VIEW THE CODE GENERATED IN ETL MAPPING PLSQL
Hellocan someone help me to find the option in owb where can I see the plsql code generated after mapping etl
Thank you
Hello
Yes you can view together;-generated code
http://blogs.Oracle.com/warehousebuilder/entry/owb_11gr2_errors_and_line_numbers
You can also view the intermediate code since the mapping Editor;
http://blogs.Oracle.com/warehousebuilder/entry/owb_11gr2_debugging
See you soon
David
Tags: Business Intelligence
Similar Questions
-
Is it possible to look at the code generated using the timeline?
I'm sitting here grumbling because my super-easy slideshow look right and I know that if I used the tools of design/timeline, would be perfect. The only problem is, I want to load my images using an XML file and the only way I know to do is to go strictly code. Is it possible for me to do the interpolation using the timeline and view the code that generates lightning to start the slide show. It would be a very useful learning tool.
Create your pre-teen. Right-click on one of the tween frames and click on copy movement in as3 and paste the code to inspect or use.
-
Hello
I would like to know if after I run chkdsk /f {DRIVE}: the utility generates a log file that contains the output generated by the check codes?
- If so, how/where can I access
- If NOT, how can I run this command to generate a log file that contains the exit codes
Thank you
After running chkdsk /f and restart, go to event viewer > Windows Logs > Application.
Search for 'Wininit', near the top of the list, double click on it to read the report.
-
W3C of the Code generated by Dreamweaver errors
Hello
I recently downloaded a page I created and tested the code to http://validator.w3.org/ . There was a lot of mistakes that came up in the javascript code generated by dreamweaver for my rollover buttons. Do I need to worry and can I fix this problem without extensive knowledge of javascript? Thank you!
Page:
http://littlechisel.com/clients/little-chisel-new/index.html
You can see the results of error here:
Code:
< ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
" < html xmlns =" http://www.w3.org/1999/xhtml ">
< head >
< meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"
< title > small chisel Design Services < /title >
< name meta = "description" content = "Web sites, advertising material, creation of logo and more by designer Kathy Moncelsi. 15 years of experience, personal sur-un-communication, dedication and reliability. "/ >
< name meta = "robots" content = "all" / >
< link href = "css/little-chisel - styles.css" rel = "stylesheet" type = "text/css" / >
" < link rel ="shortcut icon"href =" http://www.littlechisel.com/favicon.ico "/>
< script type = "text/javascript" >
function MM_swapImgRestore() //v3.0 {}
var i, x = offline. MM_sr; for (i = 0; a & & I <.) Length & & (x = a [i]) & & x.oSrc; i ++) x.src = x.oSrc;
}
function MM_preloadImages() {//v3.0
var d = document; If (d.images) {if(!d.MM_p) d.MM_p = new Array();
var i, j is d.MM_p.length, a = MM_preloadImages.arguments; for (i = 0; i <.) Length; i ++)
If (a [i].indexOf("#")! = 0) {d.MM_p [j] = new Image; d.MM_p [j ++] .src = a [i] ;}}
}
function MM_findObj (n, d) {//v4.01
var p, i, x; if(!d) d = document; If ((p = n.IndexOf ("?")) > 0 & & parent.frames.length) {}
d = parent.frames [n.Substring(p+1)] .document; n = n.Substring (0, p) ;}
If (!) () x = d [n]) & & copyrights) x = d.all [n]; for (i = 0;! x & & i < d.forms.length; i ++) x = d.forms [i] [n];
for (i = 0;! x & & d.layers & & I < d.layers.length; i ++) x = MM_findObj (n, d.layers [i] .document);
If (! x & & d.getElementById) x = d.getElementById (n); Return x;
}
function MM_swapImage() {//v3.0
var i, j = 0, x, a = MM_swapImage.arguments; document. MM_sr = new Array; for (i = 0; i <(a.length-2); I += 3).
If ((x = MM_findObj (a [i]))! = null) {document. MM_sr [j ++] = x; if(!x.oSrc) x.oSrc = x.src; x.SRC = a [i + 2] ;}
}
< /script >
< link href = "css/nivo - slider.css" rel = "stylesheet" type = "text/css" / >
< link href = "css/default.css" rel = "stylesheet" type = "text/css" / > "
" < script src =" http://AJAX.googleapis.com/AJAX/libs/jQuery/1.7.1/jQuery.min.js "type =" text/javascript"> < / script > "
"< script src="scripts/jquery.nivo.slider.pack.js "type =" text/javascript"> < / script >
< script type = "text/javascript" >
{$(window) .load (function ()}
$('#slider').nivoSlider ({}
effect: 'fade', / / Specify defines as: "bend, bland, sliceDown.
slices: 15, / / for the animations of the slice
boxCols: 8, / / for the animations of the box
boxRows: 4, / / for the animations of the box
animSpeed: 500, / / speed of slide transition
pauseTime: 3000, / / how long each slide will show
startSlide: 0, / / Set from slides (index 0)
directionNav: true, / / next navigation & Prev
controlNav: true, / / 1,2,3... Navigation
controlNavThumbs: false, / / use tiles for a control Nav
pauseOnHover: true, / / Stop animation while hovering
manualAdvance: false, / / hand strength of transitions
prevText: 'Prev', / / Prev directionNav text
nextText: 'Next', / / Next directionNav text
randomStart: false, / / Start on a slide at random
Beforechange: function() {}, / / triggers before a transition between slides
Event: function() {}, / / triggers a transition between slides
slideshowEnd: function() {}, / / triggers after all slides should have been disclosed
lastSlide: function() {}, / / when the last slide is indicated
postcharge: function() {} / / triggers when the cursor is loaded
});
});
< /script >
< / head >
< body >
< div id = "wrapper-index" >
" < div id = 'model-social-media-links' > < a href =" https://www. Facebook.com/pages/Little-Chisel-Design/194073243948201? "" "" "" Ref = Stream & __req = r "target ="new"onmouseover =" MM_swapImage ('facebook', ",' images/facebook - over.jpg', 1)" MM_swapImgRestore "> < img src =" images/facebook.jpg ' alt = 'Facebook' width = "31" height = '29' id = 'facebook' / > < /a > < a href = " https://Twitter.com/ChiselDesign "target = "new" onmouseover ="MM_swapImage (" twitter "," ' images/twitter - over.jpg', 1) "MM_swapImgRestore" > < img src = "images/twitter.jpg" alt = 'Twitter' width = "31" height = '29' class = 'social-media-links' id = "twitter" / > < /a > < a href = " http://www.linkedin.com/profile/view?id=117449571 "& goback = % 2Enmp _ * 1_ * 1_ * 1_ * 1_ * 1_ * 1_ * 1_ * 1_ * 1 & trk = spm_pic "target = "new" onmouseover ="MM_swapImage (' linked to ',",' images / related-over.jpg', 1) ' MM_swapImgRestore "> < img src =" images / linked - in .jpg "alt ="Linked In"width ="31"height = '29' class = 'social-media-links' id ="linked-in"" / > < /a > < a href = " http://Pinterest.com/littlechisel/ "target = "new" onmouseover ="MM_swapImage ("pinterest"" (,'',' images/pinterest-over.jpg',1)' MM_swapImgRestore "> < img src =" images/pinterest.jpg "alt ="Pinterest"width ="31"height = '29' class = 'social-media-links' id ="pinterest"/ > < /a >
< / div >
"< div id ="template-header"> < a href =" index.html"> < img src =" images/thanks "width ="466"height ="174"alt ="logo"/ > < /a > < img src =" images/tagline.jpg"alt = 'Shaping ideas in graphic arts' width = '391' height = '110' class ="slogan"/ >"
< / div >
< div id = 'model-nav-bar' >
< div id = 'model-nav-bar-color' > < / div >
"" < div id = 'model-nav-bar-links' > < a href = "print.html" MM_swapImgRestore"onmouseover =" MM_swapImage ('print', ",' images/print - over.jpg', 1)" > < img src = "images/print.jpg" alt = "Print" width = "54" height = "26" = "printing" id / > < /a > < a href = "web.html" MM_swapImgRestore"onmouseover =" MM_swapImage ('web', ",' images/web - over.jpg', 1)" > < img src = "images/web.jpg" alt = "Web" width = "53" height = "26" 'web' = id / > < /a > < a href = "logos.html" MM_swapImgRestore"onmouseover =" MM_swapImage ('logos' ") "" (,' images/logos-over.jpg',1) "> < img src =" images/logos.jpg ' alt = 'Logos' width = height = '58' id '26' = 'logos' / > < /a > < a href = MM_swapImgRestore "business - identity.html" "onmouseover =" MM_swapImage ('company-id', ",' images/bus-id - over.jpg', 1)" > < img src = "images/bus - id.jpg" alt = "Brand identity" width = "116" height = "26" = 'business-id' id / > < /a > < a href = MM_swapImgRestore "photo - retouching.html" "onmouseover =" MM_swapImage ('photo-ret' ")" "" "(,' images/photo-ret-over.jpg',1)" > < img src = "images/photo - ret.jpg" alt = "Photo editing" width = "122" height id = "26" = "photo-ret" / > < /a > < a href = "http://about.me/kathy.moncelsi"target = "new" onmouseover ="MM_swapImage ('subject',",' images / on - over.jpg', 1) ' MM_swapImgRestore "> < img src =" images/about.jpg ' alt = 'About Me' width = "77" height = "26" = 'about' id / > < /a > < a href = "contact.html" MM_swapImgRestore"onmouseover =" MM_swapImage ('contact' ") (,' images/contact-over.jpg',1) "> < img src =" images/contact.jpg "alt ="Contact"width ="77"height ="26"id ="contact"/ > < /a >
< / div >
< div class = "cursor-wrapper theme-default" >
< div id = "slider" class = "nivoSlider" >
< img src = "images/index - squares1.jpg" alt = "" / > "
< img src = "images/index - squares2.jpg" alt = "" / > "
< img src = "images/index - squares3.jpg" alt = "" / > "
< img src = "images/index - squares4.jpg" alt = "" / > "
< img src = "images/index - squares5.jpg" alt = "" / > "
< img src = "images/index - squares6.jpg" alt = "" / > "
< img src = "images/index - squares7.jpg" alt = "" / > "
< img src = "images/index - squares8.jpg" alt = "" / > "
< img src = "images/index - squares9.jpg" alt = "" / > "
< img src = "images/index - squares10.jpg" alt = "" / > "
< / div >
< / div >
< div id = 'model-footer' >
" < div id = 'model-foot of page-links' > < a href ="index.html"> home < /a > | < a href ="print.html"> print < /a > | < a href ="web.html"> Web < /a > | < a href ="logo.html"> Logos < /a > | < a href =" business - id.html "> commercial identity < /a > | < a href ="photo.html"> retouch Photo < /a > | < a href =" http://about.me/Kathy.moncelsi "target ="new"> About Me < /a > |" < a href = "contact.html" > Contact < /a > < / div >
< div id = 'model-foot of page-info' > 2013 © all rights reserved | Web Design by Design small chisel | < a href = "mailto: [email protected]' >[email protected]< /a > |" " 848.219.2385 < / div >
< / div >
< / div >
<!--> start of StatCounter Code for Dreamweaver
< script type = "text/javascript" >
var sc_project = 7879101;
var sc_invisible = 1;
var sc_security = "eaac93c8";
< /script >
< script type = "text/javascript".
src = » http://www.StatCounter.com/counter/counter.js "> < / script > .
< noscript > < div class = "statcounter" > < a title = "godaddy".
Statistics ".
" href = ' http://StatCounter.com/godaddy_website_tonight/ "
target = "_blank" > < img class = "statcounter".
src = " " http://c.StatCounter.com/7879101/0/eaac93c8/1/ "
ALT = "godaddy statistics" > < / a > < / div > < / noscript >
<! - end of the StatCounter Code for Dreamweaver - >
< / body >
< / html >
The javascript error is normal and should not be a problem. You can move the script in an external file to get the page to validate if you wish.
You are missing at least one ending well.
-
Help with error in the Code generated by the WSDL Wizard
I have generated the code the wizard of webservice and then wrote a simple mxml file to test the code. I get this error:
1061: call to a getClass method maybe not defined through a reference with static type class.
It occurs in the following code:
/**
* Internal event handler for handling a call to success from the server
* The result is decoded using schema settings and operation, then the
* events transmitted the real front that the user works in the application
* @private
*/
private void processResult(result:Object,wrappedData:Object):void
{
var token: AsyncToken = wrappedData.returnToken;
var currentOperation:WSDLOperation = wrappedData.operation;
var decoder: SOAPDecoder = new SOAPDecoder();
decoder.resultFormat = "object";
decoder.ignoreWhitespace = true;
decoder.makeObjectsBindable = true;
decoder.wsdlOperation = currentOperation;
decoder.schemaManager = currentOperation.schemaManager;
var object: body = result.message.body;
var stringResult:String = String (body);
If (stringResult == null | stringResult == "")
return;
var soapResult:SOAPResult = decoder.decodeResponse (result.message.body);
If (soapResult.isFault)
{
defects of the var: Array = soapResult.result in the table;
for each (var soapFault:Fault in error)
{
var soapFaultEvent:FaultEvent = FaultEvent.createEvent (soapFault, token, null);
token.dispatchEvent (soapFaultEvent);
}
} else {}
result = property decoder.decodeResponse (result.message.body);
If (result is ArrayCollection collection)
{
do you need to perform an upcast to specific type here
var arrayTypedClass: Class = SchemaTypeRegistry.getClass(currentOperation.outputMessage.parts[0].type);
result = new arrayTypedClass (result.source);
}
event: ResultEvent var = ResultEvent.createEvent (result, token, null);
token.dispatchEvent (event);
}
}
The statement where the error occurs is in bold above. The comment above this line says I should perform an upcast to a specific type here, but I don't know what that means. What specific type? How to determine what type of perform an upcast to?
Any help would be appreciated.
TIA,
Randy
Hi Martin,
The error you have shown, it seems, that you have upgraded your SDK version, but not the Builder. The problem you are having is because of one of the classes (SchemaTypeRegistry) SDK has been updated static to a dynamic class. Therefore, using the call getClass() on it will not longer work. In addition, the lines that register type mappings do not work.
We have updated the generated code, but it seems that you are using an older version. Now for the correction of your code, you should:
1. locate all occurrences where the class of SchemaTypeRegistry is called a static class.
2. replace the SchemaTypeRegistry by calls to SchemaTypeRegistry.getInstance () method, like this:
SchemaTypeRegistry.registerClass (params) becomes SchemaTypeRegistry.getInstance () .registerClass (params)The problem is that when you re - generate the code, you will have to re - again all these changes.
Hope this helps,
Cristian -
Hi all
I have an invoice_track of view
I want to check the code for this view it please guide me how do I check
Thanks and greetings
Vikas singhalVikas singhal says:
Hai asif even resultSQL> set linesize 1200 SQL> SELECT owner, text 2 FROM all_views WHERE owner = 'NEERAJ' 3 AND view_name = 'INVOICE_TRACK'; OWNER TEXT ------------------------------ --------------------------------------------- ZENSOL1 SELECT id as invoice_no, customer_name, nvl(dispatch_date,invoice_note_date) as SQL>
Concerning
VikasUse
SET long 100000
-
Is it possible to view the code on dynamic content rules?
We have problems with a bug that does not allow to fill us dynamic data content in a custom data object, and I wanted to try to play with the code. Is access to the code in the rules anyway? We can access the code of the content itself.
Thank you!
Hi Brittany,
We have not documented these end points, but you can search and retrieve dynamic content sections using the following endpoint:
- GET: / assets/dynamicContents? depth = {depth} & count = {number} & page = {page} & search = {search} & orderBy = {orderBy} & lastUpdatedAt = {lastUpdatedAt}
The response to this appeal is as follows:
{
"items":]
{
'type': "DynamicContent"
« id » : « 1 »,
'converted': '1219180658 ',.
"depth':"full. "
"description": ","
"folderId": "1418",.
"name': 'sample product Promotions."
"updatedAt": "1321729405",
"updatedBy": "310"
'defaultContentSection': {}
"type': 'ContentSection."
'id': '21 ',.
'converted': '1289253558 ',.
"createdBy": "12."
"depth':"full. "
"folderId": "320"
"name': 'rule by default."
"updatedAt": "1343658302",
"updatedBy": "234"
""contentHtml":"
example of content<\>«»
"contentText": "our sample seminars cover all of the United States...". »,
'forms': [],.
"links":]
{
'type': 'hyperlink ',.
« id » : « -1",
"name': 'check now."
'href': "" http:///\/ www.eloqua.com?elq=recipientid<\ pan="">& elqCampaignId =
". \>\>}
],
"images": [],.
"scope": "local."
'size': {}
'type': 'Size',
'width': '0',
'height': '0 '.
}
},
'rules':]
{
'type': 'DynamicContentRule ',.
« id » : « 1 »,
'contentSection': {}
"type': 'ContentSection."
« id » : « 8 »,
'converted': '1287346933 ',.
"createdBy": "9."
"depth':"full. "
"folderId": "320"
"name': 'sample content."
"updatedAt": "1323263825",
"updatedBy": "51",.
""contentHtml":"
example of content<\>«»
"contentText": "example text."
'forms': [],.
"links":]
{
'type': 'hyperlink ',.
« id » : « -1",
"name':"survey. "
'href': ' "http:///\/app.en25.com\/e\/er.aspx?s=1002&lid=704&elq=recipientid<\ pan="">".
}
],
"images": [],.
"scope": "local."
'size': {}
'type': 'Size',
'width': '0',
'height': '0 '.
}
},
'criteria':]
{
'type': 'ContactFieldCriterion ',.
« id » : « 1 »,
'condition': {}
'type': 'TextValueCondition ',.
"operator':"equal. "
'value ':
},
"fieldId": "100047"
}
],
"depth':"full. "
'Déclaration': '1 '.
},
...
]
}
],
"page": 1.
"pageSize": 1.
'total': 100
}
Please note that this endpoint can change and we will seek to have a more complete documentation about this.
Thank you
Fred
\>\> -
view the code for two different pages at a time
HI - in other editors I've used I've always been able to implement the code for two different pages so that I can watch side by side to compare. I can't find a way to do this in Dreamweaver. Anyone know if this is possible?
Thank youFound. Always after asking for help! This is the "cascade" in the Windows menu.
Thanks anyway! -
How to debug the code for fast formula OTL plsql?
Hello
I have trouble understanding the flow of my code PLSQL (function), which is called by a fast formula HRMS.
I don't know how to debug.
Can I add lines of hr_utility.trace to the PLSQL? If so, see where you put it?
Help, please.
Thank you
Germain
Hi, Germain,.
You can start the trace in the form and complete it in the formula. The handle of the trace will display all messages of the formula and the pl/sql functions that formula calls internally. So, indeed, you should get all the trace messages in your trace file.
If you want to only draw a pl/sql function, add this in pl/sql code from the point you want to draw, and then add the trace_off at the end-
hr_utility. TRACE_ON (null, 'VBATTU_TRACE');
hr_utility.trace ('# START #');
..
..
..
..
hr_utility.trace_off;
Cheers,
Vignesh
-
Hello
When I generate output files using RoboHelp HTML 10 printed Documentation, the pages on the screen containing code for all items on all pages. When I print the document, the code has disappeared. Anyone know how I can't view the code on the screen?
Thank you.
Please do not take into account. I chose to show hidden text in MS Word and when I disabled the check box, the strange code on the screen disappeared.
-
I downloaded visual basic 2008 express. When I go to view the code, it is invisible. I don't see it. I don't need to read, modify or add. I uninstalled, reinstalled 3 times and tried a fix without help. When I copy and paste the code that is invisible to a word document, then you see on the word document. Please someone tell me how to do to be able to see in the region of code in the visual basic application.
Hello
The question you have posted will be well suited in the MSDN forums. Click on the link below.
http://social.msdn.Microsoft.com/forums/en/vsexpressvb/threads
-
Files for the code on the left, right
Now the file group is above the code window, I have to close it to modify the code and open again to access my files. I would like that it behaves like it used to behave before, with all my files always accessible and when I open a file I can view the code to the right of the files, not below it.
I found it!
They said 'move the Panel to the left and when the border will be the output of the Panel and it will dock'.
But when I moved the Panel near the edge, it could yield to the edge and then I pulled out and nothing, no highlight and no connection. So that the highest point are displayed, you need to move the Panel file past the left edge of the screen and then it will dock.
The devil is in the details!
-
Firefox 41.0.2 long lines don't wrap when you view the source code
When I try to view the source code of a web page, I have to use horizontal scrolling. How can I make the text as it does on my IE6?
If necessary, you can change the setting in this way as well:
(1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.
(2) in the search above the list box, type or paste wrap it up and make a pause so that the list is filtered
(3) double-click the preference view_source.wrap_long_lines to switch the value from false to true
-
Replace step Fail State causes the sequence fail LW/CVI custom Code generator
Hello
I have a Code CVI generator as part of the Toolbox ATML importer. OR kindly gave me an example of how to change the Type of step as part of the custom Code Generator DLL and that works very well.
However, if I try to change the step Fail value causes the sequence fail to VTRUE it seems do not set the value when the sequence is examined on a test bench.
The code I use is:
TS_StepChangeStepType (stepHandle, & errorInfo, typeDefinition);
-where typeDefinition can be modified to change the type of step, it works and I can change the type of step if necessary.
TS_StepSetStepFailCausesSequenceFail (stepHandle, & errorInfo, VTRUE);
-who does not, the box is always set to VFALSE.
Is there something that I am missing?
Thank you very much
Steve
Steve-
You must use the PropertyObject step to change the failure step Option. There should be a line of code the generator of custom Code that calls:
Get the step as a PropertyObject in case it is necessary to change the properties of the General step
tsErrChk (TS_StepAsPropertyObject (stepHandle, & errorInfo & stepObject));The stepObject is what you need to pass to the TS_StepSetStepFailCausesSequenceFail function as follows:
Set the Option of failure of step-by-step
tsErrChk (TS_StepSetStepFailCausesSequenceFail (stepObject & errorInfo, VTRUE));
Please let us know if this happens to you to correct results.
-Jeff
-
How to simplify the code to generate custom error codes and messages
I designed a vi that generates the error when any data entry is missing, it works correctly, but the problem is that I want to simplify, because it is part of the main program and its block diagram is great to use as such (I tried to use this vi as a Subvi in the main program, but that does not work correctly) so I need help to simplify the code or if there is no other better medium to generate the error message.
Hello
As shown in the previous example, to a different question of yours, it is always good to reduce with diagrams of huge block with repeated code.
When you overwrite functionality even repeated several times, put it in a loop and run it to have recurrences of 4 or 5 of the same code.
It will be evolving in the future.
joined the vi changed for you.
Note: when you want to simplify your program, isolate your code in functions, put each function inside a under vi.
in your case, you can have the control to an empty string for all channels within a Subvi. build an array of strings and go through the subvi. Control in the sub that VI is that strings are empty.
an array of Boolean output error. build your error string in another under vi. the wires together.
Maybe you are looking for
-
I need to reset an old phone, but he has an old Apple ID that doesn't exist anymore
I have an old 5 iPhone and I want to reset it completely, but the problem is that the iPhone has a Apple that we changed the kind email ID pretty well there. Someone has any idea how to solve this problem?
-
What plug-ins are not needed?
I don't know what plug-ins are necessary and should be deleted. Thank you.
-
Error message when you set the supervisor password
When I try to set a supervisor with Toshibas utility password password I get the following error message: "Set Supervisor Password function Fail!"Why is it not possible to set a supervisor password? I have not yet defined any other password.
-
Satellite C50D-A-12 x - touchpad does not work after Windows Update
the touchpad does not work after the windows updare
-
OfficeJet 4620: Error Message
The splash screen has a message that reads "turn power off, t" is anything that shows, given the size of the screen. The on off button isd does not if you can disable it by disconnecting him. When you reconnect, the return message. Cannot get printer