View horizon 5.3 - grid K2 - vDGA - vCenter console does not

Similar Questions

• My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

  My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

  Right-click on the header at the top of the list of messages and select from the list of options.

• 5.5 vcenter server does not start after IP change

  Hello

  I had the server vCenter 5.5 (all) installed, using the domain name COMPLETE for all. Everything works very well.

  After that, I need to change the IP address of the server, so I made a DNS has been modified, the server can be ping by name and she is resolved to the new IP address.

  All other servers, including the ESXi hosts can it ping by name and resolve the IP address.

  Problem is that the vCenter service does not start.

  I see this on newspapers:

  2013-11 - 07T 13: 33:37.133 - 08:00 [06252 error "HttpConnectionPool-000001' '] [ConnectComplete] connection failed for < cs p:000000000a0ab3a0, TCP:192.168.155.16:7444 >; CNX: (null), error: class Vmacore::SystemException (a connection attempt failed because the connected party responded properly after a period of time, or an established connection failed because connected host has failed)

  2013-11 - 07T 13: 33:37.133 - 08:00 [06224 error "[OSP] [SsoCertificateManagerImpl]"] [RetryOnConnectionFailure] SystemException while trying to connect to the SSO Admin Server: class Vmacore::SystemException (a connection attempt failed because the connected party responded properly after a period of time, or an established connection failed because connected host has failed)

  2013-11 - 07T 13: 33:37.133 - 08:00 [info 06224 "[OSP] [SsoCertificateManagerImpl]"] [CreateAdminSsoServiceContent] will try to connect again in 10 seconds.

  2013-11 - 07T 13: 33:38.649 - 08:00 [05508 WARNING opID "VpxProfiler" SWI-35702e2f =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2013-11 - 07T 13: 33:50.650 - 08:00 [06252 WARNING opID "VpxProfiler" SWI-4b63962d =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2013-11 - 07T 13: 34:02.650 - 08:00 [05508 WARNING opID "VpxProfiler" SWI-6c4f3258 =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2013-11 - 07T 13: 34:08.142 - 08:00 [06304 "Default" warning] unable to connect the plug; < io_obj p:0x0000000009c76ca8, h:1104, < TCP '0.0.0.0:0' >, < TCP '192.168.155.16:7444' > >, e: System: 10060(A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond)

  2013-11 - 07T 13: 34:08.142 - 08:00 [error 06304 "HttpConnectionPool-000001' '] [ConnectComplete] connection failed for < cs p:000000000a0ab3a0, TCP:192.168.155.16:7444 >; CNX: (null), error: class Vmacore::SystemException (a connection attempt failed because the connected party responded properly after a period of time, or an established connection failed because connected host has failed)

  2013-11 - 07T 13: 34:08.142 - 08:00 [06224 error "[OSP] [SsoCertificateManagerImpl]"] [RetryOnConnectionFailure] SystemException while trying to connect to the SSO Admin Server: class Vmacore::SystemException (a connection attempt failed because the connected party responded properly after a period of time, or an established connection failed because connected host has failed)

  The 192.168.155.16 is the old IP. So somehow, it is the search for the IP address instead of the name, but I did I installed everything using FULL domain name.

  How can I fix it?

  If I add the old IP as a secondary IP address everything works fine, but I don't want to leave it like that.

  Any help will be appreciated.

  Gus

  Hello..

  Try to look into the vCenter config file start with... "C:\ProgramData\VMware\VMware VirtualCenter\vpxd.cfg".

  / Rubeck

• vCenter Server does not send data to vCenter Log Insight

  I second vCenter server in another site, in Insight Log connection tests but I don't see any data from it...

  ESXi hosts connected to this server vcenter report their data after you run the command configure esxi on the tank.

  Where I can watch on the vCenter box that does not ensure that its installation correctly to send the data?

  Log Insight does not change to vCenter server so there is not place to search the vCenter Server (API calls only - you could try to look at events for the instance of vCenter Server view connection / disconnection of the events in log Insight). Usually when the vCenter Server events, tasks and alarms are not observed it stresses a connection permissions problem. The user specified for vCenter Server integration - must read-only permissions that are set on the object level superior vCenter Server and have you selected the checkbox to enable the authorization to broadcast across all objects? If so, can you generate a beam of support-> page Health Administration and transfer it by the directions here: http://kb.vmware.com/kb/1008525 (not necessary for a SR, simply create a file called chasehansen)

• Downloaded an update for Olympus Viewer on my Mac Mini (2016).  Computer now does not restart.

  Computer: Mac Mini (2016); 10.11.3 OS

  I have a problem, restart the computer after the update Olympus Viewer.

  After I clicked on Restart, the Mac went through the usual screens, and I was able to enter my password.  After that, he on board to the next screen, but with the addition of terror "beachball" and does not go past this screen.

  Any ideas on what to do about it are very welcome.

  Thank you very much.

  start in safe mode

  Try safe mode if your Mac does not end commissioning - Apple Support

  then remove the software as shown in the developer on their Web page for your product

  then restart normally.

• Flex4: My grids with mx:PrintDataGrid print does not print the column headings

  It's a simple mx:DataGrid with only 3 mx:DataGridColumns.

  I use a s:VGroup as the print view. It contains a s:HGroup with two labels for the page header and then a mx:PrintDataGrid.

  The data in the grid print well but the column headers are left white. Just have the gradient background, but no text.

  Someone at - it suggestions of what goes wrong?

  Thank you

  Ingo

  Yes, what would cause the problem.

  I would like to make a copy of the DataGridColumns.

  CDL of the var: Array = sourceDataGrid.columns;

  Var n: int = cols.length;

  Var printcols:Array = new Array();

  For (var i: int = 0; I have< n;="">

  {

  var newCol:DataGridColumn = new DataGridColumn;

  .dataField cols [i] = newCol.dataField;

  newCol.headerText = cols [i] .headerText;

  newCol.width = cols [i] .width;

  ...

  printcols.push (newCol);

  }

  PrintView.printDataGird.columns = printcols;

• VCenter Service does not start after changing the port number

  Hi all

  Accidentally, I changed the port number for the Vcenter server from the portal of VCenter 10443 and dint realize that the Java application uses 10443 so.

  Could not start the server vcenter service, because its raise an error saying 10443 port is already im currently byt used another application.

  I tried to stop the Java service, in order to start the vcenter service and make changes to port again, numbers but I am unable to stop the java application.

  Please, if anyone knows how to change the number of Vcenter via config port or any other way, please throw a comment... Its much appreciated.

  Thank you

  Nirmal

  If you use the MSSQL database, locate WebService.Ports.http in the VPX_PARAMETER table and change to the correct port.

• vCenter WebClient does not work after changing the field of vCenter Server

  Hi all

  I had to migrate my vCenter to a new domain. This migration is smooth without any problems. Everything works fine.

  Now, some of my colleagues need to use the web Client and I discovered, after to be authenticated successfully to the web server,

  I have an error message:

  Unable to connect to vCenter Inventory Service - _ https://vcenter._olddomainname: 10443

  Thus, even after reinstalling the Web server on my vCenterServer (version 5-update1) component, it always uses old domain information.

  I can't find where to change it.

  Hope you can help me with that.

  Thanks in advance,

  Frank

  Have you tried to run the command as shown in register.bat

  http://pubs.vmware.com/vsphere-50/index.jsp?topic=%2Fcom.vmware.vsphere.install.doc_50%2FGUID-9C65879E-7442-46E2-9A20-A858B2800D12.html?

• vCenter Agent does not update the host esx

  After the Victoria Cross to vCenter4, I got a message from vCenter saying the 'update cannot the specific host... ". »

  Is there anyway that I can check the version to ensure that it is the match with my vCenter and how do I update this please.

  Thank you

  You can connect to the host using ssh and run the command as root to obtain the vpxa version: "rpm - qa | grep vpxa.

  Sandeep-

• vCenter WebClient does not not error RSL # 2046

  Hi all

  I can't access vsphere web client after an RSL error,

  Below is a screenshot of my question.

  

  Can you please help?

  Thanks in advance

  There is now an article on this subject:

  VSphere 5.0 Web Client does not load and displays the error message: Error # 2046 29 with RSL (2116567)

• VCenter Service does not start

  Hi all

  I'm running Virtual Center 2.5.0 Update 2, and I'm moving to the 5 update. Well, when I started the Setup, I needed to connect to SQL, which of course, I have more. So I changed the pw in SQL and ODBC connection, but it still seems that VMWare is trying to use the old password. In the newspapers, I find the error "ODBC error: (28000) - [SQL Native Client] [SQL Server] Login failed for user '.

  Right now, I can not connect to the RC because the service is not running, and cannot find where I need to change the password to ensure that it connects using the appropriate creds. Oh, and the ODBC test comples with success.

  Where can I change that password for the service to know the SQL account to use?

  Hello.

  See if this article helps you:

  http://KB.VMware.com/kb/1006482

  Good luck!

  Post edited by: vmroyale

• Subcircuit pines are not aligned with grid and does not connect

  I have two symbols the same sub-channel.  One is fine, but the other has pins which are not line up with the grid of MS and who does not yet connect.  MS12.0.0.

  This one is very good:

  

  The pins are off-grid.  The circle will not connect.

  

  Hello

  I did experiment a little with this. One thing you can try is to open the symbol Editor, select the axis that does not connect and then the spreadsheet view, change the shape of pine of length zero. Then try and see if you can connect to the PIN in the design. It will not appear as a line, but you should still be able to connect to it.

  If this does not work, you can open a service request and we can try to see how to solve the problem.

  I hope this helps.

• Smart error display "in the grid, the layer does not exist.

  While trying to open the web forms in Smart View, we are confronted with the error "the layer does not exist in the grid.

  
  

  I tried to uncheck the columns to repress, as mentioned in the knowledge base. ( Doc ID 1490801.1 ). But still no luck.

  It happens for all the web and all the user forms. All entries will be appreciated!

  Thank you

  Steffi.

  Can ensure you that you uncheck everything under the lines to remove and uncheck the option "suppress the missing blocks.

  HTH-

  Jasmine

• vCenter 6 sees not odbc connection

  Installing vCenter 6 does not see my 64-bit dsn. I use sql 2012 database and sql version 11 of the odbc driver. any one see this before?

  problem solved. you had to use 2012 sql native client instead. SQL 11 driver version will not work

• vCenter does not start after the upgrade from 5.1 5.1 U1b (UNIQUE authentication failed)

  Hello

  We have upgrade to vCenter Server (build 880146) 5.1.0a to vCenter Server 5.1. U1b and now vcenter service does not start

  This is the log:

  2013 10-21 T 10: 58:40.221 + 02:00 [02800 info '[OSP]'] [UserDirectorySso] GetUserInfo (Administrators, true)

  2013 10-21 T 10: 58:40.221 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [GetDomains]

  2013 10-21 T 10: 58:40.252 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LazyInitAdmin] initialization

  2013 10-21 T 10: 58:40.252 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices]

  2013 10-21 T 10: 58:40.252 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CreateAdminSsoServiceContent] try to connect to the administration of the SSO server.

  2013 10-21 T 10: 58:40.330 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices] successfully.

  2013 10-21 T 10: 58:40.330 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LoginToAdmin]

  2013 10-21 T 10: 58:40.330 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity]

  2013 10-21 T 10: 58:40.330 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity] refreshing SSO token...

  2013 10-21 T 10: 58:40.330 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [RefreshSsoToken]

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 error "[OSP] [SsoAdminFacadeImpl]"] AcquireToken [RefreshSsoToken] exception: failed authentication: authentication failed

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 info '[OSP]'] [UserDirectorySso] GetUserInfo NormalizationException: RemoteGetDomainNames RuntimeServiceFault exception: sso.fault.RuntimeServiceFault

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 error '[OSP]'] [UserDirectorySso] NormalizeUserName AuthException: allow exceptions

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 error '[OSP]'] [UserDirectorySso] GetDefaultPrincipal AuthException: allow exceptions

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 info '[OSP]'] GetDefaultPrincipal(, true) [UserDirectorySso]

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 info '[OSP]'] GetUserInfo(, true) [UserDirectorySso]

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [GetDomains]

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LazyInitAdmin] initialization

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices]

  2013 10-21 T 10: 58:40.408 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CreateAdminSsoServiceContent] try to connect to the administration of the SSO server.

  2013 10-21 T 10: 58:40.439 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices] successfully.

  2013 10-21 T 10: 58:40.439 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LoginToAdmin]

  2013 10-21 T 10: 58:40.439 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity]

  2013 10-21 T 10: 58:40.439 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity] refreshing SSO token...

  2013 10-21 T 10: 58:40.439 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [RefreshSsoToken]

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 error "[OSP] [SsoAdminFacadeImpl]"] AcquireToken [RefreshSsoToken] exception: failed authentication: authentication failed

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 info '[OSP]'] [UserDirectorySso] GetUserInfo NormalizationException: RemoteGetDomainNames RuntimeServiceFault exception: sso.fault.RuntimeServiceFault

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 error '[OSP]'] [UserDirectorySso] NormalizeUserName AuthException: allow exceptions

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 info '[OSP]'] GetUserInfo(, true) [UserDirectorySso]

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [GetDomains]

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LazyInitAdmin] initialization

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices]

  2013 10-21 T 10: 58:40.502 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CreateAdminSsoServiceContent] try to connect to the administration of the SSO server.

  2013 10-21 T 10: 58:40.533 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [InitSsoAdminServices] successfully.

  2013 10-21 T 10: 58:40.533 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [LoginToAdmin]

  2013 10-21 T 10: 58:40.533 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity]

  2013 10-21 T 10: 58:40.533 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [CheckTokenValidity] refreshing SSO token...

  2013 10-21 T 10: 58:40.533 + 02:00 [02800 info "[OSP] [SsoAdminFacadeImpl]"] [RefreshSsoToken]

  2013 10-21 T 10: 58:40.595 + 02:00 [02800 error "[OSP] [SsoAdminFacadeImpl]"] AcquireToken [RefreshSsoToken] exception: failed authentication: authentication failed

  2013 10-21 T 10: 58:40.595 + 02:00 [02800 info '[OSP]'] [UserDirectorySso] GetUserInfo NormalizationException: RemoteGetDomainNames RuntimeServiceFault exception: sso.fault.RuntimeServiceFault

  2013 10-21 T 10: 58:40.595 + 02:00 [error 02800 "Default"] cannot add the default permission: user not found

  2013 10-21 T 10: 58:40.595 + 02:00 [error 02800 "Default"] cannot start allow - system has no access rule

  2013 10-21 T 10: 58:40.595 + 02:00 [error 02800 'Default'] [Auth] initialization failed: < class Vmacore::Authorize:AuthException(Authorize_Exception) >

  2013 10-21 T 10: 58:40.595 + 02:00 [02800 error 'authvpxdAuthorize'] could not initialize security

  2013 10-21 T 10: 58:40.595 + 02:00 [02800 WARNING "VpxProfiler"] ServerApp::Start [TotalTime] took ms 27456

  2013 10-21 T 10: 58:40.595 + 02:00 [02800 info 'Default'] judgment of VMware VirtualCenter.

  Hello

  VMware support solve my problem:

  We have seen two issues after the update.

  First of all, there is no user of the solution for the virtual center when I checked the application users with SSO to the webclient service administration page.

  Solve us this problem of repointing Virtual Centre to the next according to the kb SSO instance;

  http://KB.VMware.com/kb/2033620

  1. repoint.cmd configure vc - search server https://vcenter.com:7444/lookupservice/sdk - password "laquesea" - openssl-path of the user "admin@System-Domain"-"C:\Program Files\VMware\Infrastructure\Inventory Service\bin."

  After that, the modules in the vpxd.cfg solution was not properly updated and an operation manual.

  C:\ProgramData\VMware\VMware VirtualCenter\SSL\sso.crt

  vCenterServer_251703

  C:\ProgramData\VMware\VMware VirtualCenter\SSL\sso.key

  Above is the corrected version having replaced "null" with the correct path to the files of certificate and key.

  This allowed vcenter service start successfully.