Dolby audio driver does not load after upgrade Windows 10

Similar Questions

• HP Laserjet 2100 does not work after upgrade Windows 10

  HP Laserjet 2100 does not work after upgrade to Windows 10. Tried using PCL 5, PCL 6 and also tried the HP Universal print driver. I agree, this is an old printer, but I am disappointed told me "the printer is in error" when I try to print after this upgrade. Worked fine on Windows 7...

  Thank you!

  If the printer is connected using a parallel printer cable, please see the link below for the solution.

  http://h30434.www3.HP.com/T5/LaserJet-printing/possible-solution-to-LPT-port-issues-with-Windows-10-upgrade/TD-p/5372582

• IPhone 6 Plus does not load after upgrading iOS 9.3

  Hello!

  given that I've updated the iOS to 9.3, the phone does not.  The only way to do is to turn off completely.  And it charges very very slowy (5% per hour).  I also used other chargers for iphone genuine and it's the same thing.  The battery down too quickly (10% per hour). And sometimes, the battery goes down 7-8% in a few seconds.  It was perfect before the update but not anynore.

  I have exactly the same problem.  There are many of us that do. I need my phone for work and it is a huge problem, because it won't hold a charge and does not load.

• Venue 11 7140 pro micro HDMI does not work after upgrade windows 10

  Has anyone tried connect a HDMI microphone on their place of dell 11 7140 pro after windows 10 upgrade? Mine does not work after the upgrade, but the HDMI from the dock works.

  I have thus display driver problems on 10 to win.

  For me, the micro HDMI port works fine. I use an active adapter, so that could make a difference.

  The HDMI on the dock works well, but only if I directly connect to an HDMI display. If I try to use a passive DVI adapter, then the external screen is not recognized. In addition, the DisplayPort on the wharf is also unnecessary, regardless of the type of cable or attached monitor.

  I encounter this problem after performing a new installation of Win 10, using the brand Dell drivers and latest drivers Intel installed by Windows update.

  It is certainly a driver problem Win 10 because everything works fine if I boot the Tablet under Linux using a USB key.

• Pavilion p6210t: CD/DVD HP Pavilion p6210t drive is not recognized after upgrade Windows 10

  HP Pavilion p6210t DVD/CD drive is not recognized after the upgrade to Windows.  DVD/CD material is: LightScribe16XmaxDVD + / R/RWSuperMultidrv.  I can't find an updated driver for this device, download and install. Thanks for any advice you can provide.

  Thank you for your response.  I can't find somewhere - it now despite a lot of research - I read on a very simple solution to this problem which is (was) affecting hundreds of users HP.  In essence, the solution said that the DVD drive has in fact been recognized [as evidenced by his appearance in the BIOS] but has been "identified" and how to fix this problem was to go into the DEVICE MANAGER and delete the incorrect identification reference - then restart the computer and Windows 10 would correctly identify the DVD player and correctly in the DEVICE MANAGER list.  I decided to try this simple fix before one of the more complex solutions that were offered.  The simple solutioon worked! 

• Sound does not load after upgrading to El captain

  Hello

  After upgrading my iMac (late 2009) to El captain the sound no longer works. Trying to open the preferences-> the error message appear that this could not be loaded. Other sounds associated with apps like audio / midi set up crashes.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Audio does not work after upgrade Windows 10 (Lenovo G780)

  After my upgrade to Windows 10 on my Lenovo G780, it seems that my audio no longer works. I tried plugging my headphones as well to see if I had audio coming through here, but it does not appear in the peripheral reading window when it is plugged.

  The laptop comes with Conexant SmartAudio HD and lists also high definition Audio device in Device Manager.

  Could someone help me and let me know if there is a problem that I monitor.

  I found a page that contains some Conexant software for windows 10 but I don't know if they are updated drivers or if they support even my machine (the page does not support for G780 list).

  Any help would be appreciated. Thank you.

  After a few tries, I finally got my audio to work and hope it does for you too. What I did close my computer completely as opposed to stopping in the hybrid stop mode. To stop your computer completely, right click on the Windows Start icon and scroll down until closing or disconnect and select stop down in the list. Your computer shuts down completely. Turn on your computer again (start will take a little longer than usual) and check if everything is in order.

  As I mentioned earlier, my audio back after doing this. It will be useful.

• Audio driver does not work after reinstalling XP on Tecra M9

  Hello

  After much fighting, I gave up. It's imposible to get my sound card upward operation on my TECRA M9 PTM91E, after I decided to renounce a cleaning by formatting the drive completely. My procedure is as follows:

  1 WINDOWS XP SP2 installed
  2. downloaded all drivers on another pc. Downloads of official pilot of toshiba site: http://es.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=ES
  3. install drivers in the correct order, following the instructions: http://es.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/tracker.jsp?file=http%3a%2f%2fsupport.toshiba-tro.de%2ftedd-files2%2f0%2finstall-20070918164527.zip
  4 no luck when you try to install the sound card driver (download page specifies a built-in realtek) first try the suite version: http://es.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/tracker.jsp?file=http%3a%2f%2f81.27.174.52%2ftedd-files2%2f0%2fsound-20071002102843.zip
  5 messed around trying the older drivers of other laptop TECRA M Series, luck is.
  6. has decided to map its just might not be a Realtek and tried other models on the download page: Sigma and Analog Devices Inc. tried those but come back an alert of recognition.

  Someone had this problem as well? My best guess is that it's just maybe a problem with the version of the driver...

  Hi guys

  I think I have an answer to your problems small software ;)

  The Tecra M9 certainly supports the ALC262 Realtek High Definition Audio.
  Compatible audio driver can be downloaded from the Web from Toshiba site or the Web to Realtek site.

  OK now to the solution

  The solution is very simple.
  You must first install the two XP patches; KB888111 and KB835221
  This must be done before installing the audio driver.

  Usually, this should solve your problem

• Satellite L650d-120 does not load after upgrading the BIOS 1.7

  After upgrading the Bios up to 1.70 my laptop is no charging current, but always works to the AC adapter.
  Can I do something on my own?

  Hello

  First of all, you should set the BIOS to default settings and need to save the changes.
  You must also leave the AC adapter plugged into the laptop for a longer period of time.

  Welcome them

• Pavilion 23tm: 23tm Pavilion touchscreen does not work after upgrade Windows 10

  After the upgrade to Windows 10, my monitor touchscreen Pavilion 23tm lost touch.  I looked for a driver on the HP site and it required me to download the HP Support Assistant application.  In other words, the site would not just download an update to the driver.  After you download HP Support Assistant and running this application, he did not find the Pavilion 23tm monitor, then I hit a dead-end.  I think I just need to be able to download the latest driver, but the HP site will not allow it.

  Hi there @jazzquilt,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are having problems with your touchscreen after that upgrade to Windows 10 and that you have installed the HP Support Assistant for help, but the problem remains. I'm happy to help you.

  The research of the model of the screen, I found a driver Windows 10, below the link. Give it a try, if you have not already.

  HP 23tm LCD Monitor - driver Windows 10

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Standard VGA driver does not load when reinstalling Windows XP

  Reinstalled Windows XP on my computer, but he doesn't not load the driver VGA Standard - so I can't install the video driver ATI Radeon x 600 for my graphics card.

  In Device Manager, it shows (in yellow) in the other devices section, "Video controller (VGA Compatible)".  I tried to update / install video driver with the Windows XP installation CD in the disc drive, but whenever he says, can not update material.  Whenever I start, the Found / installing the new hardware box arrives, but after a search, he finds no driver to install the video card.

  Of which I did some research on the web, I need to load the Standard VGA driver before adding any other drivers (IE, ATI Radeon x 600 video driver) - but Windows XP does not say the driver VGA Standard of its installation disk.  Help!

  I have not yet tried reinstalling Windows XP again, FYI.

  Hi people,

  You could try to remove the "video controller" in the section other devices in Device Manager, then restart the computer.

  Who needs to be reinstalled card generic video driver.

  However, if you have the correct video card driver, you should be able to reinstall this driver from Device Manager.

  Right click on "Video controller" entry and go to the "updated driver software".

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Pavilion does not start after upgrading Windows 10

  (Sorry for my bad English)
  Last night I started to update my HP Pavilion Windows 8.1 to 10, but I have a problem, because today, in the morning, the update was 99%, and it ended, just after I have shut down the computer and is going to school and when I got home, I turned on my HP and the problem was that the HP logo appeared and he began to load , but he didn't only show anything else than that, so I thought I'd let load after 3 hours, it was still loading and it was reseting every 5 minutes and now I just can't not try windows 10. Help?

  Hi there @lmao1,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that once you tried to upgrade to Windows 10, now stuck on the HP Logo at startup.

  If the computer hangs at the HP logo screen, try to clean the vents from the computer to the air and then restarting the laptop.

  Please note , remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Have you tried a hard reset?

  Have you tried to Test for hardware failures?

  Are - that you receive error messages or error codes?

  You happen to see a blue "option ' screen at all? '"

  Follow these steps to remove and reinsert the memory modules for troubleshooting:

• On Toshiba M505-S4940 computer microphone laptop does not work after upgrade Windows 7...

  I bought this laptop in July and it came with a free upgrade to Windows 7. Until I upgraded my cell phone, my microphone worked fine, but since I installed Windows 7, the computer does not recognize the microphone as a device. I looked for answers on the Web from Toshiba site, but nothing has worked. What is the problem with my microphone?

  Hi jillibeans34,

  Thanks for posting. Here is a link to the drivers of Toshiba. Download the sound and drivers of Toshiba Speech system. If you're still having problems, please contact Toshiba to see if they can provide you with the correct drivers.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=SB&OS=&category=&MOID=2346345&RPN=PSMG2U&modelFilter=M505-S4940&selCategory=3&selFamily=1073768663

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Plugin Flash does not load after upgrading to 40.0.2

  Firefox recently Auto-setting 39.0.3 to 40.0.2 on two of my Win7 machines up-to-date. After the upgrade or machine could load a radio station Flash stream. Relocation of 39.0.3 returns to normal streaming.

  Flash stream is called from the home page of the station using this URL:
  http://Player.StreamTheWorld.com/Liveplayer.php?callsign=KTWSFM
  The home page is: www.thetwins.com

  The call opens a new FF window and the stream starts to load but stall on a gray screen. There is no error message.

  I tried to update both the Shockwave Flash and Adobe Flash play plugins to the latest version but it has not fixed the problem of data flow.

  FWIW, I have not tested with other Flash web content.

  It would be great if it could be repaired.

  You can try to dom.ipc.plugins.asyncInit the value false Subject: config page.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• Mail application does not load after upgrade ios 9.3.2

  After the upgrade to 9.3.2 my mail app won't load. It will open briefly, and then close by itself. How can I solve this?

  Hello

  There are 2 cases for your problem; It is a software bug or that you have received an email that cannot be 'understood' by iOS, bringing to the app logon failure (this had already happened with messages about iOS 8). I suggest you reboot your device and see if your problem is resolved. If this isn't the case, then I fear of having to wait for an update and connect you to your email on safari...

  I really hope that your problem is solved!

  iPad 2 Air, iOS 9.3.2