View Composer unable to connect to vCenter

Similar Questions

• When I change authentication to LDAP (EMbedded LDAP) vco for test, vco client is unable to connect to vcenter. Can someone tell me what is the problem I have

  It is seemly all things are OK configuration web page

  But vco client is unable to connect to vcenter

  Have a screenshot of the vCenter plug-in would help.

  If it is set at the session by the user that the vCO will try to authenticate with the LDAP credentials embedded on the vCenter which of course will fail.

• View Connection Manager is unable to connect to vCenter after upgrade to vCenter 5.0

  Our upgrade to vCenter Server 5.0 went smoothly and that our environment is transferred to ESXi 5.0.   However, since the upgrade our environment view seems not to be connected to vCenter.  If I go to view administrator > Configuration > servers and change the entry for our vCenter Server I get a connection failure message when you click "OK".

  I checked that the username and password specified to connect to vCenter administrator mode are correct.

  4.6 and earlier versions is not supported and will not work with vSphere 5 (look on the VMware compatibility matrix). I am bitten by this before so I checked that before even thinking about updating to ESXi 5. You need to wait seen 5.0 for compatibility with ESXi 5.

• vFoglight unable to connect to vcenter after disabling sslv3 7.0

  Y at - it a patch for vfoglight 7 which allows for connectivity to vcenter TLS?

  After you disable SSLv3 in vcenter, foglight is unable to connect.

  [Quartz [0] - 90] ERROR com.quest.agent.esx.task.RelationsTask - error when running: ERROR: VI SDK invoke exception: javax .net .ssl .SSLHandshakeException: remote host closed connection during handshake

  java.rmi.RemoteException: VI SDK invoke exception: javax .net .ssl .SSLHandshakeException: remote host closed connection during handshake

  at com.vmware.vim25.ws.WSClient.invoke(WSClient.java:183)

  at com.vmware.vim25.ws.WSClient.invoke(WSClient.java:125)

  at com.vmware.vim25.ws.VimStub.retrieveServiceContent(VimStub.java:1409)

  to com.vmware.vim25.mo.ServiceInstance. (ServiceInstance.java:85)

  to com.vmware.vim25.mo.ServiceInstance. (ServiceInstance.java:69)

  at com.quest.vmware.api.connection.VIService.connect(VIService.java:60)

  at com.quest.vmware.api.connection.VIService.login(VIService.java:82)

  at com.quest.agent.esx.task.ESXAgentTask.connect(ESXAgentTask.java:178)

  at com.quest.agent.esx.task.ESXAgentTask.run(ESXAgentTask.java:116)

  at com.quest.agent.esx.ESXAgent.runTask(ESXAgent.java:407)

  at com.quest.agent.esx.ESXAgent.esxRelationsCollection(ESXAgent.java:469)

  at sun.reflect.GeneratedMethodAccessor42.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at com.quest.glue.core.services.EquivalenceInvocationHandler.invoke(EquivalenceInvocationHandler.java:70)

  at com.quest.glue.core.agent.AgentInteractionHandler.invoke(AgentInteractionHandler.java:186)

  to com.sun.proxy. $Proxy55.esxRelationsCollection (unknown Source)

  at sun.reflect.GeneratedMethodAccessor42.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at com.quest.glue.core.agent.scheduler.CollectorCallback.invokeCollector(CollectorCallback.java:162)

  at com.quest.glue.core.agent.scheduler.CollectorCallback.execute(CollectorCallback.java:130)

  to com.quest.glue.core.scheduler.quartz.QuartzScheduler$ ScheduledTaskSequentialJob.execute (QuartzScheduler.java:716)

  at org.quartz.core.JobRunShell.run(JobRunShell.java:202)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:895)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:918)

  at java.lang.Thread.run(Thread.java:662)

  2015-09-01 15:25:31.798 ECHO FATAL [Quartz [0] - 90] com.quest.agent.esx.task.RelationsTask - the agent could not establish an SSL secure connection to the VirtualCenter.  Please check your configuration of the agent in order to ensure a connection correct information has been entered.

  2015-09-01 15:25:31.798 ECHO

  Thank you

  Hi JLAPRADE,

  I read a similar case, it seems that the problem could be solved either:

  1) that allows SSLv2Hello to vCenter, or

  (2) upgrade to the latest Foglight/Agent managers to the latest version.

  Regarding the #1 option:

  Client configuration file updated the vpxd.cfg in vCenter. It's the line that needs to be changed:

  TLSv1

  To add the SSLv2Hello Protocol, the client he added after a comma:

  TLSv1, SSLv2Hello

  This solves the problem for this client, but you can check with VMware.

  If the problem persists after trying these solutions or if you have problems, their implementation, please open a request of Service (SR) with the support and mention this thread.

  This is where an SR can be created: support.software.dell.com/create-service-request

  Concerning

  Gaston.

• Unable to connect to vCenter Server 5.0 using the vSphere Client - unknown error.

  I am trying to connect to vCenter using vSphere client (from different computers, including the server itself) and get this:

  vSphere Client could not connect to "vCenter_Server_IP_Address".
  A unknown connection error has occurred. (The request has failed because of a logon failure. (Unable to connect to the remote server))

  I am able to connect to the host directly, but of course, can't do anything with it since the vCenter is "in da house".

  There is no problem with it, not big changes and nothing indeed directly on the server vCenter (i.e. W2008r2x64) so, my confusion deepens. 5.1 ESXi

  Any ideas what could have happened and how to fix it?

  observe the following error in the logs.

  2014-04 - 04T 13: 35:23.506 + 01:00 [error 02720 "Default" opID = SWI-f3a52464] [VdbStatement] given the driver diagnosis are 42000:1:1105: [Microsoft] [SQL Native Client] [SQL Server] could not allocate space for object ' dbo. VPX_EVENT'. 'PK_VPX_EVENT' in 'VIM_VCDB' database because the 'PRIMARY' filegroup is full. Create disk space by deleting unnecessary files, removing objects in the filegroup, a

  Follow this article to fix the problem.

  http://alexjs.EU/VMware-ESX-and-a-full-SQL-Server-database/

• Unable to connect to vCenter Converter Server and failure to register the extension

  Hello

  Recently, I was doing the following error on our vCenter Server server while trying to import a virtual machine - "unable to connect to the server vCenter Converter Server.

  I followed the recommendations of the other post of the community http://communities.VMware.com/thread/239203 However, I still get the same error.

  I tried to run a repair on vCenter Converter of add/remove programs however I get the following error:

  "Cannot save the extension.

  I restarted the server as well and still no change.

  Any ideas?

  If you have changed the IP address on the VC, your best option is probably uninstall the Update Manager and converter, once again.  delete their directories under \program files\vmware\infrastructure\ installation, restart and install again.

• Unable to connect to Vcenter Server

  I couldn't connect to vCenter Server when you use the web client of vSphere. The administrator accesses vCenter Server by using the customer earlier in the day. ?

  Verify that the vCenter Single Sign-On service is running on the server vCenter Server

• View is unable to connect to the agent with PCoIP

  We can connect to the virtual machine with RDP and PCoIP not working. The client starts to connect to the agent, the screen remains black, then customer exits

  The firewall should not be the problem, customer and agent can communicate because of newspapers and wireshark.

  Any idea is welcome here.

  Our facility:

  ESX 4.1

  VCENTER 4.1

  VManager 4.0.1 (updated)

  VIEW 4.0.1 (updated)

  I think this may be your problem.

  When updating ESX 4.0 Update 2 my PCoIP broke.

  There is a task 4.0.1 agent that must be installed on the virtual machines.

  VMware KB 1022830 KB1022830

• Unable to connect to vcenter after change of firewall

  Try to solve my backups VM Explorer, by default, on a single host I enabled ports NFC ()) - 23, 1024-65000. It was not checked, so I checked and limited to a subnet that guests and almost all of the virtual machines are in. As soon as I put it, my vsphere client began to turn and gave me connection errors. So, I used a vpn to connect to a windows server in this subnet and IE to connect to the web client. I always get connection errors.

  Since all hosts and most of virtual machines, including vcenter, are in this subnet, why should I be cut off? I can ssh in this host, so is there a process I can kill?

  Thank you.

  Update:

  Not the port of the NFC. It was ports connector vm series, which included the ports incoming and outgoing used by our iscsi san and that's why everything went to hell. I should have allowed the rule but left everyone rather than define a subnet restriction. I managed to enter the host itself and reset the Firewall setting, then restarted vcenter. Everything nice fixed now. Waiting to hear if any data has been watered.

• Unable to connect to vCenter Webservice

  ESXi 5.1.0 1117900

  vCenter Server 5.1.0 1123961

  I installed vCenter Server with Server Single Sign-on and all is well until I tried to connect to the Web Service.  No matter what I tried I couldn't open the session, except after the installation of authentication Session of Microsoft.  I can connect successfully with Windows authentication, but not with vCenter authentication.  During installation, the user name was gray with admin@Service-Domain.  My domain name is spatialhaze.com, so I've been using [email protected] and the password I put without success.  Any guidance would be appreciated.

  TIA,

  stmux

  http://pubs.VMware.com/vSphere-51/topic/com.VMware.vSphere.install.doc/GUID-6BDE5582-DFCD-4d2D-BD09-016B2C4D1CF7.html

  By default, the admin@System-Domain user can connect to the Web Client vSphere and vCenter Server

  Here the user name is "admin@system-domain" which is the default user for authentication UNIQUE/Single Sign On account

• VMware View 5, unable to connect to the login server

  Has anyone seen a problem of not being able to connect to a server connection view 5, either with clients intelligent or even using the http://localhost/admin on the server? We had Windows patches pushed last night and now the software seems to not work.

  Windows 2003 R2 Ent Edition

  VMware View 5

  I noticed the patching procedures require you to uninstall view but not ADAM, so in theory I should be able to uninstall and reinstall without affecting stored prior information. Has anyone tried this before?

  Welcome to the forums.  I've uninstalled and reinstalled but you should be able to backup the DB ADAM and restore if necessary.    Have you checked the view logs to see if you can understand why it is not reponding?

• Unable to connect to vCenter Server chargeback

  Hello!

  We installed vmware chargeback of a virtual appliance, now we try to connect to a vCenter server.

  SQL connection fails, we can connect using odbc or using sql server studio remotely connected using these creds.

  But we get an error when connecting with the chargeback unit. I have attached the file.

  Release notes, I see words about this message saying that if we get then the password is incorrect, but that's OK.

  How we thoubleshoot this question?

  Hello

  It seems that you are using for the VCDB Windows authentication, which is not possible when you use Vitual machine. Please use "SQL server Authentication" and provide the database user name and password in the dialog box add vCenter server.

  If you want to use Windows for VCDB authentication, you must use the windows version of the server of chargeback.

  Hope that helps. Please let me know if you have any additional problems.

  Kind regards

  Agnes

• vpshere client unable to connect to vcenter vcva

  Hi all

  I have install esxi on a virtual machine, and I can connect to with vsphere client. I have download vcva and depoy, I configure it from a browser, and it started. but when I try to connect with vsphere client I got an error message: the remote server connection failure are taking too long to respond. (see the attached log file)

  I can ping and I can connect to the web interface from a browser on another machine to configure - what I've done, I would say. I set up the embedded database, etc..

  
  find attached a log file.

  1. Connect to SSO via vSphere Web Client as user admin@system-domain.
  2. Navigate to Administration > Sign-On and discovery > Configuration > change source of identity for the area.
  3. Change the URL of the backend:
     • Address of global catalog

       For example:

       LDAP: / /global_server: 3268

     • Address Secure Global catalog

       For example:

       LDAPS: / /global_server: 3269

  4. You may need to enter you password if the authentication type is set to password.

  Reference: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2038918

• Unable to connect to the server vCenter because the user name or password not valid

  Hello

  I have a VMware View version 5.1.0 installation (704644) and when I try to add additional virtual machines to an existing pool I get the message (cannot connect to the server vCenter because the username or password are invalid).

  I have checked all the instructions below and still failed to add virtual machines

  If you are unable to connect to vCenter Server:

  1. Confirm that a network port exists and is available. For more information, see increase the number of ports assigned to a virtual switch for VMware View (1026014).
     
     
  2. Confirm services VMware View manager are running. For more information, see check which required VMware View Manager services are running (1026136).
     
     
  3. Confirm that the network is correctly configured for use in a VMware View environment. For more information, see in the VMware View virtual desktop network configuration (1026498).
     
     
  4. Confirm that name resolution is functioning properly in your environment. For more information, see audit for VMware View DNS settings (1026017).
     
     
  5. Check that the permissions/credentials are correct for the user of the vCenter server. For more information, see confirm/credentials permissions are correct for user vCenter/vCenter server (1028705).
     
     
  6. Confirm that outcomes of the interaction of third parties do not exist with the operating system. For more information, see the confirmation that there are no questions of third-party interaction with the OS in a VMware View environment (1027466).
     
     The virtual machine, I have already assigned to this pool, I can access. I can access by using the client view and also from the console.
     

  Has anyone else seen elsewhere?

  See you soon

  You have the same problem with other pools?   Have you returned through configuration under the Configuration/servers view vCenter configuration?

• There was an error trying to connect to the View Composer.

  Like most others, I try to get 4.5 view running

  I have Vcenter 4.1 and 4.5 seen installed on Windows 2008 R2 VMs 2.

  I installed view composer 2.5 on the Vcenter server on the default port 18443.

  I have disabled the firewall on both machines to make sure can communicate.

  But when I try to connect to the server to connect to the composer I get only error while trying to connect to View Composer.

  I am at a loss at this stage,

  The only thing I can find in the case of the newspapers is lower, it shows the same time I did install it.

  There is no information identifying the appropriate default server on this system. This will prevent server applications that expect to use the credentials of the system default to accept SSL connections. The directory server is an example of such a request. Applications that manage their own credentials, such as internet information server, are not affected hereby.

  I think that stuff VM manages its own credentials.

  Any ideas?

  Have you checked that the composer function is running on your vCenter Server? Nothing in Event Viewer related to the composer?