View the columns in your report based on the command prompt

Similar Questions

• After the command prompt performance report

  Hello
  
  I need to create a dashboard with a quick dash and a report of the response.
  
  I wish that the report is run and displayed ONLY after YOU select values in the command prompt, and then click the 'GO' button in the command prompt.
  
  Can you help me?
  
  Sara

  Stop execution before the selection of the user of the values in a dashboard command prompt.
  Re: Guests of dashboard - immediate start to search
  How to stop research on the dash when you open the dashboard...

  See you soon,.
  C.

• Aggregate in the command prompt values

  Hello

  My Table.Column has below values:

  A

  B

  C

  D

  E

  I want to show: A, B, "BOTH" in the dash prompt.

  When A or B are selected in the command prompt, the respective values are supposed to go to the report; and when "BOTH" are selected both A and B must be passed to the report.

  Appreciate any ideas or advice.  Thank you very much in advance.

  Hello 920424 ,

  You can create a group to do this.

  Here are the steps to follow:

  • Create an analysis on this topic and go to the tab results click the icon with 3 blue points and a star in the menu bar.
  • Create your group by selecting a display label ('TWO') and by selecting the column and the value you want to put inside (A and B)
  • Spend the selection steps pane at the bottom of the screen and click on your group (BOTH)-->Group Save as... and save it in the subject area content folder.
  • In your guest Dashboard spend Options , add the same column and lookup values , select the values of specific columns, and then click the Plus sign.
  • Add A and B of the values in columns pane and add your component catalog group.

  Here you are.

  More info on the Group and calculated items: http://docs.oracle.com/cd/E23943_01/bi.1111/e10544/filter.htm#CJAHGBBE

  How to save: filtering and selection of data analysis - 11 g Release 1 (11.1.1)

  It will be useful.

  Kind regards

  JeromeFr

• and from the command prompt

  Hi all
  
  I want to add 'from' and 'to' prompt on a single column. Let's say a column date of creation. I could create a guest on this column and set the condition as "in between", but it asks me to choose the date between <>and <>. However, I would like to specifically show since and for this colmn. It should look like this
  
  From <>to <>
  
  wheareas currently, it is
  
  between <>and <>
  
  I know that the two are the same thing, but I want to use the first option only. Could you get it someone please let me know how to do this. I tried to create two promtps on the same column, but the problem is that when I select "go" prompt values so the same value is automatically filled into the prompt 'to' too.
  
  Please let me know.
  
  Thank you
  Ronny

  Offhand, I can't think anything, because it works for me. Try putting a date that is hard-coded in the guest as a default value. The date appears in the column then? The column shows 0 after changing the quick selection?

  Write the details of how you built the guest and the special report on configure the 'From' and 'To' columns in your report. Perhaps, that will give me a hint.

• Timestamp in the command prompt

  Hello Experts,
  I try to set a time stamp to a variable presentation so I can use to filter reports, but the variable is set to one value other than timestamp, so I can't filter use it. Is there a way where I can ride in the prompt so I can achieve.
  
  Concerning

  Try this:

  In the command prompt, select a column of type CHAR. Do this two times. In the formula for each column, enter the CASE WHERE 1 = 0 THEN tablename.columname ELSE 'test' END

  This prevents the column being altered by the SQL. Now type this SQL:

  SELECT DISTINCT Time.Calendar_Date FROM subject_area and set it to a Variable (PV) presentation called StartDate.

  Repeat the above but the second instance of a PV called EndDate.

  Now in your request on the date column, add the Time.Date_column filter > = @{StartDate} AND Time.Date_column<=>

  It will work.

• Execution of multiple lines of command at the command prompt (windows)

  Hello

  I'm vascular using the command prompt in the windows to try to send a command to the microcontroller that is connected through TCP connection.

  I am able to use the normal cmd.exe to send the command but I am unable to send the command all successfully using labview.

  The Vi. I use the exec.vi system found in the labview connectivity section.

  Basically, I want to send is 'telnet A1' motion in the cmd.exe to establish a connection to the microcontroller, followed by "For A1 100 GO," which will be performed by the microcontroller to do what is necessary. But currently, the problem is that I can only establish a connection using the exec.vi system but can't send the second part of the message 'for A1 100 GB".

  My command line, I tried typing is cme.exe /K telnet A1 & for A1 100 GB. It seems that labview is only able to run the first part of the command. Y at - there no alternatives?

  Thank you for all your help.

  I suspect that there are problems of synchronization with this code. Forst, you should clean it to the top because it is very difficult to follow. Cables are hidden under objects, this is a lot bigger than a view type and the code is usually very disorganized. I also suggest that you look at using a state machine, but also a structure of the event to intercept the user interface events such as the Start button.

• Can't see my Windows 7 user account (users\John) in Windows Explorer. I search/modify it from the control panel. I can see it from the command prompt. What gives?

  I use Windows 7 and everthing works apparently fine.  However, I can't see my account of user (users\John) in Windows Explorer.  I see the default administrator. Accounts and account "TempAdmin" I just did.  I search/modify 'John' in the control panel.  I can see ' C:\Users\John > ' from the command prompt and the view (dir\) directories, but it is not there in Windows Explorer.  What gives?

  I use Windows 7 and everthing works apparently fine.  However, I can't see my account of user (users\John) in Windows Explorer.  I see the default administrator. Accounts and account "TempAdmin" I just did.  I search/modify 'John' in the control panel.  I can see ' C:\Users\John > ' from the command prompt and the view (dir\) directories, but it is not there in Windows Explorer.  What gives?

  It is a file system / hidden?

  May not, your settings in Windows Explorer is configured to be able to see (display hidden and system files/directories).

• Need help to fix a computer using the command prompt

  So, my computer has suddenly crossed an escalation of alarming events, culminating with a very desperate, me trying to get information on the "Command Prompt". I don't know why, how, and it's all heart-wrenching. If someone has an idea of what could be done to fix it, I'd certainly eternally grateful to them. I will try to be as detailed as possible, so I don't miss information that might be useful for someone who know how to use.

  I have an Acer Aspire V5 - 573G, running under Windows 8 64-bit with a 12G RAM, about 1 year and a half old, and this is the story of his unexpected collapse.

  3 days ago the computer suddenly began to show extreme problems with the help of any program. I had let him sleep for a few hours, and when I came back all started running very slowly.
  At the beginning I'm not too worried about I have mostly ran programs dependent on Internet and thought it was a simple connection problem. I have conducted a malware check (which I use quite regularly anyway) and downloaded Avast to see if he could detect all viruses, but everything was fine.

  However, after that them stopping and turning back on the morning, things only seem to be deteriorating. I was not using my computer much at all, but after the second day of the fight with all that I realized that in Task Manager, something was really wide, and the drive was 100% use even when nothing was running.
  Usually, after a few minutes it would go back down to 1-2%, but as soon as I ran whatever it is, even simply open Control Panel, happen very quickly to 100 times (sometimes the Task Manager was sufficient to make this happen).

  I removed Avast and tried to delete the process when I made sure it was safe to do so, but it did not work. I tried after tutorials on the Internet for people who reported similar problems, which led me on a desperate journey funny through Windows Defender removal, an (unnecessary) extreme increase virtual memory (which I brought to the standard after that report maybe just made even slower computer), something to change the parameters of High-Performance mode so that the Hard Drive would never turn off has tried to stop the search and indexing in my session, make a small altar to Turing... nothing worked.

  I ran a chkdsk /f C: who found problems with indexing files / indexed and likely fixed, because when I ran simple verification once the computer has been again this topic found no problem. However, the situation was the same: essentially constant use of the disk of 100% and no way out.
  A sad moment, after hours of attempts, I stopped by mistake the wrong process, explorer.exe. I restarted the computer, and then the problem was still there, at least explorer.exeseemed fine.

  However, when a few minutes later, I rebooted the computer, even once, I couldn't access the desktop more and I found myself in a loop of reboot attempt that has nothing, attempted to retrieve an earlier version of the system but nothing happened.

  The only thing I can do is access chkdsk to see what the problem is, but I'm not sure that I could see a way out of this, even if there was a. The only thing that seems clear is that there is a lot of damaged clusters, that he can't solve.
  This morning I ran 2 other chkdsk /f c:, the results by saying that there was no problem and no further action was required.
  So I ran a C: /R, and once again he told me that there are some clusters damaged in this file.

  Is there something I can do? Someone has an idea of what could have happened?
  My idea was to wait for it to perform this check, run a chkdsk /f /r c: and see how it goes if I restart it, but I could really use advice from more experienced and skilled people.

  The computer has not received any physical damage, not even in the relatively distant past of her young life. Before he started having all these problems he did nothing particularly requiring either, just running a few innocent Assassins Creed II (with 11.9 available RAM for what I remember stats and a Nvidia GeForce GT 750 M, I think not that it should have been a source of so much distress). This is the first time it gives me problems.

  Also, I apologize if any information was unclear or confused, but not only am I a tragedy with computers, I also use a computer in a different language and a few technical terms could have been translated a little too big. If someone needs more information, I can do my best to give it.

  Hello

  Windows Defender is the default Antivirus which comes with Windows 8 and should not have been "removed."

  @@@@@@@@@@@@@@@@@@@@@@@@

  Reinstall your operating system:

  Here are the instructions Acer for recovery to factory settings, new condition.

  "Using Acer eRecovery application to restore your system or to create a recovery media.

  http://Acer.custhelp.com/app/answers/detail/A_ID/29934/~/use-Acer-eRecovery-application-to-restore-your-system-or-create-recovery-media

  See you soon.

• Validate if something is selected in the command prompt

  Hello-

  How can I check if something is selected in the command prompt? In the report, I have to do < function1 > when there is only option selected in the prompt else < function2 >. I tried with variable presentation. So, my syntax in the column:

  -CASE when @{Var}['@']{'abc'} = 'abc', then 'Nothing is selected in the prompt' else 'this value in the prompt' end

  It works fine when only a single value is selected in the command prompt. When there are multiple values selected, it gives an error.

  Is there another trick to achieve this?

  Thank you!

  Instead of checking for is null or "variable presentation, it would be easy.

  just in case where to check it cool - bi.com you could get an idea of how validate the variable presentation.

  If brand aid

• default selection in the command prompt

  Hello
  
  With the help of obiee 11.1.1
  I created a variable presentation in the command prompt using sql result.
  
  Using this prompt in my... e anaysis.i which I use in the filter.
  
  Initailly when I run the dashboard because no value is selected in the filter performances without results found
  No results
  All data is not cause to the specified criteria.
  This is often due by applying filters and/or selections that are too restrictive or contain incorrect values. Please check your filters to analysis, and then try again. The currently applied filters are listed below.
  
  
  M_NAME is equivalent to / in VarMName
  
  Wharton I want is
  Scenario 1-> what to make sure the results no msg would not come and just the filter should be displayed.
  or
  Scenario 2 - display all the filter values in the report initially that is as if one has chosen the value of filter.
  or
  Scenario 3-> by default select one filter and show the result for this.
  
  I want to know how to do the 3 scenarios?
  
  Thank you

  Hello

  Similar to scenario 2 and 3 for me (may be mistaken) creating fast, you can set the default values for all the choices or any desired value so that the report can show for all values. But I was wondering where you use this variable presentation (I mean for the calculation or any other object)

  Scenario1 can be reached certain that using any results display in the results tab, but I'm not sure if you can show filters here or not. But when you don't get any results, there are cases where it shows what are the filter condition has been applied in the report.

  Phani.

• How to save passwords after you said 'no' to the command prompt

  How save passwords after you said 'never' at the command prompt.

  I tried again and again and again, and none of the solutions suggested on the internet works. And there is also something too complicated for me.

  Hi, jscher2000:

  Yes it's MARKET! Thank you very much for your help!

  I'm not all pages to remember my password I just want some specific pages to remember passwords. for example. for now I only need craigslist login page to remember my pw, not other login pages.

  If this is the case, then it is a perfect solution for me.

• Update Live from the command prompt

  Hello

  I create an executable whose purpose and to make the creation of a winPE bootable USB key easier.

  To create the key, I need to run multiple commands with the systemexec.vi. Many of these commands take ages at the end so I need to know whether or not the command is still in progress.

  What would be great is to have a live update from the command prompt. I guess there should be a way to insert the command line in a secondary or other container?

  

  Best regards

  Try to redirect the standard output to a file, as in this example:

  ping 192.168.0.46 > out.txt

  If your utility supports redirection, you can read the contents of the file at any time.

  Be careful to choose a working directory where your username has write permissions.

• XP Pro do not include USB drives in the command prompt, but are listed in my computer

  I'm having problems with my CD/DVD drive (not written) and I'm doing a bootable ISO... file flash memory this procedure requires using the command prompt: diskpart, list disk, etc. when I get home "list disk" all I get is the HARD drive... USB key is not there... it's listed in my computer and in the remove hardware in the system tray... even in the BIOS there is a USB bootable devices...

  Any help will be appreciated, because I need to see the flash memory in the command "list disk".

  Thanks in advance!

  Hi abbasbd,

  Follow the steps in the article.

  Advanced troubleshooting tips for General USB for Windows XP problems

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• How do you do the command prompt window stay open after running a command?

  OK, I feel stupid asking this, because I knew the answer before. I learn Visual C++ programming. The book I learn to write C++ and past then in details on the writing of the GUI from Visual C++ part. The book that I market me through compilation and to make an exe file in a cpp file, and then he said: go to the directory in Explorer and double click on the exe file. I do, and the command prompt appears a quick second before closing down. The example in the book shows the output, and the writer obviously has his guest configured to pause after executing an exe file.

  I just set up my guest to do the same thing, so I can at least see the results. I know that running the exe I wrote, but I would like to see the output for less than a second.

  I don't know how you code this. But if it's like a normal batch or whatever it is command line related.

  Follow these steps to use a switch defined by the user at the end of the script.

  To pause a file of DOS commands under Windows XP, continue to the next command, you can use the PAUSE command. Make request to the user with the text:

  Press any key to continue. . .

  Then the batch file is waiting for the user to press a button. However, if you want to pause a batch file and display anything? Simply redirect the results to no one as follows:

  pause > null

  Given that it is perhaps not very useful (how will the user know they need to press a key to continue the batch file?) you display a different prompt. Issue a command with your desired guest ECHO, and then issue the break preceding > no command.

  For example, to pause a batch file of Windows XP with the prompt "Press ENTER to run the command", use the following commands:

  echo press ENTER to run the command
  pause > null
  MCP. MCDST. LVL 80

• How to get connected through the recovery environment for the command prompt administrator privileges?

  Original title: how to make the command prompt as Administrator via dvd, USB system recovery / then to repair, recovery environment invites of commands in menu on win vista, win 7, win 8?

  Hello world?, please can someone tell me how do the command prompt as Administrator via/via menu environment of recovery with the option prompt orders..., that way I can activate the hidden administrator because I forgot my password of the computer... rather than editing the registry with the cmd... It says on the top of the command prompt x administrator cmd prompt and on the guest herself said x source then the guest... I thought that I can activate the admin hidden here coz he said administrator on the top of the program but it won't let me activate the admin hidden using this command: "net user administrator / Active. ": Yes" he says: successfully completed, but after I rebooted the computer the hidden admin did not appear on the menu of connection of users, I can activate the admin hidden with this command. "net user administrator / Active: Yes" through connection to a normal startup, then proceed to the command prompt with administrator previledge, but not through, dvd environment then recovery recovery menu system, the command line option... is one way or shortcut to the command prompt with admin previledge as the high cmd prompt the normal start standard? Please please help... I want to do coz I forgot my password for admin user computer, there is no other user account on the computer... "Please help, guru of the computer/engineers/programmers out there," and I thank you so much all the response I get, and God bless the guy more... «what I wanted to say that I can make the order: "net user administrator / Active: Yes" in the connection of nomal startup is coz I tried on another computer with windows vista 64 bit...» "but I forgot my computer password... I know how to edit the registry, although to allow the hidden via the recovery environment option administrator cmd menu but I want the shortcut... thank you once again,

  Hi Robert,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/itprovistasecurity/threads

  Hope this information helps.