View Manager does not load at startup (Windows 8 - confirmed activated in the Task Manager / start)

Similar Questions

• A drive mapped on P to P does not load at startup upward.

  My question is similar, but may have a different answer.  I have a peer-to-peer network and my computer plays the main role.  In the morning he gets turned on first so that other computers can charge the player.  Some of my programs require that the mapped drive is the same on all computers like me.  The problem is that when I turn on my computer, it does not read the drive mapped on himself and he listed as disconnected.  I then manually go and plug.  Again, it is annoying more then anything.  Any suggestions?

  Hi Loreman,

   

  Thanks for posting your question in the Microsoft Community.

  From the descriptions of the question, it seems that mapped drive does not load at startup to the top.

  I imagine the inconvenience that you are experiencing. I'll help you fix the problem.

  Follow the methods and mark the question below:

  Method 1:

  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

   

  Method 2:

   

  Drive mapped to the network connection may be lost:

  http://support.Microsoft.com/kb/297684

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

   

  I hope that the information above helps you.

  Your response is very important for us to ensure a proper resolution.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

   

   

   

• In my laptop that is Explorer.exe does not load at startup on my account, his work with the guest account. Also it does not manually with the new process. Kindly help out me

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: in my laptop is Explorer.exe does not load at startup on my account, his work with the guest account. Also it does not manually with the new process. Kindly help me.

  I have seen at redistry Edit it's explorer.exe in winlogin sell attribute.

  Hi HiteshAstan,

  one) don't you recall making any changes to the computer before this happened?

  (b) what exactly happens when you sign in to your account?  You get a specific error message?

  Step 1: Let us check if the problem persists in safe mode

  Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. In the advanced startup options select safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

   

  If the problem persists, you can deduct that the user account is corrupted

  Step 2: Create a new administrator account and then try to repair your user account

   

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  After the back if you have any questions

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 does not load, is sitting on a black screen with the mouse arrow.

  I loaded several times and even used the repair option still does not load past this screen.  Looks like it should be on the page of actual windows, but nothing.  Have to restart the computer at this point.  He will continue to try to reinstall windows 7... cannot use same cause recovery F10 it says something about a partition... I have no computer!  What is going on???

  Hi all

  Thanks for posting. If I understand your messages is correctly appears that your facility will not start even to load. If this is the case, then you probably bad media. I would either re - burn your DVDs at a slower speed. If you got your DVD with a company I contact the seller and request additional media.

  I hope this helps!

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Explorer does not load at startup

  I tried fixes registry, removing hardware and software keys, start safe mode, sfc/scannow to replace windows files, system to several restorations, virus scans with AVG and ESET (I removed ESET later as I learned two could lead to conflicts, but always this error) anti-spyware and bad-ware, comboFix, CCleaner, using different internet browsers, using the Task Manager to start Explorer.exe a copy of Explorer.exe work from another computer, reinstall windows.

  This PC is absolutely crucial for the completion of the work, but none of these options did nothing. Programs will work perfectly, what is the problem with my system?

  Have you tried to make a start for explorer.exe entry? Access

  My Computer\HKEY_CURRENT_USER\Software\Micrsoft\Windows\CurrentVersion\Run

  in regedit and do a right-click on the page when you view the execution folder and
  Click on the new channel. Name the string explorer.exe and paste in the data
  C:\Windows\Explorer.exe and then press OK and restart to check.

• Standard VGA driver does not load when reinstalling Windows XP

  Reinstalled Windows XP on my computer, but he doesn't not load the driver VGA Standard - so I can't install the video driver ATI Radeon x 600 for my graphics card.

  In Device Manager, it shows (in yellow) in the other devices section, "Video controller (VGA Compatible)".  I tried to update / install video driver with the Windows XP installation CD in the disc drive, but whenever he says, can not update material.  Whenever I start, the Found / installing the new hardware box arrives, but after a search, he finds no driver to install the video card.

  Of which I did some research on the web, I need to load the Standard VGA driver before adding any other drivers (IE, ATI Radeon x 600 video driver) - but Windows XP does not say the driver VGA Standard of its installation disk.  Help!

  I have not yet tried reinstalling Windows XP again, FYI.

  Hi people,

  You could try to remove the "video controller" in the section other devices in Device Manager, then restart the computer.

  Who needs to be reinstalled card generic video driver.

  However, if you have the correct video card driver, you should be able to reinstall this driver from Device Manager.

  Right click on "Video controller" entry and go to the "updated driver software".

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The user profile does not load at startup - vista help

  When I turn on my computer and choose me as the user (which is the only user he is listed on the computer), I get an error messgae saying: unable to load the user profile...

  How can I fix it?

  Thanks much for the ideas! really enjoyed

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• Dolby audio driver does not load after upgrade Windows 10

  Just upgraded to 10 Windows on my Ideapad N585. At the start, get a Dolby audio driver has not loaded. I recall this issue upgrade to win 8 to 8.1, but can't remember the fix. Should we wait for an updated driver? I have sound, but do not know what driver it uses. (have not yet found drivers yet)

  Another question, I discovered, is that I could not disable the touchpad through Fn + F6. The driver settings momentum have a box to disable the touchpad when an external pointing device using, however, so this isn't a major problem.

  Thanks - I think that I managed to update the driver for the device (which was not so easy to find) Manager - who or Windows Update done automatically. He now works properly again. I have a feeling I'm going to repeat this exercise a lot with Windows 10.

• Custom mouse pointer scheme does not load at startup

  I am running windows vista Home premium and I downloaded a mouse on the internet system. I saved the regime as "smooth" and clicked on apply and it worked. But when I restarted my computer, the system of mouse returns to the plan original windows vista aero. I've tried to stop all non-microsoft msconfig services and disabled all services start and enabled in the well, but yet the scheme has not been loaded.

  balingsta,
  Thank you for visiting the Microsoft Answers community forum.

  If your mouse is a Logitech brand, it deals with the issue.    If this is not the case, let us know what you have the mouse and we will try to help you solve this problem.

  This should solve your problem:

  1. click on start, type "msconfig" in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  2. in the System Configuration dialog box, click the Startup tab
  3. Locate the entries called KHALMNPR or similar and uncheck the box next to each of them.
  4. click OK and restart your computer.
  5. after the restart, change your mouse pointer, the way you want and restart again.  Your mouse settings remain the same.

  Let us know if this information was useful or if you need assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP LaserJet Pro CM1415fnw: LaserJet Pro CM1415fnw does not load at startup

  I'm having a problem with my printer not initialize correctly. When I turn on the printer, I get a blue screen with HP logo in the upper right corner and a loading downstairs bar. The loading bar stops at halfway through the load and crashes. I let stand overnight by train to load nothing doesn't. I unplugged the power supply for 10 minutes and tried to restart it after that. I've disabled my wireless network and tried to restart it.  I tried to do a hard reset facorty holding the lower right of the screen as it is to start. I tried to update the firmware, but my PC does not see the printer on USB or wireless. What is the blue screen of the printer of the death? Any suggestions would be greatly appreciated.

  Hi @FrankySmutta,

  Welcome to the Forums of HP Support! I read your post and to see that the printer will not start completely. I will do my best to help you with this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  I'll send you the correct reset of the printer, in a private message.
  In the forum next to your handle name simply click on the envelope to see.

  Please let me know the results and if there is anything else I can help you. Thank you.

• Acrobat PDF Addin.dll Filemaker does not load at startup upward

  Filemaker Addin PDF will not meet the reactive in word 2007 running on Vista. I find the winword.exe and open as administrator and checked the Acrobat PDF addin, but this action does not resolve the problem. This issue applies only in word. PDF filemaker works in Outlook and Excel fine.
  When I try to correct the problem through Word, Options, Addin, locate the add-in disabled, highlight and use Comm Addins, I continually get a messahe for error that says add it's loaded and available, but are only accessible by the administrator. My journal is as administrator, so I guess I have a little problem of system somewhere. The PDF Maker/Office/PDFMofficeaddin.dll file was located in the 'C' drive in the folder program files for office.

  Please repost your question in the Forum program: http://social.answers.microsoft.com/Forums/en-US/vistaprograms/threads where people who specialize in obtaining other than Vista and IE to work programs will be more than happy to help you with your problem.

  If they cannot help you, try posting in the Discussion of the Office group at: http://www.microsoft.com/office/community/en-us/default.mspx?dg=microsoft.public.word.docmanagement&lang=en&cr=US where the people who specialize in Microsoft Word may be able to help, even if the problem is with Filemaker PDF (since it is a complement and works closely with other office products).

  I hope this helps.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• T500 fingerprint reader does not load at startup (blue screen)

  I have 2081CTO T500. Provided natively with Vista Home, but I reinstalled with XP Pro SP3. All the latest updates are installed both drivers and windows (as of March 12, 2010).

  I've had this laptop for about a year and the fingerprint reader to work properly. A few months ago it stops working for some reason any and I stoppped using it. I finally had time to reinstall the whole windows and installed. It worked well for about a day, but today I was using my computer and it suddenly froze unanswered. I turned off and when I walk back, the fingerprint sensor would not load and a blue screen came up with an error that a failure to boot and windows kept just restart at this stage and display the same message. I password protected journal and had loaded all ten fingers to use during the connection (not the Welcome screen).

  I tried power cycling, did not work. Subsequently had to connect via safe mode, disable the fingerprint sensor to connect and then reboot in normal mode to be able to connect without the Blue error screen. I tried updating the BIOS, did not work. Reinstalled the sensor of fingerprint, again the same problem. I also reset the fingerprint sensor in the BIOS and reinstalled the software, but still the same problem. Basically now I use the home screen and in this way, that I don't get the Blue error screen. It just continues to show as if the sensor is train load, never happens, so I just put a password and enter. I remember that some months ago, when I had a problem, it was similar. It worked fine, but when I turned off the Welcome screen, I suddenly had a problem with the sensor that was not resolved until I reinstalled windows. Now that I think of it, it could be the same disabling the Welcome screen things screwed up again.

  Could someone please explain what is happening? Why are there so many problems without the windows welcome screen? I know that the sensor works very well because when I am trying to scan my fingers or even connect to Thinkpad security systems, it works fine. It's just windows connect you that is screwed. I can't go back again to work at least with the Welcome screen. I'd appreciate any help.

  After a few bars, I isolated the problem to the personal firewall. I changed the settings and fingerprint reader worked very well. I hope this will help someone in the future.

• the digital camera driver does not load when a sony camera is connected to the computer vista laptop.

  At the same time the downloaded movies netflix has more audio.  Device Manager does not display a driver of the camera when the camera is attached via firewire and running?  I tried to reload the drivers and worked with the pilot web-based updates.

  Hi mstradt,

  1. which version of the operating system are you using 32-bit or 64-bit?

  2. What is the model of the camera number?

  3. you try to use the camera of Sony for the first time?

  4. How do you try to connect the camera?

  You can first try connect the camera with the different port and check if it is detected.

  Also try to use only Sony 4 firewire cable 4-pin to connect the camera.

  You can also visit the following links and see if it helps:

  Can what types of connections and digital video cameras be used to import video?

  http://Windows.Microsoft.com/en-us/Windows-Vista/which-types-of-digital-video-cameras-and-connections-can-I-use-to-import-video

  Troubleshoot camera connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-camera-connection-problems

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• BlackBerry completely exhausted Z10 battery does not load when 10 BlackBerry smartphone is connected to the charger or usb

  Hello

  I have a BB Z10, two days ago, while the travel battery got completely exhausted and the phone got turned off. later, I connected to the BB charger and the phone does not charge, I tried to connect it to the USB, but it does still not load... just a constant red light nod. I tried to remove the battery for 2 hours and back and not luck it is plugged. Like I need my phone works, I tried to go to a service center but not able to locate one on the BB site, I bought a new
  BB Z10 battery and it worked fine. I went back to my place and it took about an hour for me and yet once again, the battery discharged and I am with the same problem now. Now, when I connect my Z10 to the computer (windows 8.1) I get a red + green slow light flashing and after say 20 minutes, it connects to the computer and the phone turns... and when I see the phone it says Exiting battery saving mode"" immediately followed by "turning off the appliance" and it loops constantly. "

  Help, please!

  It's weird, but not the first time I heard of this.

  See this: http://www.blackberry.com/btsc/KB36747

• Install flash does not do anything and should be used to close the Task Manager.

  For a few months now, I tried to update Flash Player, every time I tried I would get the installer to come and it displays black background there bar none download or any text. I thought that the problem could be something to do with the version of Flash installed on my computer already, then I uninstalled the thought if I just installed the latest version, there would be a problem. Now I'm stuck without Flash at all on my computer and the installer still does not. What is the solution to this?

  Please try the installation offline programs:

  Internet Explorer:

  http://fpdownload.Macromedia.com/pub/flashplayer/latest/Help/Install_flash_player_ax.exe

  Firefox and other NPAPI browsers:

  http://fpdownload.Macromedia.com/pub/flashplayer/latest/Help/install_flash_player.exe