computer dell laptop win 7. Now I switched to OSX Yosemite, MacBook Air and I have problems with printing. I have instaled nessesery pilots, even been updated for them, but I can't find a way to print something.

  When I turn on my printer, conect to the laptop via the usb port, press to print the page, I can see that the document is on the queue and also the State of ptinting. Driver is actually showing me the wrong results, as printer prints pages and how much left, but the printer will take no action.

  I don't know what can be the problem, because my printer works. It may be a driver, but I think it's an official for this printer so I'm stuck.

  Best regards

  Milan Radojevic

  Hey @iznogud92,

  Welcome to the Forum from HP Support.

  I see that you are unable to print from the Mac using your HP LaserJet Pro P1102 printer.  I want to help you with this.  I have some suggestions that might help.

  Try the following steps:

  1. Uninstall the printer - click here for instructions.
  2. Fix permissions of the disc on your Mac - click here for instructions.
  3. Once you have finished running the utility above, restart your computer.
  4. Finally, click here to reinstall your printer.

  You are able to print from Mac now?  If not,

  You can add the printer manually and use a generic driver built-in.  Here's how:

  • Click on the black Apple
  • Click on System Preferences
  • Click Print & Fax, print & Scan or Printers & Scanners

  

  • Click the Plus (+)
  • If the Mac detects the connection of your printer (either via usb or wireless) click on 'Use' as shown below
  • Select the generic driver printer PCL

  

  Note that this installation method is not guaranteed, but it could serve as a basic solution.  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• When you try to start Firefox I get a message saying "a copy of Firefox is already open. Only one copy of Firefox can be open at a time. "I started a new profile, but the Profile Manager always tells me that by default it is still in use.

  When you try to start Firefox, even once, I got a message saying "close Firefox. A copy of Firefox is already open. Only one copy of Firefox can be open at a time. "This issue is addressed in Mozillazine but nothing I've tried there seems to work. I started a new profile in the profile manager that gets at least upwards and the functioning, but strangely enough the Manager also told me the old (default) profile is still underway, although I can't find a way to close it. Also, I can't find the default profile in my Profile Manager. can anyone help?

  This has happened

  Just once or twice

  == I thought that I had left Firefox and he was new.

  I get the same problem from time to time. It is not a solution but I go into Task Manager (select by right clicking on an empty area of the start bar) and under the research process and, invariably, there is a 'hidden' version to use the FF. I selects & close via Task Manager and then am able to restart FF.

• After running chkdsk because I had blue screen whenever I started, now it works but the taskbar and start button are gone! I tried to run explorer.exe but who did nothing!

  I have an emachines T6534 and whenever I start my computer, I would get an error stop 0 x 00000024. I ran chkdsk on my other computer with the hard drive and it seemed to fix the Blue error screen. But now, whenever I log in, it takes 15 minutes to log on and I can't access the files. The "Start" button does not appear or is the taskbar. I can run the Task Manager, but that's all. I have very important files on the hard drive and cannot afford to lose. I can't even open internet explore from the Task Manager. When I try to run the system restore, it says 'system restore is unable to protect your computer.

  Please help me! Thank you very much.

  I have an emachines T6534 and whenever I start my computer, I would get an error stop 0 x 00000024. I ran chkdsk on my other computer with the hard drive and it seemed to fix the Blue error screen. But now, whenever I log in, it takes 15 minutes to log on and I can't access the files. The "Start" button does not appear or is the taskbar. I can run the Task Manager, but that's all. I have very important files on the hard drive and cannot afford to lose. I can't even open internet explore from the Task Manager. When I try to run the system restore, it says 'system restore is unable to protect your computer.

  Please help me! Thank you very much.

  The Stop 0 x 24 message indicates that a problem has occurred in Ntfs.sys, the driver file that allows the system to read and write to NTFS file system drives. A message similar to Stop 0 x 23, exists for the file systems (FAT16 or FAT32) file allocation table to.

  Possible resolutions:

  1. hardware malfunctioning SCSI and Advanced Technology Attachment (ATA) or drivers can also adversely affect the ability of the system to read and write to disk, causing errors. If you use SCSI hard disks, check the wiring problems and ending between the SCSI controller and the disks. Periodically check Event Viewer for error messages that are associated with SCSI or FASTFAT in the journal system or Autochk in the application log.

  2. check that the tools that allows you to continuously monitor your system, such as virus scanners, programs of backup or disk defragmenters are compatible with Windows XP. Some drives and cards are issued with diagnostic software that you can use to run hardware tests.

• I have my key to produce 'windows 7 starter OA SEA NCPS' but the cd was lost

  Please help me to get a link to download the tqvm

  See the following topics:

  For Windows 7 Starter, please follow the instructions here.

• SVG showing is not on my screen, but the text it is.

  Hello

  Determined to get this SVG of a logo to display. Don't know what the problem is that I'm not on the screen. In Illustrator, I used "recorded under" and chose .svg. Should I have used 'export' instead? (it's an idea)

  < class header = "header image" >

  < div class = "headline" >

  < div class = "container" >

  "" < img src = "... /IMG/This-logo.svg" alt = "a description on the display" height = "400" width = "400" >

  < / div >

  < / div >

  < / header >

  It is one element of another in the same container, in the background. This is displayed.

  {} .header-image

  display: block;

  Width: 100%;

  text-align: center;

  background: url('.. / img/bg-conception-element.jpg') roll no repeat Center Center;

  -webkit-background-size: cover;

  -moz-background-size: cover;

  background-size: cover;

  -o-background-size: cover;

  }

  Thank you.

  Oops. It appears when I did the /img/theSVGfile.svg path

  I'm a little confused but why require some pictures... /IMG/photo.jpg - I thought it was the surefire way when they are in a pictures folder.

  I found myself having to re - the scale of the SVG at several stops a lot of questions from the media during the test on a desktop browser.

  - But it is very crisp and I am happy with it, so I guess it was worth the extra effort.

• ESXi 5.1 cannot start a virtual machine with Admission check has no memory error

  I see that there were a number of people who have this error and adjusting the reserve memory for the VIM under resources system has solved this problem, but not for me. My booking in the VIM process setting is '0'. Vital signs:

  Reference Dell T110 II server

  4 GB OF RAM

  Intel Xeon processor E31220 @ 3.10 GHz

  4 cores of the processor

  Hard drive 500 GB

  ESXi version 5.1

  A Linux VM with 4 GB RAM allocation, 2 cores of CPU and 45 GB of storage.

  Error I get on a attempted to start:

  Has no power on the virtual machine.

  Could not power on VM: check for Admission has no resource memory see the management of VMware ESX Resource Guide for management information settings.

  Group vm.4757: invalid memory for VM vmm0:Mitel_Applications_Suite allocation settings. (min: 524288, max:-1, minLimit:-1 actions:-4, units: pages)

  Group vm.4757: can not admint VM: admission of memory has failed. booking request: 536579 pages

  I changed the memory to the VM all the way up to 1 GB, no change.

  I played a bit with the allocation of memory VIM, no change.

  A fact interesting is that the Allocation of resources for the tab host watch memory @ 1747MB capacity, capacity reserved @ 0MB and available @ 1747MB capacity, but I have 4 GB of RAM and the vSphere Client shows it under the Configuration tab.

  Take a look at this blog post: http://www.vmwarearena.com/2012/07/failed-to-power-on-vm-admission-check.html

• ESX 4.0 - cannot start a virtual machine?

  I have recently install ESX 4.0 evalution in mode. We stopped for the licenses of our distributor who will take 3 to 4 days.

  ESX 4 installs successfully on DL 360 G5 and I use 30 MSA with 7 discs (1.6 to total) as a storage device. It detects the local drives and 1.6 to datastore perfectly. But when I create a simple virtual machine and start reading the BONES of CD ROM it does not start. Is it because I use eval mode. I think ESX 4 is fully functional and active for 60 days. When I start the virtual computer it concludes with the message "Operating System not found" and not even boot from the CD ROM After two or three configurations of chaning of VM, I'm still not able to understand. Can someone tell me where I am doing wrong. In ESX 3.5, I ran the virtual machine correctly but in ESX 4, I'm not sure. This is a new server and ESX 4.0 is also new facility. I also appreciate if someone tells me a guide that shows step by step how to create a virtual ESX simple machine. I have not yet install VC 4 as I have not yet received the licenses.

  Thanks in advance

  Please check the following things

  1, "to connect to the power on ' should be checked for the CDROM in editing parameters

  2, Goto VM BIOS and check if the CDROM is the first boot device.

  3, check the CD-ROM drive to start a physical machine

  4, check if you connect the CD-ROM drive to a remote location.

• How to start a virtual machine without vmx file

  Hello, I have a virtual machine that I want to start up using 10.0.0 on Ubuntu 14.04 32-bit workstation but I don't have multiple vmdk files and a file on me vmxf and apparently, that's all that is in the software. How do I run something like that?

  Hello
  You cannot start a virtual machine without a vmx file.
  If you do not have a vmx file - fly a.
  For example this one:
  -----------------------------------

  . Encoding = "windows-1252".

  config.version = '8 '.

  virtualHW.version = '8 '.

  scsi0. Present = 'TRUE '.

  scsi0.virtualDev = "free".

  memsize = "2048".

  scsi0:0. Present = 'false '.

  scsi0:0. FileName = "set-path-to-bootdisk-and-then-set-.present-to-true-to-activate".

  ethernet0. Present = 'TRUE '.

  ethernet0.virtualDev = "e1000".

  displayName = "minimal-vm.

  guestOS = "windows7-64.

  virtualHW.productCompatibility = "hosted".

  ------------------------------------

  That cuts into a file and store it as a *.vmx.
  Then launch the new VM with
  VMware /path-to-vmx/name.vmx or
  vmplayer /path-to-vmx/name.vmx
  Other users may also recommend to simply launch the user interface and follow the file > New menu...
  and then order the new virtual machine to the card by selecting your existing virtual disks.

• What HA refusing to try to start a virtual machine?

  I'm trying just to clear on how this process works. If HA is enabled, there is a failure of the host, and he's trying to restart the virtual machines on one or several other hosts, when the host will refuse to restart (failover) a virtual machine? Assume that there is no reservation other than the default 37 MHz CPU and some booking fees calculated generals for RAM (these are the default values, right?). A host would continue to attempt to restart the virtual machines as long as there are at least 37 Mhz and a few hundred MB of RAM available for the moment he is trying to restart? And if so, there are algorithms maintains the host master to decide where to start these VMs? I just think that she should try to startups VM alternately between the available hosts and wait a little bit to make sure that there are still some available resources before you start the following, or something like that.

  Also, if there is fragmentation of resources (for example, 8% of availability on each of the 15 hosts), but HA needs to start a virtual machine that requires 15% of host resources (I realize that there is a reserve in order to decide this question of the requirement, even), would automatically make migration of VMS to other hosts (if the DRS is also enabled) or he'd just sorry cannot start this virtual machine, even if the group as a whole has space for him.  [in this case, must not make large reserves because without a reservation, the virtual machine would start upward and like CPU or memory has increased its use would cause some DRS force other virtual machines out of the host, and perhaps that would work.]

  vSphere 5.1 (vCenter and ESXi)

  The master knows where virtual machines are running and try to balance where virtual machines are started. Reservations and overhead costs are the only things taken into account from a point of view of its use (not the actual resources consumed on a host) because HA does what VMs restarted (and if they have reserves prompting these resources, they need to have to start).

  If the DRS is turned on and available, HA will work with DRS to move workloads so that the largest VMs can begin. If you have virtual machines more the thing to think about is what admission control policy you use. It may be wise to use the location function if all your virtual machines are large and close to the same size, or dedicated host of failover so you won't have to deal with shuffling DRS of workloads. Everything depends on your environment and your needs.

  Does that answer your questions?

• start a virtual machine at startup of windows 7 via issue of short boot cut

  Hi Experts

  I am running Win7 with 10 Workstation. I'm trying to start a VM at startup as its suppose to host my server cloud. Then I don't have to manually start the virtual machine each time.

  I put a shortcut to vmware workstation in the startup folder in the start menu. And followed the guide of the user of the WS10, excerpts below:

  Incorporate the workstation Startup Options in a Windows shortcut

  1 right click on the shortcut of the workstation and select Properties.

  2 in the target text box, add all the options to use after the vmware.exe and place the entire order

  quoted string.

  For example:

  «C:\Program VMware Workstation\vmware.exe x»

  C:\Documents and utilisateur\Mes Documents\My Me\Windows Machines\Windows Settings\nom virtual

  Me.vmx ".

  So I did the same thing, but when I put in the path to my vmx file I get an error how the target path is invalid. That's what I put:

  "C:\Program Files (x 86) \VMware\VMware Workstation\vmware.exe x - D:\My Documents\Virtual Machines\OwnCloud_2nd\OwnCloud_2nd.vmx.

  But when I run it as a command such as file below, it works:

  CD "C:\Program Files (x 86) \VMware\VMware Workstation\.

  VMware.exe - x "D:\My Documents\Virtual Machines\OwnCloud_2nd\OwnCloud_2nd.vmx"

  output

  can someone point out to me what am I doing wrong?

  Form the command as follows: "C:\Program Files (x 86) \VMware\VMware"-x "D:\My Documents\Virtual Machines\OwnCloud_2nd\OwnCloud_2nd.vmx.

  Or you can configure the virtual machine to run as a Virtual Machine shared.  Check out the VMware Workstation Documentation and or the help file.

• Stop/start multiple virtual machines with names created automatically

  Hi all

  in my test environment, I want to stop or start multiple virtual machines via the script.

  Their name is always like this:

  'vm-100-qa', 'vm-101-qa","vm-100-qa","vm-102-qa '...

  Now I would like to just stop every VM 'vm-140-QA' to 'vm-160-qa.

  I created a table "$a = 140.160", but I don't know how to implement this in a script 'Shutdown-VMGuest-comments '.... »

  Sorry for this stupid question. I am a beginner absolute powershell.

  Thank you very much in advance,

  Petrie

  You can do something like this

  140..160 | %{   Shutdown-VMGuest -VM "vm-$_-qa"}
  

• [Q] cannot start a virtual machine - internal error [SOLVED]

  Hallo,

  I installed Workstation 8 and cannot start a virtual machine - or those created those previous or new. Turn the machine gives me an "internal error."

  My characteristics: Win 7 64-bit (SP1), Core i7 2600 K with 8 GB of Ram

  The newspaper of vmware:

  011 10 - 03 T 19: 22:38.013 + 02:00 | VMX | I120: Log for VMware Workstation pid = 3424 version 8.0.0 = Build = build-471780 option = output
  2011-10 - 03T 19: 22:38.013 + 02:00 | VMX | I120: The process is 64-bit.
  2011-10 - 03T 19: 22:38.013 + 02:00 | VMX | I120: Host = encoding windows-1252 = windows-1252 codepage
  2011-10 - 03T 19: 22:38.013 + 02:00 | VMX | I120: Host is Windows 7 Home Premium, 64-bit Service Pack 1 (Build 7601)
  2011-10 - 03T 19: 22:37.713 + 02:00 | VMX | I120: VTHREAD initialize main thread id 0 "vmx" host 6336
  2011-10 - 03T 19: 22:37.738 + 02:00 | VMX | I120: Settings REGIONAL windows-1252-> user NULL = System = c07 c07
  2011-10 - 03T 19: 22:37.738 + 02:00 | VMX | I120: Msg_SetLocaleEx: HostLocale = windows-1252 UserLocale = NULL
  2011-10 - 03T 19: 22:37.743 + 02:00 | VMX | I120: FILE: FileLockDynaLink: other process validation tools are: available
  2011-10 - 03T 19: 22:38.014 + 02:00 | VMX | I120: Hostname = KOENIG
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP = d fe80::41: e6a3:5dd2:fa9f % 11
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP = fe80::1cf:3682:36e8:4ccb % 17
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP = fe80::1 d 80: 2f6e:979 c: b57d 18%
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP 192.168.1.4 =
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP = 192.168.30.1
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP = 192.168.158.1
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: HOSTINFO 1074415970 @ 3331240Hz-> 0 Hz 1000000000
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: HOSTINFO ((x * 2518163806) > > 23) + 322527338056
  2011-10 - 03T 19: 22:38.037 + 02:00 | VMX | I120: System uptime 321912074 us
  2011-10 - 03T 19: 22:38.037 + 02:00 | VMX | I120: command line: "C:\Program Files (x 86) \VMware\VMware" "-s" 'vmx.stdio.keep = TRUE' "-#" "product = 1; name = VMware Workstation; version 8.0.0 =; BuildNumber = 471780; licensename = VMware Workstation; licenseversion = + 8.0; ""-@ ""pipe=\\.\pipe\vmxf3ce37cf9b6f9c3e;" "D:\VM\Windows 7 x64\Windows 7 x64.vmx".
  2011-10 - 03T 19: 22:38.037 + 02:00 | VMX | I120: Msg_SetLocaleEx: HostLocale = windows-1252 UserLocale = NULL
  2011-10 - 03T 19: 22:38.056 + 02:00 | VMX | "I120: UI connection on pipes '\\.\pipe\vmxf3ce37cf9b6f9c3e' user (null)".
  2011-10 - 03T 19: 22:38.057 + 02:00 | VMX | I120: VMXVmdb: local connection timeout: 60000 ms.
  2011-10 - 03T 19: 22:38.104 + 02:00 | VMX | I120: VmdbAddConnection: cnxPath = / db/connection / #1 /, cnxIx = 1
  2011-10 - 03T 19: 22:38.105 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:483]: VMAutomation: initialize VMAutomation.
  2011-10 - 03T 19: 22:38.105 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:780]: VMAutomationOpenListenerSocket() to listen
  2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:4067]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0
  2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: Past vmx/execState/val of poweredOff
  2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:4067]: VMAutomation_ReportPowerOpFinished: VarEtat = 1, newAppState = 1873, success = 1 additionalError = 0
  2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:4067]: VMAutomation_ReportPowerOpFinished: VarEtat = 2, newAppState = 1877, success = 1 additionalError = 0
  2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:4067]: VMAutomation_ReportPowerOpFinished: VarEtat = 3, newAppState = 1881, success = 1 additionalError = 0
  2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: VMMon_GetkHzEstimate: calculated 3411189 kHz
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: VMMon_RememberkHzEstimate: calculated 3411189 kHz
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: TSC kHz estimates: Memoirs of vmmon 3411189, 3411189, osReported 3401000. With the help of 3411189 kHz.
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU 0 # TSC = 1100186590922
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # 1 TSC = 1100186590888
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: # 2 CPU TSC = 1100186590603
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # 3 TSC = 1100186590637
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # 4 TSC = 1100186590948
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # TSC 5 = 1100186590906
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # 6 TSC = 1100186590898
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # 7 TSC = 1100186590836
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: TSC of measured first delta 345
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: TSC 387 min Delta
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: PTSC: RefClockToPTSC 0 3331240 Hz-> 0 to 3411189000 Hz
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: PTSC: RefClockToPTSC ((x * 4294966339) > > 22) +-1100565306901
  2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: PTSC: tscOffset-1100187618517
  2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: PTSC: using TSC
  2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: PTSC: material TSCs are synchronized.
  2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: PTSC: PTSC current = 289960
  2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: Module CPUID initialization failed.
  2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:869]: VMAutomation_LateShutdown()
  2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:819]: VMAutomationCloseListenerSocket. Close the socket of the receiver.
  2011-10 - 03T 19: 22:38.125 + 02:00 | VMX | I120: VMX VMDB Flushing connections
  2011-10 - 03T 19: 22:38.125 + 02:00 | VMX | "I120: VmdbDbRemoveCnx: remove Cnx Db for ' / db/connection / #1 /"
  2011-10 - 03T 19: 22:38.125 + 02:00 | VMX | I120: VmdbCnxDisconnect: Disconnect: pipe closed for pub cnx ' / db/connection / #1 /' (0)
  2011-10 - 03T 19: 22:38.129 + 02:00 | VMX | W110: Failed to initialize the virtual machine.

  I scored an error... I tried to reinstall, clean... nothing helps.

  Curiously, I can use the Player app to run all VM´s without problem...

  All solutions?

  Thanks in advance

  Marcus4Aspern

  Is - the name change "vmware.exe" with something else?

• Start a virtual machine in offline mode? (i.e. If it is not on the network)

  I want to be able to start a virtual machine and modify network settings before I allow it to connect to the network.  The physical equivalent of this would be to pull the cable network on a server before starting, then the changes after startup and then plug the cable back in.

  Is there some equivalent to this in VMWare?  Can someone suggest a procedure for this?

  Go to the virtual machine settings and uncheck the box "connect to power on" for the network card.

• Start all virtual machines

  Hello

  A couple of weeks, I installed Vmware server 2.0 on Ubuntu 8.04 server, I must say that it works perfectly, I encounter any problem yet. At this point, I am trying to automate some processes such as backup and start and stop virtual machines.

  The thing is for the moment we have 4 virtual machines and im starting those manually now (1 by 1) using the vmrun command, now my question is, is anyway to start all virtual machines at the same time? I tried many things and I can't make it work, some help would be really appreciated.

  Thanks in advance and best wishes,

  Stone.

  OK - enter you requirement exactly, in my defense.

  I posted earlier, a shell script to the server 2.0 beta forum, which found all the *.vmx scripts, and then made a "suspend" their needs so very easy to change it to do a 'departure' instead.

  See the 'vmware - suspend' script in this post:

  http://communities.VMware.com/message/1036371

  Post edited by: guyrleech