Satellite P300 (Visa Office) - webcam & USB ports not working DO NOT

Similar Questions

• Satellite C50 - B - 14 d - USB ports not working not

  I have a C50 Satellite - B - 14 d and had again for about 4 months.

  I didn't know that at the time of the purchase (online) that there is no optical drive, so I bought an external.

  Trying to plug into it, discovered that nothing happened in the 2 ports on the right side (2.0 and 3.0) so I decided to try the left port 2.0.

  It does not detect the device, but it undetects then within 10 seconds, it continues to do this every few seconds it is impossible for me to access my work on CD!

  I contacted the people I bought it since then, but they say it's a matter of Toshiba?
  Can someone help to solve what I don't want to send it for repair because I can't be without him more than 2 days.

  HHHEEEEELLLLPPPPPPP!

  I put t he thinks that the s notebook issue if all the USB ports work in relation to other devices USB; That is to say the USB mouse.

  From my point of view of a few external USB CD/DVD drive could not be recognized because of the low power of the USB.

  Try to connect the CD/DVD drive to the laptop using the USB Y cable which allows to connect to two USB ports.

• Satellite L50D-B-16V - 2 USB ports stopped working

  The ports do not work with anything.

  In Device Manager it is a camera not identified in the "Other devices" section that has no driver.
  I tried to download from the site Web of Toshiba, but once unzipped it has not changed the situation.

  Much help appreciated.

  Ed.

  What have you tried to download?
  Exactly which driver?

  Try reinstalling the chipset driver and also try to identify the unknown device.
  How to do that you can read it here.

• Satellite P10-304: USB Ports not recognize anything

  I have a Satellite P10-304 and the USB ports not recognize anything that are attached to them. Device Manager tells me that they are enbaled and works correctly. What can be wrong with them or what can I do?

  Hello

  One of my friends has the same unit on the work and everything works perfectly. It uses the USB hub too and have many external devices connected to the unit.

  By the way: something like who can occur if the external device is not removed correctly use safely remove hardware option. If you try to connect any other device after that in most cases it is not recognized at all. In this case, you can restart the device or remove ports from the Device Manager and use the hardware detection to find them again.

  Good bye

• Satellite 1900-303 USB port not working - USB hub?

  Hello. Deploy a Satellite 1900-303 with two USB ports. One of the ports stopped working. I guess it's permanently broken. Just browse the site, it seems that the easient of thing to do would be to get a Port Replicator - one of them:

  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/individualOptions.do?service=UK&selCategory=4697&o ldCategory = 4697 & OPTION_ID = 95631 & toshibaShop = true & t ab = 1 #1

  I wanted to know is it just to sink my remaining a USB port, so that I get 4 USB ports (and all others)? What USB speed I would get?

  Thank you!

  Rich

  Hello

  As far as I know the unit supports USB 1.1
  So I guess if you are using a USB hub external, USB ports work with USB 1.1 properties.
  Maximum data transfer should be 12 Mbps

• USB ports not recognized anymore

  I have Vista.  USB ports and ports that accept cards camera no longer recognize them.  Scanner can be moved from USB port to the USB port and works but "Explorer" does not show that they exist.  How to recognize camera cards (mainly) as they did before?  Windows offers device (camera card) has a problem, but this isn't the case.  Card works so executed through camera (USB cable to the USB port) in two different cases with two different cameras.  Also plugged on the USP port scanner is not recognized by the function 'Explorer' but actually works very well.

  Hello ghpots,

  ·         What happens when connect cards camera on USB ports, it installs the device drivers?

  ·         What are the changes that you made to your computer, since it has stopped working.

  When you connect your devices to the USB ports, check the status of the device in the Device Manager. Check if you see a yellow fringe or exclamations in the Device Manager.

  I suggest that you remove and then reinstall all USB controllers.

  To remove and reinstall all USB controllers, follow these steps:

  1. click on start, type Device Manager and open the Device Manager.

  2 right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  3. restart the computer and reinstall the USB controllers.

  Plug in the removable USB storage device and test to make sure that the problem is solved.

  Check the Device Manager to see if the unit under section USB or other devices. To do this, follow the procedures below:

  Method 1:

  1. click on Start, right click computerand select Properties .

  2. click on Device Manager.

  3. click on the (+) sign next to Universal Serial Bus controllers and next to the peripheral plus other section.

  Look for the USB device under the Universal Serial Bus controllers, or under the other devices section.

  4. If the unit is under Bus USB controllers or other devices, click on the reference to the 'unknown' device name, and then click Uninstall to remove the device.

  5. close Device Manager, and then restart the computer.

  6. If the USB device that has problems with software and it has not already been installed, install the software, now follow the planned manufacturer of the directives.

  7 reconnect the USB device that had issues and test to see if it works.

  The unit should now work correctly. Continue if the device name is not found in the Device Manager.

  Method 2: There may be a problem with the USB port. Try connecting to a different USB port. If the USB device is displayed in Device Manager after plugging the cable in a different port, then uninstall and reinstall the software of USB device driver.

  Method 3: Check the manufacturer of the device for support if the device is still unable to display.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite Pro C650-139 - faulty USB ports

  Bought a C650-139 about 3 weeks ago and after 5 days the USB ports started working intermittently and then stopped altogether.
  Do you have a system restore and even tried to boot with a linux live cd but the machine would not recognize that it is plugged into a port.
  Contacted the dealer and they made me a shiny new replacement, but now he's gone the same way :(

  I have only 2 Kingston USB and a USB mouse that I have used in those laptops. The devices work properly in other laptops and PCs.

  The Windows Device Manager indicates the USB root hubs installed and if I uninstall them then the OS detects and reinstalls them.

  Someone else had this problem with this model?

  It is a really bad situation :-(. Can recover you your money from them to buy another model of laptop?

• USB ports not working do not. Pavilion dm4-3090se

  USB ports not working do not.

  Thanks for your reply.

  no ports were working, so I went into Device Manager, uninstalled them, re-started... and... iola!

  they were back!

  Thank you again for your answer...

  Louise

• Installation of SP2 on my Satellite Pro L10 causes the USB ports fail

  I just installed XP SP2 on my L10 and USB ports no longer work.
  There is no error in the Device Manager, the device in the USB ports are not recognized.

  I removed SP2 and USB ports are functioning again.
  Model No.: PSL15E-00H018EN

  Any suggesttions? Thanks in advance.

  You simply remove the USB controller from Device Manager.
  After that the new charging USB ports should work again!

  Also see this MS article:
  http://support.Microsoft.com/kb/892050/en-us/

• Re: Satellite L300D-242 - multiple problems, usb ports, some keys on the keyboard

  Hello

  I'm having some problems with my computer laptop sateliite, everything worked fine until I changed the operating system from windows vista to windows 7 and now my USB ports arnt working, sometimes they work and sometimes they are not but its never the same one that works he constantly of the changes, also on my keyboard the game Skip, stop, mute buttons have stopped working.

  Can someone help me please?

  Thank you

  Hello

  To get to play, pause and other buttons works, you need to install the VAP (value added package).

  The USB ports are controlled by the chipset, so I recommend you to install the chipset driver to get this resolved.

  I hope this helps a little

• Equium A60 - 692 USB Ports not working not

  Hi all - new to the forum and what a good place to find info on Toshiba laptops. Anyway - after a recent storm, I lost connection to my ISP broadband - contacted the helpline who advised me to Exchange my ADSL modem to an Ethernet - made and corrected the connection problem - however - only after having it done I realize has none of my devices (printer, camera, Web Cam etc.) worked via the USB ports. I've uninstalled and reinstalled the system and drivers for devices without result. The device displays 500ma of power manager is available for each of the 3 ports but watch 0ma used. The Device Manager also shows that the USB ports are working properly. Can someone help or advise if these ports on a separate card or they are part of the motherboard. If Yes, where can I get a. Congratulations to all - Andy

  A lighting strike is not good news, if she gets hit by a kind something can go wrong. My guess is that your laptop USB ports has taken suddenly by a massive power surge that probably damaged the chips inside. It could be a Windows problem, or not the only thing I could suggest is to use a bootable Linux such as Knoppix CD and run a command called usbview with some USB devices.
  If the USB has been confirmed dead then your only option is to use an adapter CardBus USB 2.0 providing your CardBus slot is not damaged too.

  Richard S.

• Satellite P850 - right USB ports stopped working

  I have a new P850 Satellite, after a short period, that the two right usb ports stopped working, I had only a wireless mouse connected to them at the time. Is there a reset for these ports, I tried to uninstall and reinstall, no change.

  Anyone has any ideas.

  > I tried to uninstall and reinstall, no change.
  What have you tried to uninstall or reinstall?

• 8.1 Windows 64 - bit 3 USB ports not working not

  I have a model computer T430s 2352CTO, running Windows 8.1, 64-bit version. Before upgrading Windows 8.0 all drivers have been updated. The USB ports 3 worked properly, in particular an external hard drive of 1 GB running. After the 8.1 update, 3 USB ports work always, but only for about 30 seconds, then the hard drive stops. The power led remains on the hard drive, but it no longer displays in windows Explorer.

  In Device Manager, I'm gone to Bus USB-> USB controllers Root Hub-> properties-> (under general it says "this device does not work correctly)-> Power Management-> unchecked the box"allow the computer to turn off this device to save energy. Unfortunately, it doesn't seem to stop the problem. Any ideas?

  Please try this:

  http://blogs.msdn.com/b/usbcoreblog/archive/2013/11/01/help-after-installing-Windows-8-1-my-USB-DRIV...

  Thank you!

  Houman

• Pavilion p7 - 1380t: USB ports not working not

  The two front USB ports do work not today. Worked fine yesterday. Everything I plug is not coming. Using ports in the back, they work very well.

  Someone at - it ideas about the problem and a fix?

  Thank you

  Hello @xploded16,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how the front USB ports on your desktop computer do not work, and I'd be happy to help you in this case!

  To enable your system to recognize the USB ports before once again, I recommend that you follow the steps described in this document on Troubleshooting connections USB (Windows 7).

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning

• HP Pavilion G6-2146sl: HP Pavilion G6-2146sl left USB ports not working not

  Hi, I have a HP Pavilion G6-2146sl with Windows 7 Ultimate x 64... my problem is that the two left USB ports stopped working properly: for example, when I insert a USB flash drive lights up but it is not recognized by Windows. Is the only port that works on the right side of the laptop. I tried to do a search of driver, but Windows cannot find driver. Here is a screen of my Windows device management:

  

  Thank you in advance for your help and sorry for my bad English, I'm Italian.

  Hello

  AMD AHCI, USB 3.0 chipset and RAID drivers