Video clips go audio / music instead of the video in Windows moviemaker

Similar Questions

• Play music instead of the ring when your CAD in condition reserved

  Incoming call to a CSQ. An agent is available. The agent's phone started ringing. Change office state loan officer to reserved. However, the caller to listen to music, no ringtone. When the Agent to pick up the phone conversation can start successfully. If the agent is not the phone's microphone in the timeout, call is on hold.

  Music is music on hold. My understanding is that the call ended in a port CTI pending agent picking up the phone. It seems that the ringtone is not transmitted to the appellant. Instead of the CTI port is in Call Hold State and music stream be transmitted to the appellant.

  Someone knows how to get the ring type to the appellant?

  Thank you

  Hello

  When the call is waiting for the response from the officer, the caller hears the Health Ministry set up for the CTI Ports, managed by the IPCC Express.

  I had the same problem at a client and my solution was to configuere the Ministry of health for the Points of road CTI with the ringtone "wav" IPCC Express files.

  You will set up a new source of MoH in Callmanager, create a new pool of device for the Ports of CTI IPCC Express and associate it with this Pool of device to the CTI Ports, or if you prefer, you can set up each CTI Port in the new Department of health.

  Hope this helps,

  Juan Luis

• Pavillion g6: my laptop audio stop working after the installation of window 10

  After the installation of window 10 my speakers to codec audio idt high definition stop working completely.please help me out of the this.thanks

  Try to update the drivers via windows update or hp support assistant. Headphones work?

• Is it possible to use < af:message > to display the validation model adf instead of the default note window

  For any component input, validation that we created at the level of the entities attribute are executed and if any validation fails, the messge is displayed in a window of default note on the component of the.

  Is it possible to use < af:message > to display the validation model adf instead of the window of default note for the corresponding component in a fragemnt jsff page?

  I use JDev 11.1.1.6.0.

  Thank you

  Jean Bayard

  Michelle,

  I have good news. I was able to reproduce, locate and bypass your problem.

  The problem is the following:

  works very well in JSF pages, but it does not work in JSF fragments (which are part of a glued TaskFlow, what is included in a page parent as a ) because ADF when executing a miscalculation of the value of of 'for' - attribute when it is part of a region BTF. For example, suppose that the has id = "it1" (as it is in your JSF fragment above) and this TaskFlow defined in included as a with id = "r1" in a parent page. Then the internal ID of the input text field will be 'r1:0:it1', but at runtime, the framework will set the value of 'for' - attribute to the 'r1:it1' (which is wrong) instead of "r1:0:it1" (which is the correct value).

  You can work around this bug by specifying:

  Instead of

  in your code above. In this way the framework will make up the correct value for the 'for' - attribute at run time and will not work correctly. Don't worry the caveat against a non-existent ID in the JDev source code editor.

  You must do this trick only in fragments JSF and you should not do in JSF pages.

  Dimitar

• How mp3 download files in my folder of music instead of the desktop computer

  I accidentally deleted my downloads folder for now: whenever I have download files, they're going on my desk.
  How can I make them go in my music folder

  Hello

  You try to download the MP3 using Internet Explorer?
   
  If you use Internet Explorer to download music files please perform the below steps to change the location.
   
  You can try the following steps to change default IE9 'Save' the download location.
   
  (a) open Internet Explorer.
  (b) click on the gear icon (Tools) in the upper right, and then click view downloads.
  NOTE: You can also press CTRL + J instead.
  (c) click the Options link.
  (d) click the Browse button.
  (e) look for and select the folder you want to use as the default download location, then click on the button select a folder of internet explore.
  (f) click OK.
  (g) click Close.
   
  If you use a different browser, then whenever you download, you get a dialog box prompting you to run, save or cancel the download. Once you click on save, he tries to save the file in the current default location. You can accept the default location or simply change. If you choose to change the location, then the new location will become the default download location in the future.
   
  Hope this information is useful.

• Missing music files after the upgrade to Windows 10

  Original title: windows media player

  What happened to all my music files I had Windows 7 when upgraded to windows 10?

  Did you do an upgrade on the spot to W10, or did you do a complete new reinstall?

  Makes you backup data before hand?

  If you did an upgrade in Place your music files should still be there. If you did a clean installation from scratch, they will have been removed.

  If you have made a backup before hand (always recommended) or if you have a recent backup, you should be able to restore that. Also, if all goes well, there will be a folder "windows.old" on your PC, which must contain your old music files in folders that they were originally in. Find the folder "windows .old" and navigate in Explorer windows (not IE) to see if you can find them. If you can COPY them to where you want.

• Windows DVD burner will not burn a video of Windows MovieMaker on a DVD-R disc.

  Gives the error "the disk was not burned successfully.  Make sure you have the latest firmware for your CD writer or DVD installed and then try again.  Operating system Windows 7 and be updated on the DVD burner is 2009 with installation.

  Gives the error "the disk was not burned successfully.  Make sure you have the latest firmware for your CD writer or DVD installed and then try again.  Operating system Windows 7 and be updated on the DVD burner is 2009 with installation.

  ========================================
  Have you tried to update the firmware of your DVD burner?
  Check with DVD writer manufacturer support site.

• Audio L &amp; R in the timeline

  I would like my tracks audio L & R of my video clips on 2 mono tracks in the panel mounting instead of being forced into a stereo audio track.

  Is this possible?

  I've got shotgun on L & LAV on R. I would like that they separate in my calendar.

  Sure. Before using one of your images in a sequence, select the clips and go to the Clip > edit > Audio channels. Check the radio button "Mono." That's all there is to it, but you don't have to do this before you use the images in a sequence. You can apply this change to many clips at once.

• How to make my computer send all audio data via an optical audio cable instead of making headphones?

  Howdy,

  To listen to the radio online or CD played from my computer, I used to connect the computer to my entertainment system at home since the headphone jack of the computer to the port on my home entertainment system.

  Now, I wanted to get a better sound and bought the optical audio cable. However, I don't know how to tell my computer to send the audio signal to the system entertainmeny home via digital cable optical, rather than by the headphone. If I just disconnect the cable between the headphone and the port to THE and have only the PC and the system connected with the optical audio cable, I can't hear any sound. I suspect that the computer is not sending the data through the optical audio port. I'm not able to figure out how I can adjust the settings on my computer so that, from now on, all sounds are emitted through the optical audio.

  (1) I want to do it especially for my desktop HP (configuration below) and advice on how to do this would be appreciated.

  (2) I also have a HP laptop (configuration below) and I was wondering if this would be feasible too (even if she does not have an audio output, but it has an HDMI output - you can convert audio optical?)

  Thanks in advance!

  My office is:

  WANT to h8xt,
  • Windows 8 64
  • 3rd generation Intel (r) Core processor quad-core i7-3770 [3.4 GHz, 8 MB of shared cache]
  • 12GB DDR3 1333 MHz SDRAM [3 DIMMS]
  • 1 TB 7200 RPM SATA hard drive
  • No secondary hard drive
  • 1 GB AMD Radeon HD 7570 [DVI, HDMI, DP, VGA adapter]
  • 300W power supply
  • DVD SuperMulti burner
  • LAN wireless-N (1 x 1) card
  • 15-in-1 reader cards, 2 USB 2.0 (front), 2 USB 3.0 (top)
  • No additional desktop software
  • No additional security software
  • No TV Tuner
  • Beats Audio (tm) - a built-in studio quality sound
  • HP USB volume control keyboard and mouse with Win 8 keyboard
  • Adobe Premiere Elements and Photoshop Elements 10

  And the laptop:

  HP ENVY 15t Quad

  Hello @_goma,.

  Welcome to the HP Forums, I hope you enjoy your experience!

  I read your post about how you want to send all the audio data via an optical audio cable instead of the headphone jack of your computer, and I'd be happy to help you in this case!

  To configure your desktop computer to activate the optical audio cable, I advise you to follow the steps below:

  Step 1. Click on the button of the Windows key on your desktop

  Step 2. Type "Control Panel."

  Step 3. Select "Control Panel" in the upper right corner

  Step 4. Select sound

  Step 5. On the Read tab, right click on the white box under available devices

  Step 6. Select "Show disabled" and "show disconnected devices".

  Step 7. Connect your Audio optical cable

  Step 8. Select your cable Audio perspective as the default device, and click 'enable '.

  Because it is not possible to convert the audio output HDMI output on your laptop, it is regrettable that the laptop is not able to connect with an optical audio cable.

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning

• After the upgrade to windows 7 Ultimate I downlosded Microsoft Flight Simulator 2004 and he lights up in low resolution and cannot be used. What can be done to corecct it?

  Cannot run fs9

  herbmah,
  If you still experience this issue, then you should try the following.

  Update your drivers for your video and audio.  Ensure that the manufacturer has Windows 7 drivers for your specific hardware.  You may also look for both motherboard chipset drivers.

  If you still have problems after updating all your drivers, then clean restart your PC and test.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 8 company of the ordinary trial Windows 8

  IM using windows enterprise trial 8. When he arrives at expiry, or during the trial buy windows 8 regular or 8.1 to install instead of the company dear windows 8

  You buy the Windows 8.1 and do a custom during the trial Windows 8 Enterprise installation. Your applications will need to be reinstalled.

  Boot from DVD Windows 8.1

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 8 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• All using windows movie maker, I added audio, but I can't hear the music while playing the video... Why is this?

  All using windows movie maker, I added audio, but I can't hear the music while playing the video... Why is this?

  Hello

  1. What is the format of the video file that you use in Movie Maker?

  2. do you receive error messages when you try to play the video?

  Some audio and video file formats are not supported in Windows Movie Maker and cannot be imported. However, if you have a video or audio file that is not taken care of, you can use a non-Microsoft video editing software to convert the file into a format supported by Windows Movie Maker, and then import the video file or an audio resulting in Windows Movie Maker.

  You can use your favorite search engine and download third-party video editing software to convert the file.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, you can also consult the following articles:

  Problems with importing files into Windows Movie Maker

  Import video, photos and audio on Windows Movie Maker

  Hope this information is useful.

• Export (in the format H.264 HD 720 p 23.976 preset) and audio out separate while the video file is a file instead of .mp4 .m4v

  With the help of the first Pro CC 2014.

  Export (in the format H.264 HD 720 p 23.976 preset) and audio out separate while the video file is a .m4v instead of .mp4 file.

  Anyone know why audio and video export separately? I can't understand why. Help is very appreciated.

  Are you sure that you choose a preset of Blu - ray? This will create separate assets. Thanks for posting a screenshot of your export settings if you can - which is usually much enough quickly

  Thank you

  Jeff Pulera

  Safe Harbor computers

• How to replace the audio clip with each other instead of stack

  I'm editing a long track of narration in Audition, and I have to paste a small audio clip on narrative in several places.  I want the pasted clip to replace this part of the narrative, as it would in first.  What he does in hearing is battery clips, so if I choose narration for some reason, all the clips on the top of the narration are now moved behind her.  To get back them, I now spend the narration to an empty track clip, do the same with those who went behind and everything put back in the correct order.

  Is it possible to have the clip pasted to replace what you paste it above as it would in first?

  Thanks in advance for the help!

  Phillip

  With the help of hearing CC 2015.1 build 8.1.0.162

  No, unfortunately, if you work in multitrack view. An easy insertion function was requested to do exactly what you want but is not yet available.

  The simplest solution is to split the clip to where you want to insert the new plug. You can do this either by using the Razor tool or the shortcut Ctrl-K. Then when you place the new clip on top it will show melted shackled at both ends. If you select one of the parts of the original item, you can click on the edge and drag it to the appropriate end of the new clip (leaving a chained if you wish or not fade).

• Adobe Media Encoder is not looking for additional audio top titles when the video clips to transcoding.

  I have 4 K images with 4 mono audio tracks recorded.  Two of the tracks are dead audio, both are mic on the camera.  I need this audio, synchronize externally recorded in PluralEyes tracks, but that is besides the point.

  When I use SOUL 6.0.2.81 (part of the CS6) to transcode my 4K MOV files in images of 1080 can be used for offline editing, it seems that pick up the first two tracks (dead) and ignore the titles 3 and 4, which contain audio live.

  So far the only solution I found is to put each clip in the first separately.  First recognizes all 4 tracks.  I remove the first two, then export to first to 1080.  It's waaay to strong workforce given the number of shots.

  Any ideas why SOUL would not pick up the two audio tracks?

  Under settings QuickTime Audio, you can try the 'Uncompressed' codec that is multi-channel options?  Then, please use option 'Channel 4 '.  This should export all the four channels.