video introduction to stand alone

Similar Questions

• RedHat 5 video failure using stand-alone converter

  I'm running a 64-bit Redhat Enterprise Server and P2V trying it.

  Converter using Stand Alone Client 4.01. Build 161434

  Server ESXi Version 4.1.0

  She will run and do not reach 1% with the "FAILED: methodfault.summary" error.

  On the server, it registered the fault as:

  Warning message on RedHat: insufficient video RAM. The maximum resolution of the virtual

  machine will be limited to 1176 x 885. To use the configured maximum resolution of 2560 x 1600,

  increase the amount of video memory allocated to this virtual machine by setting svga.vramSize = "16384000"

  in the virtual machine configuration file. WARNING 11/29/2012 14:30:08 RedHat root

  When this does not work it will remove the virutal machine and there is no file settings to update.

  Any ideas how to make this work?

  Thank you!

  If you have a Windows machine, you can try to use the converter 5.0.1.

• BlackBerry Smartphones stand-alone mode

  Is there a stand-alone for the BlackBerry 8330 mode so I can listen to music or play video games while plane?  It allows the unit to be on, but calls or e-mails aren't coming through.

  Welcome to the forums.

  Yes, you can simply turn off the wireless.  Click on icon to manage the connections, then click on disable all connections.

  When you land, go back and click on enable all connections on.

• With the help of Muse in a stand alone Kiosk

  I said a project where I would use Muse as the application to operate a stand alone Kiosk. Pretty simple, 5 buttons launch 5 video pages. What should I do for the reading of the project directly from the computer without internet connection?

  Any help would be appreciated.

  Thank you

  Bob

  You must also host videos if not on an internet connection. Hover video widget Pro which will allow and gites hosts the video in your current folder.

  Here is a link to check it out.

  www.doodadle.com/Hover-Video-Pro.html

• Using a stand-alone WebLogic Server instance - ADF Insider issue

  Hello
  
  I just watched the [use a stand-alone WebLogic Server instance - ADF Insider | http://www.youtube.com/watch?v=yGSR6dwd3nw] video and I gave a try installing the WLS in my dev machine.
  
  Unfortunately I can't see how to do a run/debug jspx page right click in the WLS newly installed and configured.
  
  Note that the wizard will create a server connection Application under the radio button in the built-in Server displays "a built-in server can be started and stopped by JDeveloper. That applications can be deployed automatically to the server with the command run or Debug ... "but running a jspx always begin it pre-configured"IntegretedWebLogicServer"and there is no option to choose where to run from nor I see any configuration in the project properties.
  
  Could you please give me the missing indication?
  
  Yiannis

  Hello.

  First of all, thanks for watching the video. To specify the server of an application will run on, simply open the application properties and go the the Run category. Then select the appropriate drop down list WLS forum link to the built-in application server .

  Best regards

  Frédéric.

• Flash stand alone player .flv.

  Dear members:
  
  I recently downloaded files .flv from the Internet and tried to view them without success. I installed in my computer the suite CS3 premium that includes Flash CS3 so I was surprised that the videos would not play. Right-click on these files, I have the choice to open them using the Flash Player.app (1), which is selected as default and also (2) Adobe Flash CS3.app, (3) Flash MX 2004 and SAFlashPlayer (4). In fact, none of these apps plays videos. When I select the Flash Player.app and SAFlashPlayer application load and they appear the menu bar of Mac OS x, but nothing happens.
  
  Please forgive me if this is a basic question, but I was not able to locate a stand-alone version of Flash Player for download on the Adobe web site. One that I found seems to be one installed in browsers so that they can play Flash media.
  
  Where can I find and download the stand alone Flash Player?
  
  Thanks in advance for your help.
  
  Joseph Chamberlain

  Hello, fredingston.

  After that I placed my original message, I found a plug-in to QuickTime that allows playing Flash videos. The name is Perian and did a very good job. A practical solution for those with Macs.

  Thank you second post I was able to find and download the new Adobe Media Player and really liked. The interface is pretty cool and I think it has more features that I haven't had the chance to explore (it seems more than just a simple player).

  I noticed that in Adobe Media Player, the videos seem to play with a better quality, then this will certainly become my default player for Flash media in the future.

  Thanks again for your reply and useful responses to my questions.

  Best regards

  Joseph

• I need the Java Player for firefox on a stand-alone computer without internet access. I have internet access on another computer. How can I do this?

  I have a stand-alone computer (no internet access) with firefox to run the Java Player. I have internet access on another computer in order to download files and hover over things to the stand-alone computer to install. That do and where can I download and how I install on the stand-alone computer.

  Thank you

  Leroy

  Hi, to get the Offline Installer that you can use on the computer without internet access, please visit https://java.com/en/download/help/windows_offline_download.xml

• How can I get Web sites to open in the stand-alone windows instead of all stacked in a single window?

  If I have a window open and click a link to open another, they pile up in one window instead of opening a new stand-alone window. How can I change this?

  Open options
  Tabs
  Top box uncheck the box which

• How to record a loop of garageband as a stand alone on my ipad pro?

  Once I recorded a song, I want to save it as a file of music stand alone and keep it on my iPad pro. How do I do that?

  If I try to export to iTunes, it is not found in my music application.

  Hi Marco_Polo,

  Thank you for using communities Support from Apple.

  I see you want to record a song that you created in GarageBand on your iPad.  I don't know what application you are trying to save it to, or if it is a ring, then I suggest that you look through the information provided in the link below for your different sharing options.

  Sharing GarageBand songs

  Have a good.

• I need to stop a download of the query, I thought a stand-alone application but turns require a higher level (FCPX) as a 'parent' and I do not who have, or want to buy.

  I need to stop a download of the query, that I thought a stand-alone application but turns require a higher level (FCPX) as a 'parent' and I do not have that, or I want to buy it.

  Motion IS a stand-alone application. It is mainly designed to make effects for Final Cut Pro X, but it is not necessary to have with FCPX nor is it necessary to have FCPX to create projects for other purposes. When you open the query, simply select project of work outside the FCPX motion. You can save regular projects of Motion anywhere on your system.

• Problems with MAX tasks on different stand-alone

  Hallo!

  I have problems with my MAX-tasks and my V12 Dasylab on different stand-alone.

  I have 3 devices on the first PC.

  OR USB-6009 dev1

  NEITHER USB-6210 dev2

  NEITHER USB-6501 dev3

  Now, I had programmed a file Dasylab which uses the device 2 and device 3. Everythink worked fine. I exported my MAX configuration for unit 2 and unit 3 and imported on the second PC. But that Dasylab was not able to find the right tasks for my program on the second PC, even if MAX everythink that went well. The only solution was to delete all tasks and create them again. But then I tried to open the program stored on my first PC again and I had the same problem, Dasylab was not able to find the right tasks, only solution was to remove the stains and create them again. I tried to reset the configuration of my Dasylab with the "Synchronize with MAX-configuration" option, but it wasn't succsessful. DASYLab gave an errormessage, not mentioning not what exactly is the problem.

  Can anyone help?

  Thank you very much and have a nice day.

  Hilby

  Hallo Hilby,

  I think it can be more that can be solved on the Forum of NOR. I think you should contact your local dealer and ask for help directly.

• Stand-alone application with LabView 7.0 get error cannot find DAQmx clear task.vi

  I tried to create a stand alone vi with the Build Application or shared Library (dll) in LabVeiw 7.0

  When I put it on another PC to test it I get the error "cannot find DAQmx clear task.vi.

  the other PC also has 7.0 and 8.1 DAQmx Labview.

  I think my problem is in the source tab, where you are supposed to add dynamic vi and support, I have search the forums and database of nor and have not found a solution.

  Hi LabTech09,

  When you run the executable file on the other computer, that's when you get this error?  You have the same exact versions of DAQmx and LabVIEW on both computers?  Is the dialog box allow you to navigate to the clear task.vi DAQmx?  If so, you can find these screws in C:\Program NIUninstaller Instruments\LabVIEW 7.0\vi.lib\DAQmx\configure\task.llb.  The executable runs on the development computer (the machine, it was compiled on)?

• Stand-alone labview application (.exe file) does not run correctly

  Hi all

  I'm doing a labview application only to run on another computer (I never did this before).

  I went through the tools-> build application prompts and was able to build an exe file.

  the program is supposed to control a power meter and measures of power, then save them in a text file.

  When I run the exe, on the same computer, I compiled the exe, the program generates a text file to save data to, but he cannot communicate with the electricity meter.

  There are a few screws Sub and a dll file that are used to communicate with the electricity meter. Would it be possible that I am not say labview to correctly

  include these files when I create an executable?

  What are some common problems that arise when building stand alone applications that could be cause of my problems?

  And no one knows of any good tutorials on building applications stand alone in labview, other than the help files OR?

  Thanks for your help,

  Also, if you used the VISA, include the runtime with your Installer.

• binary and generations of stand alone files

  Hello: I have an application that is running in 2014 of LabView which creates and reads several tables 3D (25 X 8 X 6) to and from binary files. Works very well in the development environment. Problem is that now I need to create a (stand-alone) version for the client. Binary file functions do not seem to work. Any help or advice would be apprciated.

  Yes, a very common error is to save files with a path relative to the VI that saves the file. A more portable solution for no-LabVIEW files is to define paths to compared to the output of the function of the Application directory.

  In the development environment, it returns the path where the project file. In the executable file it returns the path where the executable.

  Mike...

• cRIO stand alone running

  Hello world

  I am beginner in LabVIEW and LabVIEW FPGA and RT. student internship that I work this month on FPGA project and my goal is to schedule a stand-alone on cRIO application.

  I got a CompactRIO 9002 with an AIO 9215 analog input module and use LabVIEW 13. This cRIO Gets an ethernet and a RS323 port.

  My request is to:-code FPGA by ethernet

  -acquire a signal input of the NI 9215 module

  -Send the data measured on a device (first on hyperterminal on PC and on an SD card or a storage device) by the port COM (RS232)

  My development was to: 1. create a new FPGA project

  2 code for the target FPGA vi and compile (InOut.vi)

  3 code another vi to run the cRIO from my computer (OpenCloseFPGA)

  At this stage, everything goes well and works and I followed the signal measured on OpenCloseFPGA.vi and my Pc Hyperterminal.

  Can I track this topic 'http://zone.ni.com/reference/en-XX/help/370622L-01/lvrthowto/rt_building_rt_app/' on the creation and deployment of a stand-alone application in real time. But my RT generated and deployed application nothing happens. I followed other tutorials on standalone RT but I still stuck...

  Could someone give me any tips or tutorials to help me?

  I found the solution, there is a mismatch and a mistake in my project.

  First, I use a cRIO 9002 and in building'step to unplugging it SSE2 option in "Advanced dialog box.

  See this topic.

  The second was a mistake from myself, I give an ethernet address to RT host that cannot run in a standalone application (wireless).

  Thank you for all your help.