vicfg-snmp fails against vCenter

Similar Questions

• Once to submit the application through Blues draw relies fail to Vcenter

  Once to submit the application through Blues draw relies fail to Vcenter

  Check your size VCDB and shrink your database and try

• Running PowerCLI scripting against vCenter occupies space of database in vCenter?

  Hi all

  Someone can confirm, running or collecting data using PowerCLI against vCenter occupy or use vCenter database space?

  Some commands (generally the things which create, modify (including the power on/off/suspend/move/run, etc.). or remove) will create event entries will be stored in the database of vCenter. Others who may are Connect-VIServer can also register an event. The "Get" cmdlets will not create entered events

  You can identify those who have the VI Client open and see if the script causes all events appear in the lower pane or by running Get-VIEvent on the vCenter server after your script is run (search for events based on the username)

• SNMP Configurations require vCenter?

  I am running vCenter on top a pair of cluster 2 ESXi hosts 4.1.0u3.  I have configured the Protocol SNMP configurations is vCenter to point to our appropriate receiver.

  A few questions come to mind with this, can someone enlighten me please!

  
  

  Although the SNMP configuration is applied in the vCenter settings, they need to be configured on each host ESXi?  If so, how it works?

  On a separate scenario (has nothing to do with the above), I have 2 ESXi hosts running ESXi 4.1.0u3 - but they are not in a cluster and do NOT contain a vCenter Server.

  How can I go about configuring SNMP for each of these individual ESXi hosts?

  Thanks for the help guys prerequisites!

  I remember using vcli for the same. Discover this useful KB

• vicfg-snmp - error?

  Hi all, Im trying to configure snmp and Im getting an error of law to off the bat.  Here is a paste of my VCLI order:

  C:\Program Files (x 86) \VMware\VMware vSphere CLI\bin > vicfg - snmp.pl - Server xx.x
  XX.xx.xx - username root - password * - c * p - X t xx.xxx.xx.xxx@162/***
  Password option requires an argument
  For a summary of the use of the command, type "C:\Program Files (x 86) \VMware\VMware vSphe"
  help re CLI\bin\vicfg-snmp.pl--'.
  For documentation, type "perldoc C:\Program Files (x 86) \VMware\VMware vSphere CL"
  I\bin\vicfg-SNMP.pl'.

  Don't know what the password Option requires an argument means?  I followed the instructions on how to configure snmp.  Maybe someone can help out me?

  additional information:

  ESX worm - 4.0

  root is active ssh

  I tried 4.0 and 4.1 of the VMCLI

  Have you tried the password in quotes or without the option of password?  Or your password has special characters?  If it then he puts a quotes.

• ISE Voip phones: authentication failed against AD

  the message is

  2064 authentication method is not supported by any point of sale there is identity: authentication failed

  the user is present on the AD and test user to ise is ok

  the rule for check in AD authentication is created

  servers of strategy are fulfilled and in green

  If I create an internal user (just to test) authentication is ok

  my sequence of authentication is:

  MAB

  mab_ad

  dot1x

  dot1x_ad

  These phones use eap - md5

  I guess there is something to check in AD, can someone help me solve this problem?

  I don't think that Active directory supports EAP - Md5.

  I will recommend rather to use EAP - TLS. Most of the Cisco IP phones have certificates built-in MIC, which really helps to deploy EAP - TLS

• Database enrollment 11.2 fails against 12.1 CRS

  I'm not able to register the database with 12cR1 CRS. Gettting error as follows,

  3.2 - bash$ /opt/oracle/product/11.2.0/db3/bin/srvctl add the d 11gr2tstdb o /opt/oracle/product/11.2.0/db3 database

  RPRC-1006: cannot add resources ora.nishtest.db for nishtest

  PRCD-1184: failed to update the configuration of the type of database to version 11.2.0.3.0

  RPRC-1071: cannot save or update resource type ora.database.type

  CRS-0245: user has insufficient privileges to perform the operation

  3.2 - bash$ /opt/oracle/product/11.2.0/db3/bin/srvctl add the d 11gr2tstdb o /opt/oracle/product/11.2.0/db3 database

  RPRC-1006: cannot add the resource ora.11gr2tstdb for 11gr2tstdb .db

  PRCD-1184: failed to update the configuration of the type of database to version 11.2.0.3.0

  RPRC-1071: cannot save or update resource type ora.database.type

  CRS-0245: user has insufficient privileges to perform the operation

  Error:

  CRS-0245: user has insufficient privileges to perform the operation

  Analyze:

  #. / status ora.database.type Pei type crsctl | grep DEFAULT_VALUE = owner

  Default_value = owner: root: rwx, pgrp:dba:rwx, other:r - group: dba:r - x, user: oracle: r - x

  Problem:

  User oracle doesnot have the permission to add the oracle resource

  Solution

  As user Root, run the following commands

  . / crsctl change type ora.database.type - attr "ATTRIBUTE = TYPE_ACL, DEFAULT_VALUE =' group: dba:r, other::r, pgrp:dba:rwx, owner: root: rwx - x, user: oracle: rwx'."

  . / crsctl change type ora.service.type - attr "ATTRIBUTE = TYPE_ACL, DEFAULT_VALUE =' group: dba:r, other::r, pgrp:dba:rwx, owner: root: rwx - x, user: oracle: rwx'."

  Then try to start the databases.

• Multiple SNMP IP addresses on the ESX host

  I try to set up 2 x SNMP IPs but failed to get the correct syntax (VMware vSphere 5.1)

  "C:\Program Files (x 86) \VMware\VMware vSphere CLI\bin\vicfg-snmp.pl" - Server ESX01 - root username - password PASSWORD123 ESX-c t 172.16.1.1,172.16.1.2@161/ESX--activer

  Can anyone offer some advice?

  You send messages in the forum ESX 3.5, but talk about vSphere 5.1!

  In any case, advice on http://www.vm-help.com/esx/esx3i/esx_3i_rcli/vicfg-snmp.php could help.

  André

• SNMP does not

  We have a problem with a couple of ESXi hosts that do not respond to SNMP.

  They are clean installed ESXi 5.0 build 768111

  Material:

  Reference Dell R910 (no VIB Dell installed, works with or without).

  Standard configuration of the SNMP via VMware CLI:

  VMware vSphere CLI > vicfg - snmp.pl - the esx01 - username the server - password aaaaaaaaaaaa - c public root

  Evolution Community list to: public...
  All.
  
  
  VMware vSphere CLI > vicfg - snmp.pl - esx01 - username root - password aaaaaaaaaaaa - activate

  Clearance agent...

  All.

  Firewall is open. Ask to come, but there is a lot on the receive queue when checking 'netstat' SNMP (port 161)

  list ip # esxcli network connection

  Send a Proto Recv Q Q address local foreign address State ID world name

  -----  ------  ------  ------------------  -----------------  -----------  --------  ---------------

  TCP 0 0 127.0.0.1:8307 127.0.0.1:52518 ESTABLISHED 20681 worker spend

  TCP 0 0 127.0.0.1:52518 127.0.0.1:8307 ESTABLISHED 20882 worker spend

  TCP 0 0 127.0.0.1:60453 127.0.0.1:443 ESTABLISHED 20175 worker spend

  UDP 17967 0 0.0.0.0:161 0.0.0.0:0 20178 worker spend

  We restarted management agents, reset the configuration of snmp, reinstalled servers, but a couple of them will not work and get its queue.

  Any ideas?

  Can you run and view the results of the command of the option - show;

  vicfg - snmp.pl - esx01 - server - password aaaaaaaaaaaa root username - see the

  You should see something like this;

  ===============================

  Current settings of the SNMP agent:
  Activated: 1
  UDP port: 161

  Communities:
  public
  anothercommunity

  Targets of notification:
  mysnmptarget1. FQDN@162/public
  mysnmptarget2. FQDN@162/anothercommunity

  Options:
  EnvEventSource = sensors

  ===============================

  I have found that the option - enable command creates another firewall rule called "dynamicbinding" even if SNMP is already created by deault on own insall of ESXi 5.0 (I'd do it role it back and use PowerCLI to activate it).

  vicfg - snmp.pl - esx01 - username root - password aaaaaaaaaaaa - disable

  # Activate SNMP using PowerCLI (to connect to the host, not vCenter)
  Get-VMHostSnmp | Set-VMHostSnmp-enabled: $true

  # Add communities
  Get-VMHostSnmp | Game-VMHostSnmp - public ReadOnlyCommunity, anothercommunity

  # Add a target
  Get-VMHostSnmp | Game-VMHostSnmp - TargetCommunity "public" - "mysnmptarget1.fqdn" TargetPort TargetHost - 162 - AddTarget
  Get-VMHostSnmp | Game-VMHostSnmp - TargetCommunity 'anothercommunity' - 'mysnmptarget2.fqdn' TargetPort TargetHost - 162 - AddTarget

  In addition, on DELL hardware, I have found that for traps to be translated correctly "EnvEventSource" must change indications to the sensors.

  This will change

  vicfg - snmp.pl - the esx01 - username root of the server - sensors - hwsrc password aaaaaaaaaaaa

  Then, you can send a trap to test;

  vicfg - snmp.pl - esx01 - username root - password aaaaaaaaaaaa - test

  See you soon,.

  Jon

• Notification of failed Direct debit payment

  Is it possible to control which admin users receive notification of 'Payment by Direct debit has failed' when a periodic invoice fails against the stored credit card? I don't see any way to customize the email itself, or what workflow that he uses.

  The short answer is no.

  You can not or control anything with that. Its really annoying that all users no matter what role they are assigned are getting these emails... absolutely not realistic.

• vicfg-orders are not

  Hi all, I am trying to configure SNMP on my 5.0 host but unfortunately vicfg-commands are not found. can I know how to activate it?

  Hi dhanarajramesh,

  vicfg-* commands are not part of the ESXi 5.0 installation. You need VMware vSphere CLI (vCLI). This must be installed on a client computer running Windows or Linux OS.

  You can download this from:

  https://my.VMware.com/group/VMware/details?downloadGroup=VCLI50U1&ProductID=229

  Below of KB has a few examples of how using the vicfg-snmp commands to configure SNMP on ESXi host.

  VMware KB: Configure SNMP interruptions in ESXi/ESX

  I hope this helps.

• Workflow trigger SNMP Trap

  Try to get a SNMP trap to trigger a workflow to send an e-mail after a snapshot was taken.

  Run the workflow 'Register of a SNMP device' in the vCO under library folder and configure SNMP receivers in vCenter Server under Administration-> Server Settings-> SNMP vCenter. In workflow vCO and vCenter Server port value should be 4000.

  Kind regards

  SK

• pass fails with a missing resource pool alert

  Hi, I have a server dell power edge r510, with ESXi 5.0 is installed in it.

  in one of the virtual machines within this server, I installed Vcenter (I think that it is Version 5.1) everything was stable until the vcenter database gets 10 GB and crashed and I couldn't fix it. So I installed a new windows with vcenter 5.5 inside vps. and for this new vcenter reconnected to the server. so, I've reconfigured resource pools and VPS users again in this new vcenter.

  Watch ESXi host now as does not not to the vcenter. but all virtual machines inside the esxi server work without problems.  I can't reconnect to the host in vcenter, and I can't connect directly to the ESXi via vsphere client and root password.

  but I can log on to the esxi via ssh or console.

  from the console, I restarted the management services, but it does not help.

  the SSH, I ran the following commands:

  status /etc/init.d/vpxa #.

  vpxa is running

  status /etc/init.d/hostd #.

  pass is not running.

  When I restart pass, it is said has started, but after a few minutes still pass fails.

  l # /etc/init.d/hostd restart

  Watchdog - pass: PID of the file/var/run/vmware/watchdog-hostd. PID does not exist

  Watchdog - pass: impossible to end guard dog: no monitoring running processes to pass

  SH: you must specify which kill

  [421281] Begin ' pass ++ min = 0, swap, group = pass etc/vmware/hostd/config.xml', min-uptime = 60, max-fast-failures = 1, max-total-failures = 1000000, bg_pid_file = "

  pass began.

  **********************************************************

  status /etc/init.d/hostd #.

  pass is running.

  ***************************************************************

  but I can't use all the controls of esxcli.

  List of the allowedip of esxcli network firewall ruleset

  Connect to locahost failed: connection failure

  ************************************************************

  status /etc/init.d/hostd #.

  pass is not running.

  ***************************************************************

  I searched the problem on localhost, Ko, said check the CPU usage is below 90%, which is good in my esxtop, then says check network ports and pings, they were right, too, said to check/etc/hosts to 127.0.0.1 localhost entry and checking /etc/resolv.conf and they were right too. as I can ping localhost and localhost nslookup returns 127.0.0.1

  then I started reading the server logs and found this error output of vm-support: hostd.log

  [cntos58-64-Farzin - 105.vmx'] could not get the parameters of resource for a virtual machine under tension

  Award of the VM ' / vmfs/volumes/.../cntos58-64-Farzin-105.vmx' to the root resource pool - configured pool 'pool11' does not exist

  SysInfo error on return operation State: verification of Admission of cpu resource failure. See the VMkernel detailed error information log

  cntos58-64-Farzin - 105.vmx: vim.fault.InsufficientCpuResourcesFault

  *************************************************************************

  How can I change the list of resources of the VM to ssh when esxcli do not work?

  I am facing this problem recently, almost all the 5 days the server will respond is not in vcenter, restart the entire esxi server can solve the problem but it apears again.

  I think that resource in vcenter pools doesn't sync properly with the configuration of esxi, as when I connect to the server directly with root/vshpere it shows different configuration than what I see in vcenter!

  and I can't upgrade esxi host because there are about 10 VPSes important and stable running on this server which is my main server and I can not have time on this server or migrate virtual machines to a different server/IPs.

  because I'm not sure of the compatibility of the versions of drivers/bios nic with ESXi 5.5 and I fear that if I update the ESXi from 5.0 to 5.5 I face other questions strangers/downtime.

  I had the server up and running again, by editing this file: /etc/vmware/hostd/pools.xml

  then I found the VPS with id of the pool of resources 11 evil, changed for another pool of resources as the other virtual machines.

  2014 07-29 T 08: 38:52.64965Z

  2

  pool366

  and then made a

  restart the /etc/init.d/hostd

  all started working again without restarting the whole esxi server and turn off virtual machines, I have searched for about 1 day to solve this simple thing!

  even once when I made a few changes in the vcenter, and then restarted resource pool settings move it in ssh, it fails under vcenter changed the VM resource for a bad configuration pool.

  so I changed the resource pool manually xml and restarted spend, while vcenter can connect to the esxi host.

  then vcenter, again removed all the resource pools and created new resource pools. and this question of time is set.

  There was some resource pool configuration that was imported from esxi host to vcenter which was no longer available and has not been deleted in syncronizations between esxi and vcenter when changed resource pools. and the list of the missing resources caused problems.

• P2V with vcenter 5.5

  Hello

  I was looking for the Vcenter of P2V version, but I can only see the standalone download. The independent running against Vcenter what I see needs tweaks to work.

  If there is a version of business?

  Thank you

  I always toilet integrate vCenter Converter was an obscure idea. IMHO converter must be installed in a stand-alone VM Win7 sweet even it is not part of a domain. After the installation of the converter the vmdk can be set to nonpersistant mode, so this converter is always clean.
  In any case, there is no version company - so you must fix the errors you get now...

  It works if you approach an ESXi directly?

• Dell VRTX + vCenter 5.5 + Shared storage is ESXi host import issue in vCenter. Help, please!

  All,

  I have two VRTX to be used for lab purposes that I am currently in configuration.

  Blades feature 4 VRTX with a shared storage infrastructure. Each blade has 5.5 installed on ESXi.

  I configured the shared on the VRTX storage, and all the blades can go very well.

  The question I'm currently facing is when you add the vCenter for managing ESXi hosts.

  Add the first host goes without a hitch. However, add any later host fail, because vCenter finds datastore attached hosts to have the same identifier.

  The error message is (see the attached screenshot): ' Datastore 'Main Shared-storage' is in conflict with a store of data that exists in the data center which has the same URL (ds: / / vmfs/volumes/xxxxx /), but is supported by different physical storage.

  Someone knows how to fix this?

  Thank you.

  Thanks for the reply.

  I think that I have found a workaround.

  First of all, this link does not address my particular issue.

  See, it's a whole new vCenter device installation and configuration. Only one of the four hosts to add host has been added.

  Still, the problem is that each ESXi host is a blade VRTX (M620), which has access to the data store created on the shared storage of VRTX.

  Basically, each host is editing the data store shared even (the only data store created on the shared storage), which works very well except for vCenter complain when you import the hosts.

  In any case, my resolution was as follows:

  -Add the first host with the attached and mounted data store

  -Remove the data store and detach the controller shared by other guests before adding in vCenter

  -Re-attach the controller shared and set up the data store via vCenter once guests have been added

  -Re-configure each host for vSphere HA if necessary

  Thank you.