Video / Audio Out of Sync - export

Similar Questions

• Netflix Video & Audio Out of Sync

  Yes Hello everyone, so here's my problem.  Whenever I play a video on Netflix, it is OK for a few minutes.  Then all of a sudden, the video and the audio is out of sync.  It begins while the video starts to move slower and slower like a Godzilla movie or slideshow as executives almost.  Then it will just completely out of sync with the audio.  As the video goes well ahead of what said the audio.

  I tried to disable all audio enhancements, close all other browsers and applications, stop certain processes and services, as well as a last resort to install a new clean copy of windows.  Still nothing helps.  I am about to give up and just be upgraded ram 8 GB from 4 GB and buy a 4 G Modem.  I don't know what else to do.

  Any suggestions?  And here's my laptop specs:

  Dell Latitude E6400 Intel Core 2 Duo with a frequency of 2.66 GHz, 4 GB Ram, a 250 GB HDD wifi speed is 10 Mbps.  And I have tried different browsers as well.  I tried to watch it in IE 10, Google Chrome, firefox same &.  Firefox works best very little out of sync, but it's still there.  So I'm at my wits end.  I don't know what else to do.

  Any suggestions or advice would be really helpful at this stage.  And if you have any questions do not hesitate to ask!  Thank you once again.

  Airin

  I stopped allowing the HD.  You can do it in the game by placing the cursor on the HD button and unchecking the box.  Worked perfectly for me.

• BlackBerry Smartphones video / Audio Out of sync

  I have a BB9650 with 5.0 o/s.  The only problem is when I play videos the real Visual and audio are not synchronized.  Complete the part of the video and the audio ends then.  On long videos, this can be important.  I reloaded the video using Desktop Manager and it still does not work.  I will NOT use 6 o/s because it's a bad operating system, using more than 50% of the RAM and slow down my BB so it crashes all the time.

  I appreciate any help anyone can provide.

  Hey fireman47960,

  What format is the video? The following document has information on supported video formats:

  http://docs.BlackBerry.com/en/smartphone_users/deliverables/18349/711-01774-123_Supported_Media_Type...

  If the file is a supported format try to remove the file from the device and then use "Mass storage Mode" and copy the file on the memory card and the test.

  1. how to enable or disable the mode on the smartphone BlackBerry mass storage: http://btsc.webapps.blackberry.com/btsc/KB13564

  2. open my computer on the Windows desktop, and then open the media card in the devices with removable storage.

  3. copy the file in the video folder.

• Video - Audio out of sync on long clips - CC 7.2.2

  When I import videos DivX encoded since long (90 minutes), audio-video is perfectly synchronized to the beginning of the clip.

  But 60 minutes, the audio is on 1-second ahead of the video - as a film Kung Fu badly produced since the 1970s.

  Towards the end of the clip, it's even worse.

  I have been Unlinking clips so I can move independently audio and video, but it has tripled the time required to complete a job.

  No idea how to solve this problem?

  > Videos DivX encoded

  XviD/Divx are output files, not intended to be modified (variations of the codec MPEG4, often used for streaming video on the Internet) so, they mostly edit NOT well (if at all) in any flavor first, even if encapsulated within an AVI container

  Even the STAFF tell you! http://forums.Adobe.com/thread/1441404?TSTART=0

• Video quality has dropped and Audio Out of sync (EPA 12)

  Edited a video of 30 minutes and took a few clips of him. After the project and saving it, I noticed a severe drop in video quality and despite to realign the tracks audio/video, audio installs always out of sync. Original video clip plays fine and I would just download those, but there are too many dead zones and some splicing that needs to be addressed. At first I cut sections of video caused the problem, but the video before editing it produced out of sync titles as well. on a 30 minute video, audio Animes before nearly 10 seconds.

  EPA 12 Windows 8.1.

  Video camera: Replay 720XD (manual specifies EPA or Quicktime [Pro] Edition)

  Video information by gspot: 29.412 FPS; Resolution 1280 x 720; Audio codec: MP4a:Mpeg - 4 AAC LC video: avc1 H.264/MPEG-4 AVC

  QuickTime is also updated.

  I was see several other discussions on this topic with different answers, which makes me think that every problem is something different. Also, there are not too many threads with solutions. Also concerned by the fact that this problem seems to go as far as 10 EPA.

  BadWolfRacing

  I see no mention of rate constant or variable in the documents of the camera (only 30/60 NTSC or PAL 25/50).

  The only clue that I don't have that cadence is variable, it is as 29.412 frames per second that you give to your video.

  I had advanced for the camera users section and can't find anything that goes with this question. If your camera records with a constant speed then you will see 29.97 or 30 and not 29.412.

  We support the idea of constant compared to variable rate for your video by running the video via the properties of MediaInfo program playback. If your video has a variable rate, reading on will give a minimum, 'general' and maximum playback for cadence.

  http://sourceforge.NET/projects/MediaInfo/

  Just be careful for carryons unwanted in the download of this program.

  You seem to have 1280 x 720 @ 29,412 progressive frames per second (variable frequency), presenting as AVCHD.mov. And apparently you transfer the recording to the camera as the video compression AVCHD (MPEG4 AVC/H.264).mov, not a "MPEG" such as MPEG2 video compression...

  Variable rate in first Elements = always no problem. I have the iPod video and iPhone 5 (with variable rate) and any import problems (audio out of sync or other), edition, exported from Premiere Elements set the correct project presets and work with content timeline made. There are some who have problems. For them, the answer is borrow the video in software to change the variable in a constant rate.

  Whether you use the original or the original converted to the hand brake

  The project preset

  NTSC

  AVCHD

  AVCHD LITE 720p30

  Export of QuickTime H.264.mov (720 p 30)

  Publish + share

  Computer

  QuickTIme

  with Presets = NTSC DV 16:9

  and, under the Advanced button/video settings tab, make sure that settings are as shown in the screenshot

  

  The transmission speed is cut in the screenshot. Leave it disabled for now. We can talk about Bitrate and file size later.

  Export for AVCHD AVCHD.mp4 (720 p 30)

  

  Please read the above and let us know if any information improved the situation.

  Any questions or need clarification, please ask.

  Thank you.

  RTA

  Add on... Just in the notes on the case... the publication + share/computer has more choices than Adobe Flash Video, MPEG and AVCHD. The need for rest to scroll to with the tiny scroll right bar. Or, you can click on Adobe Flash Video, so that the Panel will turn blue. Then use the down arrow key to move to the bottom of the list or the up arrow to move to the top of the list.

• FLV audio/video is out of sync

  I have a video that consists of a FLV imported into the timeline, so that I can put a new background behind the background alpha-channeled from the film to put other things in front of her. When I export in SWF, it plays quite simply awesome. However, the download is a killer on the speed of ADSL connection, so I thought I would try to make the finished product in a FLV. I have to export under QT movie first, then QT Pro export to FLV. It loads a lot faster, however the film audio and video get out of sync from the first minute (it's 4 1/2 minutes long), and at the end he looks terrible. Is there a cure for this? Video has been maintained at 30 fps thoughout the process.

  I found the problem, chabotjeff. The problem was when I exported as FLA QT so that I could do the FLV file. When I tested the exported sequence of QT coming from Flash, I found that the problem of synchronization was there all along. So instead of export to Flash, I played the SWF and captured using SnapzPro. Works fine now. Thanks for the advice, if.

• Audio out of sync and missing

  I have several clips of my Panasonic LX-5 (720 p). I created a new project (CS 5.5) and import the clips. When I play the file directly from Windows Explorer, all right. However, in the timeline, the audio is ahead of the video, then partially through an element, the audio disappears altogether. In addition, the line in the upper part of the sequence is yellow (above the transitions, it is green). I thought that perhaps the final exported file would be nice, but he had the audio out of sync and missing in the same places, too.

  Any ideas what's happening here?

  Thank you

  Jay

  Thanks for the offer, Jim. It turns out that, delete the files from the cache of forced media audio again in line (as when a fall new video clips in the bin in a project). That fixed it.

• Audio Out of Sync and Insert Clip out of a framework

  I record my audio and video separately. I use the merge Clips feature to merge together, now made dozens of times, never a problem. He did it with this new project, everything looks and sounds very good.

  But when you change the pieces of an element in a sequence, each inserted bit is the "audio is out of sych" red text. It is out-of - 0:72 to a clip or - 0:87 for another.

  However, it is not enough for me to see when I play it back, so I did fi from it as I change. Sometimes I slip in sync to remove the red text, I can't make a difference.

  But also sometimes when I insert an element in the current sequence, the marker/cursor script (don't know what it's called, the line blue large marking this place in the sequence where everything I insert will be inserted) is disabled by a frame. Sometimes it's off in one direction, which means that I get random empty images in playback, or it is off in the other direction and I am slowly accumulated unique axe off executives.

  Someone has an idea of what's going on? How the audio is out of sync in the first place? Why the function Insert Clip move the cursor in a strange place?

  Nevermind, I figured it. I chose the wrong preset when I made a new sequence. 60 frames per second instead of 59.whatever. >.

  Thanks to reddit for the answer: Audio Out of Sync and Insert Clip Off By A Frame: first

• Visuals and Audio Out of sync

  Hello

  We try to change some sequences HD, in which case the audio and video are out of sync.

  Plays ok as a MPEG4 file on the hard disk of the computer - problem only occurs when images are imported in the first Pro CS4.  We import via the media browser.

  The problem worsens as he plays for example at the end of a 49 minutes 9 seconds audio offset.

  I read this thread, but it didn't really explain what is the cause...

  http://forums.Adobe.com/thread/436751?TSTART=30

  Here are the specifications of the sequence...

  Path: C:\Users\Administrator\My Videos\Coast10_videomaster\Nora 2 day day 1 Vp1
  Type: MPEG Movie
  File size: 10.8 GB
  Image size: 1440 x 1080
  Sampling: 32
  Frame rate: 25.00
  Audio Format: 48000 Hz - compressed - stereo
  Project Audio Format: 48000 Hz - 32 bit floating point - stereo
  Total time: 00:59:01:08
  Average: 3.1 MB/second
  Format of the pixels: 1.3333

  One wonders about the Audio Source being Format and Format Audio different project for example compressed / comma floating 32 bits?

  Someone suggested to syncronise?  but from what I can tell, it is only useful for multiple clips?

  One of the local film tutors suggests that this is a problem with not having hdv cameras is not a video sync - time and it was the fault of cameras. Apparently the only way to move which was to capture in short clips instead of a jackpot.  Used camera is a Sony V1P.

  Comments are welcome... would be very appreciated!

  Use HDVSplit to capture HDV equipment. It of free, has the scene detection, and avoids the OOS errors.

• Audio out of sync in TV recorded video only.

  
  I have a problem.  I have a Gateway FX7020, tuner Pinnacle PCTV 800i, Nvidia Gforce GTS 250 and, only the recorded tv is out of sync, tv live is fine!  but records are often out of sync... rarely synchronization, as 90% of the cases they are not "."  I save on a second hard drive, but it is faster than the original, I bought with the computer... Yes, all drivers are later, even the audio realtek said that vista was the latest driver but I found a newer version on the site of realtek... :(

  Hello, Tintellaar

  If this started recently, you can try a system restore to when the problem does not occur: System Restore: frequently asked questions

  You can also try installing the latest audio and video drivers directly from the manufacturers Web site, rather than through Windows Update. If you go to your manufacturers support Web site, you should be able to find the drivers for your computer. You install them just as you should install a program.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Video and Audio out of sync after rendering with SOUL

  I went videos of gameplay, with a fable for my microphone and one for the PC-ingamesound. After I visited with Premiere Pro 2015.4 all right.

  But with Media Encoder 2015.4 gameplay video is about 15 frames before the sound. I have an intro to 4 seconds, it is in sync, so I don't understand why the matter of gameplay GET is out of sync.

  When you need more information to help me, let me know.

  Hi Gunther, sorry you have problems with the SOUL.  Looks like the sync is correct when exporting directly from the first, is that correct?  Also, what format you export to SOUL & first?  The problem of synchronization occur even if you export to a different format of the SOUL?  You can try to revive the SOUL with the SHIFT key to reset your preferences, just to verify that the problem is not related to corrupt settings.

  If you agree with the sending of your first sequence and media I could study the problem more away from my hand, let me know and I'll send you a link.

• Audio out of sync with the video

  Hi I am new to animate... so far, I'm having a lot of fun with it. I ran into the first question that I have not been able to overcome.

  I recorded a voice over my my movie in another standard (Studio One) .wav file, the program and imported it into my library. Spent some time the vocal track and animation edition so everything aligns properly Animate. When I test the movie using the game control to animate everything syncs perfectly. When I test using ctrl + enter or publish the movie and play in my browser the audio and video is no longer online. The audio plays at the correct speed, but the video is about 10% faster, then it should be. Is equivalent to 5 seconds in a second animation 45. No idea what I am doing wrong?

  What rate and few sample depth was the WAV? Animate it is 44.1 KHz, 16-bit. If you use 48 kHz or 24-bit, you can run into trouble.

  If you use 44.1 KHz, 15 bits, you make a SWF file or is it HTML5 Canvas? With SWF, you can set the sound synchronization on the Stream, and the graphics and the sound will keep in sync. If it's HTML5 Canvas he uses the event sync, and if your animation is demanding, it will go out of sync.

  There are ways to use Javascript to stay in sync. Something like that in frame 1 of the animation:

  var starttime is createjs. Ticker.getTicks ();

  createjs. Ticker.setfps(25) (24); the 24 would be different if your pace is something else

  this.addEventListener ("tick", movealong);

  var self = this;

  This.Stop ();

  function movealong() {}

  var = now createjs. Ticker.getTicks ();

  self.gotoAndStop (Math.floor (now-starttime));

  }

• Camileo S10 - HD (1080) video and Audio Out of sync

  HI -.

  I'm new here so please, be gentle.

  Curious to know if anyone knows a similar problem for me. I am very happy in general with the quality of the images, photographs and tapes, however, I'm having a major problem. Videos taken with the HD 1080 p resolution are horribly synchronized with the audio (and I mean horribly - about 3-4 seconds to sync) when played on PC.

  It is very good when seen and listened to on the camera LCD screen, but as soon as I watch on PC the sound is ahead of the video.
  Have you tried several methods of game back - that is to say, quicktime, realplayer, Arcsoft and VLC.
  It is of course all the other resolutions, but the entire reason for this was the promise of HD 1080 p.

  I'm doing something wrong?
  Have scoured this site to search and the user manual to see if there are a few essential settings I have missed, but to get anything done.

  Ideas or answers would be much appreciated.

  Hello

  I had the same problem with a film that I created in full HD.
  The problem was that the software didn't supports full HD video audio codec.
  I put the audio in stereo in my reading software (I use the plugin Nero).

  This helped.
  I m not sure if this will also help you but it s worth a try to change some audio settings.
  Also I recommend that you install the codec.

  I use the K-Lite Mega Codec pack
  It contains all the possible and important codecs.

• Audio out of sync after importation. MOV

  Audio issues out-of-sync after you import a clip .mov in Premiere Pro.

  The .mov video the problem doesn't have a problem when played with quicktime or vlc: audio fits perfectly with the video.

  Adobe Premiere Pro 7.2.1 CC (4) on OSX 10.9.1

  Open the first new project... > OK > import the single video clip (either by dragging in the app, or by using the media browser). Start to play the clip in the Source monitor, rub with impatience. Result: audio and video are way out of sync.

  Clip .mov, the origin of the problem has been exported to the Silverback app.  http://silverbackapp.com/

  Details on the clip .mov, via Media Inspector app:

  ============================================================

  General

  Full name: /Users/jukeboxhero/20140203.mov

  Format: MPEG-4

  Profile format: QuickTime

  Codec ID: qt

  File size: 638 MiB

  Duration: 34 min 46 s

  Overall bitrate: 2 566 Kbps

  Encoding date: UTC 2014-02-04 06:52:45

  Marking date: UTC 2014-06-02 15:55:40

  Library: Apple QuickTime

  Video

  ID                               : 2

  Format: AVC

  Format/Info: Advanced Video Codec

  Format profile: [email protected]

  Parameters of the format, CABAC: No.

  Parameters of the format, Reframes: 2 images

  Parameters of the format, GOP: M = 2, N = 30

  Codec ID: avc1

  Identifier of the codec/Info: Advanced Video Coding

  Duration: 34 min 46 s

  Bit rate mode: Variable

  Bitrate: 2 449 Kbps

  Width: 1 920 pixels

  Height: 1 080 pixels

  View picture format: 16:9

  Frame rate mode: Variable

  Rate: 18,969 fps

  Minimum frame rate: 6,522 fps

  Maximum frame rate: 19,355 fps

  Color space: YUV

  The chroma subsampling: 4:2:0

  Color depth: 8 bit

  Scan type: Progressive

  /(pixel*Frame) bits: 0.062

  Stream size: 609 m (95%)

  Language: English

  Encoding date: UTC 2014-02-04 06:52:46

  Marking date: UTC 2014-02-04 15:27:35

  Primaries: BT.709 - 5, BT.1361, IEC 61966-2-4, SMPTE RP177

  Transfer characteristics: BT.709 - 5, BT.1361

  The matrix coefficients: BT.709 - 5, BT.1361, IEC 61966-2-4 709, SMPTE RP177

  Audio

  ID                               : 1

  Format: AAC

  Format/Info: Advanced Audio Codec

  Format profile: LC

  Codec ID: 40

  Duration: 34 min 45s

  Bit rate mode: Constant

  Bit rate: 104 Kbps

  Nominal flow rate: 128 Kbps

  Channels: 2 channels

  Position of the channels: Front: L R

  Sampling frequency: 44.1 KHz

  Compression mode: lossy

  Stream size: 25.9 m (4%)

  Language: English

  Encoding date: UTC 2014-02-04 06:52:45

  Marking date: UTC 2014-02-04 15:27:35

  ============================================================

  The video matter perfectly in Final Cut Pro 10.1.1

  I have Premiere Pro of the trial and the Final Cut Pro trial. If there is no fix or get around easily, I have to give up the first.

  > Frame rate mode: Variable

  No version of first does 'good' with Variable rate

  Below is on iphone, but can help

  Some people find that the Iphone will not edit easily because it uses a variable rate

  -A possible solution in the message #22 http://forums.adobe.com/thread/934466

• Video timecode out of sync after upgrading from CS3 PP PP CC

  Hello!  I hope someone can throw me a Hail Mary here, because I'm wrapping a DVD project in the coming days in order to make a deadline for duplication of disk by Tuesday to have done before I'm driving up to Texas Thursday with hopefully 200 copies of a DVD I have already printed on the disks without content to burn bright disc labels.

  I consider myself as an amateur, but successfully put in place a project to Adobe Premiere Pro CS3 lasting 73 minutes in 2007 with three camera angles and audio of the soundboard.  At the time, I work on the menus of DVD in Encore CS3, but never finished due to many problems over the years.  So now I need for this project, because the band that I shot is back together once more, and they want to do something with it.  Their first show is June 29.

  After update of titles to reflect more MySpace pages and outdated information, when I tried to export to Encore CS3, he kept exporting to approximately 8 to 9 hours and then first Pro would just shut down without explanation.  I lost a few days trying to get this to work, but alas, it wasn't meant to be.

  So given that I just built a new computer with all the cool stuff on it and Windows 7 64-bit, Intel i7 quad core processor, I decided to take the plunge in the creative Adobe cloud, even if I have no idea if this issue with PP, closing no explainable reason would be corrected by the upgrade.  I downloaded first Pro CC and Encore CS6 and open the project file I had on CS3.  I had originally used the Smudger LET police for all securities, which has been is over rated, so my titles were all screwed up.  Not a big deal.

  What is the problem, is that my audio and video files are all out of sync!  I thought it could be fixed by moving the video files to be in harmony with the audio, but that didn't quite do the trick.  I get horizontal lines at the beginning of the clips that prove be a change in the videos usually start times.  Even if I cut out the pieces of the horizontal line and move the video to be synchronized with the audio, changes are all shifted and come at the wrong time.  I don't know even how to explain it properly, but I hope that someone out there understands what is happening.and can tell me how to get things back in sync.

  Here is a screenshot:

  

  How can I tell first Pro CC I want to keep the changes exactly where they are, but adjust to start timecode to 00. 00; 00; instead of 00 00; 01; 41; 15, where the horizonatal lines finally disappear?  I already have over 200 hours invested in this project that I don't want to do it again, especially since I do it does not expect to pay for my efforts.  I'm just a fan of a group and want to share it with other fans of the band.  Essentially, I am donating the DVD and the CD of the show to the band to help raise money to cover the costs of production of a new album.  In addition, the red lines are Pro v3.4 video Neat plugin not yet rendering/preview.

  Thank you in advance!

  Matt

  It shouldn't be a problem.  Many people have multiple versions installed.