Ingest does not change the name of files
Hello, I am trying to ingest a project who shot the 3 cameras, canon 523, canon 60 d, canon 70 d all files mov, suddenly on one day. I am trying to ingest and rename using crΘation HH-MM-SS. I put all the files in a folder before you ingest it and set it to 'Rename the file' and 'transfer of clips to destination '. When I ingest, it copies the files to the new location, but they are all always named with the name of the original file. I have tried with and without transfer clips and tried to rename different criteria such as "Custom Text" and nothing works. Always the same old file name.
Any help? I spend a lot of time trying different things and nothing works. The possibility of multi-cam rename turned times sounds wonderful, but it does not work for me!
Thank you!
HI -.
I took pictures of my Canon 70 d, copied in a folder (as you mentioned you did) and then she ingested from there. I created a new Preset to rename and used the CREATION TIME format HH-MM-SS. I activated the TRANSFER box, I also enabled the FILE RENAME box and then clicked on INGEST.
The files copied all followed the naming convention that is appropriate, as defined in my preset.
You can take a screenshot of your configuration of INGEST dialogue - list all the options for the FILE RENAME section? If you can send me your file rename PRESET that would be useful. To find the file rename PRESET on disk, click on the DROP DOWN MENU at the end of her rename preset selection control and choose "show in Finder/Explorer. The presets file is selected. Simply copy and paste or attach to the post on the forum - or you can send it to me directly at [email protected] if you wish.
I can't think anything else to try for sure at this point if your response is expected in return, and we can see where we'll go from there.
Thank you!
Michael
Tags: Adobe Prelude
Similar Questions
-
Why Muse does not change the names of certain images or property when exporting to HTML format? and how can I keep the integrity of the name that the image/file has been saved as?
General Muse renames a file imported image if the image is modified to achieve the design or the exit, or if the name change was necessary due to a name conflict (two different images which had the same file name when importing).
The design-time features that will modify an image include cropping, rotation, rounded corners and effects (drop shadow, bevel or glow). It is also true that, in rare cases, Muse will merge an image with other content to optimize page download performance. An example of this would be to place a background image on a block of text that contains the text using system fonts. In this case, rather than a single image for text output and a separate image for the background, Muse will combine the two into a single image.
If an image is placed or imported by Muse and not tampered with, the image is crossed without modification (including the file name) at export/publish (with him except that Muse will always rename if two different images with the same name).
-
exp.exe System/pass@xe_345 does not have the name of the service as input
Please suggest,
can be used below command name service
exp.exe System/pass@xe_345 does not have the name of the service as input
What is the problem with the command below
C:\oraclexe>exp.exe system/pass@XE file=hr.dmp log=hr.log consistent=y owner=hr Export: Release 10.2.0.1.0 - Production on Wed May 12 16:16:28 2010 Copyright (c) 1982, 2005, Oracle. All rights reserved. EXP-00056: ORACLE error 12541 encountered ORA-12541: TNS:no listener EXP-00000: Export terminated unsuccessfully C:\oraclexe>exp.exe system/pass file=hr.dmp log=hr.log consistent=y owner=hr Export: Release 10.2.0.1.0 - Production on Wed May 12 16:16:56 2010 Copyright (c) 1982, 2005, Oracle. All rights reserved. Connected to: Oracle Database 10g Express Edition Release 10.2.0.1.0 - Productio n Export done in AL32UTF8 character set and AL16UTF16 NCHAR character set About to export specified users ... . exporting pre-schema procedural objects and actions . exporting foreign function library names for user HR . exporting PUBLIC type synonyms . exporting private type synonyms . exporting object type definitions for user HR About to export HR's objects ... . exporting database links . exporting sequence numbers . exporting cluster definitions . about to export HR's tables via Conventional Path ... . . exporting table COUNTRIES 25 rows exported . . exporting table DEPARTMENTS 27 rows exported . . exporting table EMPLOYEES 107 rows exported . . exporting table JOBS 19 rows exported . . exporting table JOB_HISTORY 10 rows exported . . exporting table LOCATIONS 23 rows exported . . exporting table REGIONS 4 rows exported . exporting synonyms . exporting views . exporting stored procedures . exporting operators . exporting referential integrity constraints . exporting triggers . exporting indextypes . exporting bitmap, functional and extensible indexes . exporting posttables actions . exporting materialized views . exporting snapshot logs . exporting job queues . exporting refresh groups and children . exporting dimensions . exporting post-schema procedural objects and actions . exporting statistics Export terminated successfully without warnings. ^C C:\oraclexe> C:\oraclexe> C:\oraclexe> C:\oraclexe> C:\oraclexe> C:\oraclexe>exp.exe system/pass@xe_345 file=hr.dmp log=hr.log consistent=y owner =hr Export: Release 10.2.0.1.0 - Production on Wed May 12 16:18:27 2010 Copyright (c) 1982, 2005, Oracle. All rights reserved. EXP-00056: ORACLE error 12541 encountered ORA-12541: TNS:no listener EXP-00000: Export terminated unsuccessfully C:\oraclexe>lsnrctl status listener LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 12-MAY-2010 16:18 :39 Copyright (c) 1991, 2005, Oracle. All rights reserved. Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE))) STATUS of the LISTENER ------------------------ Alias LISTENER Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ ction Start Date 06-MAY-2010 15:32:57 Uptime 6 days 0 hr. 45 min. 41 sec Trace Level off Security ON: Local OS Authentication SNMP OFF Default Service XE Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a dmin\listener.ora Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\l og\listener.log Listening Endpoints Summary... (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc))) (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=suvarna)(PORT=1521))) Services Summary... Service "ORCL" has 2 instance(s). Instance "ORCL", status UNKNOWN, has 1 handler(s) for this service... Instance "orcl", status READY, has 1 handler(s) for this service... Service "PLSExtProc" has 1 instance(s). Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service... Service "XE" has 1 instance(s). Instance "XE", status UNKNOWN, has 1 handler(s) for this service... Service "orclXDB" has 1 instance(s). Instance "orcl", status READY, has 1 handler(s) for this service... Service "orcl_XPT" has 1 instance(s). Instance "orcl", status READY, has 1 handler(s) for this service... The command completed successfully C:\oraclexe>tnsping XE_345 TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 12-MAY-2 010 16:19:18 Copyright (c) 1997, 2005, Oracle. All rights reserved. Used parameter files: C:\OraHome_1\network\admin\sqlnet.ora Used TNSNAMES adapter to resolve the alias Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = suvarna) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = XE))) OK (30 msec) C:\oraclexe>exp.exe system/pass@xe_345 file=hr.dmp log=hr.log consistent=y owner =hr Export: Release 10.2.0.1.0 - Production on Wed May 12 16:19:37 2010 Copyright (c) 1982, 2005, Oracle. All rights reserved. EXP-00056: ORACLE error 12541 encountered ORA-12541: TNS:no listener EXP-00000: Export terminated unsuccessfully C:\oraclexe>
Seems you have the strategy (profile) password for the user of the SYSTEM, but it cannot be reason of errors like ' no. LISTENER '
Question:
change the unlock SYSTEM user account;
Published by: Teymur Hajiyev 12 May 2010 16:15
adding text "BOLD"
-
Save dialog box under does not display the list of files
Terminal Server R2 of 2012. Dialog box "Save as" for a user does not display the list of files. The address bar shows the way, there is a form for the file name box, and the user can save the file successfully. But the space that would show the files in the selected directory is empty. There is no form for the list of files box, it's just the grey box dialog box space - that is to say, it is not that it looks like an empty folder, there is simply no display form box.
The 'Open' dialog box appears normal, showing the list of files in the selected folder.
I had the user close the session on the Terminal Server and access it from another PC, even if I was not expecting to make a difference, and it didn't. I have also connected on myself and has not experienced the same problem. So it seems to be user-specific.
What a setting, the user has selected by mistake, or a mistake any?
Thanks for any help.
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Can I globally change the names of files and or directory to lowercase to uppercase?
in Windows XP or in Windows 7, globally change the names of files and or directory to lowercase to uppercase?
A single configuration change probably will not accomplish this.
Your best bet is probably the freeware "Bulk Rename Utility" program which has a section dedicated to change the case of file names.
Bulk Rename Utility: <> http://www.bulkrenameutility.co.uk/Main_Intro.php >
HTH,
JW -
Xperia M4 aqua does not display the names of contact on the phone application
Hi all
I jave an Xperia M4 aqua E2306 running Android 5.0. The problem I have is that the Contacts application shows all my contacts synchronize accounts such as Facebook or Google, but the application of the phone itself does not show the names of contacts only contact phone numbers, I went through the settings and I can't find something that will allow me to change this behavior, I deleted the cache of the phone on the settings and rebooted my phone application , but who doesn't. I have many applications installed and downloaded and lots of settings so that I don't want to factory default my phone unless I extremely need of. Any ideas?
Thanks in advance,
Jay.
Factory reset worked just fine. Thank you all :-)
-
I created my keyboard with "Microsoft keyboard layout creator v.14" and I create the package. It works fine but does not display the name of my keyboard on the language bar on the taskbar
Hello
Follow these steps and check if that helps.
(a) click Start and type area and the language in the search bar and press to enter.
(b) go to keyboards and languages tab.
(c) click on change keyboards.
(d) now, click Add.
(e) now under any input language, you have chosen who find and choose keyboard.
(f) ensure that all options are listed.
(g) if there is a check mark in the United States remove it and place a check next to the language and click Ok.
(h) now you can check cross if the preview shows you the correct layout.
-
BlackBerry Tour 9630 smartphones does not display the name of the caller
Hello
I have a Tour 9630, version sw 5.0.0.732. When the phone rings, it does not display the name of the caller, their telephone number, although this number is in my address book. Once I answer the call, the name will be displayed.
Naturally, I would like to know who is the caller before I answer! :-)
I found a few messages, ask something similar, although for different model phones. Some of them suggest that I have to disable protection for the content... but I can't find it in the options. Even in the User Guide, it contains instructions (go to Options > Security Options > General settings... but there is no "General settings" on my phone.)
If anyone knows how to solve this problem, I would be very grateful!
Kind regards
Options > Security > encryption > include contacts.
There could be other solutions... Try these:
1. make sure that you set your own country code to the Phone Dialer screen > Options > smart dialing.
Set your country code in this format: "+ xx" where xx = country code. Some countries have two or three-digit country Codes. Do not place not the '+' in the entrance of your contact.
* In the United States, the value of this country as '+ 1' Code and place your local area code in the appropriate box (this normally the default setting in a new BB).2. in the same place, change the length of National number for the number of digits corresponding to your country (since some countries have less than 10 as that set by default in the BB). Check out the total numbers, less country code. Do not place not the '+' in the entrance of your contact.
* For example, some countries have a total number to 8 (more than 3 for the country code). You must enter '8 '. -
After the upgrade to 6, security server does not change the listening Port
Came across a weird situation where after upgrading a server security 6.1.0 - 2509221, it does not change the listening SSL port during the upgrade, it was not on the standard SSL port.
It was initially configured to listen on 444 before the upgrade, after the upgrade, I tried to go back to 443 and a netstat-ban shows that it is listening on port 444.
I double checked the config.properties file and there is no entry for serverPort, and configuration shows 443 in the admin View handler.
-Re-apply the configuration via the web page does no change, always tuned to 444.
-Don't restart the service of security server no change, still plays on 444.
-Restart of the server, no change, still plays on 444.
-Statically placed serverPort = 443 in the config.properties, always tuned to 444.
All ports are verified open, 443, 444 and so I think I could have hit a bug. Someone else has security servers that listen on non-standard ports SSL?
A complete reinstallation of the Security server is provided, changing the port to listen 443, shouldn't have to do that well.
You checked config.properties, but did you check in locked.properties for the port setting see if it's been moved there before and during the upgrade? Locked.Properties replaces all the configuration settings.
-
Importing APEX app with PL/SQL does not change the id as requested app
Oracle DB XE 11 GR 1 material
APEX 4.2.2
RHEL 6.3
------------------
The following code segment any an APEX application which has been exported successfully. However, even when given a 'new' id of the application, the 'old' within the export application id is still used.
What could be wrong? In other words, how can I make sure that the 'new' id of the application is used and it overrides the 'old' id of the application that comes with the APEX app export file?
declare...
wwv_flow_api.set_security_group_id (p_security_group_id = > v_secgrp_id);
apex_application_install.set_application_id (t_new_app); # does not change the new app app ID id
....
exception
while others
.....
end;
/@APEX_export.sql;
commit;
Thank you.
It turns out that the code above (6) works very well. My development environment has a problem with the workspace is not found. Tried the code in a test environment and it worked.
Thank you.
-
changing the names of file massively
Dreamweave can change the names of files massively?
for example, a series of files named today_001 through today_100 and I want to
Rename the files through tomorrow_100 tomorrow_001.If you have not yet linked to these files in your pages, you'll love this
renaming utility
for use outside of Dreamweaver.
www.1-4A.com/rename"marshachan" wrote in message
News:ff8ccb$GJC$1@forums. Macromedia.com...
> Dreamweave can change the names of files massively?
> for example, a series of files named today_001 through today_100 and I want to
> rename the files through tomorrow_100 tomorrow_001. -
Satellite Pro P300 - Fn + f5 combination does not change the monitor
On two laptops of P300, we have a problem that the fn + f5 combination does not change the layout of the monitor.
If you press fn + f5, you see the bar where the different modes are displayed, but if you release the layout remains the same (laptop as a single monitor)
Thank you, best regards,.
Davy
Hello
In my opinion the previous action (installation of the catalyst hotkeys and reinstalled the hotkey driver) is the reason why the FN + F5 does not work properly.
In my opinion, you should clean the registry first.
Use CCleaner. It s free and cleans up the registry.
In addition, you must remove the catalyst shortcut keys because this may affect the Toshiba FN Hotkey feature.
Finally, install the Toshiba drivers from the Toshiba page
More info (right on the Toshiba driver page), you will find details on the tools simple and drivers and what are they for... -
Why an amplification of the RAM does not change the index performnance of windows vista?
Why an amplification of the RAM does not change the index performnance of windows Vista?
Hello
I m not very well, but maybe you have more than 3 GB of RAM and Vista 32 bit.
Usually the 32 bit OS is capable to manage and send only 3.2 GB.
The more than 3.2 GB RAM will not operating system used and therefore would not increase the index
In addition the laptop will be not really faster after upgrading RAM. You will notice better performance using applications at the same time, but this does not affect the index of Vista.
But this is only my personal hypothesis.Welcome them
-
Insert a new CD does not change the last torn CD
WMP 11 XP SP3 does not change the info of CD in the RIP, a new CD of screening. WMP 11 found no new updates when updates has been requested. If I close WMP 11 and reopen WMP11 new info of the CD are correct. It must be a problem of buffer information.
If you start XP in clean boot mode, the same problem occurs there?
In addition, please check if the problem occurs on other users accounts, by creating a new user account in the Control Panel, by logging into that account and trying it.
Tim Baets
http://www.BM-productions.TK -
Z10 Z10 ILA BlackBerry does not display the name of the caller of the stored contacts.
My Z10 does not display the names of the callers stored in contacts with a prefix or area code. For example, an incoming call on contact JOHN SMITH, whose number is stored as + 44 7976 667668 shows not her name but just 07976 667668, but if the number of JOHN SMITH has been stored as 07976 667668 (without + 44) then the incoming call appears her name. Does anyone know how to remedy this? or is it a design error / omission by RIM?
This is a known issue with the software currently. Please visit KB33685
Maybe you are looking for
-
Installation of WXP Pro on Satellite P200
Hello I bought a Satellite P200 today and I want to remove the Vista Home Premium and install a WXP Pro, but I can't do it. There the chipset is Intel GM965 Express. I have compiled a DVD with files for the above mentioned chipset inf, but I have pro
-
Hello I'm trying to change an existing program of LV. There a few SubVIs that cannot be changed. However, there is no possibility of using a probe or an execution Higlighting. So I'm stuck unbale to view the stream, nor able to add indicators to see
-
No error message is displayed.I tried:1. Uninstall and then reinstall the games through Control Panel.2. both UAC on and outside3. create a new user account IE8 and SP2 running
-
Hello I'm trying to create exe file that accept data, make some calculations and then return the results. The entry is not a problem, but I have some problems with getting the work output. I am currently exploring two options: 1 echo command-exec sys
-
I have an e-mail message in Windows Live Mail which is stuck and are not sent.
I run windows xp home edition. I have a message in live mail which continuously keeps trying to send, but fails. How can I break the loop? original title: stuck Message