Video accelerates when they are imported, but the audio is normal at PE7

Similar Questions

• Audio disappears from the video file when they are imported, please help!

  Hello

  When I open a new project and create a sequence, usually I import a. File video TS that automatically gets a blue label. When I hang out in the sequence, the video will appear in a video slot machine and associated audio appears in an audio connector. However, lately, about completely random, when video files I import them, they come with a purple autiomatically label assigned to them, and when I drag them on the sequence, there are only videos or sound only. PPCS6, when I go into the properties of the video in the software, records that the. TS file has any audio associated - yet when I look at the file outside of the software, it is very good and has the audio.

  Can someone help me please? It's quite urgent and I would appreciate it.

  Thank you.

  Update: just installed the update, did not know it was there! It seems to have corrected, thanks for letting me know! I hope that it doesn't yet, but I'll be sure to come back if she does.

• Videos curtailed when they are imported

  I was importing images taken on a handycam (Panasonic HDC-HS20) that has been saved on the hard drive of my Mac, and once it is imported they are cut short. As far as I know, they are a Quicktime movie file type (although I'm no expert). They are relatively short excerpts (most of them only 6-30 seconds in duration) and the amount of missing time of each clip can vary. I am able to display them in their full length in iPhoto and Quicktime. I tried to import from within first Pro CC and by dragging and dropping them in Premiere Pro, the two senses seem to also cut short video. In addition, missing images are taken at random points, leaving the audio out of sync.

  Any help is appreciated!

  How did you get the images in your Mac?

  Open one of the files on your hard drive and open it in Quicktime. Once the file is open, go to the window menu > show Inspector. An inspector pane opens, either report what the inspector said, or take a screenshot and post that here, as in the following example:

  

  In addition, if you can see the full clip in iPhoto, select the item in iPhoto and export it. Try the ingestion of that clip in the first. Do you see now all content?

  MtD

• audio out of sync when they are imported into the first, very much in the original

  I worked with the same configuration for about six months now, but I'll have a new problem - the noise is at the mouth of singers on my original videos (.mov format) but when I import into first to try to change them, it no longer matches. I don't know what to do - should I move the corresponding audio track, or is there another question?  I have not met this before; It's a show, and I thought it was originally an audio delay to be in different places in the public, but it's the same with the two videos.

  Thank you!

  I would use the original film.

  Assuming you're on CC2104 drag an item in the timeline to make a corresponding sequence.

  When all changes are make export to mpeg2-dvd to dvd and H.264 for Youtube.

• Deadline - Portions to 1 second image drops when they are imported into the Assembly or project view

  Unlisted watch Youtube clips the prob in action. Let me say in advance... THANKS for any help in this regard, I desperately need an answer...

  My Max OSX 10.9.5 system

  32 GB memory

  Adobe Premiere Pro CC

  Pegasus 32 TB external hard drive

  My images has a tornado that is lit by lightning in 1 sec and you can clearly see the Tornado and fell in love, in fact in this interval of 1 second you can see a discreet bolt of lightning, and then also a quick illuminated new light of the tornado.

  I captured images in a project of first Pro CC.  View mpeg capture scratch via quicktime, it shows the images exactly as described above w/lightning and tornado.  WHEN I IMPORTED the images capture scratch in the project and then in the timeline panel, and then display the images in the source window or viewer in FULL or any resolution THAT SECOND IMAGE with the lightning bolt does not appear... what I see is a very low light clarification of the entire scene. Average read made lightning over-saturating part any of this framework, so it's not a problem.  It is as if parts of everything that happens in this second 1 disappeared, lightning does not appear.

  I have a deadline to get this off tornado with crush, he's the only one of the images of this particular event.  Images of 2008 and I did a clip on youtube then but with a windows computer and God only knows what crappy editing system, I used then.  I don't have access to one of these files just to remove the watermarks, etc.  You can view the clip from youtube https://www.youtube.com/watch?v=44AorUnqQhg in the first few seconds of the clip, you can see a drain of the frame of the portion of the video that I can't see when editing in Adobe first Pro CC.  Also please do not judge me on the change of my competence, I came a long way since that time, as you can see in this clip https://www.youtube.com/watch?v=kUGwDdzTk4w and other clips on our YouTube's TornadoAlleyVideo channel.  Thanks for any help.

  The HDV 1080i time sequence settings based 29.97 images per second Codec 1440/1080

  Thank you!  Display two fields solved the problem... Thank you very much!

• Changes of animated character when they are imported into the PS AE

  Hello world

  I am in the early stages of learning about character rigging and animation and I met a weird problem.

  My drawing changes slightly between Photoshop and After Effects, and I have no idea why.

  The character is RGB in the two platforms, and I imported as a composition. What is going on? How do I keep the images when switching between platforms?

  Photoshop (the RIGHT image... Note the lines):

  

  After Effects (the BAD image... wtf happened to my shots?):

  

  in CS6, you can have your form features in Ae Ps, if you import a psd with option "Merge Layer Styles" is selected

  

  PS

  

  AE

  

  and you would be right in thinking: ' this isn't a layer style!...» "but maybe that's a debate for later

• How to stop the movieclip created in flash when they are imported to seduce?

  I created a movieclip and drag it onto the main timeline(flash cs4), the movieclip have 60 fps and I put stop(); the last image. When they are imported from the swf to Captivate, the movieclip loop play. I tried the rdcmndPause = 1; but don't know where to put it. I don't really know the idea how to proceed. (already search in the forum and read adobe help, but no step by step how to do this).

  Hello

  Maybe try to animate your Flash in the main Flash timeline. I don't know if it is possible to promote a MovieClip to the main timeline, but usually people want the animation to loop and it doesn't and it is because they have not animate in a MovieClip. They did it in the main Flash timeline.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Red video and no sound at the end of the clip 3 hours when they are imported into first

  Hi all

  I currently have a problem with first Pro CC when a clip of 3 hours that I recorded (720 p/24 fps) using XSplit loses video and audio in the last 10 minutes when they are imported into first. The rest of the video is perfectly fine, but this section of it does not correctly (it goes forever, one minute or more per image) and will not export the missing without audio recall bias, and the video (export fails at the end). The clip is a created and coded by XSplit MP4 file and is able to normally play outside Premiere.When overview in the first, reading only shows a screen completely red. There is no effects applied to the element, or any change to the it.

  I tried to clear my cache preview and import the clip into a new project with exactly the same results in the same place in the clip.

  Thanks for any help!

  Hi, IPA,.

  You have a video file that has a variable rate, which does not work with Premiere Pro. You can transcode the file, and then it should work OK. Many people use the brake hand or similar.

  Thank you
  Kevin

• Here's a strange. I have a HTML page with this time a wmv video. It works perfectly from a USB stick or SD card, but does not work when they are copied to the hard drive

  I have an HTML page created with web expression 4. It contains only a wmv video. It works perfectly when it is called from a USB stick or SD card, but does not work when they are copied to the hard drive. The results are the same with IE and Firefox. It don't make no difference if I use Media Player V9 or V11. He has no control on the page Media Player. Video and html files are in the same directory. Here is the code snippet:

  LIFT, DRAG, THRUST and GRAVITY

  
  

  
  
  

  If I run it on a machine with Win 7 there is no problem.

  Richard Grosser

  Hi Richard c. Grosser,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Microsoft Expression forums.

  http://social.expression.Microsoft.com/forums/en-us/categories

• Help! Photoshop edited jpg color false when they are imported into Muse

  Okay, so I try to build a Web page of photography (among others) and I change most of my photos in photoshop. All the photos I edit in photoshop and save it in jpg format, look great when printed, uploaded on facebook etc, but when I import them into Adobe Muse for and put them on my page Web, the colors of the photos becomes desatures or distort slightly (so that they appear dull). When I edit images in lightroom and save them in jpg format and import them into Muse, they look fine, but colours edited in photoshop seem to spoil my pictures when they are imported into Muse.

  What I am doing wrong?

  Susan

  You are using some weird color management settings and do not convert to sRGB probably... Check your settings in PS itself and save for Web dialogue box and experiment around.

  Mylenium

• LiveCycle Form - submit does not work when they are copied to the new application folder

  I basically copied my application folder app1 app2 of request code; nothing else has really changed.  I even did a global search and replace for 'app1\' to 'app2\ '; However, the submission process is used to working in the app1 file no longer works now.  Someone please guidance on what could be wrong?  I'm not allowed to post these forms.  Thanks in advance!

  It is a good idea.  In my case, I was able to solve the problem simply by performing a regular expression replacement:

  "\bapp1\b" with "app2"; of course, it's high risk, as "app1" was everywhere in my particular project.  In addition, the "xml" of resource file needs to be renamed in app2 when they are copied to the adobe/config file to avoid a collison name (if separate app1 and app2 to work).  For me, it worked; However, I could easily imagine a project where all this change of name would cause problems, I hope that those who would be easily traceable.  But thanks for the answer, it is always appreciated.

• file .avi and .mov on iMac changed in .m4v when they are copied to the external hard drive. I will be able to open these files on other devices like a Windows PC?

  file .avi and .mov on iMac changed in .m4v when they are copied to the external hard drive. I will be able to open these files on other devices like a Windows PC?

  FWIW, do not change the extensions of file simply by copying the files to an external drive.

• Check boxes are displayed incorrectly < input type = "checkbox", "checked" > in 4.0.1 when they are fine for the same page in 3.6.17

  Check boxes are not displayed properly checked < input type = "checkbox", "checked" > in 4.0.1 when they are fine for the same page in 3.6.17

  Maybe you can try to use controlled instead of "checked".

• Why video AVCHD still presents itself as "File of Format not supported" when they are imported into CS5?

  I've been editing AVCHD with CS5 for several months, but every time I import video AVCHD first always displays a message box titled "File import Failure", all lists of imported files, and then at the bottom of the window, it says ' Error Message: file format not supported ".  You click on the 'OK' button and change with the film without problem.

  I was wondering why this message still comes up if the film is supported in CS5.

  Just MTS files are probably very well; First is quite smart to seize what he needs in the other files, as long as the file structure is intact. An even easier way would be to use the media browser; Navigate to the folder containing the AVCHD folder structure, and the MB will flip mode display of AVCHD. It will give you a list of all the files contained in the folder of DATA flow, without having to actually dive into the file STREAM. Select some or all of the files and import them into your project.

  The message "File Format not supported" is due to all of the files you listed; some of them are used by first behind the scenes, but they are not the media themselves, so that they can not and do not need to import.

• Canon 5 d Mark ii Images with the value of the white balance fixed. When they are imported into Lightroom, the value is different.

  If I take a shot with the fixed value of 5200K WB (5 d Mark ii) and import into LR 2015.2.1, happens to 4850K. No presets or applied adjustments.

  No idea why? How can I solve this problem?

  Rich

  All raw converters use four multipliers of white balance RGGB tinted and embedded in the raw file EXIF data to set the white balance and 'calculate' the temperature values displayed inside the module development LR WB.

  Scroll down to the "White Balance" section of the DCRAW tutorial PDF here: GUILLERMO LUIJK > TUTORIALS > DCRAW TUTORIAL it's all so raw converters all the rest of the white raw file and 'calculate' the temperature and tint values.

  Here is a Canon 5 d MKII CR2 file with the White Balance adjustment 'in the know' behind closed doors:

  (Data EXIF Maker Notes)

  

  The setting "As Shot" WB in LR shows a Temp of 4800 reading, which should produce a slight visual difference that the planned in-camera closed 5134 parameter, correct?

  

  However, with the LR settings file, "As Shot" above the white balance CR2 is the JPEG file in camera perfectly on my Canon 5 d MKII (raw + JPEG file format). It's just that Temp readings do not, because they are "calculated" four RGGB multipliers. Each raw (LR, opening, C1) converter will probably show the values of temperature and tint different, since they are derived by using "reverse engineering" of the manufacturer of exclusive camera raw data structure and camera sensor response file.

  Keep in mind that the spectral response of the camera is affected by changes in batch. A Canon 5 d MKII body can produce slightly different WB as one another using the same exact settings. Rather than depend on private clos or LR presets use a good white balance card or the ColorChecker Passport to 'calibrate' LR white balance settings standard shooting conditions (daylight, cloudy, Flash, etc.). For critical projects draw card of the white balance at least once for each unique lighting condition. You can then determine the correct inside the LR setting and settings of synchronization of the World Bank through all the images taken with this specific lighting.