8 hardware windows BSOD error video error BCCode: 141.

Similar Questions

• "Windows 7 x 64 BSOD error" BCCode: 3B.

  Hey guys. I just started using this new laptop and did a few mines gold intensive CPU with it.

  My laptop in general is idling at 140 degrees F but it seems to hold up. These blue screens seem to happen at random times while botting, usually 6 to 12 hours in it.

  I recently installed Windows 7 Ultimate on this disc have previously windows 8. This laptop really doesn't have a lot of programs too, I just have the basics and use it for heavy agriculture.

  BSOD error

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.1.7600.2.0.0.256.1
  Locale ID: 1033

  More information about the problem:
  BCCode: 3B
  BCP1: 00000000C 0000005
  BCP2: FFFFF960001D07AB
  BCP3: FFFFF8800BFDB1B0
  BCP4: 0000000000000000
  OS version: 6_1_7600
  Service Pack: 0_0

  Product: 256_1

  Thanks for reading

  First step is to upgrade to Service Pack 1.  In itself, that can solve the problem.  If she does not see below

  Service pack 1 update.
  
  http://Windows.Microsoft.com/installwindows7sp1

  Learn how to install Windows 7 Service Pack 1 (SP1)

  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1
  
  Additional resources:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-SP1
  http://Windows.Microsoft.com/troubleshootwindows7sp1

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.

  In other words STOP! If you don't know what it means that you're probably not  

  
  

  
  

  1-Driver Verifier (for full instructions, see our wiki here)

  
  2-Memtest. (You can learn more about running memtest here)

• Windows BSOD error

  Hello

  These days I often BSOD error ' DRIVER_IRQL_NOT LESS OR EQUAL (tcpip.sys) and even I am unable to copy or zip the dump file, it saying: access denied.»

  Please help me

  Hello

  To help you, we will need for the. DMP files to analyze what exactly happened at the time of the accident, etc.

  If you do not know where. The DMP files, here's how to get to them are:

  1. go to the folder % systemroot%\Minidump.

  2 copy all the DMP files in the Minidump folder on your desktop and zip then those files.

  -If she always says that you have not the permission, you must Take Ownership- http://www.eightforums.com/tutorials/2814-take-ownership-add-context-menu-Windows-8-a.html

  3. download the zip containing the. Files DMP Onedrive or a Web hosting of your choice and paste it in your answer. Favorite sites: Onedrive, Mediafire, Dropbox, etc.. Anything with waiting-timers.

  4 (optional): The type of. DMP files in the Minidump folder are known as small images of memory. In any % there will be what we call a kernel image (if your system is configured to generate). It is labeled MEMORY. DMP. The difference between the small images of memory and core-dumps in the simplest definition is that a kernel image contains much more information at the time of the accident, which allows more debugging of your question. If your upload speed and you're not going against any strict caps bandwidth and/or use, etc., the kernel image is the best choice. Note that the core-dumps are much larger in size due to containing much more information, that's why I mentioned the download speed, etc..

  If you plan to use Onedrive but don't know how to download it, please see the following:

  Download pictures and files to Onedrive.

  Please note that all programs "cleaner" such as TuneUp Utilities, CCleaner, etc., default will remove. DMP files after use.

  If your computer does. DMP files, follow these steps:

  1. start > type systemroot which should show the Windows folder, click it. Once inside this folder, make sure there is a Minidump folder created. If not, CTRL-SHIFT-N to create a new folder and name it Minidump.

  2 Windows key + Pause key. This should appear in the system. Click Advanced on the left system settings > advanced > performance > settings > advanced > make sure there is a check mark for "manage automatically the size of pagefile for all readers."

  3 Windows key + Pause key. This should appear in the system. Click Advanced on the left system settings > advanced > startup and Recovery > settings > system > ensure there is a check mark next to "write an event to the system log.

  Make sure Small Memory Dump is selected and ensure that the path is % systemroot%\Minidump.

  4. ensure that viewers is ENABLED:

  Start > Search > type services.msc > on the name tab, search for Windows Error Reporting Service > if the service status is not started, then right-click and select start. Also to ensure that, under Startup Type set to automatic rather than manual. You can do this by right click, select properties and under general selection on 'Automatic' startup type and then click on apply.

  If you can not get into normal mode to do this, please do so via Safe Mode.

  Kind regards

  Patrick

  Thank you very much for your help...

  I found the reason why is because of Anti-Malware software and I uninstalled that. All is well now

• Windows BSOD error 8

  WHEA_UNCORRECTABLE_ERROR (124)
  A fatal hardware error has occurred. Parameter 1 identifies the type of error
  source that reported the error. Parameter 2 holds the address of the
  WHEA_ERROR_RECORD structure that describes the error conditon.
  Arguments:
  Arg1: 0000000000000000, Machine Check Exception
  Arg2: fffffa80059cb028, Address of the WHEA_ERROR_RECORD structure.
  Arg3: 00000000b2000000, High order 32-bits of the MCi_STATUS value.
  Arg4: 0000000000010019, Low order 32-bits of the MCi_STATUS value.
  
  Debugging Details:
  ------------------
  
  TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
  
  BUGCHECK_STR:  0x124_GenuineIntel
  
  CUSTOMER_CRASH_COUNT:  1
  
  DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
  
  PROCESS_NAME:  chrome.exe
  
  CURRENT_IRQL:  f
  
  STACK_TEXT:
  fffff880`0148b868 fffff802`31e3e965 : 00000000`00000124 00000000`00000000 fffffa80`059cb028 00000000`b2000000 : nt!KeBugCheckEx
  fffff880`0148b870 fffff802`31fddeb3 : 00000000`00000001 fffffa80`042a7850 00000000`00000000 fffffa80`059cb028 : hal!HalBugCheckSystem+0xf9
  fffff880`0148b8b0 fffff802`31e3e703 : 00000000`00000728 00000000`00000003 fffff880`0148ba10 fffffa80`042a7850 : nt!WheaReportHwError+0x253
  fffff880`0148b910 fffff802`31e3e020 : 00000000`00000010 fffffa80`042a7850 fffff880`0148bac8 fffffa80`042a7850 : hal!HalpMcaReportError+0x53
  fffff880`0148ba70 fffff802`31e3df1b : fffffa80`0435fd50 00000000`00000001 00000000`00000003 00000000`00000000 : hal!HalpMceHandlerCore+0xd4
  fffff880`0148bac0 fffff802`31e3dd78 : 00000000`00000004 00000000`00000001 00000000`00000000 00000000`00000000 : hal!HalpMceHandler+0xe3
  fffff880`0148bb00 fffff802`31e3ef0f : fffffa80`0435fd50 fffff880`0148bd30 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0xd4
  fffff880`0148bb30 fffff802`31ed577b : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalHandleMcheck+0x40
  fffff880`0148bb60 fffff802`31ed552e : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxMcheckAbort+0x7b
  fffff880`0148bca0 00000000`647109db : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiMcheckAbort+0x16e
  00000000`0727ede0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x647109db
  
  STACK_COMMAND:  kb
  
  FOLLOWUP_NAME:  MachineOwner
  
  MODULE_NAME: GenuineIntel
  
  IMAGE_NAME:  GenuineIntel
  
  DEBUG_FLR_IMAGE_TIMESTAMP:  0
  
  FAILURE_BUCKET_ID:  X64_0x124_GenuineIntel_PROCESSOR_TLB
  
  BUCKET_ID:  X64_0x124_GenuineIntel_PROCESSOR_TLB
  
  Followup: MachineOwner
  

  SR

  This is called a BCC124 and is linked to the material.  Since "genuine Intel" is referenced in your, I would run a cpu stress test.

  

  Try this free stress test: http://www.mersenne.org/freesoft/

  Prime95 Setup program;
  -Extract the contents of the zip file into a directory of your choice
  -Double-click on the executable file
  -Select "all stress testing.
  -Select the test of 'Blend '.  If you have already run MemTest overnight, you can run the test of "Small FFFS" instead.
  "Number of threads of torture test run" must equal the number of processors multiplied by 2 (if you use hyperthreading).
  The best way to do this is to go to the Manager of the tasks of the figure... The performance tab - and see the number of boxes that appear under the CPU usage history
  Then run the test of 6 to 24 hours - or until you get errors [b](whichever comes first)
  The selection of Test and the file stress.txt box describes the components that insists on the program.

  Stop 0 x 124 is a hardware error

  If you are overclocking try to reset your settings to standard processor and see if that helps.

  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:
  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.
  

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.
  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).
  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.
  (4) update the BIOS of your motherboard according to the manufacturer's instructions and clear CMOS.
  Their website should provide detailed instructions on the brand and model-specific procedure.
  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.
  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use the 3 rd-party memtest86 utility to run several hours a test value. (6-8 passes to stress the ram)
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.

  
  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:
  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.
  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

  
  
  More advanced reading can be found here from a MS MVP IT PRO
  http://captaindbg.com/bug-check-0x124-whea_uncorrectable_error-how-to-troubleshoot/

• BSOD error "" BCCode: 3B ""

  BCCode: 3B
  BCP1: 00000000C 0000005
  BCP2: FFFFF9600012F2EB
  BCP3: FFFFF880069073A0
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  System
  Processor: amd athlon 64 x 2 4400 +
  GPU: nvidia 9400gt
  RAM: ddr2 samsung

  You have done, thank you!

  All attached files of the DMP are bug check SYSTEM_SERVICE_EXCEPTION (3B).

  This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  
  This error has been linked to the excessive use of expanded memory and resulting from user mode graphics drivers enjambment and passing data incorrect of the kernel code.

  If we take a look at the call stack:
  
  1: kd > kv
  Child-SP RetAddr: Args to child: call Site
  fffff880 '07ef7ad8 fffff800' 028d5be9: 00000000' 0000003b 00000000' c0000005 fffff960 '0014f2eb fffff880' 07ef83a0: nt! KeBugCheckEx
  "fffff880 '07ef7ae0 fffff800' 028d553c: 00000000 ' 00000001 fffff880 ' 07ef7d50 fffffa80 '03a512d0 fffff880' 0175cd1e: nt! KiBugCheckDispatch + 0 x 69
  fffff880 '07ef7c20 fffff800' 02901f6d: fffff960 ' 00306a 04 fffff960 ' 002 d 1644 fffff960' 00020000 fffff880 ' 07ef8b48: nt! KiSystemServiceHandler + 0x7c
  fffff880'07ef7c60 fffff800'02900 d 45: fffff800'02a1d788 fffff880 '07ef7cd8 fffff880' 07ef8b48 fffff800'02856000: nt! RtlpExecuteHandlerForException + 0xd
  "fffff880 '07ef7c90 fffff800' 02911dc1: fffff880 '07ef8b48 fffff880' 07ef83a0 fffff880 ' fffff900 00000000 ' c0630ca0: nt! RtlDispatchException + 0 x 415
  fffff880 '07ef8370 fffff800' 028d5cc2: fffff880'07ef8b48 fffff900 'c0625320 fffff880' 07ef8bf0 00000000' 00000000: nt! KiDispatchException + 0 x 135
  fffff880 '07ef8a10 fffff800' 028d483a: fffff900 00000000'00000001 00000000'00000008 00000000'00000000 ' c0625320: nt! KiExceptionDispatch + 0xc2
  fffff880 '07ef8bf0 fffff960' 0014f2eb: fffff900 ' c0625320 fffff900 'c020cd38 fffff900' c1ef5630 fffff960 ' 000e4712: nt! KiPageFault + 0x23a (TrapFrame @ fffff880'07ef8bf0)
  "" fffff880 '07ef8d80 fffff960' 0014f690: 00000000 ' 00000000 fffff900 ' c0630ca0 00000000 ' 1201088 d fffff900 ' c0625320: win32k! xxxSendMenuDrawItemMessage + 0 x 253
  fffff880 '07ef8e80 fffff960' 00150ca 8: fffff900'c0630ca0 00000000'00000000 00000000'00000000 00000000'00000000: win32k! xxxDrawMenuItem + 0x1a8
  fffff880 '07ef8f40 fffff960' 00151b2d: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: win32k! xxxMenuDraw + 0 x 294
  fffff880 '07ef8ff0 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: win32k! xxxPaintMenuBar + 0xf1

  ^^ We have different routines before win32k.sys Windows through its error handling, etc. for the bug control itself.
  
  If we run a ln on the 2nd parameter of the verification of bug:

  1: kd > fffff9600014f2eb ln
  (fffff960'0014f098)   win32k! xxxSendMenuDrawItemMessage + 0 x 253 |  (fffff960'0014f34c) win32k! xxxSendUAHMenuMessage

  ^^ The exception occurred in win32k! xxxSendMenuDrawItemMessage + 0 x 253.

  -Nom_processus: Project64.exe

  All accidents occurred when PJ64 was running. What version are you using (the most recent is 2.x.x etc... AS FAR AS I KNOW). If you are, try 1.6 instead, or if you're running 1.6, try 2.x.x (later). In addition, it is perhaps a video driver issue.

  ------------------

  1 make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already experienced with the driver of the card later and earlier versions, please try the driver beta for your card.

  2. don't use PJ64 for awhile and see if the crashes stop. If they do, PJ64 is the question and you will need to understand why (plugin possible licensing, etc.).

  Kind regards

  Patrick

• C4 Windows BSOD error 7

  My Dell Inspiron periodically stop with BSOD - C4 error 0 x 0000000000000062, 0xfffff1800f4ef410, 0xfffffa800bf8c520, ox0000000000000001 (this is the last error) saying that a driver has been stopped as a result of the system of. I have not installed new hardware or software in months. All devices, except the mouse, are turned off. Update Dell says all drivers are up-to-date and not reported hardware problems.

  This occurs when the system is idle. Norton360 could do the background process, but I don't know.

  Any ideas?

  Carolyn

  WARNING: Unable to verify timestamp for IDSvia64.sys<==>
  ERROR: Module load completed but symbols can be loaded for IDSvia64.sys
  Probably caused by: IDSvia64.sys

  This accident was caused by your Norton AV.  Please uninstall and install MSE (Microsoft Security Essentials) or another AV of your choice.

  Download and run the Norton removal tool.

  https://support.Norton.com/SP/en/us/home/current/solutions/v60392881_EndUserProfile_en_us

  Microsoft Security Essentials

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

  Note: Check and make sure, that check has been reset.

• Windows BSOD error 8 "Bad Pool Caller."

  Original title: Windows 8 BSOD

  Dear Windows people

  I got the dreaded Blue Screen of Death on my laptop Acer Aspire E1 - 750 cheap but good mood who gave error code 'Bad Pool Header', then 'Bad Pool Caller'. He couldn't get past this screen at start up. Using Windows 8.0, no devices (in fact, I was trying to plug a Kobo in the USB port, and does not recognize him, he was charging, led me to restart the laptop, to achieve the above error messages.

  Very surprised because it is relatively new, and the previous Amilo (Windows XP) I had, had 8 years of operation without BSOD.

  The files don't the zip.

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  We prefer at least 2 DMP files to track trends and to confirm the cause.

  
  

  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask

• 8 windows multiple BSOD errors

  I had a HARD drive on my system to Windows 7. I wanted to install a SSD and move to Windows 8. I bought a Samsung EVO 250 GB Solid State Drive and have had any other problems with Windows 8. I can still update Windows without having a BSOD. Here is a list of the BSOD errors I received in 24 hours:

  PAGE_FAULT_IN_NONPAGED_AREA (Ntfs.sys) (fltmgr.sys)

  DRIVER_IRQL_NOT_LESS_OR_EQUAL (dxgmms1.sys) (nvlddmkm.sys)

  System_service_exception (no data) (nvlddmkm.sys)

  Each parenthesis is a different phenomenon and there are many others. I don't know if it's my real SSD which is a failure or if the controller is not compatible with Windows 8, or if any other piece of hardware is not. I tried updating, deleting, adding updates, firmware and drivers and nothing is.

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.

  * Zip up the copy (compress)

  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  Link to find out how to download below.

  http://www.WikiHow.com/use-SkyDrive

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.

  * On the Advanced tab, click Startup and recovery... Settings button.

  * Make sure that automatically restart is unchecked.

  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).

  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.

  * OK your way out.

  * Reboot if changes have been made.

  Please also run MSinfo32 and download the output as well.

  To run MSinfo32 please go to start > run > MSinfo32

  Go to 'file', 'save' and download the PDF is saved with the DMP

  System specs are extremely useful then please include everything you know.

  
  

  Blue screen view and that crashed are often wrong and should only be used in case of emergency...
  
  
  You can learn more about BSOD here
  You will learn how to test your memory here 
  An effective question gets help more quick read how here

• Data execution prevention-window Explorer error when I try to access the windows Explorer, and more particularly when I try to watch videos.

  Original title: data execution prevention-window Explorer error

  Data execution prevention launches when I try to access the windows Explorer, and more particularly when I try to watch videos. So I tried to turn off DEP for windows Explorer. Now, I can access my videos, but they all have text on them that says video PHOTO, & www.jpg.com. I have not downloaded new software recently, so I don't know where it comes from. I ran my antivirus sofware and malwarebytes, and my system is to come clean. How can I remove this from my videos? Thank you!

  This isn't how to diagnose and repair the DEP errors - especially not Windows Explorer DEP errors.

  But 6 days of inactivity and a link to an article of a MSE = automatic response.

• BSOD error 1033 whenever I play Diablo 3

  Hello

  I met a BSOD error 1033 recently, every time I play Diablo 3. The game starts up and crashes the minutes a bit and my computer restarts automatically. Most of the time, I have to restart a couple of times before that my computer can even switch to secure mode.

  Here is more information about the error. I don't know how to post the 2 files mentioned below in this forum and would appreciate any help as walked me.

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033

  More information about the problem:
  BCCode: 116
  BCP1: 8634 008
  BCP2: 93984C7A
  BCP3: C000009A
  BCP4: 00000004
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\101613-22713-01.dmp
  C:\Users\Jarren\AppData\Local\Temp\WER-38298-0.SysData.XML

  Thank you for your help.

  JT

  99% of the time error 116 comes from heat.  If yours is a laptop that is almost certainly.  It isn't RAM (although it can be the video ram), it could also be power.

  Update for win 7 64 bit will not solve this

• Media Playe window C0011B1 error

  How can I fix error C0011B1?

  Hi Enriquerecalde,

  1. when exactly you receive the error code?

  2. What is the full error message that you receive?

  3. This occurs when you try to read a specific file format?

  4. what version of Windows Media Player do you use?

  5. have you made a recent software or hardware changes to the system?

  You can try to start Windows media Fixit from following link player and check if it helps:

  Solve the problems of Windows Media Player video and other media or library

• Watch DRIVER BSOD error - STATE-FAILURE of CURRENT

  Hi, I have Windows 8 in HP Pavilion G6. Problem and a large number of errors are occurring in my laptop. I have refreshed, restored, reset and re-installed my Windows several times. Most of the problems occurred in the Bluetooth driver. Every time after that resetting or refreshing, Bluetooth my work for 2-3 days and then she also stops working. Also scanned my system with Norton internet security and Microsoft Windows Defender and Third-software No. third are installed in my system. Can someone help me with this problem? I downloaded the Minidump files on SkyDrive ( https://onedrive.live.com/redir?resid=22D347B8F78B247D%21167 ) caused due to the blue screen (BSOD error shows PILOT - STATE-FAILURE of CURRENT)

  Original title: blue screen of death in Windows 8

  9F error checking, {4, 12 c, fffffa8007b4e200, fffff8015e8a8780}

  WARNING: Unable to verify timestamp for win32k.sys
  ERROR: Module load completed but symbols can be loaded for win32k.sys
  Probably caused by: memory_corruption

  DRIVER_POWER_STATE_FAILURE (9f)
  A driver is causing an inconsistent power state.
  Arguments:
  Arg1: 0000000000000004, the change in diet has expired waiting to synchronize with the Pnp
  subsystem.
  Arg2: 000000000000012c, the time-out in seconds.
  Arg3: fffffa8007b4e200, the thread that currently holds the lock of Pnp.
  Arg4: fffff8015e8a8780

  Bug Check 0x9F: DRIVER_POWER_STATE_FAILURE.

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff559329 (v = vs. 85) .aspx

  Resolution error blue screen in Windows.

  http://Windows.Microsoft.com/en-us/Windows-8/resolve-Windows-blue-screen-errors

  Uninstall Norton and turn on Windows Defender.

  Norton Removal Tool.

  https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us

  How to turn Windows Defender real-time Protection on or off in Windows 8 and 8.1.

  http://www.eightforums.com/tutorials/21967-Windows-Defender-protection-turn-off-Windows-8-a.html

  Uninstall and reinstall all the network drivers, including Bluetooth.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=us&DLC=en&sw_lang=&product=5189545#n617

  Note: Please confirm that the model in the above link is yours, before continuing.

  In addition,

  Please download a copy of your system information file. Click 'Start' , type "msinfo32" , click on "file" at the top of the page, select "Export" and enter a name for the file and click 'Save'. " Navigate to the file and download the text file generated in a public folder on your onedrive and post the link here.

• Apple Hardware Test reports error message

  If you want history, scroll to the bottom. Here's the short version: Apple Hardware Test indicates error 4SNS/1/40000001:VeAS-0.000

  This page handy tells my that '4SNS' = a sensor problem. 'V' indicates that it is a voltage sensor; and 'e' is short for PCIe. There is nothing on AS - 0, 000 but I'll allow myself that it could indicate the location PCIe 0, i.e. the bottom, 16 channels gpu 'main' slot. If anyone can confirm or correct this assumption, that would be sweet.

  Most important: how serious a mistake it is? I have a Radeon HD 7970 GHz 3 GB edition. I'm he put at risk by continuing to use it? I plan to play a lot more, some on El Capitan, but more on Windows, where I can experiment with overclocking my already factory overclocked GPU. It doesn't seem to be a problem in terms of overclocking software is. Reports of tension, times and speeds of fan exactly as expected.

  And the main reason I upgraded from my great MacPro1 OG, 1 to a 4.1 is because I intend to upgrade GHz W3520 2.66 in the 4.1 to a 3.46 GHz W3690. With the upgrade of the processor, I had planned to keep this box for several years. This error indicates that this particular Mac Pro is less great, or maybe even a lemon?

  The seller is apologetic and will accept a return. Which will cost me $40. I would stay there or is it really not a problem. It was really a lot...

  As you stock up on for Apple hardware Test error messages are very cryptic and not really documented.

  I don't know of anyway to know if it's a "fatal" flaw

• HP dv7-1285dx Win7 BSOD errors

  My dv7-1285dx worked perfectly until a few weeks before, now he wants bsod on me at least every other day, sometimes twice a day or more. Various bsod error messages (STOP, IRQ, etc.). No indication of something. At one point last week, I had to use the restore application to return two registry saved back to just run - before that it would not boot.

  Error with nvlddmkm.sys are related to driver Nvidia but that only happened once. The last was something with a pilot and an IRQL is not an error (I'll follow upward with more detailed messages on this subject when they occur - sorry to be vague).

  I have run all equipment, disc tests and memory that are included in the suite of Win7 and run standalone versions similarly people to Acronis. Nothing seems abnormal. I hope that someone can read these dmp files and tell me if something stands out.

  Here is the link to the dmp files: http://www.mediafire.com/rsattler

  Thank you!

  Problem solved by replacing SoDIMM defective.

  Tests with Memtest86 + was very helpful in tracking down the memory defective barrette. I ran the test 4 times to determine which module was the absence of ata and eliminate any hardware problem module slot;

  1. 4 GB SoDIMM in slot 0
  2. 4 GB SoDIMM in slot 1
  3. 2 Gb SoDIMM in slot 0
  4. 2 Gb SoDIMM in slot 1

  I ran each test for ~ hour or two. I thought that I had a problem with the 4 GB SoDIMM but it turned out that the 2 Gb SoDIMM was the culprit with this testing methodology.

  Replaced the 2 GB SoDIMM and revived the test overnight (~ 10 hours) with two SODIMM modules in the machine and found no errors.

• Need solution for details of error below:-blue screen error BCCode 1000008e + BCP1:80000003 + BCP2:817855 A 8 + BCP3:8B9B9A54 + BCP4:00000000 + OS version: 6_0_6001

  get this problem in win 2 k 8 32-bit enterprose

  Need solution for the details of the error below: -.
  Blue screen error BCCode 1000008e + BCP1:80000003 + BCP2:817855 A 8 + BCP3:8B9B9A54 + BCP4:00000000 + OS version: 6_0_6001

  Hi SudhaArunachalam,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server forum.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/