Videos stop at 0:00

Videos YouTube, vimeo videos, and all the videos which is not played through flash will be down to 0:00. The first frame of the video to load and I can rub through it to load an image to a timestamp, but will not play the video. QuickTime has the same behavior for local files, but VLC works. I tried to use Safari, Chrome, and FireFox, but they have this problem. I went incognito-private, I have cleared all caches on browsers, and I restarted my computer a bunch of times. I even created another user account on my mac, but the problem was there for them too. The strange thing is this problem just popped up. When I came to my computer, I had no such problem. Someone has an idea what could be the cause?

Try to start in SafeMode (boot with the SHIFT key down)

Try safe mode if your Mac does not end commissioning - Apple Support

Tags: Mac OS & System Software

Similar Questions

  • Any REFLEX Cannon is 29 min video stop and don't work with cards sdxc fornat Exfat No 4 GB

    Any REFLEX Cannon is 29 min video stop and don't work with cards sdxc fornat Exfat no limit 4 GB?

    For the VIDEO?

    Thank you

    Almost all of the Canon 'Vixia' line of cams are less than 1 k $. The Vixia HF G30 $1150 and it is the only model over $1 k.  Here are all the models to consumer prices.  (X XAnn, XFnnn, & XCnn series is top of the line, and of course the EOS film bodies are much more expensive.)

    As far as I know, they all supports SDXC cards.

  • You Tube, after that 11 seconds the video stops, in all and is no sound through the speakers. No noise in the music of cd too

    For example: in You Tube, after 11 seconds the video stops, in all and is no sound through the speakers. No noise in the music of cd too.

    If you get no audio cd, youtube or anything else, you must first check in the volume control that you are using the sound card, you are connected, that nothing is on mute and volume is sufficient, or install the drivers for your sound card.

    Video YouTube can be that your internet connection is slow or too much peoole try to watch the same video, save it to your hard drive and then watch or, give him a minute or two to download in the buffer before you start watching.

  • What are the causes videos stop and start again during the transmission?

    What are the causes videos stop and start again during the transmission?

    Hello

    You can update the latest drivers for the video card and check.

    Also perform the clean boot and check:

    http://support.Microsoft.com/kb/310353

    NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in the article above.

    Let us know the results.

  • Video stops at halfway thru - how can I fix.

    When I play a training video for a class I am taking or read an email that contains a video, the video stops at halfway thru, but the audio will continue.  How to solve this problem?  It's very frustrating.  If I stop and start again, it stops in exactly the same place again.   It is not do with each video, but most all of them.  Thank you.

    Hi arliestaab,

    1. you play the instructional video online? If yes then what web browser do you use?

    2 when was the last time it was working fine?

    3. did you of recent changes on the computer?

    4. you receive an error message when the video stops playing?

    Method 1

    See the link below and run the fixit tool available, check if it works.

    Playing video files crashes or blocking Internet Explorer or Windows

    http://support.Microsoft.com/mats/video_freezes_or_crashes/

    Method 2

    If the previous step fails, then I suggest that reduce you the hardware acceleration on your computer and check if it helps.

    (a) click Start, click run, type desk.cpl, and then click OK.

    (b) click on the settings tab and then click Advanced.

    (c) in the performance tab or on the Troubleshooting tab, move the Hardware Acceleration all the way to the right ( Full position).

    (d) click OKand then click close.

    (e) If you are prompted to restart your computer, click Yes.

  • When you watch videos on youtube or try to Watch Tv shows video stops and crashes often?

    When trying to watch videos like on youtube or Tv shows videos stop and stall.  Also his cuts in and out.

    It will be because the information can't come down from your internet connection fast enough for you to watch in real time.
    You can;
    Press pause, give the video time stamp and then press play - the time between each pressure depends on the duration of the video and the quality this is the case, the longer period is better.
    Download the video to your hard drive and then watch
    Get a faster internet connection.

  • My video stops when I go to "print preview." After I upgraded my driver for geforce 9100.

    I have a Hp pavilion P6313w, product # AY633AA-ABA.  After that I've updated a driver on my geforce 9100 now my video stops whenever I go to the preview before printing. stops windows to help protect my computer from permanent damage.

    Hello

    Assuming you have Windows 7 64 bit, try to download and install the driver Nvidia original on the link below and see if that fixes the problem.

    http://ftp.HP.com/pub/softlib/software11/COL31486/PV-78240-1/sp44569.exe

    Once the installation is complete, restart the PC.

    Kind regards

    DP - K

  • Flash player crashes. Video stops and goes. Will not play consistently. Is there a way to update flash player? What are the steps to do it?

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: I can't watch the videos on my laptop. Videos stop and go without running consistantly unless I wait long for it to download. Is this a problem with my Flash Player. If so, how do I update to solve this problem? You have problems with programs

    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    http://kb2.Adobe.com/CPS/141/tn_14157.html

    Uninstall Flash by using the uninstall program Flash Adobe link above.

    Flash is sometimes corrupted.

    http://get.Adobe.com/flashplayer/?promoid=BUIGP

    Reinstall Flash, after 1st unchecking / uncheck the toolbar Google download option there.

    If this does not work, try here:

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

    They will help you with your question in Forum Vista programs at the above address.

    See you soon.
    Mick Murphy - Microsoft partner

  • Videos stopped working

    After being directed to update my version of Shockwave Flash to the newest version (11.3.300.268), all the videos stopped showing. What should I do now? Can I reinstall a version of earliewr? I use Firefox 14.0.1

    Flash Player Help. Installation problems | Mac OS

    Flash Player Help. Installation problems | Flash Player | Windows

    Mylenium

  • Videos stop several times?

    Hi all

    first of all, I have Firefox 3.0.19

    My operating system is 32-bit

    and my flash version is WIN 10,1,53,64

    As for my problem... everywhere I look video (youtube, Dailymotion or any other site) after approximately 02:32 minutes, it freezes.

    When the gel is completed, count another 02:32 minutes and then video freezes again.

    If a break before 02:32 minutes and replayed the countdown starts from the beginning.

    In the past both audio and video used to stop together but now the video stops first then audio takes a minute to stop.

    Knowing that I first load the entire video, then start looking at it, so it is not bringing in buffer problem or something like that.

    Thanks in advance

    Hi BR, I understand what you're saying about being able to watch videos of youtube on another site. Now on making sure that the Internet Zone is set to medium. Go to tools, Internet Options. Click on the Security tab & click on Internet, is where you want the box set to medium. Very important. When you have finished that, and delete Cookies, offline files, and Temp files.

    OK on Avira.

    Now, I want you go the Troubleshooting Guide and make sure that your JavaScript settings are correct.

    http://kb2.Adobe.com/CPS/191/tn_19166.html

    I came across a problem on my own computer Sunday night with Java. So try to remember you updated Java (look in Add/Remove) to 21 update on the site of Java, or a command prompt that you received their share? Just be sure that you have no Java in Add/Remove except Update 21.

    Have you tested with IE and FF here? You see the animation with the two browsers?

    http://www.Adobe.com/software/Flash/about/

    We have uninstalled and disabled a bit, so I want, of course, that nothing has been disturbed.

    Then go to this site and clear the Java Cache, just follow the signs.

    http://www.Java.com/en/download/help/plugin_cache.XML

    I you have given several things to do, so do each of them and then let me know the results.

    Thank you

    eidnolb

  • Video stops playing after the transition

    I want to embed a video in a Keynote slide so that the video starts to play just after the slide in video. When I play the presentation and advance to the slide video, it plays for 1 second, then stops and the presentation falls back in design mode. I tried different video clips and they all do the same thing.

    The video is a MP4. I can integrate the same video into the Powerpoint presentation and it plays OK.

  • Videos stopped playing in safari

    Videos have always played in safari.  All of a sudden stopped.  There is a sign to play with a line going through it now.   Update software, data of the Web site cleared, soft reset iPad. Nothing works

    Have you tried resetting Safari? Go to settings - Safari - clear the history and data from the Web site. After reset iPhone again. You must also make sure if the Internet connection works fine.

  • Page loading and video stops until I have my cursor

    Recently I noticed every time a page refresh or I play any kind of video that both stop until I move my cursor, and then they start again.

    I tried to research today without success so far to solve my problem. I check my Add-ons, update flash, java, etc.

    Problem is still there... someone can help?

    Hey, just to keep you updated - there is now a fix available for firefox 25, to focus on the particular problem of the pages won't load not unless the mouse is moved.

    If you have downgraded to firefox 24 to work around the problem, please go to firefox > options > advanced > update and re - turn on automatic updates. Then go to firefox > help > about firefox that should trigger the update for firefox 25.0.1.
    just in case you need to download the installer for firefox 25.0.1 separately https://www.mozilla.org/firefox/channel/#firefox

  • Flash video stops playing after 10-12 seconds

    Not sure when this started, but the videos now only play for about 10-12 seconds at a time. No crashes just breaks down, no errors, and it's only video. I can jump to another point in the video, and it stops after 10-12 seconds from there. I'm on the latest Firefox with the latest version of Flash. I tried to uninstall Flash using the Adobe uninstaller program. I reinstalled with 10.3, 11.2 and later even more once without success. I turned off hardware acceleration, no luck. I manually chose the resolution of the video, no luck. I started in safe mode and activated the plugin Flash, no luck. In any case have ideas?

    I tried the other two, but the Middle, I had not seen. In this page, I found that the HTML5 video play at all. So I checked my display drivers, and they have been of 2011. After their update that the problem is solved, thanks for the help.

  • videos stopped playing

    cannot view photos from Webshots Pro shots weekly
    stop playing YouTube videos
    sytycd videos do not play
    they all play very well IE

    Hi dancehappy, see:

    11.3 Flash does not load video in Firefox

    11.3 Flash crashes

    Your best solution is to downgrade to Flash 10.3, until Adobe released an update to Flash.

    Thank you

  • Video stops or doesn't show even "in power saving Mode" on Presario S4000V

    I have a Presario S4000V with a PNY GeForce FX5500 DDR 128 MB video card. The display does at all when starting or stops anywhere from start up through successful display Windows. When the screen turns off, press any button on the front panel on the monitor to display 'in Power Save Mode press any key on keyboard or move mouse', but none of the measures have no effect.

    Move the video card to a different location or using another monitor makes no difference and I can't find any setting to change in the CMOS Setup or properties which solves the problem of display Windows.

    Any suggestion would be appreciated gratefully.

    Replace the graphics card. Problem solved.

Maybe you are looking for