Videos with 15.2 clock does not work

Similar Questions

• What is wrong with this sequence, it does not work when, after 3 inserts, I add a new record with the trigger it gives an error.

  Mr President.

  What is wrong with this sequence, it does not work when, after 3 inserts, I add a new record with the trigger it gives an error.

  --SL_CUSTOMERS table data
  
  
  INSERT INTO SL_CUSTOMERS VALUES(1,'Kamrul Hasan',NULL,NULL,'Moghbazar', 'Dhaka','0456789123',NULL,NULL,NULL,'Y',NULL);
  INSERT INTO SL_CUSTOMERS VALUES(2,'Rabiul Alam',NULL,NULL,'Motijheel', 'Dhaka','0567891234',NULL,NULL,NULL,'Y',NULL);
  INSERT INTO SL_CUSTOMERS VALUES(3,'Shahed Hasan',NULL,NULL,'2-G/1,2-2,Mirpur', 'Dhaka','0678912345',NULL,NULL,NULL,'Y',NULL);
  
  
  
  

  CREATE SEQUENCE  "ALIZA"."SL_CUSTOMERS_SEQ"  MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER  NOCYCLE ;
  
  
  CREATE OR REPLACE TRIGGER SL_CUSTOMERS_TRG 
  BEFORE INSERT ON "ALIZA"."SL_CUSTOMERS"   
  FOR EACH ROW   
  BEGIN   
  IF :NEW.CUSTOMER_ID IS NULL OR :NEW.CUSTOMER_ID < 0 THEN  
    SELECT SL_CUSTOMERS_SEQ.nextval   
      INTO :NEW.CUSTOMER_ID  
      FROM DUAL;   
    END IF;   
  END;   
  /
  
  
  
  

  When I try to insert several records with the seq.nextval it gives error

  violation of primary key.

  INSERT INTO "ALIZA"."SL_CUSTOMERS" (CUSTOMER_NAME) VALUES ('sdfsd')
  ORA-00001: unique constraint (ALIZA.SL_CUSTOMERS_PK) violated
  ORA-06512: at line 1
  
  
  
  
  One error saving changes to table "ALIZA"."SL_CUSTOMERS":
  Row 4: ORA-00001: unique constraint (ALIZA.SL_CUSTOMERS_PK) violated
  ORA-06512: at line 1
  
  
  
  
  
  
  
  

  Concerning

  Mr President.

  I find the solution by creating a function before the triiger

  as below

  CREATE SEQUENCE  "ALIZA"."SL_CUSTOMERS_SEQ"  MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER  NOCYCLE ;
  
  CREATE OR REPLACE FUNCTION get_SL_CUSTOMERS_vId RETURN VARCHAR2 AS
  BEGIN
     RETURN SL_CUSTOMERS_SEQ.NEXTVAL;
  
  END;
  /
  
  CREATE OR REPLACE TRIGGER SL_CUSTOMERS_TRG
  BEFORE INSERT ON "ALIZA"."SL_CUSTOMERS"
  FOR EACH ROW
  DECLARE
  dummy VARCHAR2(200);
  BEGIN
    dummy := get_SL_CUSTOMERS_vId();
    :NEW.CUSTOMER_ID := dummy;
  END;
  /  
  

  It works very well

  Thank you all for the suggestions.

  Concerning

• I look integrated in the block of the legend of slide show, a widget like "Accordion" for, with one click, or by the way with the mouse, open a new caption for each photo. I tried with 'Accordion' Muse, it does not work. I haven't tried to copy and paste,

  Issue.

  I look integrated in the block of the legend of slide show, a widget like "Accordion" for, with one click, or by the way with the mouse, open a new caption for each photo. I tried with 'Accordion' Muse, it does not work. I haven't tried to copy and paste, but no result. The widget disappear into the legend of block. disappear. Do you have a solution?

  Thank you

  Loïc

  Accordion Panel tabs should, with click and open the container.

  Please provide the url of the site where it does not, also if you can provide an example where we can see the exact action, then it would help us.

  Thank you

  Sanjit

• I don't want to start a discussion! I just want to help with a product that does not work!

  I don't want to start a discussion! I just want to help with a product that does not work!

  http://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  Mylenium

• Cannot run the screen saver because it requires a newer video card or one that is compataible with Direct3D. Hotfix does not work/run

  I am running windows 7 ultimate, 64-bit, SP1

  The screen savers say they can't run, they need a new video card, or a compatible with direct3d.

  I ran the fix.  The issue is pending. Hotfix: KB2159238

  http://support.Microsoft.com/kb/2159238

  All of the video drivers are up to date and they support Direct3D.

  Seems a lot of people have this issue - how to fix? Yet once again, the fix does not work (says "this update is not applicable to your computer")

  

  

  Hello Dave,

  Thank you for your response.

  I appreciate your time and your concern.

  It is normal that the fix is made for the Windows 7 version without service pack 1.

  I hope you can try the following methods provided in the previous post.

  However, if the problem persists, I suggest you to uninstall and reinstall display drivers.

  Step 1:
  Uninstall the display driver.

  a. Click Start, type Device Manager in the start search box and press ENTER.
  b. expand 'graphics', right-click on the map and click Uninstall.
  c. restart the computer, if the prompt message.

  Step 2:
  Install the latest driver to display from this link:
  http://66.226.78.22/DownloadSite/drivers/Intel/VGA/VGA (v15.33.31.64.3993) .zip

  For reference:
  http://www.ASRock.com/MB/Intel/B85M-ITX/?cat=download&OS=Win764

  Please keep us updated on the status of the issue.

  Thank you

• Satellite L655-121 PSK1JE integrates a video chip on i5 CPU does not work

  Hello

  I have a question,
  Why the video integrated into the i5 450 m CPU does not only works the hd5650...?

  Why the site does not mention this model of toshiba laptop?

  My laptop is satellite L655-121 PSK1JE

  What do you mean by it does not work?
  How t should work? What did you expect?

  Support for computer laptop Intel Core i5 - 450 M processor
  The laptop was equipped with additional graphics ATI Mobility Radeon HD 5650.
  It's the main GPU and I don t understand how you want to use both GPU's?  :|

  > Why the site does not mention this model of toshiba laptop?
  How about that:
  http://IL.computers.Toshiba-Europe.com/innovation/en/series/satellite-L655-series/1088633/

• Open submenus when I stop on them with the mouse pointer does not work

  I used to use Vista Upgrade of XP until it hit the big time. With this installation, the option 'Open submenus when I dwell on them with the mouse pointer' worked perfectly well.  Since I did a format and installed the full installation of Vista version, and now this feature does not work. I checked and re-checked the option in the customization of the menu star and nothing. Also unable to find what anyone at the mouse settings itself.

  Does anyone know how to get this feature to work again once it's something I use a lot.

  Concerning

  Owen

  Hello

  If none of these help or you find a solution please report.

  Does work here on Vista either, but I don't want it works even if it is checked.

  Try UnChecking the start - Customize - Menu tab apply / OK and then go back and save
  Apply / OK.

  If no joy this initiative will eventually.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------

  Maybe something here: [check Control Panel - mouse or TouchPad (as applicable)]

  If a mouse (or if you use a touch screen and a mouse)

  Start - computer, or Windows Explorer - Tools - Folder Options - general tab - check the
  Single click to open an item - APPLY / OK

  Control Panel - mouse - look for hover or click Automatic similar settings according to your mouse.

  When a TouchPad

  Look in the Notification area next to the clock for all TouchPad control program.

  Control Panel - mouse - also look for it TouchPad (mine is on the device however settings tab
  other brands and maybe on the other tabs and more than one). There are usually the parameters that
  can determine if a click, double click, hover or can open or close a program.

  Start - computer, or Windows Explorer - Tools - Folder Options - general tab - check the
  Single click to open an item - APPLY / OK

  If some people are well positioned can change to some other setting if you plan to leave
  them that way and then change again.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Video call of Facebook app does not work

  I tried and tried to install the video calling of Facebook application. I downloaded the executable, but it does not work. When I click on the file, the "Run" dialog box appears, I click on "Run" and then nothing happens. I tried to solve the problems of compatibility and Windows tries to run in XP compatibility, but it still doesn't work. Of course Facebook is no help at all. I tried to run it as administrator (even though I'm the admin & signed this way). I don't know what else to do. Any help would be appreciated.

  Hello

  1. are you able to install any other application?

  2. don't you get any message or an error code when you try to install the application?

  3. do you remember the computer before the issue?

  Try these steps and let me know the status.

  Method A:

  Solve problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method B:

  Try to set up your computer in a clean boot state, and check if the same issue occurs

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem. 

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  For more information and help, click here: http://www.facebook.com/help/issues/video-calling

  I hope this helps.

• The BIOS clock does not work after upgrade to Windows 7

  XW4300 workstation has been recently updated to Windows 7 from XP pro.  After the update, the system clock did not keep accurate time, then I entered the BIOS Setup and set the time here.  After several hours, I rebooted, entered the BIOS configuration and noticed clock BIOS had not changed.  I replaced the CMOS (CR2032) battery with three different batteries and BIOS clock does not always change.

  Occasionally, Windows 7 system clock will synchronize to the BIOS clock, which creates the incorrect time in Windows. I can see these events in the system event log.

  Is it possible that this problem is related to the Win 7 upgrade, or is it a problem without a report?  Suggestions to control or fix the BIOS clock beyond what has been done so far?  If I can't fix the BIOS clock, is it possible to prevent the synchronization of the clock in the BIOS Win 7?

  ERICO wrote:
  

  Replace the jumper CLRCMOS or CLRRTC to its original position after erasing the CMOS memory and flashed the BIOS? If you do not then the time will be reset whenever you turn off the PC.

  I have not found a CLRRTC jumper on the 4300.  Is there a jumper to reset the password (E49), and a CMOS reset button.

  However, I tried to reinstall the battery with power supply cable disconnected, and it reset the CMOS all anyway.  Reset the CMOS seems to have solved the problem.  BIOS clock has now begun to follow the exact time again.  I rebooted several times now, and the time is now correctly.

  Thank you all for your suggestions.

• Why deletion of images of iPhone 4, iOS 7.1.2 with Capture of Image does not work?

  Using the key delete does not work and selecting 'Remove' in the edition menu is grayed out.

  Hi Varoop13,

  Thank you for using communities Support from Apple! I'm sorry to hear that you're having these problems with your iPhone and Capture of Image. I'm a little unclear on exactly which version of Mac OS X you are using or what you see in the Image Capture, but you may want to look for a button with a circle-slash () icon; It's recent releases how Capture of image mark the delete key. It will be active when one or more images have been selected. It is also a behavior whereas the keyboard delete key will not remove the images selected, and that the delete option under the Edit menu stay grayed out. You can see some of these options, it is stated in the following article:

  Use the buttons at the bottom of the window to Capture of Image to display thumbnails in a list () or to display larger thumbnails (), or to rotate () or delete () images.

  Transfer pictures - Image Capture help

  Concerning

• PSUS4 with Lexmark X 3330 does not work

  Hallo,

  I have a Lexmark X 3330 MFP and a PSUS4 print server.

  Driver installation works very well and I followed the instructions exactly. BiAdmin diagnostic tool can find the printer as well as the Web interface.

  But if I want to print a testpage "no communication" message appears.

  I have updated to the latest firmware, latest drivers, reset the pc and the printserver and stuff everything standard, but did not work.

  The printserver works very well with a kyocera mita FS1900 that has a LAN connection, but with my lexmark I have no luck.

  I'm very disappointed, I have such a device, which does not work, and that there is no list of compatibility for this device.

  Is there a way to get the lexmark works or should I buy an MFP with connection to the LAN?

  Best regards

  If your print server works very well with one of your printers (kyocera mita FS1900) print server is functional... You like your print server printer all-in-one Lexmark X 3330 that it didn't print that as your print server is unifunctional and not multifunctional... You will not be able to fax, scan or copy... It is better to have a multifunction print server to use all the functions of your printer...

• HP Officejet Pro 8500 A909a_ Scan with HP Solution Center does not work

  Hallo.

  My name is Michele.

  I can't use the solution Center HP to scan with my HP Officejet Pro 8500 A909a (I have windows 7 O.S.) because when I click on "Scan document", a white error window appears and says "necessary component is unfounded or not properly installed.". Install new software HP Photosmart". I uninstalled and again installed the software, but it does not work. Previously, he worked with XP. Recently, I updated XP with Windows 7 and I found the solution Center HP does not work. Maybe, it does not match with Win 7?

  Thank you to everyone who wants to help me

  Hi people,

  I appreciate the time you took to try to solve this problem. I was able to do more research and found a useful solution, please click on the link below to get started:

  The HP imaging device is not found... - popup error

  Please try the recommendation and let me know the results.

  Thank you

• Check sensor SFR with FireSight via VPN - does not work

  Hello security experts.

  I have an ASA5515-X with SFR installed 5.4.0 and manage with 5.4 FireSight installed on the virtual machine on LAN and I record the sensor without any problem but when I try to register the sensor to FireSight via VPN I can't do. The interface on the ASA management has no intellectual property nor nameif configured and the interface is connected to the switch, SFR has the IP even configured as LAN addressing. I can see traffic being exchanged between the sensor and the FireSight but I can't save the sensor.

  Has anyone managed to register the sensor via VPN? Is there something else to be configured in order to save the sensor with the MC via the VPN?

  The delay between the Firesight and the sensor (on WAN and VPN) I get between 80 and 100 ms, what could be the problem?

  Thank you very much!

  Remi

  Hello

  If you are unable to telnet from DC to the sensor on the port 8305 delivers connectivity then.

  Can try you to ping from sensor to DC:

  ping -M do -c 20 -s 1572 

  By default, the MTU is 1500 on eth0, if the ping does not work I will suggest to lower the MTU on the interface and see if it works. See also: / var/log/messages | grep sftunnel and see the error messages on DC and sensor and send it to me everywhere. Best regards, Aastha Bhardwaj rate if this is useful!

• JavaScript works with an alert, but does not work without it. Why?

  This happened to me before, but I was able to solve my problem. Now I'm not.

  Let me explain: I have a javascript function which I call when I double click on a line on a table:

  [code]

  	function CallServ (evt) {}
  	source var = evt.getSource ();

  	AdfCustomEvent.queue (source, "call",
  	{
  	},

  (false);

  	auxDblClick.call (this, source);
  	}

  	function auxDblClick (CBC) {}
  	split var = src.toString () .split ('=');
  	var idButton = split [1];
  	var split2 = idButton.split(':');
  	okButton = split2 var [0].concat(':');
  	for (var i = 1; i & lt; (split2.length - 1); i ++) {}
  	okButton = okButton.concat (split2 [i], ' :');)
  	}
  	okButton = okButton.concat ('dc_cb1');
  	var comp = AdfPage.PAGE.findComponent (okButton);
  	Alert (COMP);
  	AdfActionEvent.queue (comp, comp.getPartialSubmit ());
  	} [/ code]

  As you can see, my alert line is commented. If it is not commented, the "auxDblClick" feature works very well: it will print the model on the alert, and then it will perform the action of the dc_cb1 button. However, when I commented the alert function, it stops working.

  I have PartialTrigger set to "true" on my dc_cb1 button and the clientComponent is set to 'true '. I've also set to true ClientComponent on the table, but it does not work.

  So, why the function working with alert, but does not work with the alert off the coast? What Miss me?

  
  P.S: jdev version 11.1.2.4.0

  I found the solution:

  Before the "AdfActionEvent.queue (comp, comp.getPartialSubmit ());" line, I used the update function. Like this:

  	var t = document.getElementById (okButton);
  	t.Focus ();

  Now everything works fine

• Works writing Maske in swf and video - Datei nicht fonts mask does not work in the swf and video files

  Hallo,

  ICH habe eine writing-Maske standing. In der Voransicht auf der Zeitleiste looks man die Maske,.

  Wie sie richtig should be.

  Aber in exportierten und swf videos. Dateien wird die Maske non dub.

  Was mache ich please.

  
  

  Hello
  
  I created a signature mask. In the Preview on the timeline, you can see the mask,
  as it should be correct.
  But in exported swf videos. files the mask does not work.
  
  What I am doing wrong.

  
  

  
  

  

  I don't see anything that looks like a mask on your stage effect.

  in general, I think the image hidden (below OCAKBAŞI) is visible and nothing else.  you have two other visible layers makes it difficult to see what you are trying to demonstrate.

  text mask problems generally, because the text is not broken down into vector shapes (by clicking on edit > to break > to break).