View multi remote desktop

Similar Questions

• Control/dimming views of remote desktop

  I was hoping I'd be able to use the Web Client to a view Desktop users, but it does not work as it connects the user to if I'm going to the console.

  Can someone tell me please what better way to hide your desktop? I don't want to use PC Anywhere or something like that, I thought that Vmware would have a way to do it.

  Unfortunately, we cannot directly provide access to console RDP sessions because of the way the RDP connections work.

  RDP in fact generates a separate virtual session that the user connects to which causes the vSphere console to display a locked screen.

  During the implementation of PCoIP turns upward a server process that hangs in the virtual video card in the virtual office. We use the Agent to sign the user and then connect the PCoIP session directly to the video card of this console through the network session.

  I don't know if there are plans to develop a kind of specific cloak that would support both RDP and PCoIP.

  -Mike

• With multi-monitor Windows 7 Remote Desktop

  I tried to remote desktop from my Windows 7 RC machine at home for my full desktop Windows Vista Edition machine with the multiscreen option, but even if I have 2 monitors works very well on both sites I can't make it work with this new feature with remote desktop. Do I need a different operating system at server end?

  Thank you very much
  Richard.

  Hello Baker,

  Thank you for using the Microsoft Answers forum.  Remote Desktop connection supports screens high resolution that can be split over multiple monitors. However, the total resolution across all monitors must be less than 4096 x 2048 pixels. Monitors must have the same resolution. In addition, monitors must be aligned side-by-side.

  Order for the Office of the remote computer span multiple monitors, type Mstsc/span at a command prompt.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Vmware View automatically starts my VM. Strategy of remote desktop in View Manager does not

  I saw 4.6, atomated created using floating assignment. Remote Desktop political power is set to take no action of power.

  My problem is that if I turned off my VM manually, the display manager will automatically start my VM. Sometimes it takes 3 minutes ahead of the display automatically power on my virtual machine.

  I want to stop some of the VM who use it not to decrease the OPS are / s of my SAN server. We have a problem with PAHO are / s that causes all time latency to all my VM. I have VM 503 in my vSphere, this train of vDesktop and vServer. All that are affected, once that our ES Ops / s increase up to 6000.

  Someone has an idea for this one? Thank you!

  In the configuration of the pool settings tab, there are an option for the number of spare parts (workstations powered).   Reduce this number if you want to deposit it number of workstations are always turned on.

• View the lines of the grid or square patterns using MS Remote Desktop

  Hi all

  I had this problem since the Fusion 3.0.  I've upgraded to 3.01 and now 3.02 (232708) - running past patches of snow leopard on the macbook pro unibody.

  I searched but perhaps I am using the wrong keywords because I can't find any text on this issue.

  The current problem is when I use MS RDP connect and manage my windows 2003 and 2008 HP and Dell servers, grid or vertical and horizontal lines to corrupt and my remote desktop display.  (My Office/display continues to work ok). I've attached a screenshot of the screen, RDP, for example.  This problem manifest itself when I using either fusion windowed mode or full-screen.  I tried to connect to a windows 2000 Server and does not see it

  problem.

  I turned on and off 3d acceleration for this problem.

  My Fusion guest operating system is Windows XP SP2, built from scratch in Fusion 3.0.

  Any help would be appreciated.  Thank you.

  You should watch this patch from Microsoft:

  A fix is available for the customers (RDC, Remote Desktop) 5.1 to fix a drawing failure after you apply the security update 958470 (MS09-044) on a computer that is running Windows XP SP2

  In particular the description:

  > the grid is visible in the Terminal Server session window.

  > Notes

  > This problem may occur regardless of the operating system installed on the server terminal server.

  > This problem is more likely to occur when the Terminal Server session window is open, but not maximized.

  > When this problem occurs, you can temporarily solve the problem of maximization of the Terminal Server session window.

  > This problem does not occur if you use RDC 6.0.

• Apple Remote Desktop (3.8.5) on several network interfaces

  Location:

  Running Office at distance between an iMac and a Mac mini, both running up-to-date El Capitan.  ARD version 3.8.5

  Both computers are on two networks, the WiFi network including the internet connection and is therefore "primary" and a wired machine-to-machine ethernet connection.  WiFi and ethernet are on separate subnets.

  In Didier, ARD 3.8.4, the Remote Desktop on the Mini app would announce (on Hello) as 'Active' wireless and wired interfaces, and from the iMac, I could choose who I want to use.  Usually the cables, connection gigabit ethernet to reduce network activity on WiFi.

  After these two machines 10.11.2 and ARD 3.8.5, update the Mini looks like 'Active' on the WiFi connection and 'offline' on the connection wired and is the remote desktop will not connect via the wire link. (no change with 10.11.3)

  I tried all combinations of options, I could think of to try to force the 3.8.5 on the Mini ARD announced as 'Active' on the wired connection.  Until beginning with no network connection, at all, on each machine, with all remote management and sharing turned off, re-boot both systems and leaving the disabled WiFi connection.  All to nothing does not.

  Paradoxically, file sharing works great!  It's just the Remote Desktop/screen sharing (Yes, I tried also, all possible combinations) will not announce or connect to the wired connection.

  When the two networks are active, sharing on the Mini preferences show the IP address for the primary network (WiFi) as well as the name (Nimitz.local) of the computer.  However, if the WiFi connection is not active there is no IP address displayed and the ".local" does not appear in the name of the computer.  It appears as just "Nimitz" not "Nimitz.local".

  I went through all the / library, folder ~ / Library, looking for whatever it is possibly connected to this issue.  I opened the files, checked the files, replaced the files and deleted the files without result.

  So my question is: how to do Remote Desktop or screen sharing to connect to the wired interface?  I'd rather not try and go back to Yosemite and ARD 3.8.4 if possible.

  Thank you for your patience!

  Kyle

  App for screen sharing, it must use the wired connection if you Set 1) Ethernet on your system of Viewer to be the first interface in system preferences-> network-> gear-> Service order icon set... and 2) to connect to the target by its IP Ethernet address. Remote Desktop is the MAC address of each computer and combines the addresses into a single entity. Most likely, the second computer that shows 'offline' is a file incomplete or dead. I would like to delete it. ARD promotes the address who has worked both previous. In theory, you can turn off WiFi and connect once via Ethernet and it will remain.

• getway remote desktop

  Hello world

  I recently put Remote Desktop Getway (in r2 Windows Server 2012) for our company to manage Remote Desktop connections, but I meet weird n.m. r getway remote desktop, it randomly can not establish connection with internal resources, that happen to random customer temporally random (some clients cannot connect to x.x.x.x for example but they can connect to y.y.y.y and sometimes there is no problem and they can connect everywhere and sometimes they can connect to y.y.y.y and cannot connect to x.x.x.x). for clarity, I have added a screenshot of the error and the associated newspapers

  

  

  

  

  

  

  

  

  and also in Security tab in Event Viewer is nothing else than the "success of the audit.

  I did as a result of actions and troubleshooting, but still could not solve the problem:

  (1) I changed the firewall rule to allow all traffic/RDG sever (to make sure that the firewall is not blocking anything RDG)

  (2) I checked "allow taken maximum supported simultaneous connections.

  (3) there is no logging information in the internal resource related to the error of remote desktop connection

  (4) there is no problem with the certificates of office remote (I checked the thousand times)

  (5) there is no problem with Remote Desktop Connection client (I checked the Advanced setting and there is no problem with the server getway rdg setting I checked also the thousand times)

  (6) our customers have all the flavor of the operating system windows XP to server 2012 (this problem is not related to a single flavor)

  (7) I run vmware workstation and tested this problem of different virtual machines and the funny thing is I've met different behavior (randomly change everything)

  Please help, nothing makes sense, and I have no idea where is the problem

  I appreciate any comment or suggestion

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Microsoft on a Mac Remote Desktop

  I have a user who wants to use a desktop app remotely in distance back to his PC Windows7 of his Macbook pro.  I could download and install Microsoft remote desktop 8.0.9 from the Apple app store, but I am unable to connect to the computer, it keeps on indicating that the RDP client impossible to connect and to verify that the name of the PC is correct or enter the IP address.   I greeted the remote to the PC on the side user PC Windows7.  The Macbook pro is running OSX Mavericks 10.9.4.  I was wondering if there are any known issues with this version of RDP works perhaps only not with the OS X version?  I got lucky in the past be able remotely on Windows PC from a MAC using the RDP Windows client, but a hard time working on my version.  Maybe I should try a 3rd party RDP client?

  Rob

  There is a much easier way.  There is a 3rd party called team app Viewer that is used by millions of pro.  I use it about 6 hours a day and it's free, bullet proof and easy to use.

  You can download the windows, mac, iPad, i {hone and Android versions here}

  http://www.TeamViewer.com/en/download/Windows.aspx

• Remote Desktop stop working after update

  Anyone know why my remote desktop connection did leave work after upgrade to Win 7?  It works in my other computers, so I know that this isn't their server or my credentials.  I checked the box for allow through firewall remote desktop, but I wasn't sure of what other boxes to check.  I don't want to allow access to things that I shouldn't.  Can anyone help?

  Hi t.richards,

  a. do you receive error messages when connecting to the remote desktop?
  b. what updates did you install?
   
  You can check the updates installed in the history of the update.
   
  Follow these steps to see the Windows updates are installed on your computer.
   
  1. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.
  2. in the left pane, click view update history.
   
  For more information, visit the links below:
  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-removing-updates
   
  Also check if the settings for the connection Remote Desktop is correct refer the links for more information below.
  http://Windows.Microsoft.com/en-us/Windows7/connect-to-another-computer-using-Remote-Desktop-connection
  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-using-Remote-Desktop-connection
  http://Windows.Microsoft.com/en-us/Windows7/what-types-of-Remote-Desktop-connections-should-I-allow
   
  Hope this information is useful.
   
  Umesh P - Microsoft Support

• Remote Desktop connection crashes computer

  I have a windows xp pro machine used for game servers.

  do not really need to do much with it except from time to time to update programs, so I connect to it the using connection since a ultimate win7 remote desktop machine and an another win xp pro machine.  everything works very well for more than a year.

  recently, I had several problems; the box was hacked, but it doesn't seem they did anything except create a userid and snooping.  I have (actually deleted) patched the problem (winamp) and all was well again.  I say this only for the sake of completeness, but don't think that this is relevant

  fast-forward a few months, and one of the drives falls out of the raid mirror.  I ran a repair on it and it seemed ok.

  then all of a sudden, when I now try to connect, it blocks the machine, I am trying to connect to, constantly.

  any suggestions?  I need this machine to accept remote connections, and in any case stop crashing when someone tries.  I have done a ton of anti-malware analysis, using a dozen programs different in case, but didn't find anything.  the daily program is microsoft security essentials, but I run several scanners/cleaners and found nothing.

  also ran ccleaner just in case it was something registry

  any suggestions on how to fix this?  is there a method to reinstall this function or?

  a single note; I CAN remote in the other computers on my win7 ultimate box, so it's certainly that a target of winxp machine.

  IM lost at this stage

  Thank you

  brand

  [edit] I did a full scan with several software products malware/anti-virus (including malwarebyes, spyware, microsoft security databases Dr.) and nothing found.

  also custom restoration system for some reason, so I can't go that route

  and I tried Office remotely to control another computer, and that works fine, so its only when the computer is a target

  Hello

  ·        The computer crashes upwards or it does not restart?

  If it then restarts, it's probably a blue error screen. I suggest you to disable the auto restart and reproduce the problem. If it you encounter a blue screen then, let us know the exact error message and code. To disable automatic reboot follow the steps mentioned below.

  a. right click on my computer and then click Properties.

  b. click on the Advanced tab.

  c. under Startup and recovery, click settings to open the startup and recovery dialog box.

  d. clear the checkbox automatically, restart and then click OK, the number of times required.

  e. restart your computer so that the settings take effect.

  I also suggest you to check the event logs. Follow the steps mentioned in the article below.

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Remote Desktop left the unlocked console session after I disconnect, - BAD!

  Often, I connect to my Home PC, Windows XP Pro SP3 running to work.  When I leave the House, the session is locked.

  I recently discovered that when I disconnect from a remote desktop session, the computer is left * unlocked * even if I disconnect the session by locking the PC.

  I'm fairly certain that it wasn't how things behave initially.  This change with SP3?

  Currently, I connect to work with a Windows 7 Pro (64 bit) machine, but there is this problem with my old laptop which ran from XP Pro SP3.

  How can I stay locked to disconnect the console session?

  END THE SESSION IS NOT AN OPTION.  I have user programs that run in the session that must continue to run. I have need of the session is running, but locked.

  Hello

  In my case it was the full client of Teamviewer which is a problem, including a version earlier than 5.1.9385, when I upgraded to this one, the problem disappeared!

  Now there's another question that should be checked, if you Live Mesh Beta (which runs on windows XP and not a new one which has no Vista/7), then there are chances that you have activated the Remote Desktop feature, you can find two devices under the 'View' node in the Device Manager named 'Live Mesh curtain Driver' and 'Live Mesh Mirror Driver. You can turn them off, restart and check if the problem persists.

  A last suggestion if the above could not solve the problem is to update the drivers of network card in your machine.

  I hope this helps.

  George Simos

  Microsoft MVP - System Center Configuration Manager

  MCSE 2003, MCTS, ConfigMgr virtualization

• While trying to upgrade to remote desktop I get the following error message: Setup cannot update your Windows XP files because the language installed on your system is different from the update language.

  KB952155 Setup Error.

  While trying to upgrade to remote desktop I get the following error message: Setup cannot update your Windows XP files because the language installed on your system is different from the update language. Now, that - what it means and how can I fix it? I have installed SP3

  Eivind Aakhus Hello,

  If you have the latest version of Office installed on your computer remotely, then you need to enable the Active X control.

  Follow these steps to activate the ActiveX module.

  a. open Internet Explorer by clicking the Start button, and then click Internet Explorer.

  b. click Tools, point to manage add-ons and then click Enable or disable add-ons.

  c. in the list view, click to view all ActiveX, ActiveX controls downloaded controls.

  d. choose the one you want to activate, and then select Enable.

• External machines to Vista cannot RDP to a Server2012R2 running Remote Desktop Services

  We have recently updated our server RDP to the server 2012R2 and installed the remote desktop Services. There is no problem to connect to it internally and externally the Windows 7 machines are able to connect once we install the updates of the following two:

  http://support.Microsoft.com/kb/2574819

  http://support.Microsoft.com/kb/2592687

  The problem is with the external Vista machines. They can connect to the original web interface (remote.xxxxxx.ca) and they see the Remote Desktop tab RemoteApps server and workstations, but clicking on the link just puts them in a loop "enter your credentials. Nothing in Event Viewer that I choose to see what he's blocking me. None of group policy or NPS that I can see which could block access.

  As mentioned earlier, internally a Vista machine works very well, outwardly this same machine won't be able to connect. No problem at all with Windows 7 or 8/8.1

  Thanks for your help.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Connection problems with remote desktop connection

  Good somehow I try to connect to my remote friends computer and it has a windows 7 and I already configured on his computer. I already forwarded Ports on his computer, his static IP, added exception to the firewall, including Norton Internet Security Firewall 2013, so his remote desktop connection is good. But my computer is a Windows Vista Home Premium, but somehow, it wont let me connect it keeps telling in a dialog box with this error:

  Say this 'Remote Desktop disconnected"
  "Try to connect again. If the problem persists, contact your network administrator or the owner of the remote computer.

  But it's is not my friends computer problem, its my computer, I would have never been able to use Remote Desktop on my computer, I have no idea why. I also configured with my router Embarq EQ 660 - R in the NAT rule SUA Port 3389 with my routers IP. But somewhere in my firewall, it doesn't let me use the same TCP 3389 port, it won't let me enter any number of his strange. Well, I have the screen shot a photo so I'll attach the image so you can see what I mean. But I already have my friends computer sent a static router IP configured on him and on his router port everything worked fine, but the problem is mine, don't let me not the port before my router only if I use the NAT option and entering into the rule of SUA, in which I made with port 3389 , and my default gateway static IP.  I also added an exception to my Windows Firewall and also my Norton Internet Security firewall, 2013 including the application, but still somehow, it does not work. On my router, if I try to put the port range: 3389 to 3389. Added the name of Service like RDP, Type of Service: TCP. Also, I made my public computer static IP a little go. A how's my friends computer it works

  Thanks I would really appreciate it

  Hello Cristian,

  I understand that you can not connect to connect to the computer Windows Vista Home premium to Windows 7 computer using remote desktop.

  I wish to inform you that you can not use Remote Desktop connection to connect to the remote computer (host) running the following editions of Windows Vista:

  ·         Windows Vista Starter

  ·         Windows Vista Home Basic

  ·         Windows Vista Home Basic N

  ·         Windows Vista Edition Home Premium

  You can also view the below article for more information.

  Remote Desktop connection: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions#EI

  Connect to another computer using Remote Desktop connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-another-computer-using-Remote-Desktop-connection

  I hope this helps. If you have problems of Windows in the future, let us know and we would be happy to help you.

• Cannot print from remote desktop

  Original title "Printing problem" remote

  I work over the desktop connection remote for another company. Recently, all of a sudden, I can't print when I am connected remotely (I've selected the "Printers" checkbox on the Options/Local tab resources before opening the Office remotely.)

  When I bought a new Kodak printer it started while I got the Kodak printer. I have a HP officejet 4500 and it worked fine (I still have it at home and it prints fine from my laptop) so when I went to replace I bought the same machine only a slightly newer version. When I am connected remotely, it recognizes the new printer and acts like it sends but nothing happens and it has no build up in the Q.

  Hello

  1. you receive an error message when you try to print from the remote desktop?

  Resolution:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  You can run the fix it or follow the steps provided in the link below to solve the problem with the printer prints don't for the remote connection.

  Printers that use ports that do not begin with COM, LPT, or USB are not redirected in a remote desktop or Terminal services Server session

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;302361

  See also:

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Print from a remote computer to your printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/print-from-a-remote-computer-to-your-printer