View msg: "the record books" has been created

Similar Questions

• My hard drive to the mac book has been altered and after repair, I had lost a large part of my software. How can I recharge my creative cloud software.

  My hard drive to the mac book has been altered after spilled coke on the keyboard and I lost much of my software - how can I reload the software creative cloud - E

  Download and install the application of cc Download Adobe Creative Cloud apps desktop | CC free trial Adobe

  Use it to install your adobe programs

• Find the number of times that the recorded session has been seen?

  Is it possible to find the number of views in Adobe Connect once a recorded session has been made public? Under the dash of meeting it keeps track of these views for 30 days, but I can't seem to find anywhere in the reports where to find this information.

  If you move recordings to the content library, then you can take the standard content reports, which will display the number of views.

• After completing the download of a file on my computer, Firefox zip active Microsoft Excel to extract the zip file (which obviously does not work) - and I can't "debug" the problem because the download folder has been created by Firefox

  When I download ANY files on my computer (Windows XP), Firefox opens its ' own record (with Firefox icon); and displays the file name and a progress bar when file downloads - end with no zipped files NOT, as in no .zip or .7z, Firefox just stops (unless there is a process of "autonomous activation" in the file, such as an installation wizard)-it runs correctly.

  However, when it is a zip file, MS Excel is enabled - Excel says 'unrecognizable format' - I have plenty of "-cancellation).
  It has been produced for at least weeks - it just me is appeared that this started when I upgraded to firefox 8.0 (but not positive) - yesterday, I've upgraded to Firefox 9.0

  View > toolbars-> Uncheck Menu bar

• How to make a backup of the reports that has been created/generated on the grid

  Version grid = 10g
  Database version = 11g
  
  Reports was created inside the grid (report tablespace_usage), is there a way to do that effectively save? Now, I do it manually, by selecting each report and then saving them as a word document. I still have 200 reports to go. Any help would be appreciated.
  
  Concerning
  Dexter

  One possibility is to simply add another email address to the list of recipients for reports that goes to a read-only shared mailbox or a mail deposit box and leave the backup on the e-mail server to take care of it.

• "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. »

  Hi all

  I copied a video to holiday on a Virgin DVD + RW but when I try to play on the same laptop where it was copied from, I get the message "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. "Any ideas please? I can normally play DVD pre-recorded ok.

  Thanks in advance.

  Hi all

  I copied a video to holiday on a Virgin DVD + RW but when I try to play on the same laptop where it was copied from, I get the message "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. "Any ideas please? I can normally play DVD pre-recorded ok.

  Thanks in advance.

  =====================================
  DVD Maker might be worth a try:

  Windows 7 - burn a video DVD with Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker
  (Windows 7 Home Premium / Professional / Ultimate / Enterprise)

• When I start the Director I get "the collection of files its not valid or its corrupted. A new empty collections file has been created ".

  I've been using Director windows 2.6 on my operating system from vista for several months.   I just did the upgrade to windows 7 and now I get this message.

  "The collection file is not valid or its corrupted." A new empty collections file has been created "."

  Then, it closes the program.

  I had to rename a file called FFDshow.ax to another program called Muvee AutoProducer 6.1 works but I do not see how would the file collections of this program.

  Help, please.

  Thank you...

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Media Player cannot play the DVD. The disk has been created in a way that the player does not support

  Original title: error reading from a photo cd

  Error message "Windows Media Player cannot play the DVD. The disk has been created in a way that the player does not support"when the disc is inserted into the PC HP Touchsmart yet he plays on the laptop.  Help please

  Hello

  (1) what is the file format of the photos on the CD?

  (2) you are able to play another CD/DVD on this computer?

  (3) have you made recent changes to the computer before the show?

  (4) is it a Blu - ray disc?

   

  Install the codec for Blu - Ray. Your Blu - ray player should have come with a medium containing the codec. You can also use your favorite search engine and free research Blu - ray codec.
  The Blu - ray disc format is not supported in Windows Media Player. To play a Blu - ray disc, you must use a non-Microsoft program that supports Blu - ray playback and a device that can play Blu - ray discs.

  If you have a program that supports Blu - ray, then I suggest you to use the Troubleshoot utility and check for the issue.

  You can try the following methods and check if it helps.

  Method 1: Play a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-Player

   

  Method 2: Types supported by Windows Media Player files
  http://support.Microsoft.com/kb/316992

  NOTE - using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

   

  I hope this helps.

• When I try to read Blu - Ray, it says "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. »

  Original title: Blu - Ray

  My computer can read blu - ray, but when I try to play one, it says "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. "How should I do?

  Hello
   
  The Blu - ray disc format is not supported in Windows Media Player. To play a Blu - ray Disc, you must use a non-Microsoft program that supports playback of Blu ray and a device that can play Blu ray discs.
   
  See the article mentioned below:
   
   
  Read a CD or a DVD in Windows Media Player: http://windows.microsoft.com/en-us/windows7/Play-a-CD-or-DVD-in-Windows-Media-Player
   
  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Windows Media Player 12/Windows 7; Why my computer says "Windows Media Player cannot read the Blue Ray Disc. The disk has been created in a way that the player does not support.

  Why my computer says "Windows Media Player cannot read the Blue Ray Disc. The disk has been created in a way that the player does not support "?  I have Windows Media Player 12 and it comes a new movie.  I can play other discs blue ray on this computer, but not this one.  Is there an update that I'm missing or a codec I need?

  Thank you

  This new film format is not supported by Windows Media Player, here is a link on how to play a dvd on windows media... player and codecs...

  http://windows.microsoft.com/en-us/windows7/Play-a-CD-or-DVD-in-Windows-Media-Player.

  If you can not play... try using third-party codecs, but at your own risk :D

  Hope this helps you :)

• Can embed you fonts in a pdf file after that the pdf has been created? I received a PDF of an another designer, made a few minor corrections, and now the printer cannot be used because the original pdf didn't have all fonts embedded. Any ideas?

  Can embed you fonts in a pdf file after that the pdf has been created? I received a PDF of an another designer, made a few minor corrections, and now the printer cannot be used because the original pdf didn't have all fonts embedded. Any ideas?

  Use the Acrobat Pro preflight!

  To incorporate the missing fonts in Acrobat Preflight profile will incorporate the missing fonts in your PDF file assuming that:

  (1) the fonts in question are installed on your system and

  (2) the police themselves is not protected against the incorporation (they can at least see and print incorporation.

  -Dov

• Catalyst business for web hosting, the site has been created in Dreamweaver, it can change it in BusinessCatalyst?

  So if I have my customer buys Business Catalyst for web hosting, and its Web site has been created in Dreamweaver, can she change in BusinessCatalyst? If this is not the case, how can she change his Web site? Should I get a sort of extension for Dreamweaver?

  Or even not at all, it must integrate specific widgets and allow the browser edition by Muse and BC account settings, but this process is limited of course. You cannot change the structure of the page in this way, simply replace some text and images. Otherwise the only way to get fully editable character uses a dynamic system with a database, HTML files not individual, that would of course render expensive account BC pro with all the trimmings, but you still work in the frame. Anyway, without more information about what really needs be editable person cannot counsel specifically.

  Mylenium

• Currency of the line has changed since the user interface has been made on creating

  Hi all
  
  I'm ' currency of the line has changed since the user interface has been made. " The key to the planned line was oracle.jbo.Key' error on create action. Use case is simple. He saw table and create a button. When I click the Create button, I get this error. Back button of the browser is never used.
  
  The strange thing is that I don't get this error when I run my application on your premises. However, after I had it deployed in real development environment, he started up this error and I do not get this error on other pages.
  
  JDeveloper Version: 11.1.2.2.0 (JSF 2.0)
  Weblogic Version development environment: 11.1.1.6
  
  Kind regards
  Anil

  Same question: do you have the correct version of the runtime ADF your server?

  Timo

• I'm trying to upgrade a site from Muse and it keeps telling me that the site has been created with a different version of Muse. I have updated Muse and still can not access the site to make changes.

  I'm trying to upgrade a site from Muse and it keeps telling me that the site has been created with a different version of Muse. I have updated Muse and still can not access the site to make changes.

  Hi rgarden95,

  Can you please confirm the exact version of Muse, you open the file with?

  To check the version of Muse, please click Help-> on Adobe Muse CC.

  Kind regards

  Akshay

• How to record on the mixing in mono, 0 db reduction in volume in mp3 64 bps? Sounds simple, but about all the support staff has been able to do.

  How to save on mixing in mono, 0 db reduction in volume, (same volume as in the files-no - 3 dB reduction) to MP3, 64 bits/s? Sounds simple, but about all the support staff has been able to do.

  Several solutions to this problem.  I think that we have discussed on the support email, but I will share this new here so that he can help others as well.

  Firstly, as I have explained in the e-mail, default, hearing support right Pan that prevents content mixed to a stereo field centre to be stronger than the same worn out content far left or right.  This provides one - drop 3dB to center the content by default, but you can disable it completely by entering Preferences > multitrack and by setting the Mode panoramic default to left/right cut (logarithmic)

  

  Now, when you create a new multitrack session, there is an option to specify the captain multiplexing.  Here, you can select Mono, stereo or 5.1 and it will be the mode of multiplexing by default for a mix of base operation regardless of the content of your video, but can be overridden when you export a mix of session.

  

  Then, if you choose the menu item multitrack > Mixdown Session to the new file... always by default is the captain of multiplexing.  This command does not write to disk, is a not preview or pre-processing.  If you want to export your mix multitrack session directly on the disc in the desired format and multiplexing file, use the command file > export > multitrack mixer > whole Session... You will have then the full set of output options, including the entire line output option that you like and the format you prefer.

  

  Here, I have disabled by default 5.1 output and selected a Mono mix instead.

  

  I've now changed the parameters of format as well as MP3, 64K.

  With most of these configuration details, you only need to define their time and they will remain the default values for subsequent projects, except change again.  The dialog box export a multitrack mix will reset the mix options to match the default output and the MP3 settings can be updated to reflect the closest Kbps setting of the sampling frequency of your session.