Vibrant blue flashing SB2

Similar Questions

• Light of HDD Ext - StorE Alu2 - blue flashing / blinking constantly

  Hello

  I have a store alu2 px1640m - 1 hl 0

  Suddenly, it works tonight. I can't feel/hear the disc and the blue light on the front flashes at 2 Hz about.

  Any ideas greatly appreciated.

  Jim

  Some news on the issue described? Always the same problem?

• Blue flashing pixel on my M40-107

  Following problem. Come back just my Satellite and they replaced the motherboard. However the problem I've had from day one has not disappeared.
  Whenever the laptop feels like it there is a blue pixel flashing somewhere in the middle of the screen. If you move the screen a little from before backward and the other direction, pixel went or it wil come back to. If you can see, it will be blue.
  Is this really a dead pixel? But why it sometimes works? Is this just a bad cable?

  :( I'm getting really depressed this laptop

  [Edited by: admin]

  Hello

  Really, I can understand that you are concerned about this. I guess that this pixel is actually dead. I also found an article on this subject. If you want you can check under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?service=EU&from=faq_selection&CFID=Display + - + Graphics & FID = TRO000000265d.

  It is possible that this pixel will change depending on the background color.

  Good luck!

• Toshiba PX1396U - 3 T 01 Store E stopped recently & blue flashing

  Toshiba PX1396U - 3T 01 stopped working recently

  Good evening

  I have a drive external hard (model above) who has recently stopped working. When trying to connect the hard drive of the computer hard drive flashes blue and does not allow access to content in files.

  Any ideas what this could be? How should I do? I need urgent access to the files on it!

  Thank you

  Please follow the first thread you created in this forum:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=252880
  This allows to follow the thread.

• Satellite M100-164, dosen't start, blue flashing light

  Yesterday, after returning home from work, I played my favorite game World of warcraft. I was playing on the bed and I was too lazy to go and put it to load, so I went with the game running on the computer, I wake up the next day and of course the battery is exhausted, so I'll and load and I m in shock, he doesn t turn on and keeps a blue light on the first flashing LED , where it shows the if it is supported or not.

  So whenever I press the power button, of course it will not connect. I tried to turn on without the battery, same problem and always blue light. Please, I would like an answer to this question, because I'm a pretty active raider and I urgently need my laptop game (this is displayed through my laptop to friends).

  Thanks in advance, Merlah

  HM, doesn't sound good. Please, try the following:

  Remove the battery and the AC of the machine and wait for a day. Then try to turn on, is it Wona´t turn on the first time try again (2-3) times. Try it with and without the battery.

  Maybe it is blocking just somewhere. Otherwise I suggest you bring the machine to a technician/service center and let check your machine on some malfunctions of equipment.

  welcome them

• Blue flashing

  I have a 7520 HP printer all in one.  It works fine since I bought it about 8 months ago.  A few days ago the blue wireless light began to Flash.  It flashes for about 30 seconds, then becomes fixed.  After about 2 minutes, it will blink again.  I can always print it.  It just started a couple of days.  My printer is upstairs and the wireless router is downstairs.  How can I stop flashing light?

  It is usually the router, unless the printer has failed.  However...

  These settings are to set up your wireless printer can stay connected to your router, wireless devices stay better connected and make your router secure and hack proof.

  1. define a static in the printer IP address (click here) out of the DHCP of the router Beach (check your manual).

  It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this

  first of all if necessary. More Help Wireless Printing is here.

  2. check the printer "Auto Off" is disabled.  Use the built-in webserver (EWS) by going in the

  the printers IP address in your browser's address bar, click Settings tab/Auto Off. Or use the printer

  Assistant, printer Home Page (EWS).

  In the router: (refer to the manual of your router for more information)

  3. use a wireless channel fixed as 1, 6 or 11, never 'auto', try channel 1 first then the rest.

  4 choose the router to 20 Mhz only, or 145Mbps router function.

  5. always use WPA2-AES encryption (personal), but you can try the "mixed" mode

  6 disable the WPS and never use it and disable the UPnP for the security of routers. No one can hack into your

  now the system and helps with wireless connectivity (if you want to know why, research on the web).

  7. If you have a router dual band (2.4 Ghz and 5.0 Ghz bands), make sure you the SSID is NOT the same.

  they must be different for all the bands, even for networks without comments.

  8. save all settings. Food at the same time, wait 2 minutes.  Power on router wait 2 minutes.

  9. turn on the printer and check that it reconnects to the router.

  Windows 7/8/8.1 is discovered the system on or off?

  1. Control Panel/Network and Internet/network and sharing Center / advanced sharing settings.

  2. Under home or work (current profile) / network discovery.

  3. Select "Turn on network discovery" and save the changes.

• Blue flashing light

  I know that a flashing green light tells me what an e-mail among other things. Now, since the update OS 4.0.3 I get a blue light flashing in more green light (not at the same time.) I don't know what it means that blue light flashes.

  So far, I've seen two colored flashing lights. Green is random notifications (email, game apps) I only saw blue when it notified facebook (comments as far as I know)

• HP photosmart 7520: printer does not print when lite blue flashes

  I just noticed recently that my printer does not print blue wifi lite flashes when the icon of the printer on my computer says printer not connected, but it's all about.  Ive tried unpluging the router, then the printer and restart the computer that gets everything back up and working, but after a while it goes back to blinking and does not print what is wrong.

  Hello

  Asuming the printer is connected wireless, a flashing blue light indicates a lost wifi connection, the pritner is disconnected from your network at the time and so it will not be printed.

  I suggest to place the printer near the router, but not less than 2 metres. too far can cause the connection to become less stable, but also too close distance due to dead radio signal problems.

  Try putting 2-3 meters to test, make sure you there are no metal objects in the path between the pritner and router (which can affect the wireless radio).

  Other that those try after the following steps to solve this kind of problem:

  http://support.HP.com/us-en/product/HP-Photosmart-7520-e-all-in-one-printer/5199461/model/5199462/document/c03381908

  Plwase informed me of a difference

  Shlomi

• TouchSmart IQ846t all-in-One: TouchSmart IQ846t: makes 3 little beeps & a blue flashing light on average low right?

  I heard 3 beeps little while watching the 3 small flashing blue lights on the lower side right of the computer where it bears the name of HP TouchSmart.  He's trying to tell me something, if so, what?

  Thanks for any help.

  Thank you for the information.  Turning on my computer this morning, I received a message asking permission to remove some malware, permission was granted.  I did have more beep sounds or flashing lights so hope it was my problem.  I have printed information and record.  In case the problem should recur, I'll do the self-test memory.

  Thank you for taking the time to answer my question.

• Blue flashing and close issues on Touchsmart 600-1350

  I just started to notice a blue light flashing/blinking on the right the speakers to the computer base.  Can someone tell me what this is about?  In addition, at the stop and try to close programs, the computer sometimes appears to 'freeze' - what I see is a part of the office and I can't do anything but press the button close.  Of course, my warranty has expired there is a month that's why I put these questions on the Forum... Thanks for any help I can get out there!

  Hello cindymazz:

  Blue light you see flashishing is your Wifi transmitter. It blinks because it turns on and turns off. Ma has done since the first day. Now for the gel to the top. Please open HP Support Assistant Cick on bottom of the first screen arrow, and then click on keep. The next window click tune up. The veiw in the next window click settings. Now, click on click here view, select or hide the tasks of development. Now, please check all the boxes box, you see. Click on apply, then ok. Return to the previous window, click tune up. Once started, you should see the red and green circles moving toward the bottom of the list. Can last for 1/2 hour to four hours to complete depending on the size of the deletion of the temporary files and what is on your computer. Now, after this has been done. See how your computer is running. If the freeze ups still continues.

  Then run a check disk on drive c. click on my computer. Then click Properties C.drive now, click on the Tools tab click check now. Next box to check both boxes. Close evevy thing and turn off the computer and restart it. Takes about hour to three hours to complete. This should solve ups freezes your computer.

  Now for your Internet Explorer, you can reset, click Tools go to the bottom of the list, click Internet Options, click on Advanced tab click Reset. Close Internet Explorer open it again. All together now. Try to run the melody of PC in less than twice a month. Several times you use less time to complete. Your welcome. frrw

• PowerEdge R710 lcd blue flashing

  I have 2 of these R710 rack mounted servers. We have a constant blue lcd the other flashes blue. I can't find where it is defined.

  All solutions are welcome.

  Press the cursive 'i' button next to the LCD.  It's the "identify" button... allows you to identify one system among others / scores you need to work on.

• Sleep mode blue flashes instead of orange

  Pavilion Elite E92080F(NY558AA#ABA), Windows 7 64 bit, changed the motherboard, (caused BSOD) update of the Bios. In sleep mode will blink the blue button. In the past was Amber. Back to sleep normally. This can be ignored?

  The difference could be the "food State" enabled in the BIOS, the BIOS updated or new motherboard... If the computer works properly, you ignored the change.

  Frank

• flashing blue background when I start a game

  I have a game called blastzone installed on my computer, but when I try to play replacements for the screen screen blue flashing with the background in game we know why this is happening and how can I fix this I got the game installed on my old computer and it played very well

  Hi monetkahlo931,

  Update the latest video card drivers by visiting the manufacturer's Web site to solve the problem.

  More information about the update of the drivers are available here:

  How to manage devices in Windows XP

• ScanScanp ix500 blue light flashing, does not

  I use a ScanSnap ix500 on a Windows 7 Enterprise environment. I had previously used the ScanSnap on another computer without any problem, and it does not work on the new computer.

  1. the computer identifies ScanSnap. The icon is blue and says "Ready to Scan.

  2. place a piece of paper and it scans about 1/8 of the page before stop - blue flashes for about 1 minute, then a message appears:

  

  I chose to continue the analysis and it hangs on the screen for 1 minute or more:

  

  And then he made the previous message again.

  Some troubleshooting I've already done:

  -uninstalled and reinstalled the software

  -restart the computer

  -connected as a different user and I tried the scanner

  -l' computer plugged into a different electrical outlet

  We were able to try the ScanSnap on another computer - he worked on two separate computers. It is therefore something with this particular computer.

  Any advice?

  Thank you!

  Hello

  I realize has the inconvenience that you are experiencing with the help of ScanScanp ix500. I will certainly help you to question.

  I appreciate your efforts to resolve the issue.

  Make sure that the printer power cord is plugged into an electrical outlet and that the power switch is turned on. If you print to a shared printer, or a printer on a network, make sure that all necessary computers and routers are turned on too. If your printer or other equipment is plugged into a surge protector or a backup power supply, make sure that the equipment is connected and turned on as well.

  I would like to know some information:

  1. Your PC is connected to a private network or a domain?

  2. You did changes to the hardware/software before this problem?

  Also, I suggest to refer to the links below and check if they help:

  Solve printer problems

  Updated a hardware driver that is not working properly

  Automatically get recommended drivers and updates for your hardware

  You can also download and install the latest version of the software driver for your device and check if it helps:

  Software download: ScanSnap iX500

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• m8200n crashes, blue screen, freezes, power light flashes blue in Sleep Mode!

  Hello world! I have the HP m8200n and similar problems for a year now such as published by other people with the Black Out of the screens, screens blue and gel. I did a lot of game online lately and installed a video card, better food, added a GB of ram and a Blu - ray burner and also added some fans inside. I am still using the Windows Home Premium 32 bit OS that comes with it, and all the software is always up-to-date. Only thing I noticed what happens regularly is when the black screen, blue screens or freezing is usually just after I wake the computer from sleep mode. Then I usually attempt to restart it places several times until finally, it starts and works without any problem. Of course, I ran the diagnostics and all past. But just recently noticed when I put my computer into sleep mode, the front power led does not more change to amber color, it just flashes blue and turn off without reason. He always wakes normally when I move the mouse, and the blue light comes on and when I put it in mode 'sleep' it goes back to the blue flashing light. In addition, when I start to play online the rear case fan begins to spend a quick back and forth and then at normal speed. Usually, I try to blow and clean up so much dust that I can possibly do. But I wonder if these are all signs that my computer is about to fail completely? No matter how useful counsel that it would be VERY, VERY, very appreciated!  Thank you!

  I have same m8200n and same night Mare, I pulled out one of the ram sticks first the left right and fixed it